summaryrefslogtreecommitdiff
path: root/board/freescale/ls1021aqds
diff options
context:
space:
mode:
authorAlison Wang <b18965@freescale.com>2014-12-09 17:38:23 +0800
committerYork Sun <yorksun@freescale.com>2015-01-23 22:29:14 -0600
commit0f5e5579f2b75053e5f05bcba890f7ab2409b460 (patch)
tree6ffa4fe667580e96a89ccee7279ee0bc541e1495 /board/freescale/ls1021aqds
parentdda3b610eee9dcd433627202584ded417327dd51 (diff)
downloadu-boot-imx-0f5e5579f2b75053e5f05bcba890f7ab2409b460.zip
u-boot-imx-0f5e5579f2b75053e5f05bcba890f7ab2409b460.tar.gz
u-boot-imx-0f5e5579f2b75053e5f05bcba890f7ab2409b460.tar.bz2
ls102xa: etsec: Select ge0_clk125 for eTSEC clock muxing as default
This patch reverts to use ge0_clk125 for eTSEC clock muxing. For SAI and CAN which are pin multiplexed with RGMII1 in EC1 of RCW, ge2_clk125 will be used via hwconfig. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'board/freescale/ls1021aqds')
-rw-r--r--board/freescale/ls1021aqds/ls1021aqds.c35
1 files changed, 34 insertions, 1 deletions
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 152da2d..0a3252e 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -48,6 +48,12 @@ enum {
MUX_TYPE_SD_PC_SG_SG,
};
+enum {
+ GE0_CLK125,
+ GE2_CLK125,
+ GE1_CLK125,
+};
+
int checkboard(void)
{
#ifndef CONFIG_QSPI_BOOT
@@ -177,7 +183,6 @@ int board_early_init_f(void)
#ifdef CONFIG_TSEC_ENET
out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR);
- out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125);
#endif
#ifdef CONFIG_FSL_IFC
@@ -241,6 +246,32 @@ void board_init_f(ulong dummy)
}
#endif
+void config_etseccm_source(int etsec_gtx_125_mux)
+{
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+ switch (etsec_gtx_125_mux) {
+ case GE0_CLK125:
+ out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE0_CLK125);
+ debug("etseccm set to GE0_CLK125\n");
+ break;
+
+ case GE2_CLK125:
+ out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125);
+ debug("etseccm set to GE2_CLK125\n");
+ break;
+
+ case GE1_CLK125:
+ out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE1_CLK125);
+ debug("etseccm set to GE1_CLK125\n");
+ break;
+
+ default:
+ printf("Error! trying to set etseccm to invalid value\n");
+ break;
+ }
+}
+
int config_board_mux(int ctrl_type)
{
u8 reg12, reg14;
@@ -250,6 +281,7 @@ int config_board_mux(int ctrl_type)
switch (ctrl_type) {
case MUX_TYPE_CAN:
+ config_etseccm_source(GE2_CLK125);
reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_CAN);
break;
case MUX_TYPE_IIC2:
@@ -259,6 +291,7 @@ int config_board_mux(int ctrl_type)
reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_RGMII);
break;
case MUX_TYPE_SAI:
+ config_etseccm_source(GE2_CLK125);
reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_SAI);
break;
case MUX_TYPE_SDHC: