ColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301x

Signed-off-by: Alison Wang <b18965@freescale.com>

2 files changed, 22 insertions, 20 deletions

diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c
index b4df22f..1c14b83 100644
--- a/board/freescale/m5329evb/m5329evb.c
+++ b/board/freescale/m5329evb/m5329evb.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2000-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -27,6 +27,7 @@
 #include <config.h>
 #include <common.h>
 #include <asm/immap.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -39,7 +40,7 @@ int checkboard(void)
 
 phys_size_t initdram(int board_type)
 {
-	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+	sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
 	u32 dramsize, i;
 
 	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
@@ -50,29 +51,30 @@ phys_size_t initdram(int board_type)
 	}
 	i--;
 
-	sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
-	sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
-	sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
+	out_be32(&sdram->cs0, CONFIG_SYS_SDRAM_BASE | i);
+	out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1);
+	out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2);
 
 	/* Issue PALL */
-	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2;
+	out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
 
 	/* Issue LEMR */
-	sdram->mode = CONFIG_SYS_SDRAM_EMOD;
-	sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000);
+	out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD);
+	out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000);
 
 	udelay(500);
 
 	/* Issue PALL */
-	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+	out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
 
 	/* Perform two refresh cycles */
-	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
-	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
+	out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
 
-	sdram->mode = CONFIG_SYS_SDRAM_MODE;
+	out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE);
 
-	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+	out_be32(&sdram->ctrl,
+		(CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00);
 
 	udelay(100);
 
diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c
index 16025f9..c70c98c 100644
--- a/board/freescale/m5329evb/nand.c
+++ b/board/freescale/m5329evb/nand.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2000-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -67,18 +67,18 @@ static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
 
 int board_nand_init(struct nand_chip *nand)
 {
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	/*
 	 * set up pin configuration - enabled 2nd output buffer's signals
 	 * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc)
 	 * to use nCE signal
 	 */
-	gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
-	gpio->pddr_timer |= 0x08;
-	gpio->ppd_timer |= 0x08;
-	gpio->pclrr_timer = 0;
-	gpio->podr_timer = 0;
+	clrbits_8(&gpio->par_timer, GPIO_PAR_TIN3_TIN3);
+	setbits_8(&gpio->pddr_timer, 0x08);
+	setbits_8(&gpio->ppd_timer, 0x08);
+	out_8(&gpio->pclrr_timer, 0);
+	out_8(&gpio->podr_timer, 0);
 
 	nand->chip_delay = 60;
 	nand->ecc.mode = NAND_ECC_SOFT;