Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Conflicts:
	boards.cfg

1 files changed, 0 insertions, 476 deletions

diff --git a/board/freescale/mpc8260ads/flash.c b/board/freescale/mpc8260ads/flash.c
deleted file mode 100644
index 4012d45..0000000
--- a/board/freescale/mpc8260ads/flash.c
+++ /dev/null
@@ -1,476 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
- * Add support the Sharp chips on the mpc8260ads.
- * I started with board/ip860/flash.c and made changes I found in
- * the MTD project by David Schleef.
- *
- * (C) Copyright 2003 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- * Re-written to support multi-bank flash SIMMs.
- * Added support for real protection and JFFS2.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-/* Intel-compatible flash ID */
-#define INTEL_COMPAT  0x89898989
-#define INTEL_ALT     0xB0B0B0B0
-
-/* Intel-compatible flash commands */
-#define INTEL_PROGRAM 0x10101010
-#define INTEL_ERASE   0x20202020
-#define INTEL_CLEAR   0x50505050
-#define INTEL_LOCKBIT 0x60606060
-#define INTEL_PROTECT 0x01010101
-#define INTEL_STATUS  0x70707070
-#define INTEL_READID  0x90909090
-#define INTEL_CONFIRM 0xD0D0D0D0
-#define INTEL_RESET   0xFFFFFFFF
-
-/* Intel-compatible flash status bits */
-#define INTEL_FINISHED 0x80808080
-#define INTEL_OK       0x80808080
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * This board supports 32-bit wide flash SIMMs (4x8-bit configuration.)
- * Up to 32MB of flash supported (up to 4 banks.)
- * BCSR is used for flash presence detect (page 4-65 of the User's Manual)
- *
- * The following code can not run from flash!
- */
-unsigned long flash_init (void)
-{
-	ulong size = 0, sect_start, sect_size = 0, bank_size;
-	ushort sect_count = 0;
-	int i, j, nbanks;
-	vu_long *addr = (vu_long *)CONFIG_SYS_FLASH_BASE;
-	vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
-
-	switch (bcsr[2] & 0xF) {
-	case 0:
-		nbanks = 4;
-		break;
-	case 1:
-		nbanks = 2;
-		break;
-	case 2:
-		nbanks = 1;
-		break;
-	default:		/* Unsupported configurations */
-		nbanks = CONFIG_SYS_MAX_FLASH_BANKS;
-	}
-
-	if (nbanks > CONFIG_SYS_MAX_FLASH_BANKS)
-		nbanks = CONFIG_SYS_MAX_FLASH_BANKS;
-
-	for (i = 0; i < nbanks; i++) {
-		*addr = INTEL_READID;	/* Read Intelligent Identifier */
-		if ((addr[0] == INTEL_COMPAT) || (addr[0] == INTEL_ALT)) {
-			switch (addr[1]) {
-			case SHARP_ID_28F016SCL:
-			case SHARP_ID_28F016SCZ:
-				flash_info[i].flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
-				sect_count = 32;
-				sect_size = 0x40000;
-				break;
-			default:
-				flash_info[i].flash_id = FLASH_UNKNOWN;
-				sect_count = CONFIG_SYS_MAX_FLASH_SECT;
-				sect_size =
-				   CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS / CONFIG_SYS_MAX_FLASH_SECT;
-			}
-		}
-		else
-			flash_info[i].flash_id = FLASH_UNKNOWN;
-		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-			printf("### Unknown flash ID %08lX %08lX at address %08lX ###\n",
-			       addr[0], addr[1], (ulong)addr);
-			size = 0;
-			*addr = INTEL_RESET; /* Reset bank to Read Array mode */
-			break;
-		}
-		flash_info[i].sector_count = sect_count;
-		flash_info[i].size = bank_size = sect_size * sect_count;
-		size += bank_size;
-		sect_start = (ulong)addr;
-		for (j = 0; j < sect_count; j++) {
-			addr = (vu_long *)sect_start;
-			flash_info[i].start[j]   = sect_start;
-			flash_info[i].protect[j] = (addr[2] == 0x01010101);
-			sect_start += sect_size;
-		}
-		*addr = INTEL_RESET; /* Reset bank to Read Array mode */
-		addr = (vu_long *)sect_start;
-	}
-
-	if (size == 0) {	/* Unknown flash, fill with hard-coded values */
-		sect_start = CONFIG_SYS_FLASH_BASE;
-		for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-			flash_info[i].flash_id = FLASH_UNKNOWN;
-			flash_info[i].size = CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS;
-			flash_info[i].sector_count = sect_count;
-			for (j = 0; j < sect_count; j++) {
-				flash_info[i].start[j]   = sect_start;
-				flash_info[i].protect[j] = 0;
-				sect_start += sect_size;
-			}
-		}
-		size = CONFIG_SYS_FLASH_SIZE;
-	}
-	else
-		for (i = nbanks; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-			flash_info[i].flash_id = FLASH_UNKNOWN;
-			flash_info[i].size = 0;
-			flash_info[i].sector_count = 0;
-		}
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
-		      &flash_info[0]);
-#endif
-	return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:	printf ("Intel ");		break;
-	case FLASH_MAN_SHARP:   printf ("Sharp ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F016SV:	printf ("28F016SV (16 Mbit, 32 x 64k)\n");
-				break;
-	case FLASH_28F160S3:	printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
-				break;
-	case FLASH_28F320S3:	printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
-				break;
-	case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if (    ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
-	     && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			vu_long *addr = (vu_long *)(info->start[sect]);
-
-			last = start = get_timer (0);
-
-			/* Disable interrupts which might cause a timeout here */
-			flag = disable_interrupts();
-
-			/* Clear Status Register */
-			*addr = INTEL_CLEAR;
-			/* Single Block Erase Command */
-			*addr = INTEL_ERASE;
-			/* Confirm */
-			*addr = INTEL_CONFIRM;
-
-			if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
-			    /* Resume Command, as per errata update */
-			    *addr = INTEL_CONFIRM;
-			}
-
-			/* re-enable interrupts if necessary */
-			if (flag)
-				enable_interrupts();
-
-			while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = INTEL_RESET;	/* reset bank */
-					return 1;
-				}
-				/* show that we're waiting */
-				if ((now - last) > 1000) {	/* every second */
-					putc ('.');
-					last = now;
-				}
-			}
-
-			if (*addr != INTEL_OK) {
-				printf("Block erase failed at %08X, CSR=%08X\n",
-				       (uint)addr, (uint)*addr);
-				*addr = INTEL_RESET;	/* reset bank */
-				return 1;
-			}
-
-			/* reset to read mode */
-			*addr = INTEL_RESET;
-		}
-	}
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	ulong start;
-	int rc = 0;
-	int flag;
-	vu_long *addr = (vu_long *)dest;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		return (2);
-	}
-
-	*addr = INTEL_CLEAR; /* Clear status register */
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Write Command */
-	*addr = INTEL_PROGRAM;
-
-	/* Write Data */
-	*addr = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			printf("Write timed out\n");
-			rc = 1;
-			break;
-		}
-	}
-	if (*addr != INTEL_OK) {
-		printf ("Write failed at %08X, CSR=%08X\n", (uint)addr, (uint)*addr);
-		rc = 1;
-	}
-
-	*addr = INTEL_RESET; /* Reset to read array mode */
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	*(vu_long *)wp = INTEL_RESET; /* Reset to read array mode */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	rc = write_word(info, wp, data);
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Set/Clear sector's lock bit, returns:
- * 0 - OK
- * 1 - Error (timeout, voltage problems, etc.)
- */
-int flash_real_protect(flash_info_t *info, long sector, int prot)
-{
-	ulong start;
-	int i;
-	int rc = 0;
-	vu_long *addr = (vu_long *)(info->start[sector]);
-	int flag = disable_interrupts();
-
-	*addr = INTEL_CLEAR;	/* Clear status register */
-	if (prot) {			/* Set sector lock bit */
-		*addr = INTEL_LOCKBIT;	/* Sector lock bit */
-		*addr = INTEL_PROTECT;	/* set */
-	}
-	else {				/* Clear sector lock bit */
-		*addr = INTEL_LOCKBIT;	/* All sectors lock bits */
-		*addr = INTEL_CONFIRM;	/* clear */
-	}
-
-	start = get_timer(0);
-	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
-			printf("Flash lock bit operation timed out\n");
-			rc = 1;
-			break;
-		}
-	}
-
-	if (*addr != INTEL_OK) {
-		printf("Flash lock bit operation failed at %08X, CSR=%08X\n",
-		       (uint)addr, (uint)*addr);
-		rc = 1;
-	}
-
-	if (!rc)
-		info->protect[sector] = prot;
-
-	/*
-	 * Clear lock bit command clears all sectors lock bits, so
-	 * we have to restore lock bits of protected sectors.
-	 */
-	if (!prot)
-		for (i = 0; i < info->sector_count; i++)
-			if (info->protect[i]) {
-				addr = (vu_long *)(info->start[i]);
-				*addr = INTEL_LOCKBIT;	/* Sector lock bit */
-				*addr = INTEL_PROTECT;	/* set */
-				udelay(CONFIG_SYS_FLASH_LOCK_TOUT * 1000);
-			}
-
-	if (flag)
-		enable_interrupts();
-
-	*addr = INTEL_RESET;		/* Reset to read array mode */
-
-	return rc;
-}