diff options
| author | Timur Tabi <timur@freescale.com> | 2008-02-08 13:15:55 -0600 |
|---|---|---|
| committer | Kim Phillips <kim.phillips@freescale.com> | 2008-03-25 19:16:43 -0500 |
| commit | 89c7784ed90ba50301eec521144f95111e472906 (patch) | |
| tree | 6e2ed88c42e80fbc454de5de9337d53c1cfc9ad1 /board/freescale | |
| parent | b55d98c6d5b8694e560a0e727b14cb6921d7cfcc (diff) | |
| download | u-boot-imx-89c7784ed90ba50301eec521144f95111e472906.zip u-boot-imx-89c7784ed90ba50301eec521144f95111e472906.tar.gz u-boot-imx-89c7784ed90ba50301eec521144f95111e472906.tar.bz2 | |
83xx: Add Vitesse VSC7385 firmware uploading
Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
Cleaned up the board header files to make selecting the VSC7385 easier to
control.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Diffstat (limited to 'board/freescale')
| -rw-r--r-- | board/freescale/mpc8313erdb/mpc8313erdb.c | 21 | ||||
| -rw-r--r-- | board/freescale/mpc8349itx/mpc8349itx.c | 15 | ||||
| -rw-r--r-- | board/freescale/mpc837xerdb/mpc837xerdb.c | 27 |
3 files changed, 57 insertions, 6 deletions
diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c index 42019fb..7cbdb7b 100644 --- a/board/freescale/mpc8313erdb/mpc8313erdb.c +++ b/board/freescale/mpc8313erdb/mpc8313erdb.c @@ -28,6 +28,7 @@ #endif #include <pci.h> #include <mpc83xx.h> +#include <vsc7385.h> DECLARE_GLOBAL_DATA_PTR; @@ -98,6 +99,26 @@ void pci_init_board(void) mpc83xx_pci_init(1, reg, warmboot); } +/* + * Miscellaneous late-boot configurations + * + * If a VSC7385 microcode image is present, then upload it. +*/ +int misc_init_r(void) +{ + int rc = 0; + +#ifdef CONFIG_VSC7385_IMAGE + if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, + CONFIG_VSC7385_IMAGE_SIZE)) { + puts("Failure uploading VSC7385 microcode.\n"); + rc = 1; + } +#endif + + return rc; +} + #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c index 972361f..704f963 100644 --- a/board/freescale/mpc8349itx/mpc8349itx.c +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -25,6 +25,7 @@ #include <mpc83xx.h> #include <i2c.h> #include <miiphy.h> +#include <vsc7385.h> #ifdef CONFIG_PCI #include <asm/mpc8349_pci.h> #include <pci.h> @@ -177,7 +178,7 @@ int checkboard(void) */ int misc_init_f(void) { -#ifdef CONFIG_VSC7385 +#ifdef CONFIG_VSC7385_ENET volatile u32 *vsc7385_cpuctrl; /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up @@ -239,6 +240,8 @@ int misc_init_f(void) } /* + * Miscellaneous late-boot configurations + * * Make sure the EEPROM has the HRCW correctly programmed. * Make sure the RTC is correctly programmed. * @@ -250,6 +253,8 @@ int misc_init_f(void) * * This function makes sure that the I2C EEPROM is programmed * correctly. + * + * If a VSC7385 microcode image is present, then upload it. */ int misc_init_r(void) { @@ -375,6 +380,14 @@ int misc_init_r(void) i2c_set_bus_num(orig_bus); #endif +#ifdef CONFIG_VSC7385_IMAGE + if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, + CONFIG_VSC7385_IMAGE_SIZE)) { + puts("Failure uploading VSC7385 microcode.\n"); + rc = 1; + } +#endif + return rc; } diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index bed0fc3..a3b20b8 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -16,6 +16,8 @@ #include <i2c.h> #include <asm/io.h> #include <spd_sdram.h> +#include <vsc7385.h> + #if defined(CFG_DRAM_TEST) int @@ -56,11 +58,6 @@ testdram(void) } #endif -int board_early_init_f(void) -{ - return 0; -} - #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) void ddr_enable_ecc(unsigned int dram_size); #endif @@ -135,6 +132,26 @@ int checkboard(void) return 0; } +/* + * Miscellaneous late-boot configurations + * + * If a VSC7385 microcode image is present, then upload it. +*/ +int misc_init_r(void) +{ + int rc = 0; + +#ifdef CONFIG_VSC7385_IMAGE + if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, + CONFIG_VSC7385_IMAGE_SIZE)) { + puts("Failure uploading VSC7385 microcode.\n"); + rc = 1; + } +#endif + + return rc; +} + #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) |