diff options
| author | Matthias Fuchs <matthias.fuchs@esd-electronics.com> | 2009-02-20 10:19:19 +0100 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2009-03-20 22:39:14 +0100 |
| commit | bb57ad4be76d0e2e7f9ec56678235cc9872ff40f (patch) | |
| tree | d02d3c5da773f66005bd4c2151e40529d06d4c4a /board/esd/pmc440/pmc440.c | |
| parent | 049216f045fd8e0f45bcef121c2bb1c7d3de6988 (diff) | |
| download | u-boot-imx-bb57ad4be76d0e2e7f9ec56678235cc9872ff40f.zip u-boot-imx-bb57ad4be76d0e2e7f9ec56678235cc9872ff40f.tar.gz u-boot-imx-bb57ad4be76d0e2e7f9ec56678235cc9872ff40f.tar.bz2 | |
ppc4xx: Use correct io accessors for esd 405/440 boards
This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32
macros. Also volatile pointer references are replaced by the
new accessors.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board/esd/pmc440/pmc440.c')
| -rw-r--r-- | board/esd/pmc440/pmc440.c | 59 |
1 files changed, 31 insertions, 28 deletions
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index 3824105..2ab944d 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -107,31 +107,31 @@ int board_early_init_f(void) * Setup the GPIO pins * TODO: setup GPIOs via CONFIG_SYS_4xx_GPIO_TABLE in board's config file */ - out32(GPIO0_OR, 0x40000102); - out32(GPIO0_TCR, 0x4c90011f); - out32(GPIO0_OSRL, 0x28051400); - out32(GPIO0_OSRH, 0x55005000); - out32(GPIO0_TSRL, 0x08051400); - out32(GPIO0_TSRH, 0x55005000); - out32(GPIO0_ISR1L, 0x54000000); - out32(GPIO0_ISR1H, 0x00000000); - out32(GPIO0_ISR2L, 0x44000000); - out32(GPIO0_ISR2H, 0x00000100); - out32(GPIO0_ISR3L, 0x00000000); - out32(GPIO0_ISR3H, 0x00000000); - - out32(GPIO1_OR, 0x80002408); - out32(GPIO1_TCR, 0xd6003c08); - out32(GPIO1_OSRL, 0x0a5a0000); - out32(GPIO1_OSRH, 0x00000000); - out32(GPIO1_TSRL, 0x00000000); - out32(GPIO1_TSRH, 0x00000000); - out32(GPIO1_ISR1L, 0x00005555); - out32(GPIO1_ISR1H, 0x40000000); - out32(GPIO1_ISR2L, 0x04010000); - out32(GPIO1_ISR2H, 0x00000000); - out32(GPIO1_ISR3L, 0x01400000); - out32(GPIO1_ISR3H, 0x00000000); + out_be32((void *)GPIO0_OR, 0x40000102); + out_be32((void *)GPIO0_TCR, 0x4c90011f); + out_be32((void *)GPIO0_OSRL, 0x28051400); + out_be32((void *)GPIO0_OSRH, 0x55005000); + out_be32((void *)GPIO0_TSRL, 0x08051400); + out_be32((void *)GPIO0_TSRH, 0x55005000); + out_be32((void *)GPIO0_ISR1L, 0x54000000); + out_be32((void *)GPIO0_ISR1H, 0x00000000); + out_be32((void *)GPIO0_ISR2L, 0x44000000); + out_be32((void *)GPIO0_ISR2H, 0x00000100); + out_be32((void *)GPIO0_ISR3L, 0x00000000); + out_be32((void *)GPIO0_ISR3H, 0x00000000); + + out_be32((void *)GPIO1_OR, 0x80002408); + out_be32((void *)GPIO1_TCR, 0xd6003c08); + out_be32((void *)GPIO1_OSRL, 0x0a5a0000); + out_be32((void *)GPIO1_OSRH, 0x00000000); + out_be32((void *)GPIO1_TSRL, 0x00000000); + out_be32((void *)GPIO1_TSRH, 0x00000000); + out_be32((void *)GPIO1_ISR1L, 0x00005555); + out_be32((void *)GPIO1_ISR1H, 0x40000000); + out_be32((void *)GPIO1_ISR2L, 0x04010000); + out_be32((void *)GPIO1_ISR2H, 0x00000000); + out_be32((void *)GPIO1_ISR3L, 0x01400000); + out_be32((void *)GPIO1_ISR3H, 0x00000000); /* patch PLB:PCI divider for 66MHz PCI */ mfcpr(clk_spcid, reg); @@ -804,17 +804,20 @@ int eeprom_write_enable(unsigned dev_addr, int state) switch (state) { case 1: /* Enable write access, clear bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~GPIO0_EP_EEP); + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) & ~GPIO0_EP_EEP); state = 0; break; case 0: /* Disable write access, set bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) | GPIO0_EP_EEP); + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) | GPIO0_EP_EEP); state = 0; break; default: /* Read current status back. */ - state = (0 == (in32(GPIO0_OR) & GPIO0_EP_EEP)); + state = (0 == (in_be32((void *)GPIO0_OR) + & GPIO0_EP_EEP)); break; } } |