powerpc/t1024rdb: Add T1024 RDB board support

T1024RDB is a Freescale Reference Design Board that hosts the T1024 SoC.

T1024RDB board Overview
-----------------------
- T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
- CoreNet fabric supporting coherent and noncoherent transactions with
  prioritization and bandwidth allocation
- 32-/64-bit DDR3L SDRAM memory controller with ECC and interleaving support
- Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
- Ethernet interfaces:
  - Two 10M/100M/1G RGMII ports on-board
  - one 10Gbps XFI interface
- PCIe: Three PCIe controllers: one PCIe Slot and two Mini-PCIe connectors.
- SerDes: 4 lanes up to 10.3125GHz
- IFC: 128MB NOR Flash, 512MB NAND Flash and CPLD
- eSPI: 64MB N25Q512 SPI flash.
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
- USB: Two  Type-A USB2.0 ports with internal PHY
- eSDHC: Support SD, SDHC, SDXC and MMC/eMMC
- I2C: Four I2C controllers
- UART: Two UART serial ports

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
	   Fix Kconfig by adding SUPPORT_SPL]
Reviewed-by: York Sun <yorksun@freescale.com>

1 files changed, 258 insertions, 0 deletions

diff --git a/board/freescale/t102xrdb/README b/board/freescale/t102xrdb/README
new file mode 100644
index 0000000..2b17f50
--- /dev/null
+++ b/board/freescale/t102xrdb/README
@@ -0,0 +1,258 @@
+T1024 SoC Overview
+------------------
+The T1024/T1023 dual core and T1014/T1013 single core QorIQ communication processor
+combines two or one 64-bit Power Architecture e5500 core respectively with high
+performance datapath acceleration logic, and network peripheral bus interfaces
+required for networking and telecommunications. This processor can be used in
+applications such as enterprise WLAN access points, routers, switches, firewall
+and other packet processing intensive small enterprise and branch office appliances,
+and general-purpose embedded computing. Its high level of integration offers
+significant performance benefits and greatly helps to simplify board design.
+
+
+The T1024 SoC includes the following function and features:
+- two e5500 cores, each with a private 256 KB L2 cache
+  - Up to 1.4 GHz with 64-bit ISA support (Power Architecture v2.06-compliant)
+  - Three levels of instructions: User, supervisor, and hypervisor
+  - Independent boot and reset
+  - Secure boot capability
+- 256 KB shared L3 CoreNet platform cache (CPC)
+- Interconnect CoreNet platform
+  - CoreNet coherency manager supporting coherent and noncoherent transactions
+    with prioritization and bandwidth allocation amongst CoreNet endpoints
+  - 150 Gbps coherent read bandwidth
+- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
+- Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions:
+  - Packet parsing, classification, and distribution
+  - Queue management for scheduling, packet sequencing, and congestion management
+  - Cryptography Acceleration (SEC 5.x)
+  - IEEE 1588 support
+  - Hardware buffer management for buffer allocation and deallocation
+  - MACSEC on DPAA-based Ethernet ports
+- Ethernet interfaces
+  - Four 1 Gbps Ethernet controllers
+- Parallel Ethernet interfaces
+  - Two RGMII interfaces
+- High speed peripheral interfaces
+  - Three PCI Express 2.0 controllers/ports running at up to 5 GHz
+  - One SATA controller supporting 1.5 and 3.0 Gb/s operation
+  - One QSGMII interface
+  - Four SGMII interface supporting 1000 Mbps
+  - Three SGMII interfaces supporting up to 2500 Mbps
+  - 10GbE XFI or 10Base-KR interface
+- Additional peripheral interfaces
+  - Two USB 2.0 controllers with integrated PHY
+  - SD/eSDHC/eMMC
+  - eSPI controller
+  - Four I2C controllers
+  - Four UARTs
+  - Four GPIO controllers
+  - Integrated flash controller (IFC)
+  - LCD interface (DIU) with 12 bit dual data rate
+- Multicore programmable interrupt controller (PIC)
+- Two 8-channel DMA engines
+- Single source clocking implementation
+- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
+- QUICC Engine block
+  - 32-bit RISC controller for flexible support of the communications peripherals
+  - Serial DMA channel for receive and transmit on all serial channels
+  - Two universal communication controllers, supporting TDM, HDLC, and UART
+
+T1023 Personality
+------------------
+T1023 is a reduced personality of T1024 without QUICC Engine, DIU, and
+unavailable deep sleep. Rest of the blocks are almost same as T1024.
+Differences between T1024 and T1023
+Feature		T1024  T1023
+QUICC Engine:	yes    no
+DIU:		yes    no
+Deep Sleep:	yes    no
+I2C controller: 4      3
+DDR:		64-bit 32-bit
+IFC:		32-bit 28-bit
+
+
+T1024RDB board Overview
+-----------------------
+ - Ethernet
+     - Two on-board 10M/100M/1G bps RGMII ethernet ports
+     - One on-board 10G bps Base-T port.
+ - DDR Memory
+     - Supports 64-bit 4GB DDR3L DIMM
+ - PCIe
+     - One on-board PCIe slot.
+     - Two on-board PCIe Mini-PCIe connectors.
+ - IFC/Local Bus
+     - NOR:  128MB 16-bit NOR Flash
+     - NAND: 1GB 8-bit NAND flash
+     - CPLD: for system controlling with programable header on-board
+ - USB
+     - Supports two USB 2.0 ports with integrated PHYs
+     - Two type A ports with 5V@1.5A per port.
+ - SDHC
+     - one SD connector supporting 1.8V/3.3V via J53.
+ - SPI
+     -  On-board 64MB SPI flash
+ - Other
+     - Two Serial ports
+     - Four I2C ports
+
+
+Memory map on T1024RDB
+----------------------
+Start Address  End Address      Description			Size
+0xF_FFDF_0000  0xF_FFDF_0FFF    IFC - CPLD			4KB
+0xF_FF80_0000  0xF_FF80_FFFF    IFC - NAND Flash		64KB
+0xF_FE00_0000  0xF_FEFF_FFFF    CCSRBAR				16MB
+0xF_F802_0000  0xF_F802_FFFF    PCI Express 3 I/O Space		64KB
+0xF_F801_0000  0xF_F801_FFFF    PCI Express 2 I/O Space		64KB
+0xF_F800_0000  0xF_F800_FFFF    PCI Express 1 I/O Space		64KB
+0xF_F600_0000  0xF_F7FF_FFFF    Queue manager software portal   32MB
+0xF_F400_0000  0xF_F5FF_FFFF    Buffer manager software portal  32MB
+0xF_E800_0000  0xF_EFFF_FFFF    IFC - NOR Flash			128MB
+0xF_0000_0000  0xF_003F_FFFF    DCSR				4MB
+0xC_2000_0000  0xC_2FFF_FFFF    PCI Express 3 Mem Space		256MB
+0xC_1000_0000  0xC_1FFF_FFFF    PCI Express 2 Mem Space		256MB
+0xC_0000_0000  0xC_0FFF_FFFF    PCI Express 1 Mem Space		256MB
+0x0_0000_0000  0x0_ffff_ffff    DDR				4GB
+
+
+128MB NOR Flash memory Map
+--------------------------
+Start Address   End Address     Definition			Max size
+0xEFF40000      0xEFFFFFFF      u-boot (current bank)		768KB
+0xEFF20000      0xEFF3FFFF      u-boot env (current bank)	128KB
+0xEFF00000      0xEFF1FFFF      FMAN Ucode (current bank)	128KB
+0xEFE00000      0xEFE3FFFF      QE firmware (current bank)	256KB
+0xED300000      0xEFEFFFFF      rootfs (alt bank)		44MB
+0xEC800000      0xEC8FFFFF      Hardware device tree (alt bank) 1MB
+0xEC020000      0xEC7FFFFF      Linux.uImage (alt bank)		7MB + 875KB
+0xEC000000      0xEC01FFFF      RCW (alt bank)			128KB
+0xEBF40000      0xEBFFFFFF      u-boot (alt bank)		768KB
+0xEBF20000      0xEBF3FFFF      u-boot env (alt bank)		128KB
+0xEBF00000      0xEBF1FFFF      FMAN ucode (alt bank)		128KB
+0xEBE00000      0xEBE3FFFF      QE firmware (alt bank)		256KB
+0xE9300000      0xEBEFFFFF      rootfs (current bank)		44MB
+0xE8800000      0xE88FFFFF      Hardware device tree (cur bank) 1MB
+0xE8020000      0xE86FFFFF      Linux.uImage (current bank)	7MB + 875KB
+0xE8000000      0xE801FFFF      RCW (current bank)		128KB
+
+
+T1024 Clock frequency
+---------------------
+BIN   Core     DDR       Platform  FMan
+Bin1: 1400MHz  1600MT/s  400MHz    700MHz
+Bin2: 1200MHz  1600MT/s  400MHz    600MHz
+Bin3: 1000MHz  1600MT/s  400MHz    500MHz
+
+
+Software configurations and board settings
+------------------------------------------
+1. NOR boot:
+   a. build NOR boot image
+	$  make T1024RDB_defconfig
+	$  make
+   b. program u-boot.bin image to NOR flash
+	=> tftp 1000000 u-boot.bin
+	=> pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
+	set SW1[1:8] = '00010011', SW2[1] = '1', SW3[4] = '0' for NOR boot
+
+   Switching between default bank0 and alternate bank4 on NOR flash
+   To change boot source to vbank4:
+        via software:   run command 'cpld reset altbank' in u-boot.
+        via DIP-switch: set SW3[5:7] = '100'
+
+   To change boot source to vbank0:
+        via software:   run command 'cpld reset' in u-boot.
+        via DIP-Switch: set SW3[5:7] = '000'
+
+2. NAND Boot:
+   a. build PBL image for NAND boot
+	$ make T1024RDB_NAND_defconfig
+	$ make
+   b. program u-boot-with-spl-pbl.bin to NAND flash
+	=> tftp 1000000 u-boot-with-spl-pbl.bin
+	=> nand erase 0 $filesize
+	=> nand write 1000000 0 $filesize
+	set SW1[1:8] = '10001000', SW2[1] = '1', SW3[4] = '1' for NAND boot
+
+3. SPI Boot:
+   a. build PBL image for SPI boot
+	$ make T1024RDB_SPIFLASH_defconfig
+	$ make
+   b. program u-boot-with-spl-pbl.bin to SPI flash
+	=> tftp 1000000 u-boot-with-spl-pbl.bin
+	=> sf probe 0
+	=> sf erase 0 f0000
+	=> sf write 1000000 0 $filesize
+	set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
+
+4. SD Boot:
+   a. build PBL image for SD boot
+	$ make T1024RDB_SDCARD_defconfig
+	$ make
+   b. program u-boot-with-spl-pbl.bin to SD/MMC card
+	=> tftp 1000000 u-boot-with-spl-pbl.bin
+	=> mmc write 1000000 8 0x800
+	=> tftp 1000000 fsl_fman_ucode_t1024_xx.bin
+	=> mmc write 1000000 0x820 80
+	set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
+
+
+2-stage NAND/SPI/SD boot loader
+-------------------------------
+PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
+SPL further initializes DDR using SPD and environment variables
+and copy u-boot(768 KB) from NAND/SPI/SD device to DDR.
+Finally SPL transers control to u-boot for futher booting.
+
+SPL has following features:
+ - Executes within 256K
+ - No relocation required
+
+Run time view of SPL framework
+-------------------------------------------------
+|Area		   | Address			|
+-------------------------------------------------
+|SecureBoot header | 0xFFFC0000 (32KB)		|
+-------------------------------------------------
+|GD, BD		   | 0xFFFC8000 (4KB)		|
+-------------------------------------------------
+|ENV		   | 0xFFFC9000 (8KB)		|
+-------------------------------------------------
+|HEAP		   | 0xFFFCB000 (30KB)		|
+-------------------------------------------------
+|STACK		   | 0xFFFD8000 (22KB)		|
+-------------------------------------------------
+|U-boot SPL	   | 0xFFFD8000 (160KB)		|
+-------------------------------------------------
+
+NAND Flash memory Map on T1024RDB
+-------------------------------------------------------------
+Start		End		Definition	Size
+0x000000	0x0FFFFF	u-boot		1MB(2 block)
+0x100000	0x17FFFF	u-boot env	512KB(1 block)
+0x180000	0x1FFFFF	FMAN Ucode	512KB(1 block)
+0x200000	0x27FFFF	QE Firmware	512KB(1 block)
+
+
+SD Card memory Map on T1024RDB
+----------------------------------------------------
+Block		#blocks		Definition	Size
+0x008		2048		u-boot img	1MB
+0x800		0016		u-boot env	8KB
+0x820		0256		FMAN Ucode	128KB
+0x920		0256		QE Firmware	128KB
+
+
+SPI Flash memory Map on T1024RDB
+----------------------------------------------------
+Start		End		Definition	Size
+0x000000	0x0FFFFF	u-boot img	1MB
+0x100000	0x101FFF	u-boot env	8KB
+0x110000	0x12FFFF	FMAN Ucode	128KB
+0x130000	0x14FFFF	QE Firmware	128KB
+
+
+For more details, please refer to T1024RDB Reference Manual and access
+website www.freescale.com and Freescale QorIQ SDK Infocenter document.