summaryrefslogtreecommitdiff
path: root/board/freescale/mx6sxsabresd
diff options
context:
space:
mode:
authorPeng Fan <Peng.Fan@freescale.com>2014-10-31 11:08:06 +0800
committerStefano Babic <sbabic@denx.de>2014-11-20 10:13:53 +0100
commit05095535f6cab041a8c3007f6feae095a497bb92 (patch)
treedfcba243c1424fbb773ca647fd6f1716b73f4553 /board/freescale/mx6sxsabresd
parent7a139959d0de14a7efd0fe12b49b18e939468525 (diff)
downloadu-boot-imx-05095535f6cab041a8c3007f6feae095a497bb92.zip
u-boot-imx-05095535f6cab041a8c3007f6feae095a497bb92.tar.gz
u-boot-imx-05095535f6cab041a8c3007f6feae095a497bb92.tar.bz2
imx:mx6sxsabresd fix pfuz probe failed
The PFUZ probe failed with the following msg: " wait_for_sr_state: failed sr=81 cr=a0 state=2020 i2c_init_transfer: failed for chip 0x8 retry=0 wait_for_sr_state: failed sr=81 cr=a0 state=2020 i2c_init_transfer: failed for chip 0x8 retry=1 wait_for_sr_state: failed sr=81 cr=a0 state=2020 i2c_init_transfer: failed for chip 0x8 retry=2 i2c_init_transfer: give up i2c_regs=021a0000 Can't find PMIC:PFUZE100 " board_early_init_f is too early to call i2c related setting, because init_func_i2c is called after board_early_init_f being invoked. Thus move setup_i2c into board_init. Also PFUZ is connected to I2C bus 0, so change "1" -> "0". Using this patch PFUZ can be correctly probed: "PMIC: PFUZE100 ID=0x11" Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'board/freescale/mx6sxsabresd')
-rw-r--r--board/freescale/mx6sxsabresd/mx6sxsabresd.c5
1 files changed, 4 insertions, 1 deletions
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 68d3718..256ea29 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -243,7 +243,6 @@ int board_phy_config(struct phy_device *phydev)
int board_early_init_f(void)
{
setup_iomux_uart();
- setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
/* Enable PERI_3V3, which is used by SD2, ENET, LVDS, BT */
imx_iomux_v3_setup_multiple_pads(peri_3v3_pads,
@@ -277,6 +276,10 @@ int board_init(void)
/* Address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+#ifdef CONFIG_SYS_I2C_MXC
+ setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+#endif
+
return 0;
}