summaryrefslogtreecommitdiff
path: root/board/freescale/mpc837xemds
diff options
context:
space:
mode:
authorAnton Vorontsov <avorontsov@ru.mvista.com>2009-02-19 18:20:39 +0300
committerKim Phillips <kim.phillips@freescale.com>2009-03-05 18:13:11 -0600
commit7e2ec1de1d2d723b59d7dd2fb85ff71b952d63af (patch)
tree362134aa7c56b1860c8bfc286517d8a71d919c55 /board/freescale/mpc837xemds
parent7e91558032a0c1932dd7f4f562f9c7cc55efc496 (diff)
downloadu-boot-imx-7e2ec1de1d2d723b59d7dd2fb85ff71b952d63af.zip
u-boot-imx-7e2ec1de1d2d723b59d7dd2fb85ff71b952d63af.tar.gz
u-boot-imx-7e2ec1de1d2d723b59d7dd2fb85ff71b952d63af.tar.bz2
mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal
The SerDes initialization should be finished before negating the reset signal according to the reference manual. This isn't an issue on real hardware, but we'd better stick to the specifications anyway. Suggested-by: Liu Dave <DaveLiu@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Diffstat (limited to 'board/freescale/mpc837xemds')
-rw-r--r--board/freescale/mpc837xemds/pci.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/board/freescale/mpc837xemds/pci.c b/board/freescale/mpc837xemds/pci.c
index 31116b3..29de2e7 100644
--- a/board/freescale/mpc837xemds/pci.c
+++ b/board/freescale/mpc837xemds/pci.c
@@ -115,6 +115,13 @@ skip_pci:
if (PARTID_NO_E(spridr) == SPR_8379)
return;
+ if (pex2)
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX_X2,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ else
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+
/* Configure the clock for PCIE controller */
clrsetbits_be32(&clk->sccr, SCCR_PCIEXP1CM | SCCR_PCIEXP2CM,
SCCR_PCIEXP1CM_1 | SCCR_PCIEXP2CM_1);
@@ -132,13 +139,6 @@ skip_pci:
out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR);
out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB);
- if (pex2)
- fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX_X2,
- FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
- else
- fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
- FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
-
mpc83xx_pcie_init(pex2 ? 1 : 2, pcie_reg, 0);
}