diff options
author | wdenk <wdenk> | 2002-03-08 21:31:05 +0000 |
---|---|---|
committer | wdenk <wdenk> | 2002-03-08 21:31:05 +0000 |
commit | 012771d88adfb5e0886591880041f05fc8b15bdd (patch) | |
tree | 9cd947b8b4c6f05cff5be1b69a0f1ca81b2c86ec /board/evb64260/bootseq.txt | |
parent | 67fc21f34ef642417e7418a0575d5b5ff70d77d8 (diff) | |
download | u-boot-imx-012771d88adfb5e0886591880041f05fc8b15bdd.zip u-boot-imx-012771d88adfb5e0886591880041f05fc8b15bdd.tar.gz u-boot-imx-012771d88adfb5e0886591880041f05fc8b15bdd.tar.bz2 |
Initial revision
Diffstat (limited to 'board/evb64260/bootseq.txt')
-rw-r--r-- | board/evb64260/bootseq.txt | 94 |
1 files changed, 94 insertions, 0 deletions
diff --git a/board/evb64260/bootseq.txt b/board/evb64260/bootseq.txt new file mode 100644 index 0000000..648c2ff --- /dev/null +++ b/board/evb64260/bootseq.txt @@ -0,0 +1,94 @@ +(cpu/mpc7xxx/start.S) + +start: + b boot_cold + +start_warm: + b boot_warm + + +boot_cold: +boot_warm: + clear bats + init l2 (if enabled) + init altivec (if enabled) + invalidate l2 (if enabled) + setup bats (from defines in config_EVB) + enable_addr_trans: (if MMU enabled) + enable MSR_IR and MSR_DR + jump to in_flash + +in_flash: + enable l1 dcache + gal_low_init: (board/evb64260/sdram_init.S) + config SDRAM (CFG, TIMING, DECODE) + init scratch regs (810 + 814) + + detect DIMM0 (bank 0 only) + config SDRAM_PARA0 to 256/512Mbit + bl sdram_op_mode + detect bank0 width + write scratch reg 810 + config SDRAM_PARA0 with results + config SDRAM_PARA1 with results + + detect DIMM1 (bank 2 only) + config SDRAM_PARA2 to 256/512Mbit + detect bank2 width + write scratch reg 814 + config SDRAM_PARA2 with results + config SDRAM_PARA3 with results + + setup device bus timings/width + setup boot device timings/width + + setup CPU_CONF (0x0) + setup cpu master control register 0x160 + setup PCI0 TIMEOUT + setup PCI1 TIMEOUT + setup PCI0 BAR + setup PCI1 BAR + + setup MPP control 0-3 + setup GPP level control + setup Serial ports multiplex + + setup stack pointer (r1) + setup GOT + call cpu_init_f + debug leds + board_init_f: (common/board.c) + board_pre_init: + remap gt regs? + map PCI mem/io + map device space + clear out interupts + init_timebase + env_init + serial_init + console_init_f + display_options + initdram: (board/evb64260/evb64260.c) + detect memory + for each bank: + dram_size() + setup PCI slave memory mappings + setup SCS + setup monitor + alloc board info struct + init bd struct + relocate_code: (cpu/mpc7xxx/start.S) + copy,got,clearbss + board_init_r(bd, dest_addr) (common/board.c) + setup bd function pointers + trap_init + flash_init: (board/evb64260/flash.c) + setup bd flash info + cpu_init_r: (cpu/mpc7xxx/cpu_init.c) + nothing + mem_malloc_init + malloc_bin_reloc + spi_init (r or f)??? (CFG_ENV_IS_IN_EEPROM) + env_relocated + misc_init_r(bd): (board/evb64260/evb64260.c) + mpsc_init2 |