summaryrefslogtreecommitdiff
path: root/board/freescale/mpc8266ads
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2011-11-05 05:13:16 +0000
committerWolfgang Denk <wd@denx.de>2011-11-07 22:48:26 +0100
commit55e33279ce8edc25976bc00ecf94f545c33d4de9 (patch)
treeb8968fd17fbb72d0e725020a71a02569409596bc /board/freescale/mpc8266ads
parentf58902d0aa2147dce356239f069b2c063e8932e0 (diff)
downloadu-boot-imx-55e33279ce8edc25976bc00ecf94f545c33d4de9.zip
u-boot-imx-55e33279ce8edc25976bc00ecf94f545c33d4de9.tar.gz
u-boot-imx-55e33279ce8edc25976bc00ecf94f545c33d4de9.tar.bz2
board/freescale/mpc8266ads/mpc8266ads.c: CodingStyle cleanup
Make (mostly) checkpatch clean. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Rune Torgersen <runet@innovsys.com>
Diffstat (limited to 'board/freescale/mpc8266ads')
-rw-r--r--board/freescale/mpc8266ads/mpc8266ads.c594
1 files changed, 304 insertions, 290 deletions
diff --git a/board/freescale/mpc8266ads/mpc8266ads.c b/board/freescale/mpc8266ads/mpc8266ads.c
index 2caf4aa..c7fcfe5 100644
--- a/board/freescale/mpc8266ads/mpc8266ads.c
+++ b/board/freescale/mpc8266ads/mpc8266ads.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2011
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Modified during 2001 by
@@ -61,8 +61,8 @@
const iop_conf_t iop_conf_tab[4][32] = {
- /* Port A configuration */
- { /* conf ppar psor pdir podr pdat */
+ /* Port A configuration */
+ { /* conf ppar psor pdir podr pdat */
/* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
/* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
/* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
@@ -95,10 +95,10 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
/* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */
/* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
- },
+ },
- /* Port B configuration */
- { /* conf ppar psor pdir podr pdat */
+ /* Port B configuration */
+ { /* conf ppar psor pdir podr pdat */
/* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
/* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
/* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
@@ -131,10 +131,10 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- },
+ },
- /* Port C */
- { /* conf ppar psor pdir podr pdat */
+ /* Port C */
+ { /* conf ppar psor pdir podr pdat */
/* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
/* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
/* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
@@ -167,10 +167,10 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
/* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
/* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
- },
+ },
- /* Port D */
- { /* conf ppar psor pdir podr pdat */
+ /* Port D */
+ { /* conf ppar psor pdir podr pdat */
/* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
/* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
/* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
@@ -203,7 +203,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- }
+ }
};
typedef struct bscr_ {
@@ -224,317 +224,331 @@ typedef struct pci_ic_s {
void reset_phy(void)
{
- volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR;
+ volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR;
- /* reset the FEC port */
- bcsr->bcsr1 &= ~FETH_RST;
- bcsr->bcsr1 |= FETH_RST;
+ /* reset the FEC port */
+ bcsr->bcsr1 &= ~FETH_RST;
+ bcsr->bcsr1 |= FETH_RST;
}
-int board_early_init_f (void)
+int board_early_init_f(void)
{
- volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR;
- volatile pci_ic_t *pci_ic = (pci_ic_t *) CONFIG_SYS_PCI_INT;
+ volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR;
+ volatile pci_ic_t *pci_ic = (pci_ic_t *)CONFIG_SYS_PCI_INT;
- bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1 & ~RS232EN_2;
+ bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1 & ~RS232EN_2;
- /* mask all PCI interrupts */
- pci_ic->pci_int_mask |= 0xfff00000;
+ /* mask all PCI interrupts */
+ pci_ic->pci_int_mask |= 0xfff00000;
- return 0;
+ return 0;
}
int checkboard(void)
{
- puts ("Board: Motorola MPC8266ADS\n");
- return 0;
+ puts("Board: Motorola MPC8266ADS\n");
+ return 0;
}
phys_size_t initdram(int board_type)
{
/* Autoinit part stolen from board/sacsng/sacsng.c */
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
- volatile uchar c = 0xff;
- volatile uchar *ramaddr = (uchar *)(CONFIG_SYS_SDRAM_BASE + 0x8);
- uint psdmr = CONFIG_SYS_PSDMR;
- int i;
-
- uint psrt = 0x21; /* for no SPD */
- uint chipselects = 1; /* for no SPD */
- uint sdram_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; /* for no SPD */
- uint or = CONFIG_SYS_OR2_PRELIM; /* for no SPD */
- uint data_width;
- uint rows;
- uint banks;
- uint cols;
- uint caslatency;
- uint width;
- uint rowst;
- uint sdam;
- uint bsma;
- uint sda10;
- u_char spd_size;
- u_char data;
- u_char cksum;
- int j;
-
- /* Keep the compiler from complaining about potentially uninitialized vars */
- data_width = rows = banks = cols = caslatency = 0;
-
- /*
- * Read the SDRAM SPD EEPROM via I2C.
- */
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
- spd_size = data;
- cksum = data;
- for(j = 1; j < 64; j++)
- { /* read only the checksummed bytes */
- /* note: the I2C address autoincrements when alen == 0 */
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ volatile uchar c = 0xff;
+ volatile uchar *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8);
+ uint psdmr = CONFIG_SYS_PSDMR;
+ int i;
+
+ uint psrt = 0x21; /* for no SPD */
+ uint chipselects = 1; /* for no SPD */
+ uint sdram_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; /* for no SPD */
+ uint or = CONFIG_SYS_OR2_PRELIM; /* for no SPD */
+ uint data_width;
+ uint rows;
+ uint banks;
+ uint cols;
+ uint caslatency;
+ uint width;
+ uint rowst;
+ uint sdam;
+ uint bsma;
+ uint sda10;
+ u_char spd_size;
+ u_char data;
+ u_char cksum;
+ int j;
+
+ /*
+ * Keep the compiler from complaining about
+ * potentially uninitialized vars
+ */
+ data_width = rows = banks = cols = caslatency = 0;
+
+ /*
+ * Read the SDRAM SPD EEPROM via I2C.
+ */
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
+ spd_size = data;
+ cksum = data;
+ for (j = 1; j < 64; j++) { /* read only the checksummed bytes */
+ /* note: the I2C address autoincrements when alen == 0 */
i2c_read(SDRAM_SPD_ADDR, 0, 0, &data, 1);
- /*printf("addr %d = 0x%02x\n", j, data);*/
- if(j == 5) chipselects = data & 0x0F;
- else if(j == 6) data_width = data;
- else if(j == 7) data_width |= data << 8;
- else if(j == 3) rows = data & 0x0F;
- else if(j == 4) cols = data & 0x0F;
- else if(j == 12)
- {
+ /*printf("addr %d = 0x%02x\n", j, data); */
+ if (j == 5)
+ chipselects = data & 0x0F;
+ else if (j == 6)
+ data_width = data;
+ else if (j == 7)
+ data_width |= data << 8;
+ else if (j == 3)
+ rows = data & 0x0F;
+ else if (j == 4)
+ cols = data & 0x0F;
+ else if (j == 12) {
/*
- * Refresh rate: this assumes the prescaler is set to
- * approximately 0.39uSec per tick and the target refresh period
- * is about 85% of maximum.
+ * Refresh rate: this assumes the prescaler is set to
+ * approximately 0.39uSec per tick and the target
+ * refresh period is about 85% of maximum.
*/
- switch(data & 0x7F)
- {
- default:
- case 0: psrt = 0x21; /* 15.625uS */ break;
- case 1: psrt = 0x07; /* 3.9uS */ break;
- case 2: psrt = 0x0F; /* 7.8uS */ break;
- case 3: psrt = 0x43; /* 31.3uS */ break;
- case 4: psrt = 0x87; /* 62.5uS */ break;
- case 5: psrt = 0xFF; /* 125uS */ break;
+ switch (data & 0x7F) {
+ default:
+ case 0:
+ psrt = 0x21; /* 15.625uS */
+ break;
+ case 1:
+ psrt = 0x07; /* 3.9uS */
+ break;
+ case 2:
+ psrt = 0x0F; /* 7.8uS */
+ break;
+ case 3:
+ psrt = 0x43; /* 31.3uS */
+ break;
+ case 4:
+ psrt = 0x87; /* 62.5uS */
+ break;
+ case 5:
+ psrt = 0xFF; /* 125uS */
+ break;
}
- }
- else if(j == 17) banks = data;
- else if(j == 18)
- {
- caslatency = 3; /* default CL */
-# if(PESSIMISTIC_SDRAM)
- if((data & 0x04) != 0) caslatency = 3;
- else if((data & 0x02) != 0) caslatency = 2;
- else if((data & 0x01) != 0) caslatency = 1;
-# else
- if((data & 0x01) != 0) caslatency = 1;
- else if((data & 0x02) != 0) caslatency = 2;
- else if((data & 0x04) != 0) caslatency = 3;
-# endif
- else
- {
- printf ("WARNING: Unknown CAS latency 0x%02X, using 3\n",
+ } else if (j == 17)
+ banks = data;
+ else if (j == 18) {
+ caslatency = 3; /* default CL */
+#if (PESSIMISTIC_SDRAM)
+ if ((data & 0x04) != 0)
+ caslatency = 3;
+ else if ((data & 0x02) != 0)
+ caslatency = 2;
+ else if ((data & 0x01) != 0)
+ caslatency = 1;
+#else
+ if ((data & 0x01) != 0)
+ caslatency = 1;
+ else if ((data & 0x02) != 0)
+ caslatency = 2;
+ else if ((data & 0x04) != 0)
+ caslatency = 3;
+#endif
+ else {
+ printf("WARNING: Unknown CAS latency 0x%02X, using 3\n",
data);
}
- }
- else if(j == 63)
- {
- if(data != cksum)
- {
- printf ("WARNING: Configuration data checksum failure:"
+ } else if (j == 63) {
+ if (data != cksum) {
+ printf("WARNING: Configuration data checksum failure:"
" is 0x%02x, calculated 0x%02x\n",
- data, cksum);
+ data, cksum);
}
}
cksum += data;
- }
+ }
- /* We don't trust CL less than 2 (only saw it on an old 16MByte DIMM) */
- if(caslatency < 2) {
+ /* We don't trust CL less than 2 (only saw it on an old 16MByte DIMM) */
+ if (caslatency < 2) {
printf("CL was %d, forcing to 2\n", caslatency);
caslatency = 2;
- }
- if(rows > 14) {
- printf("This doesn't look good, rows = %d, should be <= 14\n", rows);
+ }
+ if (rows > 14) {
+ printf("This doesn't look good, rows = %d, should be <= 14\n",
+ rows);
rows = 14;
- }
- if(cols > 11) {
- printf("This doesn't look good, columns = %d, should be <= 11\n", cols);
+ }
+ if (cols > 11) {
+ printf("This doesn't look good, columns = %d, should be <= 11\n",
+ cols);
cols = 11;
- }
+ }
- if((data_width != 64) && (data_width != 72))
- {
+ if ((data_width != 64) && (data_width != 72)) {
printf("WARNING: SDRAM width unsupported, is %d, expected 64 or 72.\n",
data_width);
- }
- width = 3; /* 2^3 = 8 bytes = 64 bits wide */
- /*
- * Convert banks into log2(banks)
- */
- if (banks == 2) banks = 1;
- else if(banks == 4) banks = 2;
- else if(banks == 8) banks = 3;
-
-
- sdram_size = 1 << (rows + cols + banks + width);
- /* hack for high density memory (512MB per CS) */
- /* !!!!! Will ONLY work with Page Based Interleave !!!!!
- ( PSDMR[PBI] = 1 )
- */
- /* mamory actually has 11 column addresses, but the memory controller
- doesn't really care.
- the calculations that follow will however move the rows so that
- they are muxed one bit off if you use 11 bit columns.
- The solution is to tell the memory controller the correct size of the memory
- but change the number of columns to 10 afterwards.
- The 11th column addre will still be mucxed correctly onto the bus.
-
- Also be aware that the MPC8266ADS board Rev B has not connected
- Row address 13 to anything.
-
- The fix is to connect ADD16 (from U37-47) to SADDR12 (U28-126)
- */
- if (cols > 10)
- cols = 10;
-
-#if(CONFIG_PBI == 0) /* bank-based interleaving */
- rowst = ((32 - 6) - (rows + cols + width)) * 2;
+ }
+ width = 3; /* 2^3 = 8 bytes = 64 bits wide */
+ /*
+ * Convert banks into log2(banks)
+ */
+ if (banks == 2)
+ banks = 1;
+ else if (banks == 4)
+ banks = 2;
+ else if (banks == 8)
+ banks = 3;
+
+
+ sdram_size = 1 << (rows + cols + banks + width);
+ /* hack for high density memory (512MB per CS) */
+ /* !!!!! Will ONLY work with Page Based Interleave !!!!!
+ ( PSDMR[PBI] = 1 )
+ */
+ /*
+ * memory actually has 11 column addresses, but the memory
+ * controller doesn't really care.
+ *
+ * the calculations that follow will however move the rows so
+ * that they are muxed one bit off if you use 11 bit columns.
+ *
+ * The solution is to tell the memory controller the correct
+ * size of the memory but change the number of columns to 10
+ * afterwards.
+ *
+ * The 11th column addre will still be mucxed correctly onto
+ * the bus.
+ *
+ * Also be aware that the MPC8266ADS board Rev B has not
+ * connected Row address 13 to anything.
+ *
+ * The fix is to connect ADD16 (from U37-47) to SADDR12 (U28-126)
+ */
+ if (cols > 10)
+ cols = 10;
+
+#if (CONFIG_PBI == 0) /* bank-based interleaving */
+ rowst = ((32 - 6) - (rows + cols + width)) * 2;
#else
- rowst = 32 - (rows + banks + cols + width);
+ rowst = 32 - (rows + banks + cols + width);
#endif
- or = ~(sdram_size - 1) | /* SDAM address mask */
- ((banks-1) << 13) | /* banks per device */
- (rowst << 9) | /* rowst */
- ((rows - 9) << 6); /* numr */
-
-
- /*printf("memctl->memc_or2 = 0x%08x\n", or);*/
-
- /*
- * SDAM specifies the number of columns that are multiplexed
- * (reference AN2165/D), defined to be (columns - 6) for page
- * interleave, (columns - 8) for bank interleave.
- *
- * BSMA is 14 - max(rows, cols). The bank select lines come
- * into play above the highest "address" line going into the
- * the SDRAM.
- */
-#if(CONFIG_PBI == 0) /* bank-based interleaving */
- sdam = cols - 8;
- bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
- sda10 = sdam + 2;
+ or = ~(sdram_size - 1) | /* SDAM address mask */
+ ((banks - 1) << 13) | /* banks per device */
+ (rowst << 9) | /* rowst */
+ ((rows - 9) << 6); /* numr */
+
+
+ /*printf("memctl->memc_or2 = 0x%08x\n", or); */
+
+ /*
+ * SDAM specifies the number of columns that are multiplexed
+ * (reference AN2165/D), defined to be (columns - 6) for page
+ * interleave, (columns - 8) for bank interleave.
+ *
+ * BSMA is 14 - max(rows, cols). The bank select lines come
+ * into play above the highest "address" line going into the
+ * the SDRAM.
+ */
+#if (CONFIG_PBI == 0) /* bank-based interleaving */
+ sdam = cols - 8;
+ bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
+ sda10 = sdam + 2;
#else
- sdam = cols + banks - 8;
- bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
- sda10 = sdam;
+ sdam = cols + banks - 8;
+ bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
+ sda10 = sdam;
#endif
-#if(PESSIMISTIC_SDRAM)
- psdmr = (CONFIG_PBI |\
- PSDMR_RFEN |\
- PSDMR_RFRC_16_CLK |\
- PSDMR_PRETOACT_8W |\
- PSDMR_ACTTORW_8W |\
- PSDMR_WRC_4C |\
- PSDMR_EAMUX |\
- PSDMR_BUFCMD) |\
- caslatency |\
- ((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */ \
- (sdam << 24) |\
- (bsma << 21) |\
- (sda10 << 18);
+#if (PESSIMISTIC_SDRAM)
+ psdmr = (CONFIG_PBI | PSDMR_RFEN | PSDMR_RFRC_16_CLK |
+ PSDMR_PRETOACT_8W | PSDMR_ACTTORW_8W | PSDMR_WRC_4C |
+ PSDMR_EAMUX | PSDMR_BUFCMD) | caslatency |
+ ((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */
+ (sdam << 24) | (bsma << 21) | (sda10 << 18);
#else
- psdmr = (CONFIG_PBI |\
- PSDMR_RFEN |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_3W | /* 1 for 7E parts (fast PC-133) */ \
- PSDMR_ACTTORW_2W | /* 1 for 7E parts (fast PC-133) */ \
- PSDMR_WRC_1C | /* 1 clock + 7nSec */
- EAMUX |\
- BUFCMD) |\
- caslatency |\
- ((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */ \
- (sdam << 24) |\
- (bsma << 21) |\
- (sda10 << 18);
+ psdmr = (CONFIG_PBI | PSDMR_RFEN | PSDMR_RFRC_7_CLK |
+ PSDMR_PRETOACT_3W | /* 1 for 7E parts (fast PC-133) */
+ PSDMR_ACTTORW_2W | /* 1 for 7E parts (fast PC-133) */
+ PSDMR_WRC_1C | /* 1 clock + 7nSec */
+ EAMUX | BUFCMD) | caslatency |
+ ((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */
+ (sdam << 24) | (bsma << 21) | (sda10 << 18);
#endif
- /*printf("psdmr = 0x%08x\n", psdmr);*/
-
- /*
- * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
- *
- * "At system reset, initialization software must set up the
- * programmable parameters in the memory controller banks registers
- * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
- * system software should execute the following initialization sequence
- * for each SDRAM device.
- *
- * 1. Issue a PRECHARGE-ALL-BANKS command
- * 2. Issue eight CBR REFRESH commands
- * 3. Issue a MODE-SET command to initialize the mode register
- *
- * Quote from Micron MT48LC8M16A2 data sheet:
- *
- * "...the SDRAM requires a 100uS delay prior to issuing any
- * command other than a COMMAND INHIBIT or NOP. Starting at some
- * point during this 100uS period and continuing at least through
- * the end of this period, COMMAND INHIBIT or NOP commands should
- * be applied."
- *
- * "Once the 100uS delay has been satisfied with at least one COMMAND
- * INHIBIT or NOP command having been applied, a /PRECHARGE command/
- * should be applied. All banks must then be precharged, thereby
- * placing the device in the all banks idle state."
- *
- * "Once in the idle state, /two/ AUTO REFRESH cycles must be
- * performed. After the AUTO REFRESH cycles are complete, the
- * SDRAM is ready for mode register programming."
- *
- * (/emphasis/ mine, gvb)
- *
- * The way I interpret this, Micron start up sequence is:
- * 1. Issue a PRECHARGE-BANK command (initial precharge)
- * 2. Issue a PRECHARGE-ALL-BANKS command ("all banks ... precharged")
- * 3. Issue two (presumably, doing eight is OK) CBR REFRESH commands
- * 4. Issue a MODE-SET command to initialize the mode register
- *
- * --------
- *
- * The initial commands are executed by setting P/LSDMR[OP] and
- * accessing the SDRAM with a single-byte transaction."
- *
- * The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
- */
-
- memctl->memc_mptpr = CONFIG_SYS_MPTPR;
- memctl->memc_psrt = psrt;
-
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
- memctl->memc_or2 = or;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
- for (i = 0; i < 8; i++)
+ /*printf("psdmr = 0x%08x\n", psdmr); */
+
+ /*
+ * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+ *
+ * "At system reset, initialization software must set up the
+ * programmable parameters in the memory controller banks registers
+ * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+ * system software should execute the following initialization sequence
+ * for each SDRAM device.
+ *
+ * 1. Issue a PRECHARGE-ALL-BANKS command
+ * 2. Issue eight CBR REFRESH commands
+ * 3. Issue a MODE-SET command to initialize the mode register
+ *
+ * Quote from Micron MT48LC8M16A2 data sheet:
+ *
+ * "...the SDRAM requires a 100uS delay prior to issuing any
+ * command other than a COMMAND INHIBIT or NOP. Starting at some
+ * point during this 100uS period and continuing at least through
+ * the end of this period, COMMAND INHIBIT or NOP commands should
+ * be applied."
+ *
+ * "Once the 100uS delay has been satisfied with at least one COMMAND
+ * INHIBIT or NOP command having been applied, a /PRECHARGE command/
+ * should be applied. All banks must then be precharged, thereby
+ * placing the device in the all banks idle state."
+ *
+ * "Once in the idle state, /two/ AUTO REFRESH cycles must be
+ * performed. After the AUTO REFRESH cycles are complete, the
+ * SDRAM is ready for mode register programming."
+ *
+ * (/emphasis/ mine, gvb)
+ *
+ * The way I interpret this, Micron start up sequence is:
+ * 1. Issue a PRECHARGE-BANK command (initial precharge)
+ * 2. Issue a PRECHARGE-ALL-BANKS command ("all banks ... precharged")
+ * 3. Issue two (presumably, doing eight is OK) CBR REFRESH commands
+ * 4. Issue a MODE-SET command to initialize the mode register
+ *
+ * --------
+ *
+ * The initial commands are executed by setting P/LSDMR[OP] and
+ * accessing the SDRAM with a single-byte transaction."
+ *
+ * The appropriate BRx/ORx registers have already been set
+ * when we get here. The SDRAM can be accessed at the address
+ * CONFIG_SYS_SDRAM_BASE.
+ */
+
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
+ memctl->memc_psrt = psrt;
+
+ memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
+ memctl->memc_or2 = or;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
*ramaddr = c;
- memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
- *ramaddr = c;
+ memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++)
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+ *ramaddr = c;
- memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
- *ramaddr = c;
+ memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *ramaddr = c;
- /*
- * Do it a second time for the second set of chips if the DIMM has
- * two chip selects (double sided).
- */
- if(chipselects > 1)
- {
- ramaddr += sdram_size;
+ /*
+ * Do it a second time for the second set of chips if the DIMM has
+ * two chip selects (double sided).
+ */
+ if (chipselects > 1) {
+ ramaddr += sdram_size;
memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM + sdram_size;
memctl->memc_or3 = or;
@@ -551,28 +565,28 @@ phys_size_t initdram(int board_type)
memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*ramaddr = c;
- }
+ }
/* print info */
printf("SDRAM configuration read from SPD\n");
printf("\tSize per side = %dMB\n", sdram_size >> 20);
- printf("\tOrganization: %d sides, %d banks, %d Columns, %d Rows, Data width = %d bits\n", chipselects, 1<<(banks), cols, rows, data_width);
+ printf("\tOrganization: %d sides, %d banks, %d Columns, %d Rows, Data width = %d bits\n",
+ chipselects, 1 << (banks), cols, rows, data_width);
printf("\tRefresh rate = %d, CAS latency = %d", psrt, caslatency);
-#if(CONFIG_PBI == 0) /* bank-based interleaving */
- printf(", Using Bank Based Interleave\n");
+#if (CONFIG_PBI == 0) /* bank-based interleaving */
+ printf(", Using Bank Based Interleave\n");
#else
- printf(", Using Page Based Interleave\n");
+ printf(", Using Page Based Interleave\n");
#endif
printf("\tTotal size: ");
- /* this delay only needed for original 16MB DIMM...
- * Not needed for any other memory configuration */
- if ((sdram_size * chipselects) == (16 *1024 *1024))
- udelay (250000);
- return (sdram_size * chipselects);
- /*return (16 * 1024 * 1024);*/
-}
+ /* this delay only needed for original 16MB DIMM...
+ * Not needed for any other memory configuration */
+ if ((sdram_size * chipselects) == (16 * 1024 * 1024))
+ udelay(250000);
+ return sdram_size * chipselects;
+}
#ifdef CONFIG_PCI
struct pci_controller hose;