Merge branch 'master' of git://git.denx.de/u-boot-arm

Conflicts:
	cpu/arm1176/cpu.c
	cpu/arm1176/start.S
	cpu/arm_cortexa8/s5pc1xx/Makefile
	cpu/arm_cortexa8/s5pc1xx/clock.c
	drivers/serial/serial_s5p.c
	include/asm-arm/arch-s5pc1xx/clk.h
	include/asm-arm/arch-s5pc1xx/gpio.h
	include/asm-arm/arch-s5pc1xx/uart.h

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

5 files changed, 320 insertions, 159 deletions

diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 02a824d..620eb16 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -33,6 +33,7 @@ COBJS-${CONFIG_FSL_CADMUS}	+= cadmus.o
 COBJS-${CONFIG_FSL_VIA}		+= cds_via.o
 COBJS-${CONFIG_FSL_DIU_FB}	+= fsl_diu_fb.o fsl_logo_bmp.o
 COBJS-${CONFIG_FSL_PIXIS}	+= pixis.o
+COBJS-${CONFIG_FSL_NGPIXIS}	+= ngpixis.o
 COBJS-${CONFIG_PQ_MDS_PIB}	+= pq-mds-pib.o
 COBJS-${CONFIG_ID_EEPROM}	+= sys_eeprom.o
 COBJS-${CONFIG_FSL_SGMII_RISER}	+= sgmii_riser.o
diff --git a/board/freescale/common/ngpixis.c b/board/freescale/common/ngpixis.c
new file mode 100644
index 0000000..bb6794e
--- /dev/null
+++ b/board/freescale/common/ngpixis.c
@@ -0,0 +1,136 @@
+/**
+ * Copyright 2010 Freescale Semiconductor
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This file provides support for the ngPIXIS, a board-specific FPGA used on
+ * some Freescale reference boards.
+ *
+ * A "switch" is black rectangular block on the motherboard.  It contains
+ * eight "bits".  The ngPIXIS has a set of memory-mapped registers (SWx) that
+ * shadow the actual physical switches.  There is also another set of
+ * registers (ENx) that tell the ngPIXIS which bits of SWx should actually be
+ * used to override the values of the bits in the physical switches.
+ *
+ * The following macros need to be defined:
+ *
+ * PIXIS_BASE - The virtual address of the base of the PIXIS register map
+ *
+ * PIXIS_LBMAP_SWITCH - The switch number (i.e. the "x" in "SWx"). This value
+ *    is used in the PIXIS_SW() macro to determine which offset in
+ *    the PIXIS register map corresponds to the physical switch that controls
+ *    the boot bank.
+ *
+ * PIXIS_LBMAP_MASK - A bit mask the defines which bits in SWx to use.
+ *
+ * PIXIS_LBMAP_SHIFT - The shift value that corresponds to PIXIS_LBMAP_MASK.
+ *
+ * PIXIS_LBMAP_ALTBANK - The value to program into SWx to tell the ngPIXIS to
+ *    boot from the alternate bank.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <watchdog.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+
+#include "ngpixis.h"
+
+/*
+ * Reset the board. This ignores the ENx registers.
+ */
+void pixis_reset(void)
+{
+	out_8(&pixis->rst, 0);
+
+	while (1);
+}
+
+/*
+ * Reset the board.  Like pixis_reset(), but it honors the ENx registers.
+ */
+void pixis_bank_reset(void)
+{
+	out_8(&pixis->vctl, 0);
+	out_8(&pixis->vctl, 1);
+
+	while (1);
+}
+
+/**
+ * Set the boot bank to the power-on default bank
+ */
+void clear_altbank(void)
+{
+	/* Tell the ngPIXIS to use this the bits in the physical switch for the
+	 * boot bank value, instead of the SWx register.  We need to be careful
+	 * only to set the bits in SWx that correspond to the boot bank.
+	 */
+	clrbits_8(&PIXIS_EN(PIXIS_LBMAP_SWITCH), PIXIS_LBMAP_MASK);
+}
+
+/**
+ * Set the boot bank to the alternate bank
+ */
+void set_altbank(void)
+{
+	/* Program the alternate bank number into the SWx register.
+	 */
+	clrsetbits_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH), PIXIS_LBMAP_MASK,
+		     PIXIS_LBMAP_ALTBANK);
+
+	/* Tell the ngPIXIS to use this the bits in the SWx register for the
+	 * boot bank value, instead of the physical switch.  We need to be
+	 * careful only to set the bits in SWx that correspond to the boot bank.
+	 */
+	setbits_8(&PIXIS_EN(PIXIS_LBMAP_SWITCH), PIXIS_LBMAP_MASK);
+}
+
+
+int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	unsigned int i;
+	char *p_altbank = NULL;
+	char *unknown_param = NULL;
+
+	/* No args is a simple reset request.
+	 */
+	if (argc <= 1)
+		pixis_reset();
+
+	for (i = 1; i < argc; i++) {
+		if (strcmp(argv[i], "altbank") == 0) {
+			p_altbank = argv[i];
+			continue;
+		}
+
+		unknown_param = argv[i];
+	}
+
+	if (unknown_param) {
+		printf("Invalid option: %s\n", unknown_param);
+		return 1;
+	}
+
+	if (p_altbank)
+		set_altbank();
+	else
+		clear_altbank();
+
+	pixis_bank_reset();
+
+	/* Shouldn't be reached. */
+	return 0;
+}
+
+U_BOOT_CMD(
+	pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
+	"Reset the board using the FPGA sequencer",
+	"- hard reset to default bank\n"
+	"pixis_reset altbank - reset to alternate bank\n"
+	);
diff --git a/board/freescale/common/ngpixis.h b/board/freescale/common/ngpixis.h
new file mode 100644
index 0000000..284d044
--- /dev/null
+++ b/board/freescale/common/ngpixis.h
@@ -0,0 +1,57 @@
+/**
+ * Copyright 2010 Freescale Semiconductor
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This file provides support for the ngPIXIS, a board-specific FPGA used on
+ * some Freescale reference boards.
+ */
+
+/* ngPIXIS register set. Hopefully, this won't change too much over time.
+ * Feel free to add board-specific #ifdefs where necessary.
+ */
+typedef struct ngpixis {
+	u8 id;
+	u8 arch;
+	u8 scver;
+	u8 csr;
+	u8 rst;
+	u8 res1;
+	u8 aux;
+	u8 spd;
+	u8 brdcfg0;
+	u8 dma;
+	u8 addr;
+	u8 res2[2];
+	u8 data;
+	u8 led;
+	u8 res3;
+	u8 vctl;
+	u8 vstat;
+	u8 vcfgen0;
+	u8 res4;
+	u8 ocmcsr;
+	u8 ocmmsg;
+	u8 gmdbg;
+	u8 res5[2];
+	u8 sclk[3];
+	u8 dclk[3];
+	u8 watch;
+	struct {
+		u8 sw;
+		u8 en;
+	} s[8];
+} ngpixis_t  __attribute__ ((aligned(1)));
+
+/* Pointer to the PIXIS register set */
+#define pixis ((ngpixis_t *)PIXIS_BASE)
+
+/* The PIXIS SW register that corresponds to board switch X, where x >= 1 */
+#define PIXIS_SW(x)		(pixis->s[(x) - 1].sw)
+
+/* The PIXIS EN register that corresponds to board switch X, where x >= 1 */
+#define PIXIS_EN(x)		(pixis->s[(x) - 1].en)
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
index 7210512..119eaf9 100644
--- a/board/freescale/common/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2006 Freescale Semiconductor
+ * Copyright 2006,2010 Freescale Semiconductor
  * Jeff Brown
  * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
  *
@@ -24,33 +24,26 @@
 
 #include <common.h>
 #include <command.h>
-#include <watchdog.h>
-#include <asm/cache.h>
 #include <asm/io.h>
 
-#include "pixis.h"
-
-
-static ulong strfractoint(uchar *strptr);
-
+#define pixis_base (u8 *)PIXIS_BASE
 
 /*
  * Simple board reset.
  */
 void pixis_reset(void)
 {
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
 	out_8(pixis_base + PIXIS_RST, 0);
-}
 
+	while (1);
+}
 
 /*
  * Per table 27, page 58 of MPC8641HPCN spec.
  */
-int set_px_sysclk(ulong sysclk)
+static int set_px_sysclk(unsigned long sysclk)
 {
 	u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
 
 	switch (sysclk) {
 	case 33:
@@ -117,13 +110,13 @@ int set_px_sysclk(ulong sysclk)
 	return 1;
 }
 
-
-int set_px_mpxpll(ulong mpxpll)
+/* Set the CFG_SYSPLL bits
+ *
+ * This only has effect if PX_VCFGEN0[SYSPLL]=1, which is true if
+ * read_from_px_regs() is called.
+ */
+static int set_px_mpxpll(unsigned long mpxpll)
 {
-	u8 tmp;
-	u8 val;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-
 	switch (mpxpll) {
 	case 2:
 	case 4:
@@ -133,28 +126,19 @@ int set_px_mpxpll(ulong mpxpll)
 	case 12:
 	case 14:
 	case 16:
-		val = (u8) mpxpll;
-		break;
-	default:
-		printf("Unsupported MPXPLL ratio.\n");
-		return 0;
+		clrsetbits_8(pixis_base + PIXIS_VSPEED1, 0x1F, mpxpll);
+		return 1;
 	}
 
-	tmp = in_8(pixis_base + PIXIS_VSPEED1);
-	tmp = (tmp & 0xF0) | (val & 0x0F);
-	out_8(pixis_base + PIXIS_VSPEED1, tmp);
-
-	return 1;
+	printf("Unsupported MPXPLL ratio.\n");
+	return 0;
 }
 
-
-int set_px_corepll(ulong corepll)
+static int set_px_corepll(unsigned long corepll)
 {
-	u8 tmp;
 	u8 val;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
 
-	switch ((int)corepll) {
+	switch (corepll) {
 	case 20:
 		val = 0x08;
 		break;
@@ -178,113 +162,132 @@ int set_px_corepll(ulong corepll)
 		return 0;
 	}
 
-	tmp = in_8(pixis_base + PIXIS_VSPEED0);
-	tmp = (tmp & 0xE0) | (val & 0x1F);
-	out_8(pixis_base + PIXIS_VSPEED0, tmp);
-
+	clrsetbits_8(pixis_base + PIXIS_VSPEED0, 0x1F, val);
 	return 1;
 }
 
+#ifndef CONFIG_SYS_PIXIS_VCFGEN0_ENABLE
+#define CONFIG_SYS_PIXIS_VCFGEN0_ENABLE		0x1C
+#endif
 
-void read_from_px_regs(int set)
+/* Tell the PIXIS where to find the COREPLL, MPXPLL, SYSCLK values
+ *
+ * The PIXIS can be programmed to look at either the on-board dip switches
+ * or various other PIXIS registers to determine the values for COREPLL,
+ * MPXPLL, and SYSCLK.
+ *
+ * CONFIG_SYS_PIXIS_VCFGEN0_ENABLE is the value to write to the PIXIS_VCFGEN0
+ * register that tells the pixis to use the various PIXIS register.
+ */
+static void read_from_px_regs(int set)
 {
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-	u8 mask = 0x1C;	/* COREPLL, MPXPLL, SYSCLK controlled by PIXIS */
 	u8 tmp = in_8(pixis_base + PIXIS_VCFGEN0);
 
 	if (set)
-		tmp = tmp | mask;
+		tmp = tmp | CONFIG_SYS_PIXIS_VCFGEN0_ENABLE;
 	else
-		tmp = tmp & ~mask;
+		tmp = tmp & ~CONFIG_SYS_PIXIS_VCFGEN0_ENABLE;
+
 	out_8(pixis_base + PIXIS_VCFGEN0, tmp);
 }
 
+/* CONFIG_SYS_PIXIS_VBOOT_ENABLE is the value to write to the PX_VCFGEN1
+ * register that tells the pixis to use the PX_VBOOT[LBMAP] register.
+ */
+#ifndef CONFIG_SYS_PIXIS_VBOOT_ENABLE
+#define CONFIG_SYS_PIXIS_VBOOT_ENABLE	0x04
+#endif
 
-void read_from_px_regs_altbank(int set)
+/* Configure the source of the boot location
+ *
+ * The PIXIS can be programmed to look at either the on-board dip switches
+ * or the PX_VBOOT[LBMAP] register to determine where we should boot.
+ *
+ * If we want to boot from the alternate boot bank, we need to tell the PIXIS
+ * to ignore the on-board dip switches and use the PX_VBOOT[LBMAP] instead.
+ */
+static void read_from_px_regs_altbank(int set)
 {
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-	u8 mask = 0x04;	/* FLASHBANK and FLASHMAP controlled by PIXIS */
 	u8 tmp = in_8(pixis_base + PIXIS_VCFGEN1);
 
 	if (set)
-		tmp = tmp | mask;
+		tmp = tmp | CONFIG_SYS_PIXIS_VBOOT_ENABLE;
 	else
-		tmp = tmp & ~mask;
+		tmp = tmp & ~CONFIG_SYS_PIXIS_VBOOT_ENABLE;
+
 	out_8(pixis_base + PIXIS_VCFGEN1, tmp);
 }
 
+/* CONFIG_SYS_PIXIS_VBOOT_MASK contains the bits to set in VBOOT register that
+ * tells the PIXIS what the alternate flash bank is.
+ *
+ * Note that it's not really a mask.  It contains the actual LBMAP bits that
+ * must be set to select the alternate bank.  This code assumes that the
+ * primary bank has these bits set to 0, and the alternate bank has these
+ * bits set to 1.
+ */
 #ifndef CONFIG_SYS_PIXIS_VBOOT_MASK
 #define CONFIG_SYS_PIXIS_VBOOT_MASK	(0x40)
 #endif
 
-void clear_altbank(void)
+/* Tell the PIXIS to boot from the default flash bank
+ *
+ * Program the default flash bank into the VBOOT register.  This register is
+ * used only if PX_VCFGEN1[FLASH]=1.
+ */
+static void clear_altbank(void)
 {
-	u8 tmp;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-
-	tmp = in_8(pixis_base + PIXIS_VBOOT);
-	tmp &= ~CONFIG_SYS_PIXIS_VBOOT_MASK;
-
-	out_8(pixis_base + PIXIS_VBOOT, tmp);
+	clrbits_8(pixis_base + PIXIS_VBOOT, CONFIG_SYS_PIXIS_VBOOT_MASK);
 }
 
-
-void set_altbank(void)
+/* Tell the PIXIS to boot from the alternate flash bank
+ *
+ * Program the alternate flash bank into the VBOOT register.  This register is
+ * used only if PX_VCFGEN1[FLASH]=1.
+ */
+static void set_altbank(void)
 {
-	u8 tmp;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-
-	tmp = in_8(pixis_base + PIXIS_VBOOT);
-	tmp |= CONFIG_SYS_PIXIS_VBOOT_MASK;
-
-	out_8(pixis_base + PIXIS_VBOOT, tmp);
+	setbits_8(pixis_base + PIXIS_VBOOT, CONFIG_SYS_PIXIS_VBOOT_MASK);
 }
 
-
-void set_px_go(void)
+/* Reset the board with watchdog disabled.
+ *
+ * This respects the altbank setting.
+ */
+static void set_px_go(void)
 {
-	u8 tmp;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
+	/* Disable the VELA sequencer and watchdog */
+	clrbits_8(pixis_base + PIXIS_VCTL, 9);
 
-	tmp = in_8(pixis_base + PIXIS_VCTL);
-	tmp = tmp & 0x1E;			/* clear GO bit */
-	out_8(pixis_base + PIXIS_VCTL, tmp);
+	/* Reboot by starting the VELA sequencer */
+	setbits_8(pixis_base + PIXIS_VCTL, 0x1);
 
-	tmp = in_8(pixis_base + PIXIS_VCTL);
-	tmp = tmp | 0x01;	/* set GO bit - start reset sequencer */
-	out_8(pixis_base + PIXIS_VCTL, tmp);
+	while (1);
 }
 
-
-void set_px_go_with_watchdog(void)
+/* Reset the board with watchdog enabled.
+ *
+ * This respects the altbank setting.
+ */
+static void set_px_go_with_watchdog(void)
 {
-	u8 tmp;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
+	/* Disable the VELA sequencer */
+	clrbits_8(pixis_base + PIXIS_VCTL, 1);
 
-	tmp = in_8(pixis_base + PIXIS_VCTL);
-	tmp = tmp & 0x1E;
-	out_8(pixis_base + PIXIS_VCTL, tmp);
+	/* Enable the watchdog and reboot by starting the VELA sequencer */
+	setbits_8(pixis_base + PIXIS_VCTL, 0x9);
 
-	tmp = in_8(pixis_base + PIXIS_VCTL);
-	tmp = tmp | 0x09;
-	out_8(pixis_base + PIXIS_VCTL, tmp);
+	while (1);
 }
 
-
-int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp,
-			       int flag, int argc, char *argv[])
+/* Disable the watchdog
+ *
+ */
+static int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
+				      char *argv[])
 {
-	u8 tmp;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-
-	tmp = in_8(pixis_base + PIXIS_VCTL);
-	tmp = tmp & 0x1E;
-	out_8(pixis_base + PIXIS_VCTL, tmp);
-
-	/* setting VCTL[WDEN] to 0 to disable watch dog */
-	tmp = in_8(pixis_base + PIXIS_VCTL);
-	tmp &= ~0x08;
-	out_8(pixis_base + PIXIS_VCTL, tmp);
+	/* Disable the VELA sequencer and the watchdog */
+	clrbits_8(pixis_base + PIXIS_VCTL, 9);
 
 	return 0;
 }
@@ -296,16 +299,17 @@ U_BOOT_CMD(
 );
 
 #ifdef CONFIG_PIXIS_SGMII_CMD
-int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+
+/* Enable or disable SGMII mode for a TSEC
+ */
+static int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	int which_tsec = -1;
-	u8 *pixis_base = (u8 *)PIXIS_BASE;
-	uchar mask;
-	uchar switch_mask;
+	unsigned char mask;
+	unsigned char switch_mask;
 
-	if (argc > 2)
-		if (strcmp(argv[1], "all") != 0)
-			which_tsec = simple_strtoul(argv[1], NULL, 0);
+	if ((argc > 2) && (strcmp(argv[1], "all") != 0))
+		which_tsec = simple_strtoul(argv[1], NULL, 0);
 
 	switch (which_tsec) {
 #ifdef CONFIG_TSEC1
@@ -363,6 +367,7 @@ U_BOOT_CMD(
 	"    off - disables SGMII\n"
 	"    switch - use switch settings"
 );
+
 #endif
 
 /*
@@ -371,14 +376,13 @@ U_BOOT_CMD(
  * FPGA register values.
  * input: strptr i.e. argv[2]
  */
-
-static ulong strfractoint(uchar *strptr)
+static unsigned long strfractoint(char *strptr)
 {
-	int i, j, retval;
+	int i, j;
 	int mulconst;
-	int intarr_len = 0, decarr_len = 0, no_dec = 0;
-	ulong intval = 0, decval = 0;
-	uchar intarr[3], decarr[3];
+	int intarr_len, no_dec = 0;
+	unsigned long intval = 0, decval = 0;
+	char intarr[3], decarr[3];
 
 	/* Assign the integer part to intarr[]
 	 * If there is no decimal point i.e.
@@ -412,26 +416,21 @@ static ulong strfractoint(uchar *strptr)
 			j++;
 		}
 
-		decarr_len = j;
 		decarr[j] = '\0';
 
 		mulconst = 1;
-		for (i = 0; i < decarr_len; i++)
+		for (i = 0; i < j; i++)
 			mulconst *= 10;
-		decval = simple_strtoul((char *)decarr, NULL, 10);
+		decval = simple_strtoul(decarr, NULL, 10);
 	}
 
-	intval = simple_strtoul((char *)intarr, NULL, 10);
+	intval = simple_strtoul(intarr, NULL, 10);
 	intval = intval * mulconst;
 
-	retval = intval + decval;
-
-	return retval;
+	return intval + decval;
 }
 
-
-int
-pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	unsigned int i;
 	char *p_cf = NULL;
@@ -440,7 +439,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	char *p_cf_mpxpll = NULL;
 	char *p_altbank = NULL;
 	char *p_wd = NULL;
-	unsigned int unknown_param = 0;
+	int unknown_param = 0;
 
 	/*
 	 * No args is a simple reset request.
@@ -493,9 +492,9 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	 */
 	read_from_px_regs(0);
 
-	if (p_altbank) {
+	if (p_altbank)
 		read_from_px_regs_altbank(0);
-	}
+
 	clear_altbank();
 
 	/*
@@ -507,7 +506,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		unsigned long mpxpll;
 
 		sysclk = simple_strtoul(p_cf_sysclk, NULL, 10);
-		corepll = strfractoint((uchar *) p_cf_corepll);
+		corepll = strfractoint(p_cf_corepll);
 		mpxpll = simple_strtoul(p_cf_mpxpll, NULL, 10);
 
 		if (!(set_px_sysclk(sysclk)
@@ -536,11 +535,10 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	/*
 	 * Reset with watchdog specified.
 	 */
-	if (p_wd) {
+	if (p_wd)
 		set_px_go_with_watchdog();
-	} else {
+	else
 		set_px_go();
-	}
 
 	/*
 	 * Shouldn't be reached.
diff --git a/board/freescale/common/pixis.h b/board/freescale/common/pixis.h
deleted file mode 100644
index ff62a62..0000000
--- a/board/freescale/common/pixis.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright 2006 Freescale Semiconductor
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-extern void pixis_reset(void);
-extern int set_px_sysclk(ulong sysclk);
-extern int set_px_mpxpll(ulong mpxpll);
-extern int set_px_corepll(ulong corepll);
-extern void read_from_px_regs(int set);
-extern void read_from_px_regs_altbank(int set);
-extern void set_altbank(void);
-extern void set_px_go(void);
-extern void set_px_go_with_watchdog(void);