ppc4xx: remove OCRTC board

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>

7 files changed, 0 insertions, 340 deletions

diff --git a/board/esd/ocrtc/Kconfig b/board/esd/ocrtc/Kconfig
deleted file mode 100644
index 44b402d..0000000
--- a/board/esd/ocrtc/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OCRTC
-
-config SYS_BOARD
-	default "ocrtc"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "OCRTC"
-
-endif
diff --git a/board/esd/ocrtc/MAINTAINERS b/board/esd/ocrtc/MAINTAINERS
deleted file mode 100644
index 85c1a12..0000000
--- a/board/esd/ocrtc/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-OCRTC BOARD
-M:	Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-S:	Maintained
-F:	board/esd/ocrtc/
-F:	include/configs/OCRTC.h
-F:	configs/OCRTC_defconfig
diff --git a/board/esd/ocrtc/Makefile b/board/esd/ocrtc/Makefile
deleted file mode 100644
index 44b7d5d..0000000
--- a/board/esd/ocrtc/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= ocrtc.o flash.o ../common/misc.o cmd_ocrtc.o
diff --git a/board/esd/ocrtc/cmd_ocrtc.c b/board/esd/ocrtc/cmd_ocrtc.c
deleted file mode 100644
index 6dcbd8b..0000000
--- a/board/esd/ocrtc/cmd_ocrtc.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <pci_ids.h>
-#include <asm/4xx_pci.h>
-
-
-#if defined(CONFIG_CMD_BSP)
-
-/*
- * Set device number on pci board
- */
-int do_setdevice(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int idx = 1;	  /* start at 1 (skip device 0) */
-	pci_dev_t bdf = 0;
-	u32 addr;
-
-	while (bdf >= 0) {
-		if ((bdf = pci_find_device(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_405GP, idx++)) < 0) {
-			break;
-		}
-		printf("Found device nr %d at %x!\n", idx-1, bdf);
-		pci_read_config_dword(bdf, PCI_BASE_ADDRESS_1, &addr);
-		addr &= ~0xf;
-		*(u32 *)addr = (bdf & 0x0000f800) >> 11;
-		printf("Wrote %x at %x!\n", (bdf & 0x0000f800) >> 11, addr);
-	}
-
-	return 0;
-}
-U_BOOT_CMD(
-	setdevice,	1,	1,	do_setdevice,
-	"Set device number on pci adapter boards",
-	""
-);
-
-
-/*
- * Get device number on pci board
- */
-int do_getdevice(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	u32 device;
-	char str[32];
-
-	device = *(u32 *)0x0;
-	device = 0x16 - device;      /* calculate vxworks bp slot id */
-	sprintf(str, "%d", device);
-	setenv("slot", str);
-	printf("Variabel slot set to %x\n", device);
-
-	return 0;
-}
-U_BOOT_CMD(
-	getdevice,	1,	1,	do_getdevice,
-	"Get device number and set slot env variable",
-	""
-);
-
-#endif
diff --git a/board/esd/ocrtc/flash.c b/board/esd/ocrtc/flash.c
deleted file mode 100644
index 279746e..0000000
--- a/board/esd/ocrtc/flash.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-/*
- * include common flash code (for esd boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0, size_b1;
-	int i;
-	uint pbcr;
-	unsigned long base_b0, base_b1;
-	int size_val = 0;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	base_b0 = FLASH_BASE0_PRELIM;
-	size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0 << 20);
-	}
-
-	base_b1 = FLASH_BASE1_PRELIM;
-	size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
-
-	/* Re-do sizing to get full correct info */
-
-	if (size_b1) {
-		mtdcr (EBC0_CFGADDR, PB0CR);
-		pbcr = mfdcr (EBC0_CFGDATA);
-		mtdcr (EBC0_CFGADDR, PB0CR);
-		base_b1 = -size_b1;
-		switch (size_b1) {
-		case 1 << 20:
-			size_val = 0;
-			break;
-		case 2 << 20:
-			size_val = 1;
-			break;
-		case 4 << 20:
-			size_val = 2;
-			break;
-		case 8 << 20:
-			size_val = 3;
-			break;
-		case 16 << 20:
-			size_val = 4;
-			break;
-		}
-		pbcr = (pbcr & 0x0001ffff) | base_b1 | (size_val << 17);
-		mtdcr (EBC0_CFGDATA, pbcr);
-		/*          printf("PB1CR = %x\n", pbcr); */
-	}
-
-	if (size_b0) {
-		mtdcr (EBC0_CFGADDR, PB1CR);
-		pbcr = mfdcr (EBC0_CFGDATA);
-		mtdcr (EBC0_CFGADDR, PB1CR);
-		base_b0 = base_b1 - size_b0;
-		switch (size_b1) {
-		case 1 << 20:
-			size_val = 0;
-			break;
-		case 2 << 20:
-			size_val = 1;
-			break;
-		case 4 << 20:
-			size_val = 2;
-			break;
-		case 8 << 20:
-			size_val = 3;
-			break;
-		case 16 << 20:
-			size_val = 4;
-			break;
-		}
-		pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-		mtdcr (EBC0_CFGDATA, pbcr);
-		/*            printf("PB0CR = %x\n", pbcr); */
-	}
-
-	size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
-
-	flash_get_offsets (base_b0, &flash_info[0]);
-
-	/* monitor protection ON by default */
-	flash_protect (FLAG_PROTECT_SET,
-			base_b0 + size_b0 - monitor_flash_len,
-			base_b0 + size_b0 - 1, &flash_info[0]);
-
-	if (size_b1) {
-		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
-
-		flash_get_offsets (base_b1, &flash_info[1]);
-
-		/* monitor protection ON by default */
-		flash_protect (FLAG_PROTECT_SET,
-				base_b1 + size_b1 - monitor_flash_len,
-				base_b1 + size_b1 - 1, &flash_info[1]);
-		/* monitor protection OFF by default (one is enough) */
-		flash_protect (FLAG_PROTECT_CLEAR,
-				base_b0 + size_b0 - monitor_flash_len,
-				base_b0 + size_b0 - 1, &flash_info[0]);
-	} else {
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[1].sector_count = -1;
-	}
-
-	flash_info[0].size = size_b0;
-	flash_info[1].size = size_b1;
-
-	return (size_b0 + size_b1);
-}
diff --git a/board/esd/ocrtc/ocrtc.c b/board/esd/ocrtc/ocrtc.c
deleted file mode 100644
index b815961..0000000
--- a/board/esd/ocrtc/ocrtc.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include "ocrtc.h"
-#include <asm/processor.h>
-#include <i2c.h>
-#include <command.h>
-
-
-extern void lxt971_no_sleep(void);
-
-
-int board_early_init_f (void)
-{
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
-	 */
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr (UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr (UIC0CR, 0x00000000);	/* set all to be non-critical */
-	mtdcr (UIC0PR, 0xFFFFFF81);	/* set int polarities */
-	mtdcr (UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr (UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest priority */
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	/*
-	 * EBC Configuration Register: clear EBTC -> high-Z ebc signals between
-	 * transfers, set device-paced timeout to 256 cycles
-	 */
-	mtebc (EBC0_CFG, 0x20400000);
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard (void)
-{
-	char str[64];
-	int i = getenv_f("serial#", str, sizeof (str));
-
-	puts ("Board: ");
-
-	if (i == -1) {
-#ifdef CONFIG_OCRTC
-		puts ("### No HW ID - assuming OCRTC");
-#endif
-#ifdef CONFIG_ORSG
-		puts ("### No HW ID - assuming ORSG");
-#endif
-	} else {
-		puts (str);
-	}
-
-	putc ('\n');
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-
-	return (0);
-}
diff --git a/board/esd/ocrtc/ocrtc.h b/board/esd/ocrtc/ocrtc.h
deleted file mode 100644
index 029e27e..0000000
--- a/board/esd/ocrtc/ocrtc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- *                          Start Address    Length
- * +-----------------------+ 0x4000_0000     Start of Flash -----------------
- * | MON8xx code           | 0x4000_0100     Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused)              |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses    |                 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) |                 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address          |                 0x04
- * +-----------------------+ 0x4001_FFC0                     ^
- * | Hardware Information  |                 0x40            | MON8xx
- * +=======================+ 0x4002_0000 (sector border)    -----------------
- * | Autostart Header      |                                 | Applications
- * | ...                   |                                 v
- *
- *****************************************************************************/