ENGR00315499-10 ARM:imx6:sabresd/sabreauto Add android fastboot supporting

Support android features:
fastboot, booti command and recovery for sabresd SD, sabresd eMMC,
sabreauto SD, sabreauto NAND.

For all booting media (SD, eMMC, NAND), inherits the partitions layout
from v2009.08. Fastboot will detect the booting media to replace
hardcoding fastboot device. SATA is not supported.

FDT is supported to use the "unused" fields in bootimg header which
requires the FDT to be combined into the boot.img.
For non-FDT boot.img, the "unused" fields should left to NULL and is
compatible to boot.

Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>

1 files changed, 127 insertions, 0 deletions

diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index b530fb9..7fdfe0e 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -24,6 +24,13 @@
 #include <asm/arch/sys_proto.h>
 #include <i2c.h>
 
+#ifdef CONFIG_FASTBOOT
+#include <fastboot.h>
+#ifdef CONFIG_ANDROID_RECOVERY
+#include <recovery.h>
+#endif
+#endif /*CONFIG_FASTBOOT*/
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
@@ -310,6 +317,126 @@ int board_late_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_FASTBOOT
+
+void board_fastboot_setup(void)
+{
+	switch (get_boot_device()) {
+#if defined(CONFIG_FASTBOOT_STORAGE_SATA)
+	case SATA_BOOT:
+		if (!getenv("fastboot_dev"))
+			setenv("fastboot_dev", "sata");
+		if (!getenv("bootcmd"))
+			setenv("bootcmd", "booti sata");
+		break;
+#endif /*CONFIG_FASTBOOT_STORAGE_SATA*/
+#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
+	case SD1_BOOT:
+	case MMC1_BOOT:
+		if (!getenv("fastboot_dev"))
+			setenv("fastboot_dev", "mmc0");
+		if (!getenv("bootcmd"))
+			setenv("bootcmd", "booti mmc0");
+		break;
+	case SD3_BOOT:
+	case MMC3_BOOT:
+		if (!getenv("fastboot_dev"))
+			setenv("fastboot_dev", "mmc1");
+		if (!getenv("bootcmd"))
+			setenv("bootcmd", "booti mmc1");
+		break;
+#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
+#if defined(CONFIG_FASTBOOT_STORAGE_NAND)
+	case NAND_BOOT:
+		if (!getenv("fastboot_dev"))
+			setenv("fastboot_dev", "nand");
+		if (!getenv("fbparts"))
+			setenv("fbparts",
+			 "16m@16m(boot) 128m@32m(recovery) 810m@160m(android_root)ubifs");
+		if (!getenv("bootcmd"))
+			setenv("bootcmd",
+				"nand read ${loadaddr} ${boot_nand_offset} "
+				"${boot_nand_size};booti ${loadaddr}");
+		break;
+#endif /*CONFIG_FASTBOOT_STORAGE_NAND*/
+	default:
+		printf("unsupported boot devices\n");
+		break;
+	}
+}
+
+#ifdef CONFIG_ANDROID_RECOVERY
+
+#define GPIO_VOL_DN_KEY IMX_GPIO_NR(5, 14)
+iomux_v3_cfg_t const recovery_key_pads[] = {
+	(MX6_PAD_DISP0_DAT20__GPIO_5_14 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+int check_recovery_cmd_file(void)
+{
+	int button_pressed = 0;
+	int recovery_mode = 0;
+
+	recovery_mode = recovery_check_and_clean_flag();
+
+	/* Check Recovery Combo Button press or not. */
+	imx_iomux_v3_setup_multiple_pads(recovery_key_pads,
+		ARRAY_SIZE(recovery_key_pads));
+
+	gpio_direction_input(GPIO_VOL_DN_KEY);
+
+	if (gpio_get_value(GPIO_VOL_DN_KEY) == 0) { /* VOL_DN key is low assert */
+		button_pressed = 1;
+		printf("Recovery key pressed\n");
+	}
+
+	return recovery_mode || button_pressed;
+}
+
+void board_recovery_setup(void)
+{
+	int bootdev = get_boot_device();
+
+	switch (bootdev) {
+#if defined(CONFIG_FASTBOOT_STORAGE_SATA)
+	case SATA_BOOT:
+		if (!getenv("bootcmd_android_recovery"))
+			setenv("bootcmd_android_recovery", "booti sata recovery");
+		break;
+#endif /*CONFIG_FASTBOOT_STORAGE_SATA*/
+#if defined(CONFIG_FASTBOOT_STORAGE_MMC)
+	case SD1_BOOT:
+	case MMC1_BOOT:
+		if (!getenv("bootcmd_android_recovery"))
+			setenv("bootcmd_android_recovery", "booti mmc0 recovery");
+		break;
+	case SD3_BOOT:
+	case MMC3_BOOT:
+		if (!getenv("bootcmd_android_recovery"))
+			setenv("bootcmd_android_recovery", "booti mmc1 recovery");
+		break;
+#endif /*CONFIG_FASTBOOT_STORAGE_MMC*/
+#if defined(CONFIG_FASTBOOT_STORAGE_NAND)
+	case NAND_BOOT:
+		if (!getenv("bootcmd_android_recovery"))
+			setenv("bootcmd_android_recovery",
+				"nand read ${loadaddr} ${recovery_nand_offset} "
+				"${recovery_nand_size};booti ${loadaddr}");
+		break;
+#endif /*CONFIG_FASTBOOT_STORAGE_NAND*/
+	default:
+		printf("Unsupported bootup device for recovery: dev: %d\n",
+			bootdev);
+		return;
+	}
+
+	printf("setup env for recovery..\n");
+	setenv("bootcmd", "run bootcmd_android_recovery");
+}
+#endif /*CONFIG_ANDROID_RECOVERY*/
+
+#endif /*CONFIG_FASTBOOT*/
+
 int checkboard(void)
 {
 	int rev = mx6sabre_rev();