diff options
author | Wolfgang Denk <wd@denx.de> | 2008-05-20 16:00:29 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2008-05-21 00:14:08 +0200 |
commit | 53677ef18e25c97ac613349087c5cb33ae5a2741 (patch) | |
tree | f947d34d6efaee2401ea0e4c6104ef2f6a0f7ad0 /board/esd/cpci750 | |
parent | 727f63334676e760877d43bfb8f0e9331ac8b101 (diff) | |
download | u-boot-imx-53677ef18e25c97ac613349087c5cb33ae5a2741.zip u-boot-imx-53677ef18e25c97ac613349087c5cb33ae5a2741.tar.gz u-boot-imx-53677ef18e25c97ac613349087c5cb33ae5a2741.tar.bz2 |
Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).
Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'board/esd/cpci750')
-rw-r--r-- | board/esd/cpci750/mpsc.c | 2 | ||||
-rw-r--r-- | board/esd/cpci750/mpsc.h | 6 | ||||
-rw-r--r-- | board/esd/cpci750/mv_eth.c | 62 | ||||
-rw-r--r-- | board/esd/cpci750/sdram_init.c | 259 | ||||
-rw-r--r-- | board/esd/cpci750/u-boot.lds | 8 |
5 files changed, 168 insertions, 169 deletions
diff --git a/board/esd/cpci750/mpsc.c b/board/esd/cpci750/mpsc.c index 25c10e0..fa8d3bd 100644 --- a/board/esd/cpci750/mpsc.c +++ b/board/esd/cpci750/mpsc.c @@ -426,7 +426,7 @@ void mpsc_sdma_init (void) (MV64360_SDMA_WIN_ACCESS_FULL << (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2))); -/* Setup MPSC internal address space base address */ +/* Setup MPSC internal address space base address */ GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS); /* no high address remap*/ diff --git a/board/esd/cpci750/mpsc.h b/board/esd/cpci750/mpsc.h index a03d1cc..aa0f862 100644 --- a/board/esd/cpci750/mpsc.h +++ b/board/esd/cpci750/mpsc.h @@ -67,9 +67,9 @@ extern int (*mpsc_test_char)(void); #define TX_STOP 0x00010000 #define RX_ENABLE 0x00000080 -#define SDMA_RX_ABORT (1 << 15) -#define SDMA_TX_ABORT (1 << 31) -#define MPSC_TX_ABORT (1 << 7) +#define SDMA_RX_ABORT (1 << 15) +#define SDMA_TX_ABORT (1 << 31) +#define MPSC_TX_ABORT (1 << 7) #define MPSC_RX_ABORT (1 << 23) #define MPSC_ENTER_HUNT (1 << 31) diff --git a/board/esd/cpci750/mv_eth.c b/board/esd/cpci750/mv_eth.c index bc84ef0..1c21527 100644 --- a/board/esd/cpci750/mv_eth.c +++ b/board/esd/cpci750/mv_eth.c @@ -1392,7 +1392,7 @@ u32 mv_get_internal_sram_base (void) * port_phy_addr). * * INPUT: -* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct +* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct * * OUTPUT: * See description. @@ -1552,7 +1552,7 @@ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl) * ether_init_rx_desc_ring for Rx queues). * * INPUT: -* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct +* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct * * OUTPUT: * Ethernet port is ready to receive and transmit. @@ -1642,7 +1642,7 @@ static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl) * INPUT: * ETH_PORT eth_port_num Port number. * char * p_addr Address to be set -* ETH_QUEUE queue Rx queue number for this MAC address. +* ETH_QUEUE queue Rx queue number for this MAC address. * * OUTPUT: * Set MAC address low and high registers. also calls eth_port_uc_addr() @@ -1680,10 +1680,10 @@ static void eth_port_uc_addr_set (ETH_PORT eth_port_num, * parameters. * * INPUT: -* ETH_PORT eth_port_num Port number. +* ETH_PORT eth_port_num Port number. * unsigned char uc_nibble Unicast MAC Address last nibble. -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. * * OUTPUT: * This function add/removes MAC addresses from the port unicast address @@ -1762,10 +1762,10 @@ static bool eth_port_uc_addr (ETH_PORT eth_port_num, * In this case, the function calculates the CRC-8bit value and calls * eth_port_omc_addr() routine to set the Other Multicast Table. * INPUT: -* ETH_PORT eth_port_num Port number. -* unsigned char *p_addr Unicast MAC Address. -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. +* ETH_PORT eth_port_num Port number. +* unsigned char *p_addr Unicast MAC Address. +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. * * OUTPUT: * See description. @@ -1896,10 +1896,10 @@ static void eth_port_mc_addr (ETH_PORT eth_port_num, * according to the argument given. * * INPUT: -* ETH_PORT eth_port_num Port number. -* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits). -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. +* ETH_PORT eth_port_num Port number. +* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits). +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. * * OUTPUT: * See description. @@ -1960,10 +1960,10 @@ static bool eth_port_smc_addr (ETH_PORT eth_port_num, * CRC-8 argument given. * * INPUT: -* ETH_PORT eth_port_num Port number. -* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1). -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. +* ETH_PORT eth_port_num Port number. +* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1). +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. * * OUTPUT: * See description. @@ -2204,7 +2204,7 @@ static bool ethernet_phy_reset (ETH_PORT eth_port_num) * eth_port_reset - Reset Ethernet port * * DESCRIPTION: - * This routine resets the chip by aborting any SDMA engine activity and + * This routine resets the chip by aborting any SDMA engine activity and * clearing the MIB counters. The Receiver and the Transmit unit are in * idle state after this command is performed and the port is disabled. * @@ -2557,9 +2557,9 @@ static void eth_set_access_control (ETH_PORT eth_port_num, * * INPUT: * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE rx_queue Number of Rx queue. - * int rx_desc_num Number of Rx descriptors - * int rx_buff_size Size of Rx buffer + * ETH_QUEUE rx_queue Number of Rx queue. + * int rx_desc_num Number of Rx descriptors + * int rx_buff_size Size of Rx buffer * unsigned int rx_desc_base_addr Rx descriptors memory area base addr. * unsigned int rx_buff_base_addr Rx buffer memory area base addr. * @@ -2651,9 +2651,9 @@ static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, * * INPUT: * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE tx_queue Number of Tx queue. - * int tx_desc_num Number of Tx descriptors - * int tx_buff_size Size of Tx buffer + * ETH_QUEUE tx_queue Number of Tx queue. + * int tx_desc_num Number of Tx descriptors + * int tx_buff_size Size of Tx buffer * unsigned int tx_desc_base_addr Tx descriptors memory area base addr. * unsigned int tx_buff_base_addr Tx buffer memory area base addr. * @@ -2746,7 +2746,7 @@ static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, * * INPUT: * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE tx_queue Number of Tx queue. + * ETH_QUEUE tx_queue Number of Tx queue. * PKT_INFO *p_pkt_info User packet buffer. * * OUTPUT: @@ -2862,7 +2862,7 @@ static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl, * * INPUT: * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE tx_queue Number of Tx queue. + * ETH_QUEUE tx_queue Number of Tx queue. * PKT_INFO *p_pkt_info User packet buffer. * * OUTPUT: @@ -2931,7 +2931,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO * * eth_port_receive - Get received information from Rx ring. * * DESCRIPTION: - * This routine returns the received data to the caller. There is no + * This routine returns the received data to the caller. There is no * data copying during routine operation. All information is returned * using pointer to packet information struct passed from the caller. * If the routine exhausts Rx ring resources then the resource error flag @@ -2939,7 +2939,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO * * * INPUT: * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE rx_queue Number of Rx queue. + * ETH_QUEUE rx_queue Number of Rx queue. * PKT_INFO *p_pkt_info User packet buffer. * * OUTPUT: @@ -2981,7 +2981,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl, /* Nothing to receive... */ if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) { -/* DP(printf("Rx: command_status: %08x\n", command_status)); */ +/* DP(printf("Rx: command_status: %08x\n", command_status)); */ D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0); /* DP(printf("\nETH_END_OF_JOB ...\n"));*/ return ETH_END_OF_JOB; @@ -3020,7 +3020,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl, * * INPUT: * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE rx_queue Number of Rx queue. + * ETH_QUEUE rx_queue Number of Rx queue. * PKT_INFO *p_pkt_info Information on the returned buffer. * * OUTPUT: diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c index 78d1880..f43e83f 100644 --- a/board/esd/cpci750/sdram_init.c +++ b/board/esd/cpci750/sdram_init.c @@ -106,7 +106,7 @@ memory_map_bank(unsigned int bankNo, return 0; } -#define GB (1 << 30) +#define GB (1 << 30) /* much of this code is based on (or is) the code in the pip405 port */ /* thanks go to the authors of said port - Josh */ @@ -134,86 +134,85 @@ typedef enum _max_CL_supported_SD {SD_CL_1=1, SD_CL_2, SD_CL_3, SD_CL_4, SD_CL /* SDRAM/DDR information struct */ -typedef struct _gtMemoryDimmInfo -{ - MEMORY_TYPE memoryType; - unsigned int numOfRowAddresses; - unsigned int numOfColAddresses; - unsigned int numOfModuleBanks; - unsigned int dataWidth; - VOLTAGE_INTERFACE voltageInterface; - unsigned int errorCheckType; /* ECC , PARITY..*/ - unsigned int sdramWidth; /* 4,8,16 or 32 */; - unsigned int errorCheckDataWidth; /* 0 - no, 1 - Yes */ - unsigned int minClkDelay; - unsigned int burstLengthSupported; - unsigned int numOfBanksOnEachDevice; - unsigned int suportedCasLatencies; - unsigned int RefreshInterval; - unsigned int maxCASlatencySupported_LoP; /* LoP left of point (measured in ns) */ - unsigned int maxCASlatencySupported_RoP; /* RoP right of point (measured in ns)*/ - MAX_CL_SUPPORTED_DDR maxClSupported_DDR; - MAX_CL_SUPPORTED_SD maxClSupported_SD; - unsigned int moduleBankDensity; - /* module attributes (true for yes) */ - bool bufferedAddrAndControlInputs; - bool registeredAddrAndControlInputs; - bool onCardPLL; - bool bufferedDQMBinputs; - bool registeredDQMBinputs; - bool differentialClockInput; - bool redundantRowAddressing; - - /* module general attributes */ - bool suportedAutoPreCharge; - bool suportedPreChargeAll; - bool suportedEarlyRasPreCharge; - bool suportedWrite1ReadBurst; - bool suported5PercentLowVCC; - bool suported5PercentUpperVCC; - /* module timing parameters */ - unsigned int minRasToCasDelay; - unsigned int minRowActiveRowActiveDelay; - unsigned int minRasPulseWidth; - unsigned int minRowPrechargeTime; /* measured in ns */ - - int addrAndCommandHoldTime; /* LoP left of point (measured in ns) */ - int addrAndCommandSetupTime; /* (measured in ns/100) */ - int dataInputSetupTime; /* LoP left of point (measured in ns) */ - int dataInputHoldTime; /* LoP left of point (measured in ns) */ +typedef struct _gtMemoryDimmInfo { + MEMORY_TYPE memoryType; + unsigned int numOfRowAddresses; + unsigned int numOfColAddresses; + unsigned int numOfModuleBanks; + unsigned int dataWidth; + VOLTAGE_INTERFACE voltageInterface; + unsigned int errorCheckType; /* ECC , PARITY.. */ + unsigned int sdramWidth; /* 4,8,16 or 32 */ ; + unsigned int errorCheckDataWidth; /* 0 - no, 1 - Yes */ + unsigned int minClkDelay; + unsigned int burstLengthSupported; + unsigned int numOfBanksOnEachDevice; + unsigned int suportedCasLatencies; + unsigned int RefreshInterval; + unsigned int maxCASlatencySupported_LoP; /* LoP left of point (measured in ns) */ + unsigned int maxCASlatencySupported_RoP; /* RoP right of point (measured in ns) */ + MAX_CL_SUPPORTED_DDR maxClSupported_DDR; + MAX_CL_SUPPORTED_SD maxClSupported_SD; + unsigned int moduleBankDensity; + /* module attributes (true for yes) */ + bool bufferedAddrAndControlInputs; + bool registeredAddrAndControlInputs; + bool onCardPLL; + bool bufferedDQMBinputs; + bool registeredDQMBinputs; + bool differentialClockInput; + bool redundantRowAddressing; + + /* module general attributes */ + bool suportedAutoPreCharge; + bool suportedPreChargeAll; + bool suportedEarlyRasPreCharge; + bool suportedWrite1ReadBurst; + bool suported5PercentLowVCC; + bool suported5PercentUpperVCC; + /* module timing parameters */ + unsigned int minRasToCasDelay; + unsigned int minRowActiveRowActiveDelay; + unsigned int minRasPulseWidth; + unsigned int minRowPrechargeTime; /* measured in ns */ + + int addrAndCommandHoldTime; /* LoP left of point (measured in ns) */ + int addrAndCommandSetupTime; /* (measured in ns/100) */ + int dataInputSetupTime; /* LoP left of point (measured in ns) */ + int dataInputHoldTime; /* LoP left of point (measured in ns) */ /* tAC times for highest 2nd and 3rd highest CAS Latency values */ - unsigned int clockToDataOut_LoP; /* LoP left of point (measured in ns) */ - unsigned int clockToDataOut_RoP; /* RoP right of point (measured in ns)*/ - unsigned int clockToDataOutMinus1_LoP; /* LoP left of point (measured in ns) */ - unsigned int clockToDataOutMinus1_RoP; /* RoP right of point (measured in ns)*/ - unsigned int clockToDataOutMinus2_LoP; /* LoP left of point (measured in ns) */ - unsigned int clockToDataOutMinus2_RoP; /* RoP right of point (measured in ns)*/ - - unsigned int minimumCycleTimeAtMaxCasLatancy_LoP; /* LoP left of point (measured in ns) */ - unsigned int minimumCycleTimeAtMaxCasLatancy_RoP; /* RoP right of point (measured in ns)*/ - - unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP; /* LoP left of point (measured in ns) */ - unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP; /* RoP right of point (measured in ns)*/ - - unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP; /* LoP left of point (measured in ns) */ - unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP; /* RoP right of point (measured in ns)*/ - - /* Parameters calculated from - the extracted DIMM information */ - unsigned int size; - unsigned int deviceDensity; /* 16,64,128,256 or 512 Mbit */ - unsigned int numberOfDevices; - uchar drb_size; /* DRAM size in n*64Mbit */ - uchar slot; /* Slot Number this module is inserted in */ - uchar spd_raw_data[128]; /* Content of SPD-EEPROM copied 1:1 */ + unsigned int clockToDataOut_LoP; /* LoP left of point (measured in ns) */ + unsigned int clockToDataOut_RoP; /* RoP right of point (measured in ns) */ + unsigned int clockToDataOutMinus1_LoP; /* LoP left of point (measured in ns) */ + unsigned int clockToDataOutMinus1_RoP; /* RoP right of point (measured in ns) */ + unsigned int clockToDataOutMinus2_LoP; /* LoP left of point (measured in ns) */ + unsigned int clockToDataOutMinus2_RoP; /* RoP right of point (measured in ns) */ + + unsigned int minimumCycleTimeAtMaxCasLatancy_LoP; /* LoP left of point (measured in ns) */ + unsigned int minimumCycleTimeAtMaxCasLatancy_RoP; /* RoP right of point (measured in ns) */ + + unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_LoP; /* LoP left of point (measured in ns) */ + unsigned int minimumCycleTimeAtMaxCasLatancyMinus1_RoP; /* RoP right of point (measured in ns) */ + + unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_LoP; /* LoP left of point (measured in ns) */ + unsigned int minimumCycleTimeAtMaxCasLatancyMinus2_RoP; /* RoP right of point (measured in ns) */ + + /* Parameters calculated from + the extracted DIMM information */ + unsigned int size; + unsigned int deviceDensity; /* 16,64,128,256 or 512 Mbit */ + unsigned int numberOfDevices; + uchar drb_size; /* DRAM size in n*64Mbit */ + uchar slot; /* Slot Number this module is inserted in */ + uchar spd_raw_data[128]; /* Content of SPD-EEPROM copied 1:1 */ #ifdef DEBUG - uchar manufactura[8]; /* Content of SPD-EEPROM Byte 64-71 */ - uchar modul_id[18]; /* Content of SPD-EEPROM Byte 73-90 */ - uchar vendor_data[27]; /* Content of SPD-EEPROM Byte 99-125 */ - unsigned long modul_serial_no; /* Content of SPD-EEPROM Byte 95-98 */ - unsigned int manufac_date; /* Content of SPD-EEPROM Byte 93-94 */ - unsigned int modul_revision; /* Content of SPD-EEPROM Byte 91-92 */ - uchar manufac_place; /* Content of SPD-EEPROM Byte 72 */ + uchar manufactura[8]; /* Content of SPD-EEPROM Byte 64-71 */ + uchar modul_id[18]; /* Content of SPD-EEPROM Byte 73-90 */ + uchar vendor_data[27]; /* Content of SPD-EEPROM Byte 99-125 */ + unsigned long modul_serial_no; /* Content of SPD-EEPROM Byte 95-98 */ + unsigned int manufac_date; /* Content of SPD-EEPROM Byte 93-94 */ + unsigned int modul_revision; /* Content of SPD-EEPROM Byte 91-92 */ + uchar manufac_place; /* Content of SPD-EEPROM Byte 72 */ #endif } AUX_MEM_DIMM_INFO; @@ -364,31 +363,31 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) for (i = 0; i < sizeof (dimmInfo->manufactura); i++) { dimmInfo->manufactura[i] = data[64 + i]; } - printf ("\nThis RAM-Module is produced by: %s\n", + printf ("\nThis RAM-Module is produced by: %s\n", dimmInfo->manufactura); /* find Manul-ID of Dimm Module */ for (i = 0; i < sizeof (dimmInfo->modul_id); i++) { dimmInfo->modul_id[i] = data[73 + i]; } - printf ("The Module-ID of this RAM-Module is: %s\n", + printf ("The Module-ID of this RAM-Module is: %s\n", dimmInfo->modul_id); /* find Vendor-Data of Dimm Module */ for (i = 0; i < sizeof (dimmInfo->vendor_data); i++) { dimmInfo->vendor_data[i] = data[99 + i]; } - printf ("Vendor Data of this RAM-Module is: %s\n", + printf ("Vendor Data of this RAM-Module is: %s\n", dimmInfo->vendor_data); /* find modul_serial_no of Dimm Module */ dimmInfo->modul_serial_no = (*((unsigned long *) (&data[95]))); - printf ("Serial No. of this RAM-Module is: %ld (%lx)\n", + printf ("Serial No. of this RAM-Module is: %ld (%lx)\n", dimmInfo->modul_serial_no, dimmInfo->modul_serial_no); /* find Manufac-Data of Dimm Module */ dimmInfo->manufac_date = (*((unsigned int *) (&data[93]))); - printf ("Manufactoring Date of this RAM-Module is: %d.%d\n", data[93], data[94]); /*dimmInfo->manufac_date */ + printf ("Manufactoring Date of this RAM-Module is: %d.%d\n", data[93], data[94]); /*dimmInfo->manufac_date */ /* find modul_revision of Dimm Module */ dimmInfo->modul_revision = (*((unsigned int *) (&data[91]))); @@ -396,7 +395,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) /* find manufac_place of Dimm Module */ dimmInfo->manufac_place = (*((unsigned char *) (&data[72]))); - printf ("manufac_place of this RAM-Module is: %d\n", + printf ("manufac_place of this RAM-Module is: %d\n", dimmInfo->manufac_place); #endif @@ -426,11 +425,11 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) #ifdef DEBUG if (dimmInfo->memoryType == 0) DP (printf - ("Dram_type in slot %d is: SDRAM\n", + ("Dram_type in slot %d is: SDRAM\n", dimmInfo->slot)); if (dimmInfo->memoryType == 1) DP (printf - ("Dram_type in slot %d is: DDRAM\n", + ("Dram_type in slot %d is: DDRAM\n", dimmInfo->slot)); #endif break; @@ -439,7 +438,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) case 3: /* Number Of Row Addresses */ dimmInfo->numOfRowAddresses = data[i]; DP (printf - ("Module Number of row addresses: %d\n", + ("Module Number of row addresses: %d\n", dimmInfo->numOfRowAddresses)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -447,7 +446,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) case 4: /* Number Of Column Addresses */ dimmInfo->numOfColAddresses = data[i]; DP (printf - ("Module Number of col addresses: %d\n", + ("Module Number of col addresses: %d\n", dimmInfo->numOfColAddresses)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -463,7 +462,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) case 6: /* Data Width */ dimmInfo->dataWidth = data[i]; DP (printf - ("Module Data Width: %d\n", + ("Module Data Width: %d\n", dimmInfo->dataWidth)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -518,7 +517,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP = rightOfPoint; DP (printf - ("Minimum Cycle Time At Max CasLatancy: %d.%d [ns]\n", + ("Minimum Cycle Time At Max CasLatancy: %d.%d [ns]\n", leftOfPoint, rightOfPoint)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -533,7 +532,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) dimmInfo->clockToDataOut_LoP = leftOfPoint; dimmInfo->clockToDataOut_RoP = rightOfPoint; DP (printf - ("Clock To Data Out: %d.%2d [ns]\n", + ("Clock To Data Out: %d.%2d [ns]\n", leftOfPoint, rightOfPoint)); /*dimmInfo->clockToDataOut */ break; @@ -543,7 +542,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) case 11: /* Error Check Type */ dimmInfo->errorCheckType = data[i]; DP (printf - ("Error Check Type (0=NONE): %d\n", + ("Error Check Type (0=NONE): %d\n", dimmInfo->errorCheckType)); break; #endif @@ -560,7 +559,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) case 13: /* Sdram Width */ dimmInfo->sdramWidth = data[i]; DP (printf - ("Sdram Width: %d\n", + ("Sdram Width: %d\n", dimmInfo->sdramWidth)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -568,7 +567,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) case 14: /* Error Check Data Width */ dimmInfo->errorCheckDataWidth = data[i]; DP (printf - ("Error Check Data Width: %d\n", + ("Error Check Data Width: %d\n", dimmInfo->errorCheckDataWidth)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -576,7 +575,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) case 15: /* Minimum Clock Delay */ dimmInfo->minClkDelay = data[i]; DP (printf - ("Minimum Clock Delay: %d\n", + ("Minimum Clock Delay: %d\n", dimmInfo->minClkDelay)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -585,7 +584,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) /******-******-******-******* * bit3 | bit2 | bit1 | bit0 * *******-******-******-******* - burst length = * 8 | 4 | 2 | 1 * + burst length = * 8 | 4 | 2 | 1 * ***************************** If for example bit0 and bit2 are set, the burst @@ -594,7 +593,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) dimmInfo->burstLengthSupported = data[i]; #ifdef DEBUG DP (printf - ("Burst Length Supported: ")); + ("Burst Length Supported: ")); if (dimmInfo->burstLengthSupported & 0x01) DP (printf ("1, ")); if (dimmInfo->burstLengthSupported & 0x02) @@ -611,7 +610,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) case 17: /* Number Of Banks On Each Device */ dimmInfo->numOfBanksOnEachDevice = data[i]; DP (printf - ("Number Of Banks On Each Chip: %d\n", + ("Number Of Banks On Each Chip: %d\n", dimmInfo->numOfBanksOnEachDevice)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -622,24 +621,24 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) *******-******-******-******-******-******-******-******* * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * *******-******-******-******-******-******-******-******* - CAS = * TBD | TBD | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * + CAS = * TBD | TBD | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * ********************************************************* SDRAM: *******-******-******-******-******-******-******-******* * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * *******-******-******-******-******-******-******-******* - CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * + CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * ********************************************************/ dimmInfo->suportedCasLatencies = data[i]; #ifdef DEBUG DP (printf - ("Suported Cas Latencies: (CL) ")); + ("Suported Cas Latencies: (CL) ")); if (dimmInfo->memoryType == 0) { /* SDRAM */ for (k = 0; k <= 7; k++) { if (dimmInfo-> suportedCasLatencies & (1 << k)) DP (printf - ("%d, ", + ("%d, ", k + 1)); } @@ -738,7 +737,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) maxCASlatencySupported_RoP = 0; DP (printf - ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", + ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", dimmInfo-> maxCASlatencySupported_LoP, dimmInfo-> @@ -746,7 +745,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) break; case SDRAM: /* CAS latency 1, 2, 3, 4, 5, 6, 7 */ - dimmInfo->maxClSupported_SD = j; /* Cas Latency DDR-RAM Coded */ + dimmInfo->maxClSupported_SD = j; /* Cas Latency DDR-RAM Coded */ DP (printf ("Max. Cas Latencies (SD): %d\n", dimmInfo-> @@ -886,7 +885,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) (" - lower VCC tolerance: 5 Percent \n")); else DP (printf - (" - lower VCC tolerance: 10 Percent \n")); + (" - lower VCC tolerance: 10 Percent \n")); if (dimmInfo->suported5PercentUpperVCC == 1) DP (printf @@ -986,7 +985,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) ("*** 1 clock cycle = %ld 10ps intervalls = %ld.%ld ns****\n", tmemclk, tmemclk / 100, tmemclk % 100)); DP (printf - ("Minimum Row Precharge Time [ns]: %d.%2d = in Clk cycles %d\n", + ("Minimum Row Precharge Time [ns]: %d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -1005,7 +1004,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) (dimmInfo->minRowActiveRowActiveDelay + (tmemclk - 1)) / tmemclk; DP (printf - ("Minimum Row Active -To- Row Active Delay [ns]: %d.%2d = in Clk cycles %d\n", + ("Minimum Row Active -To- Row Active Delay [ns]: %d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -1024,7 +1023,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) (dimmInfo->minRowActiveRowActiveDelay + (tmemclk - 1)) / tmemclk; DP (printf - ("Minimum Ras-To-Cas Delay [ns]: %d.%2d = in Clk cycles %d\n", + ("Minimum Ras-To-Cas Delay [ns]: %d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -1035,7 +1034,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) (NSto10PS (data[i]) + (tmemclk - 1)) / tmemclk; DP (printf - ("Minimum Ras Pulse Width [ns]: %d = in Clk cycles %d\n", + ("Minimum Ras Pulse Width [ns]: %d = in Clk cycles %d\n", dimmInfo->minRasPulseWidth, tras_clocks)); break; @@ -1044,7 +1043,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) case 31: /* Module Bank Density */ dimmInfo->moduleBankDensity = data[i]; DP (printf - ("Module Bank Density: %d\n", + ("Module Bank Density: %d\n", dimmInfo->moduleBankDensity)); #ifdef DEBUG DP (printf @@ -1095,7 +1094,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) dimmInfo->addrAndCommandSetupTime = (leftOfPoint * 100 + rightOfPoint) * sign; DP (printf - ("Address And Command Setup Time [ns]: %d.%d\n", + ("Address And Command Setup Time [ns]: %d.%d\n", sign * leftOfPoint, rightOfPoint)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -1122,7 +1121,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) dimmInfo->addrAndCommandHoldTime = (leftOfPoint * 100 + rightOfPoint) * sign; DP (printf - ("Address And Command Hold Time [ns]: %d.%d\n", + ("Address And Command Hold Time [ns]: %d.%d\n", sign * leftOfPoint, rightOfPoint)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -1149,7 +1148,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) dimmInfo->dataInputSetupTime = (leftOfPoint * 100 + rightOfPoint) * sign; DP (printf - ("Data Input Setup Time [ns]: %d.%d\n", + ("Data Input Setup Time [ns]: %d.%d\n", sign * leftOfPoint, rightOfPoint)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -1176,7 +1175,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) dimmInfo->dataInputHoldTime = (leftOfPoint * 100 + rightOfPoint) * sign; DP (printf - ("Data Input Hold Time [ns]: %d.%d\n\n", + ("Data Input Hold Time [ns]: %d.%d\n\n", sign * leftOfPoint, rightOfPoint)); break; /*------------------------------------------------------------------------------------------------------------------------------*/ @@ -1212,7 +1211,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses)); tmp *= dimmInfo->numOfModuleBanks; tmp *= dimmInfo->sdramWidth; - tmp = tmp >> 24; /* div by 0x4000000 (64M) */ + tmp = tmp >> 24; /* div by 0x4000000 (64M) */ dimmInfo->drb_size = (uchar) tmp; DP (printf ("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size)); @@ -1328,7 +1327,7 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info) DP (printf ("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n", tmp_sdram_mode, tmp_dunit_control_low)); - } else { /* clk sync. bypassed */ + } else { /* clk sync. bypassed */ tmp_dunit_control_low = 0x03000000; /* Read-Data sampled on rising edge of Clk */ tmp_sdram_mode = 0x62; /* CL=2,5 Burstlength = 4 */ @@ -1345,7 +1344,7 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info) DP (printf ("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n", tmp_sdram_mode, tmp_dunit_control_low)); - } else { /* Not sync. */ + } else { /* Not sync. */ tmp_dunit_control_low = 0x3b000000; /* Read-Data sampled on rising edge of Clk */ tmp_sdram_mode = 0x22; /* CL=2 Burstlength = 4 */ @@ -1504,7 +1503,7 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info) /* for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */ { - int l, l1; + int l, l1; i = info->slot; DP (printf @@ -1518,31 +1517,31 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info) GT_REG_WRITE (EXTENDED_DRAM_MODE, 0x0); GT_REG_WRITE (SDRAM_OPERATION, 0x4); while (GTREGREAD (SDRAM_OPERATION) != 0) { - DP (printf + DP (printf ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); } GT_REG_WRITE (SDRAM_MODE, tmp | 0x80); GT_REG_WRITE (SDRAM_OPERATION, 0x3); while (GTREGREAD (SDRAM_OPERATION) != 0) { - DP (printf + DP (printf ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); } l1 = 0; for (l=0;l<200;l++) - l1 += GTREGREAD (SDRAM_OPERATION); + l1 += GTREGREAD (SDRAM_OPERATION); GT_REG_WRITE (SDRAM_MODE, tmp); GT_REG_WRITE (SDRAM_OPERATION, 0x3); while (GTREGREAD (SDRAM_OPERATION) != 0) { - DP (printf + DP (printf ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); } /* switch back to normal operation mode */ GT_REG_WRITE (SDRAM_OPERATION, 0x5); while (GTREGREAD (SDRAM_OPERATION) != 0) { - DP (printf + DP (printf ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n")); } @@ -1677,16 +1676,16 @@ initdram(int board_type) } /* *************************************************************************************** -! * SDRAM INIT * -! * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb * -! * This procedure fits only the Atlantis * -! * * +! * SDRAM INIT * +! * This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb * +! * This procedure fits only the Atlantis * +! * * ! *************************************************************************************** */ /* *************************************************************************************** -! * DFCDL initialize MV643xx Design Considerations * -! * * +! * DFCDL initialize MV643xx Design Considerations * +! * * ! *************************************************************************************** */ int set_dfcdlInit (void) { diff --git a/board/esd/cpci750/u-boot.lds b/board/esd/cpci750/u-boot.lds index 25e16de..1a95755 100644 --- a/board/esd/cpci750/u-boot.lds +++ b/board/esd/cpci750/u-boot.lds @@ -37,11 +37,11 @@ SECTIONS .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } + .rela.text : { *(.rela.text) } .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } .rel.got : { *(.rel.got) } .rela.got : { *(.rela.got) } .rel.ctors : { *(.rel.ctors) } |