Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

5 files changed, 23 insertions, 490 deletions

diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m54455evb/Makefile
+++ b/board/freescale/m54455evb/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c
index 100682a..293b5b0 100644
--- a/board/freescale/m54455evb/m54455evb.c
+++ b/board/freescale/m54455evb/m54455evb.c
@@ -45,13 +45,13 @@ phys_size_t initdram(int board_type)
 	 * Serial Boot: The dram is already initialized in start.S
 	 * only require to return DRAM size
 	 */
-	dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
 #else
 	volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
 	volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
 	u32 i;
 
-	dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1;
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
 
 	for (i = 0x13; i < 0x20; i++) {
 		if (dramsize == (1 << i))
@@ -59,33 +59,33 @@ phys_size_t initdram(int board_type)
 	}
 	i--;
 
-	gpio->mscr_sdram = CFG_SDRAM_DRV_STRENGTH;
+	gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH;
 
-	sdram->sdcs0 = (CFG_SDRAM_BASE | i);
-	sdram->sdcs1 = (CFG_SDRAM_BASE1 | i);
+	sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i);
+	sdram->sdcs1 = (CONFIG_SYS_SDRAM_BASE1 | i);
 
-	sdram->sdcfg1 = CFG_SDRAM_CFG1;
-	sdram->sdcfg2 = CFG_SDRAM_CFG2;
+	sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2;
 
 	/* Issue PALL */
-	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Issue LEMR */
-	sdram->sdmr = CFG_SDRAM_EMOD | 0x408;
-	sdram->sdmr = CFG_SDRAM_MODE | 0x300;
+	sdram->sdmr = CONFIG_SYS_SDRAM_EMOD | 0x408;
+	sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x300;
 
 	udelay(500);
 
 	/* Issue PALL */
-	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
 
 	/* Perform two refresh cycles */
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
-	sdram->sdcr = CFG_SDRAM_CTRL | 4;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
 
-	sdram->sdmr = CFG_SDRAM_MODE | 0x200;
+	sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x200;
 
-	sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+	sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
 
 	udelay(100);
 #endif
@@ -175,11 +175,11 @@ void pci_init_board(void)
 #include <flash.h>
 ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
 {
-	int sect[] = CFG_ATMEL_SECT;
-	int sectsz[] = CFG_ATMEL_SECTSZ;
+	int sect[] = CONFIG_SYS_ATMEL_SECT;
+	int sectsz[] = CONFIG_SYS_ATMEL_SECTSZ;
 	int i, j, k;
 
-	if (base != CFG_ATMEL_BASE)
+	if (base != CONFIG_SYS_ATMEL_BASE)
 		return 0;
 
 	info->flash_id          = 0x01000000;
@@ -205,9 +205,9 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
 	info->name              = "CFI conformant";
 
 	info->size              = 0;
-	info->sector_count      = CFG_ATMEL_TOTALSECT;
+	info->sector_count      = CONFIG_SYS_ATMEL_TOTALSECT;
 	info->start[0] = base;
-	for (k = 0, i = 0; i < CFG_ATMEL_REGION; i++) {
+	for (k = 0, i = 0; i < CONFIG_SYS_ATMEL_REGION; i++) {
 		info->size += sect[i] * sectsz[i];
 
 		for (j = 0; j < sect[i]; j++, k++) {
@@ -218,4 +218,4 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
 
 	return 1;
 }
-#endif				/* CFG_FLASH_CFI */
+#endif				/* CONFIG_SYS_FLASH_CFI */
diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c
deleted file mode 100644
index 0be5439..0000000
--- a/board/freescale/m54455evb/mii.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
-
-	if (setclear) {
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO;
-		else
-			gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA;
-	} else {
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CFG_FEC0_IOBASE)
-			gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
-		else
-			gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	struct eth_device *dev;
-	int i, miispd;
-	u16 rst = 0;
-
-	dev = eth_get_dev();
-
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET);
-	for (i = 0; i < FEC_RESET_DELAY; ++i) {
-		udelay(500);
-		miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst);
-		if ((rst & PHY_BMCR_RESET) == 0)
-			break;
-	}
-	if (i == FEC_RESET_DELAY)
-		printf("Mii reset timeout %d\n", i);
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || (CONFIG_MII) */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					strcpy(info->phy_name,
-					       STR_ID_DP83848VV);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					printf(STR_ID_DP83848VV);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m54455evb/u-boot.atm b/board/freescale/m54455evb/u-boot.atm
index 22c6048..08e184c 100644
--- a/board/freescale/m54455evb/u-boot.atm
+++ b/board/freescale/m54455evb/u-boot.atm
@@ -62,7 +62,7 @@ SECTIONS
     lib_generic/zlib.o		(.text)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)
 
     *(.text)
     *(.fixup)
diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m54455evb/u-boot.lds
deleted file mode 100644
index 1aa53c2..0000000
--- a/board/freescale/m54455evb/u-boot.lds
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(m68k)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mcf5445x/start.o		(.text)
-    lib_m68k/traps.o		(.text)
-    lib_m68k/interrupts.o	(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-
-  .reloc   :
-  {
-    __got_start = .;
-    *(.got)
-    __got_end = .;
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   _sbss = .;
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-   . = ALIGN(4);
-   _ebss = .;
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}