diff options
author | Marek Vasut <marex@denx.de> | 2014-10-22 21:34:49 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2014-10-27 14:35:56 +0100 |
commit | 4109cb023f7e51addee10d9fb184d0a3adc789b4 (patch) | |
tree | 7108dbf5ef06776d0b0a69f8c479b5a73e03cc65 /board/exmeritus | |
parent | 5038d7f189267004d924e827cf51d7520d65e42b (diff) | |
download | u-boot-imx-4109cb023f7e51addee10d9fb184d0a3adc789b4.zip u-boot-imx-4109cb023f7e51addee10d9fb184d0a3adc789b4.tar.gz u-boot-imx-4109cb023f7e51addee10d9fb184d0a3adc789b4.tar.bz2 |
ppc: Zap HWW1U1A board
This is the only used of CONFIG_SPI_X macro, just zap this.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'board/exmeritus')
-rw-r--r-- | board/exmeritus/hww1u1a/Kconfig | 12 | ||||
-rw-r--r-- | board/exmeritus/hww1u1a/MAINTAINERS | 6 | ||||
-rw-r--r-- | board/exmeritus/hww1u1a/Makefile | 12 | ||||
-rw-r--r-- | board/exmeritus/hww1u1a/ddr.c | 34 | ||||
-rw-r--r-- | board/exmeritus/hww1u1a/gpios.h | 56 | ||||
-rw-r--r-- | board/exmeritus/hww1u1a/hww1u1a.c | 268 | ||||
-rw-r--r-- | board/exmeritus/hww1u1a/law.c | 18 | ||||
-rw-r--r-- | board/exmeritus/hww1u1a/tlb.c | 90 |
8 files changed, 0 insertions, 496 deletions
diff --git a/board/exmeritus/hww1u1a/Kconfig b/board/exmeritus/hww1u1a/Kconfig deleted file mode 100644 index 7a76b43..0000000 --- a/board/exmeritus/hww1u1a/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_HWW1U1A - -config SYS_BOARD - default "hww1u1a" - -config SYS_VENDOR - default "exmeritus" - -config SYS_CONFIG_NAME - default "HWW1U1A" - -endif diff --git a/board/exmeritus/hww1u1a/MAINTAINERS b/board/exmeritus/hww1u1a/MAINTAINERS deleted file mode 100644 index b37f10b..0000000 --- a/board/exmeritus/hww1u1a/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -HWW1U1A BOARD -#M: Kyle Moffett <Kyle.D.Moffett@boeing.com> -S: Orphan (since 2014-06) -F: board/exmeritus/hww1u1a/ -F: include/configs/HWW1U1A.h -F: configs/HWW1U1A_defconfig diff --git a/board/exmeritus/hww1u1a/Makefile b/board/exmeritus/hww1u1a/Makefile deleted file mode 100644 index d0cd878..0000000 --- a/board/exmeritus/hww1u1a/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright 2007-2009 Freescale Semiconductor, Inc. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += hww1u1a.o -obj-y += law.o -obj-y += tlb.o -obj-$(CONFIG_DDR_SPD) += ddr.o diff --git a/board/exmeritus/hww1u1a/ddr.c b/board/exmeritus/hww1u1a/ddr.c deleted file mode 100644 index e1f6865..0000000 --- a/board/exmeritus/hww1u1a/ddr.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2009-2010 eXMeritus, A Boeing Company - * Copyright 2008-2009 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include <common.h> - -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - /* - * We only support one DIMM, so according to the P2020 docs we should - * set the options as follows: - */ - popts->cs_local_opts[0].odt_rd_cfg = 0; - popts->cs_local_opts[0].odt_wr_cfg = 4; - popts->cs_local_opts[1].odt_rd_cfg = 0; - popts->cs_local_opts[1].odt_wr_cfg = 0; - popts->half_strength_driver_enable = 0; - - /* Manually configured for our static clock rate */ - popts->clk_adjust = 4; - popts->cpo_override = 4; - popts->write_data_delay = 2; - popts->twot_en = 0; -} diff --git a/board/exmeritus/hww1u1a/gpios.h b/board/exmeritus/hww1u1a/gpios.h deleted file mode 100644 index 499880f..0000000 --- a/board/exmeritus/hww1u1a/gpios.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright 2010 eXMeritus, A Boeing Company - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/mpc85xx_gpio.h> - -/* Common CPU A/B GPIOs (GPIO8-GPIO15 and IRQ4-IRQ6) */ -#define GPIO_CPU_ID (1UL << (31 - 8)) -#define GPIO_BLUE_LED (1UL << (31 - 9)) -#define GPIO_DIMM_RESET (1UL << (31 - 10)) -#define GPIO_USB_RESET (1UL << (31 - 11)) -#define GPIO_UNUSED_12 (1UL << (31 - 12)) -#define GPIO_GETH0_RESET (1UL << (31 - 13)) -#define GPIO_RS422_RE (1UL << (31 - 14)) -#define GPIO_RS422_DE (1UL << (31 - 15)) -#define IRQ_I2CINT (1UL << (31 - 20)) -#define IRQ_FANINT (1UL << (31 - 21)) -#define IRQ_DIMM_EVENT (1UL << (31 - 22)) - -#define GPIO_RESETS (GPIO_DIMM_RESET|GPIO_USB_RESET|GPIO_GETH0_RESET) - -/* CPU A GPIOS (GPIO0-GPIO7 and IRQ0-IRQ3) */ -#define GPIO_CPUA_UNUSED_0 (1UL << (31 - 0)) -#define GPIO_CPUA_CPU_READY (1UL << (31 - 1)) -#define GPIO_CPUA_DEBUG_LED2 (1UL << (31 - 2)) -#define GPIO_CPUA_DEBUG_LED1 (1UL << (31 - 3)) -#define GPIO_CPUA_TDIS2B (1UL << (31 - 4)) /* MAC 2 TX B */ -#define GPIO_CPUA_TDIS2A (1UL << (31 - 5)) /* MAC 2 TX A */ -#define GPIO_CPUA_TDIS1B (1UL << (31 - 6)) /* MAC 1 TX B */ -#define GPIO_CPUA_TDIS1A (1UL << (31 - 7)) /* MAC 1 TX A */ -#define IRQ_CPUA_UNUSED_0 (1UL << (31 - 16)) -#define IRQ_CPUA_UNUSED_1 (1UL << (31 - 17)) -#define IRQ_CPUA_UNUSED_2 (1UL << (31 - 18)) -#define IRQ_CPUA_UNUSED_3 (1UL << (31 - 19)) - -/* CPU B GPIOS (GPIO0-GPIO7 and IRQ0-IRQ3) */ -#define GPIO_CPUB_RMUX_SEL1B (1UL << (31 - 0)) -#define GPIO_CPUB_RMUX_SEL0B (1UL << (31 - 1)) -#define GPIO_CPUB_RMUX_SEL1A (1UL << (31 - 2)) -#define GPIO_CPUB_RMUX_SEL0A (1UL << (31 - 3)) -#define GPIO_CPUB_UNUSED_4 (1UL << (31 - 4)) -#define GPIO_CPUB_CPU_READY (1UL << (31 - 5)) -#define GPIO_CPUB_DEBUG_LED2 (1UL << (31 - 6)) -#define GPIO_CPUB_DEBUG_LED1 (1UL << (31 - 7)) -#define IRQ_CPUB_SD_1A (1UL << (31 - 16)) -#define IRQ_CPUB_SD_2B (1UL << (31 - 17)) -#define IRQ_CPUB_SD_2A (1UL << (31 - 18)) -#define IRQ_CPUB_SD_1B (1UL << (31 - 19)) - -/* If it isn't CPU A then it's CPU B */ -static inline unsigned int hww1u1a_is_cpu_a(void) -{ - return !mpc85xx_gpio_get(GPIO_CPU_ID); -} diff --git a/board/exmeritus/hww1u1a/hww1u1a.c b/board/exmeritus/hww1u1a/hww1u1a.c deleted file mode 100644 index 643ece1..0000000 --- a/board/exmeritus/hww1u1a/hww1u1a.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Copyright 2009-2011 eXMeritus, A Boeing Company - * Copyright 2007-2009 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/cache.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_pci.h> -#include <fsl_ddr_sdram.h> -#include <asm/io.h> -#include <miiphy.h> -#include <libfdt.h> -#include <linux/ctype.h> -#include <fdt_support.h> -#include <fsl_mdio.h> -#include <tsec.h> -#include <asm/fsl_law.h> -#include <netdev.h> -#include <malloc.h> -#include <i2c.h> -#include <pca953x.h> - -#include "gpios.h" - -DECLARE_GLOBAL_DATA_PTR; - -int checkboard(void) -{ - unsigned int gpio_high = 0; - unsigned int gpio_low = 0; - unsigned int gpio_in = 0; - unsigned int i; - struct ccsr_ddr __iomem *ddr; - - puts("Board: HWW-1U-1A "); - - /* - * First just figure out which CPU we're on, then use that to - * configure the lists of other GPIOs to be programmed. - */ - mpc85xx_gpio_set_in(GPIO_CPU_ID); - if (hww1u1a_is_cpu_a()) { - puts("CPU A\n"); - - /* We want to turn on some LEDs */ - gpio_high |= GPIO_CPUA_CPU_READY; - gpio_low |= GPIO_CPUA_DEBUG_LED1; - gpio_low |= GPIO_CPUA_DEBUG_LED2; - - /* Disable the unused transmitters */ - gpio_low |= GPIO_CPUA_TDIS1A; - gpio_high |= GPIO_CPUA_TDIS1B; - gpio_low |= GPIO_CPUA_TDIS2A; - gpio_high |= GPIO_CPUA_TDIS2B; - } else { - puts("CPU B\n"); - - /* We want to turn on some LEDs */ - gpio_high |= GPIO_CPUB_CPU_READY; - gpio_low |= GPIO_CPUB_DEBUG_LED1; - gpio_low |= GPIO_CPUB_DEBUG_LED2; - - /* Enable the appropriate receivers */ - gpio_high |= GPIO_CPUB_RMUX_SEL0A; - gpio_high |= GPIO_CPUB_RMUX_SEL0B; - gpio_low |= GPIO_CPUB_RMUX_SEL1A; - gpio_low |= GPIO_CPUB_RMUX_SEL1B; - } - - /* These GPIOs are common */ - gpio_in |= IRQ_I2CINT | IRQ_FANINT | IRQ_DIMM_EVENT; - gpio_low |= GPIO_RS422_RE; - gpio_high |= GPIO_RS422_DE; - - /* Ok, now go ahead and program all of those in one go */ - mpc85xx_gpio_set(gpio_high|gpio_low|gpio_in, - gpio_high|gpio_low, - gpio_high); - - /* - * If things have been taken out of reset early (for example, by one - * of the BDI3000 debuggers), then we need to put them back in reset - * and delay a while before we continue. - */ - if (mpc85xx_gpio_get(GPIO_RESETS)) { - ddr = (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - - puts("Debugger detected... extra device reset enabled!\n"); - - /* Put stuff into reset and disable the DDR controller */ - mpc85xx_gpio_set_low(GPIO_RESETS); - out_be32(&ddr->sdram_cfg, 0x00000000); - - puts(" Waiting 1 sec for reset..."); - for (i = 0; i < 10; i++) { - udelay(100000); - puts("."); - } - puts("\n"); - } - - /* Now bring everything back out of reset again */ - mpc85xx_gpio_set_high(GPIO_RESETS); - return 0; -} - -/* - * This little shell function just returns whether or not it's CPU A. - * It can be used to select the right device-tree when booting, etc. - */ -int do_hww1u1a_test_cpu_a(cmd_tbl_t *cmdtp, int flag, - int argc, char * const argv[]) -{ - if (argc > 1) - cmd_usage(cmdtp); - - if (hww1u1a_is_cpu_a()) - return 0; - else - return 1; -} -U_BOOT_CMD( - test_cpu_a, 1, 0, do_hww1u1a_test_cpu_a, - "Test if this is CPU A (versus B) on the eXMeritus HWW-1U-1A board", - "" -); - -/* Create a prompt-like string: "uboot@HOSTNAME% " */ -#define PROMPT_PREFIX "uboot@exm" -#define PROMPT_SUFFIX "% " - -/* This function returns a PS1 prompt based on the serial number */ -static char *hww1u1a_prompt; -const char *hww1u1a_get_ps1(void) -{ - unsigned long len, i, j; - const char *serialnr; - - /* If our prompt was already set, just use that */ - if (hww1u1a_prompt) - return hww1u1a_prompt; - - /* Use our serial number if present, otherwise a default */ - serialnr = getenv("serial#"); - if (!serialnr || !serialnr[0]) - serialnr = "999999-X"; - - /* - * We will turn the serial number into a hostname by: - * (A) Delete all non-alphanumerics. - * (B) Lowercase all letters. - * (C) Prefix "exm". - * (D) Suffix "a" for CPU A and "b" for CPU B. - */ - for (i = 0, len = 0; serialnr[i]; i++) { - if (isalnum(serialnr[i])) - len++; - } - - len += sizeof(PROMPT_PREFIX PROMPT_SUFFIX) + 1; /* Includes NUL */ - hww1u1a_prompt = malloc(len); - if (!hww1u1a_prompt) - return PROMPT_PREFIX "UNKNOWN(ENOMEM)" PROMPT_SUFFIX; - - /* Now actually fill it in */ - i = 0; - - /* Handle the prefix */ - for (j = 0; j < sizeof(PROMPT_PREFIX) - 1; j++) - hww1u1a_prompt[i++] = PROMPT_PREFIX[j]; - - /* Now the serial# part of the hostname */ - for (j = 0; serialnr[j]; j++) - if (isalnum(serialnr[j])) - hww1u1a_prompt[i++] = tolower(serialnr[j]); - - /* Now the CPU id ("a" or "b") */ - hww1u1a_prompt[i++] = hww1u1a_is_cpu_a() ? 'a' : 'b'; - - /* Finally the suffix */ - for (j = 0; j < sizeof(PROMPT_SUFFIX); j++) - hww1u1a_prompt[i++] = PROMPT_SUFFIX[j]; - - /* This should all have added up, but just in case */ - hww1u1a_prompt[len - 1] = '\0'; - - /* Now we're done */ - return hww1u1a_prompt; -} - -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - int flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap bootflash region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - if (flash_esel == -1) { - /* very unlikely unless something is messed up */ - puts("Error: Could not find TLB for FLASH BASE\n"); - flash_esel = 2; /* give our best effort to continue */ - } else { - /* invalidate existing TLB entry for FLASH */ - disable_tlb(flash_esel); - } - - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); - - return 0; -} - -int board_eth_init(bd_t *bis) -{ - struct tsec_info_struct tsec_info[4]; - struct fsl_pq_mdio_info mdio_info; - - SET_STD_TSEC_INFO(tsec_info[0], 1); - SET_STD_TSEC_INFO(tsec_info[1], 2); - SET_STD_TSEC_INFO(tsec_info[2], 3); - - if (hww1u1a_is_cpu_a()) - tsec_info[2].phyaddr = TSEC3_PHY_ADDR_CPUA; - else - tsec_info[2].phyaddr = TSEC3_PHY_ADDR_CPUB; - - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; - mdio_info.name = DEFAULT_MII_NAME; - fsl_pq_mdio_init(bis, &mdio_info); - - tsec_eth_init(bis, tsec_info, 3); - return pci_eth_init(bis); -} - -void ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = getenv_bootm_low(); - size = getenv_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - - FT_FSL_PCI_SETUP; -} diff --git a/board/exmeritus/hww1u1a/law.c b/board/exmeritus/hww1u1a/law.c deleted file mode 100644 index c7dc58d..0000000 --- a/board/exmeritus/hww1u1a/law.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright 2008-2009 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/exmeritus/hww1u1a/tlb.c b/board/exmeritus/hww1u1a/tlb.c deleted file mode 100644 index 7f5a36f..0000000 --- a/board/exmeritus/hww1u1a/tlb.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright 2009-2010 eXMeritus, A Boeing Company - * Copyright 2008-2009 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 0 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 0 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Boot page */ - SET_TLB_ENTRY(1, CONFIG_BPTR_VIRT_ADDR, - CONFIG_BPTR_VIRT_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_4K, 1), - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, - CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - - /* - * W**G* - FLASH (Will be *I*G* after relocation to RAM) - * - * This maps both SPI FLASH chips (128MByte per chip) - */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - /* - * *I*G* - PCI memory - * - * We have 1.5GB total PCI-E memory space to map and we want to use - * the minimum possible number of TLB entries. Since Book-E TLB - * entries are sized in powers of 4, we use 1GB + 256MB + 256MB. - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, - CONFIG_SYS_PCIE3_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1G, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), - - /* - * *I*G* - PCI I/O - * - * This one entry covers all 3 64k PCI-E I/O windows - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, - CONFIG_SYS_PCIE3_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256K, 1), -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); |