diff options
| author | Roy Zang <tie-fei.zang@freescale.com> | 2011-02-04 13:42:45 -0600 |
|---|---|---|
| committer | Kumar Gala <galak@kernel.crashing.org> | 2011-09-29 19:01:05 -0500 |
| commit | fe1a1da038c7ba7919ab187ba4c2a797cb0853aa (patch) | |
| tree | e235a09082b22cbc700d887cc6e0457892c73d8b /board/freescale/p1023rds | |
| parent | cba4614862c15b2199f412520de1994da33c013c (diff) | |
| download | u-boot-imx-fe1a1da038c7ba7919ab187ba4c2a797cb0853aa.zip u-boot-imx-fe1a1da038c7ba7919ab187ba4c2a797cb0853aa.tar.gz u-boot-imx-fe1a1da038c7ba7919ab187ba4c2a797cb0853aa.tar.bz2 | |
powerpc/85xx: Add networking support to P1023RDS
The P1023 has two 1G ethernet controllers the first can run in
SGMII, RGMII, or RMII. The second can only do SGMII & RGMII.
We need to setup a for SoC & board registers based on our various
configuration for ethernet to function properly on the board.
Removed CONFIG_SYS_FMAN_FW as its not used anywhere.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Lei Xu <B33228@freescale.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com>
Signed-off-by: Shaohui Xie <b21989@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'board/freescale/p1023rds')
| -rw-r--r-- | board/freescale/p1023rds/p1023rds.c | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c index 8cfd199..546819c 100644 --- a/board/freescale/p1023rds/p1023rds.c +++ b/board/freescale/p1023rds/p1023rds.c @@ -38,6 +38,11 @@ #include <fdt_support.h> #include <netdev.h> #include <malloc.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <miiphy.h> +#include <phy.h> +#include <asm/fsl_dtsec.h> #include "bcsr.h" @@ -143,6 +148,39 @@ unsigned long get_board_ddr_clk(ulong dummy) int board_eth_init(bd_t *bis) { + u8 *bcsr = (u8 *)BCSR_ACCESS_REG_ADDR; + ccsr_gur_t *gur = (ccsr_gur_t *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + struct fsl_pq_mdio_info dtsec_mdio_info; + + /* + * Need to set dTSEC 1 pin multiplexing to TSEC. The default setting + * is not correct. + */ + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TSEC1_1); + + dtsec_mdio_info.regs = + (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; + dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the 1G MDIO bus */ + fsl_pq_mdio_init(bis, &dtsec_mdio_info); + + fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); + + fm_info_set_mdio(FM1_DTSEC1, + miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); + fm_info_set_mdio(FM1_DTSEC2, + miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); + + /* Make SERDES connected to SGMII by cleaing bcsr19[7] */ + if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_SGMII) + clrbits_8(&bcsr[19], BCSR19_SGMII_SEL_L); + +#ifdef CONFIG_FMAN_ENET + cpu_eth_init(bis); +#endif + return pci_eth_init(bis); } @@ -158,5 +196,7 @@ void ft_board_setup(void *blob, bd_t *bd) size = getenv_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); + + fdt_fixup_fman_ethernet(blob); } #endif |