diff options
author | Bai Ping <b51503@freescale.com> | 2015-10-30 03:14:47 +0800 |
---|---|---|
committer | Bai Ping <b51503@freescale.com> | 2015-10-30 22:28:39 +0800 |
commit | 3c38fae6dafd3b90fae2598dcbedf6cb7aa6f6af (patch) | |
tree | f2d4fe9e7175ca1bb85cca48240a874357e24ff2 /board/freescale/mx6sabresd/mx6sabresd.c | |
parent | 55a80625e81ea9ff5a5286f1d2183a2f0900f5c3 (diff) | |
download | u-boot-imx-3c38fae6dafd3b90fae2598dcbedf6cb7aa6f6af.zip u-boot-imx-3c38fae6dafd3b90fae2598dcbedf6cb7aa6f6af.tar.gz u-boot-imx-3c38fae6dafd3b90fae2598dcbedf6cb7aa6f6af.tar.bz2 |
MLK-11795-02 imx: upate the pmic standby voltage for imx6qp
According to the latest datasheet(Rev. B, 07/2015), the VDD_SOC_IN
standby voltage should be 1.05V and on i.MX6QP, we can use the PMIC
'APS' mode in standby. we add a 25mV margin to cover the IR drop and
board tolerance, so the standby voltage of VDD_SOC_IN should be
setting to 1.075V.
Signed-off-by: Bai Ping <b51503@freescale.com>
Diffstat (limited to 'board/freescale/mx6sabresd/mx6sabresd.c')
-rw-r--r-- | board/freescale/mx6sabresd/mx6sabresd.c | 10 |
1 files changed, 7 insertions, 3 deletions
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 8d45c8c..6ef5131 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -978,7 +978,11 @@ int power_init_board(void) if (!pfuze) return -ENODEV; - ret = pfuze_mode_init(pfuze, APS_PFM); + if (is_mx6dqp()) + ret = pfuze_mode_init(pfuze, APS_APS); + else + ret = pfuze_mode_init(pfuze, APS_PFM); + if (ret < 0) return ret; @@ -995,10 +999,10 @@ int power_init_board(void) pmic_reg_write(pfuze, PFUZE100_VGEN5VOL, reg); if (is_mx6dqp()) { - /* set SW1C staby volatage 0.975V*/ + /* set SW1C staby volatage 1.075V*/ pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, ®); reg &= ~0x3f; - reg |= 0x1b; + reg |= 0x1f; pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg); /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */ |