diff options
| author | Suresh Gupta <suresh.gupta@freescale.com> | 2013-03-25 07:40:13 +0000 |
|---|---|---|
| committer | Andy Fleming <afleming@freescale.com> | 2013-05-24 16:54:12 -0500 |
| commit | 16d88f415ab799287672ae6cd08bf3ce975de2b5 (patch) | |
| tree | 3d85efdf337bc48461c6610bf362f990e79b44da /board/freescale/b4860qds | |
| parent | 49e946cb6ae0448492147ffcb9dcd7d0af1eab4d (diff) | |
| download | u-boot-imx-16d88f415ab799287672ae6cd08bf3ce975de2b5.zip u-boot-imx-16d88f415ab799287672ae6cd08bf3ce975de2b5.tar.gz u-boot-imx-16d88f415ab799287672ae6cd08bf3ce975de2b5.tar.bz2 | |
Enable XAUI interface for B4860QDS
- Added SERDES2 PRTCLs = 0x98, 0x9E
- Default Phy Addresses for Teranetics PHY on XAUI card
The PHY addresses of Teranetics PHY on XAUI riser card are assigned
based on the slot it is in. Switches SW4[2:4] and SW6[2:4] on
AMC2PEX-2S On B4860QDS, AMC2PEX card decide the PHY addresses on slot1
and slot2
- Configure MDIO for 10Gig Mac
Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Diffstat (limited to 'board/freescale/b4860qds')
| -rw-r--r-- | board/freescale/b4860qds/eth_b4860qds.c | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c index 68e2725..3bcda6d 100644 --- a/board/freescale/b4860qds/eth_b4860qds.c +++ b/board/freescale/b4860qds/eth_b4860qds.c @@ -275,6 +275,24 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR); break; + case 0x98: + /* XAUI in Slot1 and Slot2 */ + debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC1: %x\n", + CONFIG_SYS_FM1_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC1, + CONFIG_SYS_FM1_10GEC1_PHY_ADDR); + debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n", + CONFIG_SYS_FM1_10GEC2_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC2, + CONFIG_SYS_FM1_10GEC2_PHY_ADDR); + break; + case 0x9E: + /* XAUI in Slot2 */ + debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n", + CONFIG_SYS_FM1_10GEC2_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC2, + CONFIG_SYS_FM1_10GEC2_PHY_ADDR); + break; default: printf("Fman: Unsupported SerDes2 Protocol 0x%02x\n", serdes2_prtcl); @@ -300,6 +318,23 @@ int board_eth_init(bd_t *bis) } } + for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { + int idx = i - FM1_10GEC1; + + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + fm_info_set_mdio(i, + miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME)); + break; + default: + printf("Fman1: 10GSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i)); + fm_info_set_phy_address(i, 0); + break; + } + } + + cpu_eth_init(bis); #endif |