summaryrefslogtreecommitdiff
path: root/board/freescale/mpc8569mds
diff options
context:
space:
mode:
authorAnton Vorontsov <avorontsov@ru.mvista.com>2009-10-15 17:47:06 +0400
committerKumar Gala <galak@kernel.crashing.org>2009-10-27 09:36:48 -0500
commit7f52ed5ef1b490da282ace3316be381a6abf96a5 (patch)
tree775e133205d0440cb47776e4b64a0442c339b1d8 /board/freescale/mpc8569mds
parent48618126f78f05042dae428811809b594f747eb9 (diff)
downloadu-boot-imx-7f52ed5ef1b490da282ace3316be381a6abf96a5.zip
u-boot-imx-7f52ed5ef1b490da282ace3316be381a6abf96a5.tar.gz
u-boot-imx-7f52ed5ef1b490da282ace3316be381a6abf96a5.tar.bz2
mpc85xx: Add eSDHC support for MPC8569E-MDS boards
eSDHC is mutually exlusive with UART0 (in 4-bits mode) and I2C2 (in 1-bit mode). When eSDHC is used, we should switch u-boot console to UART1, and make the proper device-tree fixups. Because of an erratum in prototype boards it is impossible to use eSDHC without disabling UART0 (which makes it quite easy to 'brick' the board by simply issung 'setenv hwconfig esdhc', and not able to interact with U-Boot anylonger). So, but default we assume that the board is a prototype, which is a most safe assumption. There is no way to determine board revision from a register, so we use hwconfig. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'board/freescale/mpc8569mds')
-rw-r--r--board/freescale/mpc8569mds/bcsr.h3
-rw-r--r--board/freescale/mpc8569mds/mpc8569mds.c116
2 files changed, 118 insertions, 1 deletions
diff --git a/board/freescale/mpc8569mds/bcsr.h b/board/freescale/mpc8569mds/bcsr.h
index c4738d7..2ed57d8 100644
--- a/board/freescale/mpc8569mds/bcsr.h
+++ b/board/freescale/mpc8569mds/bcsr.h
@@ -33,7 +33,8 @@
#define BCSR6_UPC1_POS_EN 0x40
#define BCSR6_UPC1_ADDR_EN 0x20
#define BCSR6_UPC1_DEV2 0x10
-#define BCSR6_SD_ENABLE 0x04
+#define BCSR6_SD_CARD_1BIT 0x08
+#define BCSR6_SD_CARD_4BITS 0x04
#define BCSR6_TDM2G_EN 0x02
#define BCSR6_UCC7_RMII_EN 0x01
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index cc88731..2d07922 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -23,6 +23,7 @@
*/
#include <common.h>
+#include <hwconfig.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/mmu.h>
@@ -35,6 +36,7 @@
#include <ioports.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <fsl_esdhc.h>
#include "bcsr.h"
@@ -303,6 +305,119 @@ local_bus_init(void)
out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000);
}
+#ifdef CONFIG_FSL_ESDHC
+
+/*
+ * Because of an erratum in prototype boards it is impossible to use eSDHC
+ * without disabling UART0 (which makes it quite easy to 'brick' the board
+ * by simply issung 'setenv hwconfig esdhc', and not able to interact with
+ * U-Boot anylonger).
+ *
+ * So, but default we assume that the board is a prototype, which is a most
+ * safe assumption. There is no way to determine board revision from a
+ * register, so we use hwconfig.
+ */
+
+static int prototype_board(void)
+{
+ if (hwconfig_subarg("board", "rev", NULL))
+ return hwconfig_subarg_cmp("board", "rev", "prototype");
+ return 1;
+}
+
+static int esdhc_disables_uart0(void)
+{
+ return prototype_board() ||
+ hwconfig_subarg_cmp("esdhc", "mode", "4-bits");
+}
+
+int board_mmc_init(bd_t *bd)
+{
+ struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
+ u8 bcsr6 = BCSR6_SD_CARD_1BIT;
+
+ if (!hwconfig("esdhc"))
+ return 0;
+
+ printf("Enabling eSDHC...\n"
+ " For eSDHC to function, I2C2 ");
+ if (esdhc_disables_uart0()) {
+ printf("and UART0 should be disabled.\n");
+ printf(" Redirecting stderr, stdout and stdin to UART1...\n");
+ console_assign(stderr, "eserial1");
+ console_assign(stdout, "eserial1");
+ console_assign(stdin, "eserial1");
+ printf("Switched to UART1 (initial log has been printed to "
+ "UART0).\n");
+ bcsr6 |= BCSR6_SD_CARD_4BITS;
+ } else {
+ printf("should be disabled.\n");
+ }
+
+ /* Assign I2C2 signals to eSDHC. */
+ clrsetbits_be32(&gur->plppar1, PLPPAR1_I2C_BIT_MASK,
+ PLPPAR1_ESDHC_VAL);
+ clrsetbits_be32(&gur->plpdir1, PLPDIR1_I2C_BIT_MASK,
+ PLPDIR1_ESDHC_VAL);
+
+ /* Mux I2C2 (and optionally UART0) signals to eSDHC. */
+ setbits_8(&bcsr[6], bcsr6);
+
+ return fsl_esdhc_mmc_init(bd);
+}
+
+static void fdt_board_fixup_esdhc(void *blob, bd_t *bd)
+{
+ const char *status = "disabled";
+ int off;
+ int err;
+
+ if (!hwconfig("esdhc"))
+ return;
+
+ if (!esdhc_disables_uart0())
+ goto disable_i2c2;
+
+ off = fdt_path_offset(blob, "serial0");
+ if (off < 0) {
+ printf("WARNING: could not find serial0 alias: %s.\n",
+ fdt_strerror(off));
+ goto disable_i2c2;
+ }
+
+ err = fdt_setprop(blob, off, "status", status, strlen(status) + 1);
+ if (err) {
+ printf("WARNING: could not set status for serial0: %s.\n",
+ fdt_strerror(err));
+ return;
+ }
+
+disable_i2c2:
+ off = -1;
+ while (1) {
+ const u32 *idx;
+ int len;
+
+ off = fdt_node_offset_by_compatible(blob, off, "fsl-i2c");
+ if (off < 0)
+ break;
+
+ idx = fdt_getprop(blob, off, "cell-index", &len);
+ if (!idx || len != sizeof(*idx))
+ continue;
+
+ if (*idx == 1) {
+ fdt_setprop(blob, off, "status", status,
+ strlen(status) + 1);
+ break;
+ }
+ }
+}
+#else
+static inline void fdt_board_fixup_esdhc(void *blob, bd_t *bd) {}
+#endif
+
#ifdef CONFIG_PCIE1
static struct pci_controller pcie1_hose;
#endif /* CONFIG_PCIE1 */
@@ -444,5 +559,6 @@ void ft_board_setup(void *blob, bd_t *bd)
#ifdef CONFIG_PCIE1
ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
#endif
+ fdt_board_fixup_esdhc(blob, bd);
}
#endif