diff options
| author | Ben Warren <biggerbadderben@gmail.com> | 2008-01-16 22:37:42 -0500 |
|---|---|---|
| committer | Kim Phillips <kim.phillips@freescale.com> | 2008-01-17 11:02:33 -0600 |
| commit | 80ddd22626d321a772ebfba304eb7830cb4f6bac (patch) | |
| tree | 9132a55b467d6d7728a370d0b76e072ba5a57add /board/freescale/mpc8349emds/mpc8349emds.c | |
| parent | 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb (diff) | |
| download | u-boot-imx-80ddd22626d321a772ebfba304eb7830cb4f6bac.zip u-boot-imx-80ddd22626d321a772ebfba304eb7830cb4f6bac.tar.gz u-boot-imx-80ddd22626d321a772ebfba304eb7830cb4f6bac.tar.bz2 | |
Implement hard SPI driver on MPC8349EMDS
This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
This board has an ST M25P40 4Mbit EEPROM on its SPI bus
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Diffstat (limited to 'board/freescale/mpc8349emds/mpc8349emds.c')
| -rw-r--r-- | board/freescale/mpc8349emds/mpc8349emds.c | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index 3d72eb7..3fb2a45 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -27,6 +27,7 @@ #include <mpc83xx.h> #include <asm/mpc8349_pci.h> #include <i2c.h> +#include <spi.h> #include <spd.h> #include <miiphy.h> #if defined(CONFIG_SPD_EEPROM) @@ -251,6 +252,34 @@ void sdram_init(void) } #endif +/* + * The following are used to control the SPI chip selects for the SPI command. + */ +#ifdef CONFIG_HARD_SPI + +#define SPI_CS_MASK 0x80000000 + +void spi_eeprom_chipsel(int cs) +{ + volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0]; + + if(cs) + iopd->dat &= ~SPI_CS_MASK; + else + iopd->dat |= SPI_CS_MASK; +} + +/* + * The SPI command uses this table of functions for controlling the SPI + * chip selects. + */ +spi_chipsel_type spi_chipsel[] = { + spi_eeprom_chipsel, +}; +int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]); + +#endif /* CONFIG_HARD_SPI */ + #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { |