summaryrefslogtreecommitdiff
path: root/board/freescale/bsc9132qds/bsc9132qds.c
diff options
context:
space:
mode:
authorPrabhakar Kushwaha <prabhakar@freescale.com>2013-01-14 18:26:57 +0000
committerAndy Fleming <afleming@freescale.com>2013-01-30 11:25:14 -0600
commit41d910118cfd30c802e037bab70754fbe5f04c7e (patch)
tree4cd2ddf1142628a42434776cc2778a18dd6f4c62 /board/freescale/bsc9132qds/bsc9132qds.c
parent35fe948e3b62789182610f57d48f97dbd5403aa8 (diff)
downloadu-boot-imx-41d910118cfd30c802e037bab70754fbe5f04c7e.zip
u-boot-imx-41d910118cfd30c802e037bab70754fbe5f04c7e.tar.gz
u-boot-imx-41d910118cfd30c802e037bab70754fbe5f04c7e.tar.bz2
powerpc/85xx: Add BSC9132QDS support
BSC9132QDS is a Freescale reference design board for BSC9132 SoC. BSC9132 SOC is an integrated device that targets the evolving Microcell, Picocell, and Enterprise-Femto base station market subsegments. It combines Power Architecture e500v2 and DSP StarCore SC3850 core technologies with MAPLE-B2F baseband acceleration processing elements. BSC9132QDS Overview -------------------- 2Gbyte DDR3 (on board DDR), Dual Ranki 32Mbyte 16bit NOR flash 128Mbyte 2K page size NAND Flash 256 Kbit M24256 I2C EEPROM 128 Mbit SPI Flash memory SD slot USB-ULPI eTSEC1: Connected to SGMII PHY eTSEC2: Connected to SGMII PHY PCIe CPRI SerDes I2C RTC DUART interface: supports one UARTs up to 115200 bps for console display Apart from the above it also consists various peripherals to support DSP functionalities. This patch adds support for mainly Power side functionalities and peripherals Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
Diffstat (limited to 'board/freescale/bsc9132qds/bsc9132qds.c')
-rw-r--r--board/freescale/bsc9132qds/bsc9132qds.c403
1 files changed, 403 insertions, 0 deletions
diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c
new file mode 100644
index 0000000..bcac5c1
--- /dev/null
+++ b/board/freescale/bsc9132qds/bsc9132qds.c
@@ -0,0 +1,403 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/io.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+#include <mmc.h>
+#include <netdev.h>
+#include <asm/fsl_ifc.h>
+#include <hwconfig.h>
+#include <i2c.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#ifdef CONFIG_PCI
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#endif
+
+#include "../common/qixis.h"
+DECLARE_GLOBAL_DATA_PTR;
+
+
+int board_early_init_f(void)
+{
+ struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
+
+ setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
+
+ return 0;
+}
+
+void board_config_serdes_mux(void)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 pordevsr = in_be32(&gur->pordevsr);
+ u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+ MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+
+ switch (srds_cfg) {
+ /* PEX(1) PEX(2) CPRI 2 CPRI 1 */
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ case 22:
+ case 23:
+ case 24:
+ case 25:
+ case 26:
+ QIXIS_WRITE_I2C(brdcfg[4], 0x03);
+ break;
+
+ /* PEX(1) PEX(2) SGMII1 CPRI 1 */
+ case 6:
+ case 7:
+ case 8:
+ case 9:
+ case 10:
+ case 27:
+ case 28:
+ case 29:
+ case 30:
+ case 31:
+ QIXIS_WRITE_I2C(brdcfg[4], 0x01);
+ break;
+
+ /* PEX(1) PEX(2) SGMII1 SGMII2 */
+ case 11:
+ case 32:
+ QIXIS_WRITE_I2C(brdcfg[4], 0x00);
+ break;
+
+ /* PEX(1) SGMII2 CPRI 2 CPRI 1 */
+ case 12:
+ case 13:
+ case 14:
+ case 15:
+ case 16:
+ case 33:
+ case 34:
+ case 35:
+ case 36:
+ case 37:
+ QIXIS_WRITE_I2C(brdcfg[4], 0x07);
+ break;
+
+ /* PEX(1) SGMII2 SGMII1 CPRI 1 */
+ case 17:
+ case 18:
+ case 19:
+ case 20:
+ case 21:
+ case 38:
+ case 39:
+ case 40:
+ case 41:
+ case 42:
+ QIXIS_WRITE_I2C(brdcfg[4], 0x05);
+ break;
+
+ /* SGMII1 SGMII2 CPRI 2 CPRI 1 */
+ case 43:
+ case 44:
+ case 45:
+ case 46:
+ case 47:
+ QIXIS_WRITE_I2C(brdcfg[4], 0x0F);
+ break;
+
+
+ default:
+ break;
+ }
+}
+
+int board_early_init_r(void)
+{
+#ifndef CONFIG_SYS_NO_FLASH
+ const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+ const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+ /*
+ * Remap Boot flash region to caching-inhibited
+ * so that flash can be erased properly.
+ */
+
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
+
+ /* invalidate existing TLB entry for flash */
+ disable_tlb(flash_esel);
+
+ set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, flash_esel, BOOKE_PAGESZ_64M, 1);
+
+ set_tlb(1, flashbase + 0x4000000,
+ CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, flash_esel+1, BOOKE_PAGESZ_64M, 1);
+#endif
+ board_config_serdes_mux();
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+ fsl_pcie_init_board(0);
+}
+#endif /* ifdef CONFIG_PCI */
+
+int checkboard(void)
+{
+ struct cpu_type *cpu;
+ u8 sw;
+
+ cpu = gd->cpu;
+ printf("Board: %sQDS\n", cpu->name);
+
+ printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x,\n",
+ QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
+
+ sw = QIXIS_READ(brdcfg[0]);
+ sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+ printf("IFC chip select:");
+ switch (sw) {
+ case 0:
+ printf("NOR\n");
+ break;
+ case 2:
+ printf("Promjet\n");
+ break;
+ case 4:
+ printf("NAND\n");
+ break;
+ default:
+ printf("Invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+ break;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+ struct fsl_pq_mdio_info mdio_info;
+ struct tsec_info_struct tsec_info[4];
+ int num = 0;
+
+#ifdef CONFIG_TSEC1
+ SET_STD_TSEC_INFO(tsec_info[num], 1);
+ num++;
+
+#endif
+
+#ifdef CONFIG_TSEC2
+ SET_STD_TSEC_INFO(tsec_info[num], 2);
+ num++;
+#endif
+
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+
+ fsl_pq_mdio_init(bis, &mdio_info);
+ tsec_eth_init(bis, tsec_info, num);
+
+ #ifdef CONFIG_PCI
+ pci_eth_init(bis);
+ #endif
+
+ return 0;
+}
+#endif
+
+#define USBMUX_SEL_MASK 0xc0
+#define USBMUX_SEL_UART2 0xc0
+#define USBMUX_SEL_USB 0x40
+#define SPIMUX_SEL_UART3 0x80
+#define GPS_MUX_SEL_GPS 0x40
+
+#define TSEC_1588_CLKIN_MASK 0x03
+#define CON_XCVR_REF_CLK 0x00
+
+int misc_init_r(void)
+{
+ u8 val;
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 porbmsr = in_be32(&gur->porbmsr);
+ u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf;
+
+ /*Configure 1588 clock-in source from RF Card*/
+ val = QIXIS_READ_I2C(brdcfg[5]);
+ QIXIS_WRITE_I2C(brdcfg[5],
+ (val & ~(TSEC_1588_CLKIN_MASK)) | CON_XCVR_REF_CLK);
+
+ if (hwconfig("uart2") && hwconfig("usb1")) {
+ printf("UART2 and USB cannot work together on the board\n");
+ printf("Remove one from hwconfig and reset\n");
+ } else {
+ if (hwconfig("uart2")) {
+ val = QIXIS_READ_I2C(brdcfg[5]);
+ QIXIS_WRITE_I2C(brdcfg[5],
+ (val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_UART2);
+ clrbits_be32(&gur->pmuxcr3,
+ MPC85xx_PMUXCR3_USB_SEL_MASK);
+ setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART2_SEL);
+ } else {
+ /* By default USB should be selected.
+ * Programming FPGA to select USB. */
+ val = QIXIS_READ_I2C(brdcfg[5]);
+ QIXIS_WRITE_I2C(brdcfg[5],
+ (val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_USB);
+ }
+
+ }
+
+ if (hwconfig("sim")) {
+ if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+ romloc == PORBMSR_ROMLOC_NOR ||
+ romloc == PORBMSR_ROMLOC_SPI) {
+
+ val = QIXIS_READ_I2C(brdcfg[3]);
+ QIXIS_WRITE_I2C(brdcfg[3], val|0x10);
+ clrbits_be32(&gur->pmuxcr,
+ MPC85xx_PMUXCR0_SIM_SEL_MASK);
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR0_SIM_SEL);
+ }
+ }
+
+ if (hwconfig("uart3")) {
+ if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+ romloc == PORBMSR_ROMLOC_NOR ||
+ romloc == PORBMSR_ROMLOC_SDHC) {
+
+ /* UART3 and SPI1 (Flashes) are muxed together */
+ val = QIXIS_READ_I2C(brdcfg[3]);
+ QIXIS_WRITE_I2C(brdcfg[3], (val | SPIMUX_SEL_UART3));
+ clrbits_be32(&gur->pmuxcr3,
+ MPC85xx_PMUXCR3_UART3_SEL_MASK);
+ setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART3_SEL);
+
+ /* MUX to select UART3 connection to J24 header
+ * or to GPS */
+ val = QIXIS_READ_I2C(brdcfg[6]);
+ if (hwconfig("gps"))
+ QIXIS_WRITE_I2C(brdcfg[6],
+ (val | GPS_MUX_SEL_GPS));
+ else
+ QIXIS_WRITE_I2C(brdcfg[6],
+ (val & ~(GPS_MUX_SEL_GPS)));
+ }
+ }
+ return 0;
+}
+
+void fdt_del_node_compat(void *blob, const char *compatible)
+{
+ int err;
+ int off = fdt_node_offset_by_compatible(blob, -1, compatible);
+ if (off < 0) {
+ printf("WARNING: could not find compatible node %s: %s.\n",
+ compatible, fdt_strerror(off));
+ return;
+ }
+ err = fdt_del_node(blob, off);
+ if (err < 0) {
+ printf("WARNING: could not remove %s: %s.\n",
+ compatible, fdt_strerror(err));
+ }
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ phys_addr_t base;
+ phys_size_t size;
+
+ ft_cpu_setup(blob, bd);
+
+ base = getenv_bootm_low();
+ size = getenv_bootm_size();
+
+ #if defined(CONFIG_PCI)
+ FT_FSL_PCI_SETUP;
+ #endif
+
+ fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 porbmsr = in_be32(&gur->porbmsr);
+ u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf;
+
+ if (!(hwconfig("uart2") && hwconfig("usb1"))) {
+ /* If uart2 is there in hwconfig remove usb node from
+ * device tree */
+
+ if (hwconfig("uart2")) {
+ /* remove dts usb node */
+ fdt_del_node_compat(blob, "fsl-usb2-dr");
+ } else {
+ fdt_fixup_dr_usb(blob, bd);
+ fdt_del_node_and_alias(blob, "serial2");
+ }
+ }
+
+ if (hwconfig("uart3")) {
+ if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+ romloc == PORBMSR_ROMLOC_NOR ||
+ romloc == PORBMSR_ROMLOC_SDHC)
+ /* Delete SPI node from the device tree */
+ fdt_del_node_and_alias(blob, "spi1");
+ } else
+ fdt_del_node_and_alias(blob, "serial3");
+
+ if (hwconfig("sim")) {
+ if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+ romloc == PORBMSR_ROMLOC_NOR ||
+ romloc == PORBMSR_ROMLOC_SPI) {
+
+ /* remove dts sdhc node */
+ fdt_del_node_compat(blob, "fsl,esdhc");
+ } else if (romloc == PORBMSR_ROMLOC_SDHC) {
+
+ /* remove dts sim node */
+ fdt_del_node_compat(blob, "fsl,sim-v1.0");
+ printf("SIM & SDHC can't work together on the board");
+ printf("\nRemove sim from hwconfig and reset\n");
+ }
+ }
+}
+#endif