Code cleanup.

1 files changed, 1047 insertions, 803 deletions

diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
index d22ffe5..db545ef 100644
--- a/board/esd/cpci750/sdram_init.c
+++ b/board/esd/cpci750/sdram_init.c
@@ -125,8 +125,8 @@ typedef struct sdram_info {
 typedef enum _memoryType {SDRAM, DDR} MEMORY_TYPE;
 
 typedef enum _voltageInterface {TTL_5V_TOLERANT, LVTTL, HSTL_1_5V,
-                                SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN,
-                               } VOLTAGE_INTERFACE;
+				SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN,
+			       } VOLTAGE_INTERFACE;
 
 typedef enum _max_CL_supported_DDR {DDR_CL_1=1, DDR_CL_1_5=2, DDR_CL_2=4, DDR_CL_2_5=8, DDR_CL_3=16, DDR_CL_3_5=32, DDR_CL_FAULT} MAX_CL_SUPPORTED_DDR;
 typedef enum _max_CL_supported_SD {SD_CL_1=1,  SD_CL_2,  SD_CL_3, SD_CL_4, SD_CL_5, SD_CL_6, SD_CL_7, SD_FAULT} MAX_CL_SUPPORTED_SD;
@@ -248,760 +248,974 @@ NSto10PS(unsigned char spd_byte)
 /* This code reads the SPD chip on the sdram and populates
  * the array which is passed in with the relevant information */
 /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
-static int
-check_dimm(uchar slot, AUX_MEM_DIMM_INFO *dimmInfo)
-
+static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
 {
- DECLARE_GLOBAL_DATA_PTR;
+	DECLARE_GLOBAL_DATA_PTR;
 
-     unsigned long spd_checksum;
+	unsigned long spd_checksum;
 
 	uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
 	int ret;
-    	unsigned int        i,j,density = 1,devicesForErrCheck = 0;
+	unsigned int i, j, density = 1, devicesForErrCheck = 0;
+
 #ifdef DEBUG
-    	unsigned int        k;
+	unsigned int k;
 #endif
-    	unsigned int    rightOfPoint = 0,leftOfPoint = 0, mult, div, time_tmp;
-	int                 sign = 1,shift,maskLeftOfPoint,maskRightOfPoint;
+	unsigned int rightOfPoint = 0, leftOfPoint = 0, mult, div, time_tmp;
+	int sign = 1, shift, maskLeftOfPoint, maskRightOfPoint;
 	uchar supp_cal, cal_val;
 	ulong memclk, tmemclk;
 	ulong tmp;
-	uchar trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks;
+	uchar trp_clocks = 0, trcd_clocks, tras_clocks, trrd_clocks;
 	uchar data[128];
 
 	memclk = gd->bus_clk;
- 	tmemclk = 1000000000 / (memclk / 100);  /* in 10 ps units */
+	tmemclk = 1000000000 / (memclk / 100);	/* in 10 ps units */
 
-	memset(data, 0, sizeof(data));
+	memset (data, 0, sizeof (data));
 
 
 	ret = 0;
 
-	DP(puts("before i2c read\n"));
+	DP (puts ("before i2c read\n"));
 
-        ret = i2c_read(addr, 0, 2, data, 128);
+	ret = i2c_read (addr, 0, 2, data, 128);
 
-	DP(puts("after i2c read\n"));
+	DP (puts ("after i2c read\n"));
 
-	if ((data[64] != 'e') || (data[65] != 's') || (data[66] != 'd') || (data[67] != '-') ||
-	    (data[68] != 'g') || (data[69] != 'm') || (data[70] != 'b') || (data[71] != 'h'))
-	    {
-	    ret = -1;
-	    }
+	if ((data[64] != 'e') || (data[65] != 's') || (data[66] != 'd')
+	    || (data[67] != '-') || (data[68] != 'g') || (data[69] != 'm')
+	    || (data[70] != 'b') || (data[71] != 'h')) {
+		ret = -1;
+	}
 
-	if ((ret != 0) && (slot == 0))
-	    {
-	    memset(data, 0, sizeof(data));
-	    data[ 0] = 0x80; data[ 1] = 0x08; data[ 2] = 0x07; data[ 3] = 0x0c;
-	    data[ 4] = 0x09; data[ 5] = 0x01; data[ 6] = 0x48; data[ 7] = 0x00;
-	    data[ 8] = 0x04; data[ 9] = 0x75; data[10] = 0x80; data[11] = 0x02;
-	    data[12] = 0x80; data[13] = 0x10; data[14] = 0x08; data[15] = 0x01;
-	    data[16] = 0x0e; data[17] = 0x04; data[18] = 0x0c; data[19] = 0x01;
-	    data[20] = 0x02; data[21] = 0x20; data[22] = 0x00; data[23] = 0xa0;
-	    data[24] = 0x80; data[25] = 0x00; data[26] = 0x00; data[27] = 0x50;
-	    data[28] = 0x3c; data[29] = 0x50; data[30] = 0x32; data[31] = 0x10;
-	    data[32] = 0xb0; data[33] = 0xb0; data[34] = 0x60; data[35] = 0x60;
-	    data[64] = 'e' ; data[65] = 's' ; data[66] = 'd' ; data[67] = '-' ;
-	    data[68] = 'g' ; data[69] = 'm' ; data[70] = 'b' ; data[71] = 'h' ;
-            ret = 0;
-	    }
+	if ((ret != 0) && (slot == 0)) {
+		memset (data, 0, sizeof (data));
+		data[0] = 0x80;
+		data[1] = 0x08;
+		data[2] = 0x07;
+		data[3] = 0x0c;
+		data[4] = 0x09;
+		data[5] = 0x01;
+		data[6] = 0x48;
+		data[7] = 0x00;
+		data[8] = 0x04;
+		data[9] = 0x75;
+		data[10] = 0x80;
+		data[11] = 0x02;
+		data[12] = 0x80;
+		data[13] = 0x10;
+		data[14] = 0x08;
+		data[15] = 0x01;
+		data[16] = 0x0e;
+		data[17] = 0x04;
+		data[18] = 0x0c;
+		data[19] = 0x01;
+		data[20] = 0x02;
+		data[21] = 0x20;
+		data[22] = 0x00;
+		data[23] = 0xa0;
+		data[24] = 0x80;
+		data[25] = 0x00;
+		data[26] = 0x00;
+		data[27] = 0x50;
+		data[28] = 0x3c;
+		data[29] = 0x50;
+		data[30] = 0x32;
+		data[31] = 0x10;
+		data[32] = 0xb0;
+		data[33] = 0xb0;
+		data[34] = 0x60;
+		data[35] = 0x60;
+		data[64] = 'e';
+		data[65] = 's';
+		data[66] = 'd';
+		data[67] = '-';
+		data[68] = 'g';
+		data[69] = 'm';
+		data[70] = 'b';
+		data[71] = 'h';
+		ret = 0;
+	}
 
 	/* zero all the values */
-	memset(dimmInfo, 0, sizeof(*dimmInfo));
+	memset (dimmInfo, 0, sizeof (*dimmInfo));
 
-	/* copy the SPD content 1:1 into the dimmInfo structure*/
-    	for(i = 0 ; i <= 127 ; i++)
-    	{
-	  dimmInfo->spd_raw_data[i] = data[i];
-    	}
+	/* copy the SPD content 1:1 into the dimmInfo structure */
+	for (i = 0; i <= 127; i++) {
+		dimmInfo->spd_raw_data[i] = data[i];
+	}
 
 	if (ret) {
-		DP(printf("No DIMM in slot %d [err = %x]\n", slot, ret));
+		DP (printf ("No DIMM in slot %d [err = %x]\n", slot, ret));
 		return 0;
-	}
-	else
-	dimmInfo->slot = slot;		/* start to fill up dimminfo for this "slot" */
+	} else
+		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */
 
 #ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
 
-    for(i = 0 ; i <= 127 ; i++)
-    {
-	printf("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i], data[i]);
-    }
+	for (i = 0; i <= 127; i++) {
+		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
+			data[i]);
+	}
 
 #endif
 #ifdef DEBUG
-/* find Manufactura of Dimm Module */
-    for(i = 0 ; i < sizeof(dimmInfo->manufactura) ; i++)
-    {
-	dimmInfo->manufactura[i] = data[64+i];
-    }
-    printf("\nThis RAM-Module is produced by: 		%s\n", dimmInfo->manufactura);
+	/* find Manufacturer of Dimm Module */
+	for (i = 0; i < sizeof (dimmInfo->manufactura); i++) {
+		dimmInfo->manufactura[i] = data[64 + i];
+	}
+	printf ("\nThis RAM-Module is produced by: 		%s\n",
+		dimmInfo->manufactura);
 
-/* find Manul-ID of Dimm Module */
-    for(i = 0 ; i < sizeof(dimmInfo->modul_id) ; i++)
-    {
-	dimmInfo->modul_id[i] = data[73+i];
-    }
-    printf("The Module-ID of this RAM-Module is: 		%s\n", dimmInfo->modul_id);
+	/* find Manul-ID of Dimm Module */
+	for (i = 0; i < sizeof (dimmInfo->modul_id); i++) {
+		dimmInfo->modul_id[i] = data[73 + i];
+	}
+	printf ("The Module-ID of this RAM-Module is: 		%s\n",
+		dimmInfo->modul_id);
 
-/* find Vendor-Data of Dimm Module */
-    for(i = 0 ; i < sizeof(dimmInfo->vendor_data) ; i++)
-    {
-	dimmInfo->vendor_data[i] = data[99+i];
-    }
-    printf("Vendor Data of this RAM-Module is: 		%s\n", dimmInfo->vendor_data);
+	/* find Vendor-Data of Dimm Module */
+	for (i = 0; i < sizeof (dimmInfo->vendor_data); i++) {
+		dimmInfo->vendor_data[i] = data[99 + i];
+	}
+	printf ("Vendor Data of this RAM-Module is: 		%s\n",
+		dimmInfo->vendor_data);
 
-/* find modul_serial_no of Dimm Module */
-    dimmInfo->modul_serial_no = (*((unsigned long *)(&data[95])));
-    printf("Serial No. of this RAM-Module is: 		%ld (%lx)\n", dimmInfo->modul_serial_no, dimmInfo->modul_serial_no);
+	/* find modul_serial_no of Dimm Module */
+	dimmInfo->modul_serial_no = (*((unsigned long *) (&data[95])));
+	printf ("Serial No. of this RAM-Module is: 		%ld (%lx)\n",
+		dimmInfo->modul_serial_no, dimmInfo->modul_serial_no);
 
-/* find Manufac-Data of Dimm Module */
-    dimmInfo->manufac_date = (*((unsigned int *)(&data[93])));
-    printf("Manufactoring Date of this RAM-Module is: 	%d.%d\n", data[93], data [94]); /*dimmInfo->manufac_date*/
+	/* find Manufac-Data of Dimm Module */
+	dimmInfo->manufac_date = (*((unsigned int *) (&data[93])));
+	printf ("Manufactoring Date of this RAM-Module is: 	%d.%d\n", data[93], data[94]);	/*dimmInfo->manufac_date */
 
-/* find modul_revision of Dimm Module */
-    dimmInfo->modul_revision = (*((unsigned int *)(&data[91])));
-    printf("Module Revision of this RAM-Module is: 		%d.%d\n", data[91], data [92]); /* dimmInfo->modul_revision*/
+	/* find modul_revision of Dimm Module */
+	dimmInfo->modul_revision = (*((unsigned int *) (&data[91])));
+	printf ("Module Revision of this RAM-Module is: 		%d.%d\n", data[91], data[92]);	/* dimmInfo->modul_revision */
 
-/* find manufac_place of Dimm Module */
-    dimmInfo->manufac_place = (*((unsigned char *)(&data[72])));
-    printf("manufac_place of this RAM-Module is: 		%d\n", dimmInfo->manufac_place);
+	/* find manufac_place of Dimm Module */
+	dimmInfo->manufac_place = (*((unsigned char *) (&data[72])));
+	printf ("manufac_place of this RAM-Module is: 		%d\n",
+		dimmInfo->manufac_place);
 
 #endif
 /*------------------------------------------------------------------------------------------------------------------------------*/
 /* calculate SPD checksum */
 /*------------------------------------------------------------------------------------------------------------------------------*/
-    spd_checksum = 0;
-#if 0 /* test-only */
-    for(i = 0 ; i <= 62 ; i++)
-    {
-     spd_checksum += data[i];
-    }
+	spd_checksum = 0;
+#if 0				/* test-only */
+	for (i = 0; i <= 62; i++) {
+		spd_checksum += data[i];
+	}
 
-    if ((spd_checksum & 0xff) != data[63])
-    {
-    	printf("### Error in SPD Checksum !!! Is_value: %2x should value %2x\n", (unsigned int)(spd_checksum & 0xff), data[63]);
-        	hang();
-    }
+	if ((spd_checksum & 0xff) != data[63]) {
+		printf ("### Error in SPD Checksum !!! Is_value: %2x should value %2x\n", (unsigned int) (spd_checksum & 0xff), data[63]);
+		hang ();
+	}
 
-    else
-    	printf("SPD Checksum ok!\n");
+	else
+		printf ("SPD Checksum ok!\n");
 #endif /* test-only */
 
 /*------------------------------------------------------------------------------------------------------------------------------*/
-    for(i = 2 ; i <= 35 ; i++)
-    {
-        switch(i)
-        {
-        case 2:  /* Memory type (DDR / SDRAM) */
-            dimmInfo->memoryType = (data[i] == 0x7)? DDR:SDRAM;
-	#ifdef DEBUG
-	if (dimmInfo->memoryType == 0)
-		DP(printf("Dram_type in slot %d is: 			SDRAM\n", dimmInfo->slot));
-	if (dimmInfo->memoryType == 1)
-		DP(printf("Dram_type in slot %d is: 			DDRAM\n", dimmInfo->slot));
-	#endif
-            break;
+	for (i = 2; i <= 35; i++) {
+		switch (i) {
+		case 2:	/* Memory type (DDR / SDRAM) */
+			dimmInfo->memoryType = (data[i] == 0x7) ? DDR : SDRAM;
+#ifdef DEBUG
+			if (dimmInfo->memoryType == 0)
+				DP (printf
+				    ("Dram_type in slot %d is: 			SDRAM\n",
+				     dimmInfo->slot));
+			if (dimmInfo->memoryType == 1)
+				DP (printf
+				    ("Dram_type in slot %d is: 			DDRAM\n",
+				     dimmInfo->slot));
+#endif
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 3:  /* Number Of Row Addresses */
-            dimmInfo->numOfRowAddresses = data[i];
-	    DP(printf("Module Number of row addresses: 		%d\n", dimmInfo->numOfRowAddresses));
-            break;
+		case 3:	/* Number Of Row Addresses */
+			dimmInfo->numOfRowAddresses = data[i];
+			DP (printf
+			    ("Module Number of row addresses: 		%d\n",
+			     dimmInfo->numOfRowAddresses));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 4:  /* Number Of Column Addresses */
-            dimmInfo->numOfColAddresses = data[i];
-	    DP(printf("Module Number of col addresses: 		%d\n", dimmInfo->numOfColAddresses));
-            break;
+		case 4:	/* Number Of Column Addresses */
+			dimmInfo->numOfColAddresses = data[i];
+			DP (printf
+			    ("Module Number of col addresses: 		%d\n",
+			     dimmInfo->numOfColAddresses));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 5:  /* Number Of Module Banks */
-            dimmInfo->numOfModuleBanks = data[i];
-	    DP(printf("Number of Banks on Mod. : 				%d\n", dimmInfo->numOfModuleBanks));
-            break;
+		case 5:	/* Number Of Module Banks */
+			dimmInfo->numOfModuleBanks = data[i];
+			DP (printf
+			    ("Number of Banks on Mod. : 				%d\n",
+			     dimmInfo->numOfModuleBanks));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 6:  /* Data Width */
-            dimmInfo->dataWidth = data[i];
-	    DP(printf("Module Data Width: 				%d\n", dimmInfo->dataWidth));
-            break;
+		case 6:	/* Data Width */
+			dimmInfo->dataWidth = data[i];
+			DP (printf
+			    ("Module Data Width: 				%d\n",
+			     dimmInfo->dataWidth));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 8:  /* Voltage Interface */
-            switch(data[i])
-            {
-            case 0x0:
-                dimmInfo->voltageInterface = TTL_5V_TOLERANT;
-		DP(printf("Module is 					TTL_5V_TOLERANT\n"));
-                break;
-            case 0x1:
-                dimmInfo->voltageInterface = LVTTL;
-		DP(printf("Module is 					LVTTL\n"));
-                break;
-            case 0x2:
-                dimmInfo->voltageInterface = HSTL_1_5V;
-	    DP(printf("Module is 					TTL_5V_TOLERANT\n"));
-                break;
-            case 0x3:
-                dimmInfo->voltageInterface = SSTL_3_3V;
-		DP(printf("Module is 					HSTL_1_5V\n"));
-                break;
-            case 0x4:
-                dimmInfo->voltageInterface = SSTL_2_5V;
-		DP(printf("Module is 					SSTL_2_5V\n"));
-                break;
-            default:
-                dimmInfo->voltageInterface = VOLTAGE_UNKNOWN;
-		DP(printf("Module is 					VOLTAGE_UNKNOWN\n"));
-                break;
-            }
-            break;
+		case 8:	/* Voltage Interface */
+			switch (data[i]) {
+			case 0x0:
+				dimmInfo->voltageInterface = TTL_5V_TOLERANT;
+				DP (printf
+				    ("Module is 					TTL_5V_TOLERANT\n"));
+				break;
+			case 0x1:
+				dimmInfo->voltageInterface = LVTTL;
+				DP (printf
+				    ("Module is 					LVTTL\n"));
+				break;
+			case 0x2:
+				dimmInfo->voltageInterface = HSTL_1_5V;
+				DP (printf
+				    ("Module is 					TTL_5V_TOLERANT\n"));
+				break;
+			case 0x3:
+				dimmInfo->voltageInterface = SSTL_3_3V;
+				DP (printf
+				    ("Module is 					HSTL_1_5V\n"));
+				break;
+			case 0x4:
+				dimmInfo->voltageInterface = SSTL_2_5V;
+				DP (printf
+				    ("Module is 					SSTL_2_5V\n"));
+				break;
+			default:
+				dimmInfo->voltageInterface = VOLTAGE_UNKNOWN;
+				DP (printf
+				    ("Module is 					VOLTAGE_UNKNOWN\n"));
+				break;
+			}
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 9:  /* Minimum Cycle Time At Max CasLatancy */
-            shift = (dimmInfo->memoryType == DDR)? 4:2;
-            mult = (dimmInfo->memoryType == DDR)? 10:25;
-            maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc;
-            maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03;
-            leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-            rightOfPoint = (data[i] & maskRightOfPoint)* mult;
-            dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP = leftOfPoint;
-            dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP = rightOfPoint;
-	    DP(printf("Minimum Cycle Time At Max CasLatancy: 		%d.%d [ns]\n",leftOfPoint, rightOfPoint));
-            break;
+		case 9:	/* Minimum Cycle Time At Max CasLatancy */
+			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
+			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
+			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
+			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP =
+				leftOfPoint;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP =
+				rightOfPoint;
+			DP (printf
+			    ("Minimum Cycle Time At Max CasLatancy: 		%d.%d [ns]\n",
+			     leftOfPoint, rightOfPoint));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 10: /* Clock To Data Out */
-            div = (dimmInfo->memoryType == DDR)? 100:10;
-            time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
-            leftOfPoint     = time_tmp / div;
-            rightOfPoint    = time_tmp % div;
-            dimmInfo->clockToDataOut_LoP = leftOfPoint;
-            dimmInfo->clockToDataOut_RoP = rightOfPoint;
-	    DP(printf("Clock To Data Out: 				%d.%2d [ns]\n",leftOfPoint,  rightOfPoint ));
-	    /*dimmInfo->clockToDataOut*/
-            break;
+		case 10:	/* Clock To Data Out */
+			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
+			time_tmp =
+				(((data[i] & 0xf0) >> 4) * 10) +
+				((data[i] & 0x0f));
+			leftOfPoint = time_tmp / div;
+			rightOfPoint = time_tmp % div;
+			dimmInfo->clockToDataOut_LoP = leftOfPoint;
+			dimmInfo->clockToDataOut_RoP = rightOfPoint;
+			DP (printf
+			    ("Clock To Data Out: 				%d.%2d [ns]\n",
+			     leftOfPoint, rightOfPoint));
+			/*dimmInfo->clockToDataOut */
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
 #ifdef CONFIG_ECC
-        case 11: /* Error Check Type */
-            dimmInfo->errorCheckType = data[i];
-	DP(printf("Error Check Type (0=NONE): 			%d\n", dimmInfo->errorCheckType));
-            break;
+		case 11:	/* Error Check Type */
+			dimmInfo->errorCheckType = data[i];
+			DP (printf
+			    ("Error Check Type (0=NONE): 			%d\n",
+			     dimmInfo->errorCheckType));
+			break;
 #endif
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 12: /* Refresh Interval */
-            dimmInfo->RefreshInterval = data[i];
-	DP(printf("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n", dimmInfo->RefreshInterval));
-            break;
+		case 12:	/* Refresh Interval */
+			dimmInfo->RefreshInterval = data[i];
+			DP (printf
+			    ("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n",
+			     dimmInfo->RefreshInterval));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 13: /* Sdram Width */
-            dimmInfo->sdramWidth = data[i];
-	DP(printf("Sdram Width: 					%d\n", dimmInfo->sdramWidth));
-            break;
+		case 13:	/* Sdram Width */
+			dimmInfo->sdramWidth = data[i];
+			DP (printf
+			    ("Sdram Width: 					%d\n",
+			     dimmInfo->sdramWidth));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 14: /* Error Check Data Width */
-            dimmInfo->errorCheckDataWidth = data[i];
-	DP(printf("Error Check Data Width: 			%d\n", dimmInfo->errorCheckDataWidth));
-            break;
+		case 14:	/* Error Check Data Width */
+			dimmInfo->errorCheckDataWidth = data[i];
+			DP (printf
+			    ("Error Check Data Width: 			%d\n",
+			     dimmInfo->errorCheckDataWidth));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 15: /* Minimum Clock Delay */
-            dimmInfo->minClkDelay = data[i];
-	DP(printf("Minimum Clock Delay: 				%d\n", dimmInfo->minClkDelay));
-            break;
+		case 15:	/* Minimum Clock Delay */
+			dimmInfo->minClkDelay = data[i];
+			DP (printf
+			    ("Minimum Clock Delay: 				%d\n",
+			     dimmInfo->minClkDelay));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 16: /* Burst Length Supported */
-                           /******-******-******-*******
-                           * bit3 | bit2 | bit1 | bit0 *
-                           *******-******-******-*******
-            burst length = *  8   |  4   |   2  |   1  *
-                           *****************************
+		case 16:	/* Burst Length Supported */
+			   /******-******-******-*******
+			   * bit3 | bit2 | bit1 | bit0 *
+			   *******-******-******-*******
+	    burst length = *  8   |  4   |   2  |   1  *
+			   *****************************
 
-            If for example bit0 and bit2 are set, the burst
-            length supported are 1 and 4. */
+	    If for example bit0 and bit2 are set, the burst
+	    length supported are 1 and 4. */
 
-            dimmInfo->burstLengthSupported = data[i];
+			dimmInfo->burstLengthSupported = data[i];
 #ifdef DEBUG
-	DP(printf("Burst Length Supported: 			"));
-	if (dimmInfo->burstLengthSupported & 0x01)
-		DP(printf("1, "));
-	if (dimmInfo->burstLengthSupported & 0x02)
-		DP(printf("2, "));
-	if (dimmInfo->burstLengthSupported & 0x04)
-		DP(printf("4, "));
-	if (dimmInfo->burstLengthSupported & 0x08)
-		DP(printf("8, "));
-	DP(printf(" Bit \n"));
+			DP (printf
+			    ("Burst Length Supported: 			"));
+			if (dimmInfo->burstLengthSupported & 0x01)
+				DP (printf ("1, "));
+			if (dimmInfo->burstLengthSupported & 0x02)
+				DP (printf ("2, "));
+			if (dimmInfo->burstLengthSupported & 0x04)
+				DP (printf ("4, "));
+			if (dimmInfo->burstLengthSupported & 0x08)
+				DP (printf ("8, "));
+			DP (printf (" Bit \n"));
 #endif
-            break;
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 17: /* Number Of Banks On Each Device */
-            dimmInfo->numOfBanksOnEachDevice = data[i];
-	    DP(printf("Number Of Banks On Each Chip: 			%d\n", dimmInfo->numOfBanksOnEachDevice));
-            break;
+		case 17:	/* Number Of Banks On Each Device */
+			dimmInfo->numOfBanksOnEachDevice = data[i];
+			DP (printf
+			    ("Number Of Banks On Each Chip: 			%d\n",
+			     dimmInfo->numOfBanksOnEachDevice));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 18: /* Suported Cas Latencies */
-
-	  /*     DDR:
-                   *******-******-******-******-******-******-******-*******
-		   * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
-		   *******-******-******-******-******-******-******-*******
-	   CAS =   * TBD  | TBD  | 3.5  |   3  | 2.5  |  2   | 1.5  |   1  *
-	           *********************************************************
-	   SDRAM:
-	           *******-******-******-******-******-******-******-*******
-		   * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
-		   *******-******-******-******-******-******-******-*******
-	   CAS =   * TBD  |  7   |  6   |  5   |  4   |  3   |   2  |   1  *
-	           ********************************************************/
-	  dimmInfo->suportedCasLatencies = data[i];
+		case 18:	/* Suported Cas Latencies */
+
+			/*     DDR:
+			 *******-******-******-******-******-******-******-*******
+			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+			 *******-******-******-******-******-******-******-*******
+			 CAS =   * TBD  | TBD  | 3.5  |   3  | 2.5  |  2   | 1.5  |   1  *
+			 *********************************************************
+			 SDRAM:
+			 *******-******-******-******-******-******-******-*******
+			 * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
+			 *******-******-******-******-******-******-******-*******
+			 CAS =   * TBD  |  7   |  6   |  5   |  4   |  3   |   2  |   1  *
+			 ********************************************************/
+			dimmInfo->suportedCasLatencies = data[i];
 #ifdef DEBUG
-	  DP(printf("Suported Cas Latencies: (CL) 			"));
-	  if (dimmInfo->memoryType == 0)		/* SDRAM*/
-	    {
-	      for (k = 0; k <=7; k++)
-		{
-		  if (dimmInfo->suportedCasLatencies & (1 << k))
-		    DP(printf("%d, 			", k+1));
-		}
+			DP (printf
+			    ("Suported Cas Latencies: (CL) 			"));
+			if (dimmInfo->memoryType == 0) {	/* SDRAM */
+				for (k = 0; k <= 7; k++) {
+					if (dimmInfo->
+					    suportedCasLatencies & (1 << k))
+						DP (printf
+						    ("%d, 			",
+						     k + 1));
+				}
+
+			} else {	/* DDR-RAM */
+
+				if (dimmInfo->suportedCasLatencies & 1)
+					DP (printf ("1, "));
+				if (dimmInfo->suportedCasLatencies & 2)
+					DP (printf ("1.5, "));
+				if (dimmInfo->suportedCasLatencies & 4)
+					DP (printf ("2, "));
+				if (dimmInfo->suportedCasLatencies & 8)
+					DP (printf ("2.5, "));
+				if (dimmInfo->suportedCasLatencies & 16)
+					DP (printf ("3, "));
+				if (dimmInfo->suportedCasLatencies & 32)
+					DP (printf ("3.5, "));
 
-	    }
-	  else					/* DDR-RAM*/
-	    {
-	      if (dimmInfo->suportedCasLatencies & 1)
-		DP(printf("1, "));
-	      if (dimmInfo->suportedCasLatencies & 2)
-		DP(printf("1.5, "));
-	      if (dimmInfo->suportedCasLatencies & 4)
-		DP(printf("2, "));
-	      if (dimmInfo->suportedCasLatencies & 8)
-		DP(printf("2.5, "));
-	      if (dimmInfo->suportedCasLatencies & 16)
-		DP(printf("3, "));
-	      if (dimmInfo->suportedCasLatencies & 32)
-		DP(printf("3.5, "));
-
-	    }
-	  DP(printf("\n"));
+			}
+			DP (printf ("\n"));
 #endif
-	  /* Calculating MAX CAS latency */
-	  for(j = 7 ; j > 0 ; j--)
-	    {
-	      if(((dimmInfo->suportedCasLatencies >> j) & 0x1) == 1)
-		{
-		  switch(dimmInfo->memoryType)
-		    {
-		    case DDR:
-		      /* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */
-		      switch (j)
-			{
-			case 7:
-			  DP(printf("Max. Cas Latencies (DDR): 			ERROR !!!\n"));
-			  dimmInfo->maxClSupported_DDR = DDR_CL_FAULT;
-			  hang();
-			  break;
-			case 6:
-			  DP(printf("Max. Cas Latencies (DDR): 			ERROR !!!\n"));
-			  dimmInfo->maxClSupported_DDR = DDR_CL_FAULT;
-			  hang();
-			  break;
-			case 5:
-			  DP(printf("Max. Cas Latencies (DDR): 			3.5 clk's\n"));
-			  dimmInfo->maxClSupported_DDR = DDR_CL_3_5;
-			  break;
-			case 4:
-			  DP(printf("Max. Cas Latencies (DDR): 			3 clk's \n"));
-			  dimmInfo->maxClSupported_DDR = DDR_CL_3;
-			  break;
-			case 3:
-			  DP(printf("Max. Cas Latencies (DDR): 			2.5 clk's \n"));
-			  dimmInfo->maxClSupported_DDR = DDR_CL_2_5;
-			  break;
-			case 2:
-			  DP(printf("Max. Cas Latencies (DDR): 			2 clk's \n"));
-			  dimmInfo->maxClSupported_DDR = DDR_CL_2;
-			  break;
-			case 1:
-			  DP(printf("Max. Cas Latencies (DDR): 			1.5 clk's \n"));
-			  dimmInfo->maxClSupported_DDR = DDR_CL_1_5;
-			  break;
+			/* Calculating MAX CAS latency */
+			for (j = 7; j > 0; j--) {
+				if (((dimmInfo->
+				      suportedCasLatencies >> j) & 0x1) ==
+				    1) {
+					switch (dimmInfo->memoryType) {
+					case DDR:
+						/* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */
+						switch (j) {
+						case 7:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			ERROR !!!\n"));
+							dimmInfo->
+								maxClSupported_DDR
+								=
+								DDR_CL_FAULT;
+							hang ();
+							break;
+						case 6:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			ERROR !!!\n"));
+							dimmInfo->
+								maxClSupported_DDR
+								=
+								DDR_CL_FAULT;
+							hang ();
+							break;
+						case 5:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			3.5 clk's\n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_3_5;
+							break;
+						case 4:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			3 clk's \n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_3;
+							break;
+						case 3:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			2.5 clk's \n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_2_5;
+							break;
+						case 2:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			2 clk's \n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_2;
+							break;
+						case 1:
+							DP (printf
+							    ("Max. Cas Latencies (DDR): 			1.5 clk's \n"));
+							dimmInfo->
+								maxClSupported_DDR
+								= DDR_CL_1_5;
+							break;
+						}
+						dimmInfo->
+							maxCASlatencySupported_LoP
+							=
+							1 +
+							(int) (5 * j / 10);
+						if (((5 * j) % 10) != 0)
+							dimmInfo->
+								maxCASlatencySupported_RoP
+								= 5;
+						else
+							dimmInfo->
+								maxCASlatencySupported_RoP
+								= 0;
+						DP (printf
+						    ("Max. Cas Latencies (DDR LoP.RoP Notation): 	%d.%d \n",
+						     dimmInfo->
+						     maxCASlatencySupported_LoP,
+						     dimmInfo->
+						     maxCASlatencySupported_RoP));
+						break;
+					case SDRAM:
+						/* CAS latency 1, 2, 3, 4, 5, 6, 7 */
+						dimmInfo->maxClSupported_SD = j;	/*  Cas Latency DDR-RAM Coded                   */
+						DP (printf
+						    ("Max. Cas Latencies (SD): %d\n",
+						     dimmInfo->
+						     maxClSupported_SD));
+						dimmInfo->
+							maxCASlatencySupported_LoP
+							= j;
+						dimmInfo->
+							maxCASlatencySupported_RoP
+							= 0;
+						DP (printf
+						    ("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n",
+						     dimmInfo->
+						     maxCASlatencySupported_LoP,
+						     dimmInfo->
+						     maxCASlatencySupported_RoP));
+						break;
+					}
+					break;
+				}
 			}
-		      dimmInfo->maxCASlatencySupported_LoP = 1 + (int) (5 * j /10);
-		      if (((5*j) % 10) != 0)
-			dimmInfo->maxCASlatencySupported_RoP =  5;
-		      else
-			dimmInfo->maxCASlatencySupported_RoP =  0;
-		      DP(printf("Max. Cas Latencies (DDR LoP.RoP Notation): 	%d.%d \n", dimmInfo->maxCASlatencySupported_LoP, dimmInfo->maxCASlatencySupported_RoP));
-		      break;
-		    case SDRAM:
-		      /* CAS latency 1, 2, 3, 4, 5, 6, 7 */
-		      dimmInfo->maxClSupported_SD = j;			/*  Cas Latency DDR-RAM Coded			*/
-		      DP(printf("Max. Cas Latencies (SD): %d\n", dimmInfo->maxClSupported_SD));
-		      dimmInfo->maxCASlatencySupported_LoP =  j ;
-		      dimmInfo->maxCASlatencySupported_RoP =  0;
-		      DP(printf("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", dimmInfo->maxCASlatencySupported_LoP, dimmInfo->maxCASlatencySupported_RoP));
-		      break;
-		    }
-		  break;
-		}
-            }
-	  break;
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 21: /* Buffered Address And Control Inputs */
-            DP(printf("\nModul Attributes (SPD Byte 21): \n"));
-            dimmInfo->bufferedAddrAndControlInputs = data[i] & BIT0;
-            dimmInfo->registeredAddrAndControlInputs = (data[i] & BIT1) >> 1;
-            dimmInfo->onCardPLL = (data[i] & BIT2) >> 2;
-            dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3;
-            dimmInfo->registeredDQMBinputs = (data[i] & BIT4) >> 4;
-            dimmInfo->differentialClockInput = (data[i] & BIT5) >> 5;
-            dimmInfo->redundantRowAddressing = (data[i] & BIT6) >> 6;
+		case 21:	/* Buffered Address And Control Inputs */
+			DP (printf ("\nModul Attributes (SPD Byte 21): \n"));
+			dimmInfo->bufferedAddrAndControlInputs =
+				data[i] & BIT0;
+			dimmInfo->registeredAddrAndControlInputs =
+				(data[i] & BIT1) >> 1;
+			dimmInfo->onCardPLL = (data[i] & BIT2) >> 2;
+			dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3;
+			dimmInfo->registeredDQMBinputs =
+				(data[i] & BIT4) >> 4;
+			dimmInfo->differentialClockInput =
+				(data[i] & BIT5) >> 5;
+			dimmInfo->redundantRowAddressing =
+				(data[i] & BIT6) >> 6;
 #ifdef DEBUG
-            if (dimmInfo->bufferedAddrAndControlInputs == 1)
- 	           DP(printf(" - Buffered Address/Control Input:		Yes \n"));
-            else
- 	           DP(printf(" - Buffered Address/Control Input:		No \n"));
-
-            if (dimmInfo->registeredAddrAndControlInputs == 1)
- 	           DP(printf(" - Registered Address/Control Input:		Yes \n"));
-            else
- 	           DP(printf(" - Registered Address/Control Input:		No \n"));
-
-            if (dimmInfo->onCardPLL == 1)
- 	           DP(printf(" - On-Card PLL (clock):				Yes \n"));
-            else
- 	           DP(printf(" - On-Card PLL (clock):				No \n"));
-
-            if (dimmInfo->bufferedDQMBinputs == 1)
- 	           DP(printf(" - Bufferd DQMB Inputs:				Yes \n"));
-            else
- 	           DP(printf(" - Bufferd DQMB Inputs:				No \n"));
-
-            if (dimmInfo->registeredDQMBinputs == 1)
- 	           DP(printf(" - Registered DQMB Inputs:			Yes \n"));
-            else
- 	           DP(printf(" - Registered DQMB Inputs:			No \n"));
-
-            if (dimmInfo->differentialClockInput == 1)
- 	           DP(printf(" - Differential Clock Input:			Yes \n"));
-            else
- 	           DP(printf(" - Differential Clock Input:			No \n"));
-
-            if (dimmInfo->redundantRowAddressing == 1)
- 	           DP(printf(" - redundant Row Addressing:			Yes \n"));
-            else
- 	           DP(printf(" - redundant Row Addressing:			No \n"));
+			if (dimmInfo->bufferedAddrAndControlInputs == 1)
+				DP (printf
+				    (" - Buffered Address/Control Input:		Yes \n"));
+			else
+				DP (printf
+				    (" - Buffered Address/Control Input:		No \n"));
+
+			if (dimmInfo->registeredAddrAndControlInputs == 1)
+				DP (printf
+				    (" - Registered Address/Control Input:		Yes \n"));
+			else
+				DP (printf
+				    (" - Registered Address/Control Input:		No \n"));
+
+			if (dimmInfo->onCardPLL == 1)
+				DP (printf
+				    (" - On-Card PLL (clock):				Yes \n"));
+			else
+				DP (printf
+				    (" - On-Card PLL (clock):				No \n"));
+
+			if (dimmInfo->bufferedDQMBinputs == 1)
+				DP (printf
+				    (" - Bufferd DQMB Inputs:				Yes \n"));
+			else
+				DP (printf
+				    (" - Bufferd DQMB Inputs:				No \n"));
+
+			if (dimmInfo->registeredDQMBinputs == 1)
+				DP (printf
+				    (" - Registered DQMB Inputs:			Yes \n"));
+			else
+				DP (printf
+				    (" - Registered DQMB Inputs:			No \n"));
+
+			if (dimmInfo->differentialClockInput == 1)
+				DP (printf
+				    (" - Differential Clock Input:			Yes \n"));
+			else
+				DP (printf
+				    (" - Differential Clock Input:			No \n"));
+
+			if (dimmInfo->redundantRowAddressing == 1)
+				DP (printf
+				    (" - redundant Row Addressing:			Yes \n"));
+			else
+				DP (printf
+				    (" - redundant Row Addressing:			No \n"));
 
 #endif
-            break;
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 22: /* Suported AutoPreCharge */
-            DP(printf("\nModul Attributes (SPD Byte 22): \n"));
-            dimmInfo->suportedEarlyRasPreCharge= data[i] & BIT0;
-            dimmInfo->suportedAutoPreCharge = (data[i] & BIT1) >> 1;
-            dimmInfo->suportedPreChargeAll = (data[i] & BIT2) >> 2;
-            dimmInfo->suportedWrite1ReadBurst= (data[i] & BIT3) >> 3;
-            dimmInfo->suported5PercentLowVCC= (data[i] & BIT4) >> 4;
-            dimmInfo->suported5PercentUpperVCC= (data[i] & BIT5) >> 5;
+		case 22:	/* Suported AutoPreCharge */
+			DP (printf ("\nModul Attributes (SPD Byte 22): \n"));
+			dimmInfo->suportedEarlyRasPreCharge = data[i] & BIT0;
+			dimmInfo->suportedAutoPreCharge =
+				(data[i] & BIT1) >> 1;
+			dimmInfo->suportedPreChargeAll =
+				(data[i] & BIT2) >> 2;
+			dimmInfo->suportedWrite1ReadBurst =
+				(data[i] & BIT3) >> 3;
+			dimmInfo->suported5PercentLowVCC =
+				(data[i] & BIT4) >> 4;
+			dimmInfo->suported5PercentUpperVCC =
+				(data[i] & BIT5) >> 5;
 #ifdef DEBUG
-            if (dimmInfo->suportedEarlyRasPreCharge == 1)
- 	           DP(printf(" - Early Ras Precharge:			Yes \n"));
-            else
- 	           DP(printf(" -  Early Ras Precharge:			No \n"));
-
-            if (dimmInfo->suportedAutoPreCharge == 1)
- 	           DP(printf(" - AutoPreCharge:				Yes \n"));
-            else
- 	           DP(printf(" -  AutoPreCharge:				No \n"));
-
-            if (dimmInfo->suportedPreChargeAll == 1)
- 	           DP(printf(" - Precharge All:				Yes \n"));
-            else
- 	           DP(printf(" -  Precharge All:				No \n"));
-
-            if (dimmInfo->suportedWrite1ReadBurst == 1)
- 	           DP(printf(" - Write 1/ReadBurst:				Yes \n"));
-            else
- 	           DP(printf(" -  Write 1/ReadBurst:				No \n"));
-
-            if (dimmInfo->suported5PercentLowVCC == 1)
- 	           DP(printf(" - lower VCC tolerance:			5 Percent \n"));
-            else
- 	           DP(printf("  - lower VCC tolerance:			10 Percent \n"));
-
-            if (dimmInfo->suported5PercentUpperVCC == 1)
- 	           DP(printf(" - upper VCC tolerance:			5 Percent \n"));
-            else
- 	           DP(printf(" -  upper VCC tolerance:			10 Percent \n"));
+			if (dimmInfo->suportedEarlyRasPreCharge == 1)
+				DP (printf
+				    (" - Early Ras Precharge:			Yes \n"));
+			else
+				DP (printf
+				    (" -  Early Ras Precharge:			No \n"));
+
+			if (dimmInfo->suportedAutoPreCharge == 1)
+				DP (printf
+				    (" - AutoPreCharge:				Yes \n"));
+			else
+				DP (printf
+				    (" -  AutoPreCharge:				No \n"));
+
+			if (dimmInfo->suportedPreChargeAll == 1)
+				DP (printf
+				    (" - Precharge All:				Yes \n"));
+			else
+				DP (printf
+				    (" -  Precharge All:				No \n"));
+
+			if (dimmInfo->suportedWrite1ReadBurst == 1)
+				DP (printf
+				    (" - Write 1/ReadBurst:				Yes \n"));
+			else
+				DP (printf
+				    (" -  Write 1/ReadBurst:				No \n"));
+
+			if (dimmInfo->suported5PercentLowVCC == 1)
+				DP (printf
+				    (" - lower VCC tolerance:			5 Percent \n"));
+			else
+				DP (printf
+				    ("  - lower VCC tolerance:			10 Percent \n"));
+
+			if (dimmInfo->suported5PercentUpperVCC == 1)
+				DP (printf
+				    (" - upper VCC tolerance:			5 Percent \n"));
+			else
+				DP (printf
+				    (" -  upper VCC tolerance:			10 Percent \n"));
 
 #endif
-            break;
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 23: /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
-            shift = (dimmInfo->memoryType == DDR)? 4:2;
-            mult = (dimmInfo->memoryType == DDR)? 10:25;
-            maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc;
-            maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03;
-            leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-            rightOfPoint = (data[i] & maskRightOfPoint)* mult;
-            dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP = leftOfPoint;
-            dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP = rightOfPoint;
-	    DP(printf("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",leftOfPoint, rightOfPoint ));
-	    /*dimmInfo->minimumCycleTimeAtMaxCasLatancy*/
-            break;
+		case 23:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
+			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
+			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
+			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
+			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP =
+				leftOfPoint;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP =
+				rightOfPoint;
+			DP (printf
+			    ("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",
+			     leftOfPoint, rightOfPoint));
+			/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/
-            div = (dimmInfo->memoryType == DDR)? 100:10;
-            time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
-            leftOfPoint     = time_tmp / div;
-            rightOfPoint    = time_tmp % div;
-            dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint;
-            dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint;
-	    DP(printf("Clock To Data Out (2nd CL value): 		%d.%2d [ns]\n",leftOfPoint,  rightOfPoint ));
-            break;
+		case 24:	/* Clock To Data Out 2nd highest Cas Latency Value */
+			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
+			time_tmp =
+				(((data[i] & 0xf0) >> 4) * 10) +
+				((data[i] & 0x0f));
+			leftOfPoint = time_tmp / div;
+			rightOfPoint = time_tmp % div;
+			dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint;
+			dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint;
+			DP (printf
+			    ("Clock To Data Out (2nd CL value): 		%d.%2d [ns]\n",
+			     leftOfPoint, rightOfPoint));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 25: /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
-            shift = (dimmInfo->memoryType == DDR)? 4:2;
-            mult = (dimmInfo->memoryType == DDR)? 10:25;
-            maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc;
-            maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03;
-            leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
-            rightOfPoint = (data[i] & maskRightOfPoint)* mult;
-            dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP = leftOfPoint;
-            dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP = rightOfPoint;
-	    DP(printf("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",leftOfPoint, rightOfPoint ));
-	    /*dimmInfo->minimumCycleTimeAtMaxCasLatancy*/
-            break;
+		case 25:	/* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
+			shift = (dimmInfo->memoryType == DDR) ? 4 : 2;
+			mult = (dimmInfo->memoryType == DDR) ? 10 : 25;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf0 : 0xfc;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xf : 0x03;
+			leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
+			rightOfPoint = (data[i] & maskRightOfPoint) * mult;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP =
+				leftOfPoint;
+			dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP =
+				rightOfPoint;
+			DP (printf
+			    ("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",
+			     leftOfPoint, rightOfPoint));
+			/*dimmInfo->minimumCycleTimeAtMaxCasLatancy */
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/
-            div = (dimmInfo->memoryType == DDR)? 100:10;
-            time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
-            leftOfPoint     = time_tmp / div;
-            rightOfPoint    = time_tmp % div;
-            dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint;
-            dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint;
-	    DP(printf("Clock To Data Out (3rd CL value): 		%d.%2d [ns]\n",leftOfPoint,  rightOfPoint ));
-            break;
+		case 26:	/* Clock To Data Out 3rd highest Cas Latency Value */
+			div = (dimmInfo->memoryType == DDR) ? 100 : 10;
+			time_tmp =
+				(((data[i] & 0xf0) >> 4) * 10) +
+				((data[i] & 0x0f));
+			leftOfPoint = time_tmp / div;
+			rightOfPoint = time_tmp % div;
+			dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint;
+			dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint;
+			DP (printf
+			    ("Clock To Data Out (3rd CL value): 		%d.%2d [ns]\n",
+			     leftOfPoint, rightOfPoint));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 27: /* Minimum Row Precharge Time */
-            shift = (dimmInfo->memoryType == DDR)? 2:0;
-            maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff;
-            maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00;
-            leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-            rightOfPoint = (data[i] & maskRightOfPoint)*25;
-
-            dimmInfo->minRowPrechargeTime = ((leftOfPoint*100) + rightOfPoint);	/* measured in n times 10ps Intervals */
-	trp_clocks = (dimmInfo->minRowPrechargeTime + (tmemclk-1)) /  tmemclk;
-	DP(printf("*** 1 clock cycle = %ld  10ps intervalls = %ld.%ld ns****\n", tmemclk, tmemclk/100, tmemclk%100 ));
-	DP(printf("Minimum Row Precharge Time [ns]: 		%d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks));
-            break;
+		case 27:	/* Minimum Row Precharge Time */
+			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
+			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
+			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
+
+			dimmInfo->minRowPrechargeTime = ((leftOfPoint * 100) + rightOfPoint);	/* measured in n times 10ps Intervals */
+			trp_clocks =
+				(dimmInfo->minRowPrechargeTime +
+				 (tmemclk - 1)) / tmemclk;
+			DP (printf
+			    ("*** 1 clock cycle = %ld  10ps intervalls = %ld.%ld ns****\n",
+			     tmemclk, tmemclk / 100, tmemclk % 100));
+			DP (printf
+			    ("Minimum Row Precharge Time [ns]: 		%d.%2d = in Clk cycles %d\n",
+			     leftOfPoint, rightOfPoint, trp_clocks));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 28: /* Minimum Row Active to Row Active Time */
-            shift = (dimmInfo->memoryType == DDR)? 2:0;
-            maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff;
-            maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00;
-            leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-            rightOfPoint = (data[i] & maskRightOfPoint)*25;
-
-            dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint*100) + rightOfPoint);	/* measured in 100ns Intervals */
-	trrd_clocks = (dimmInfo->minRowActiveRowActiveDelay + (tmemclk-1)) / tmemclk;
-	DP(printf("Minimum Row Active -To- Row Active Delay [ns]: 	%d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks));
-            break;
+		case 28:	/* Minimum Row Active to Row Active Time */
+			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
+			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
+			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
+
+			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
+			trrd_clocks =
+				(dimmInfo->minRowActiveRowActiveDelay +
+				 (tmemclk - 1)) / tmemclk;
+			DP (printf
+			    ("Minimum Row Active -To- Row Active Delay [ns]: 	%d.%2d = in Clk cycles %d\n",
+			     leftOfPoint, rightOfPoint, trp_clocks));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 29: /* Minimum Ras-To-Cas Delay */
-            shift = (dimmInfo->memoryType == DDR)? 2:0;
-            maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff;
-            maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00;
-            leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
-            rightOfPoint = (data[i] & maskRightOfPoint)*25;
-
-            dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint*100) + rightOfPoint);	/* measured in 100ns Intervals */
-	trcd_clocks = (dimmInfo->minRowActiveRowActiveDelay + (tmemclk-1) )/ tmemclk;
-	DP(printf("Minimum Ras-To-Cas Delay [ns]: 			%d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks));
-            break;
+		case 29:	/* Minimum Ras-To-Cas Delay */
+			shift = (dimmInfo->memoryType == DDR) ? 2 : 0;
+			maskLeftOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0xfc : 0xff;
+			maskRightOfPoint =
+				(dimmInfo->memoryType == DDR) ? 0x03 : 0x00;
+			leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
+			rightOfPoint = (data[i] & maskRightOfPoint) * 25;
+
+			dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint * 100) + rightOfPoint);	/* measured in 100ns Intervals */
+			trcd_clocks =
+				(dimmInfo->minRowActiveRowActiveDelay +
+				 (tmemclk - 1)) / tmemclk;
+			DP (printf
+			    ("Minimum Ras-To-Cas Delay [ns]: 			%d.%2d = in Clk cycles %d\n",
+			     leftOfPoint, rightOfPoint, trp_clocks));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 30: /* Minimum Ras Pulse Width */
-            dimmInfo->minRasPulseWidth = data[i];
-	tras_clocks = (NSto10PS(data[i])+(tmemclk-1)) / tmemclk;
-	DP(printf("Minimum Ras Pulse Width [ns]: 			%d = in Clk cycles %d\n", dimmInfo->minRasPulseWidth, tras_clocks));
+		case 30:	/* Minimum Ras Pulse Width */
+			dimmInfo->minRasPulseWidth = data[i];
+			tras_clocks =
+				(NSto10PS (data[i]) +
+				 (tmemclk - 1)) / tmemclk;
+			DP (printf
+			    ("Minimum Ras Pulse Width [ns]: 			%d = in Clk cycles %d\n",
+			     dimmInfo->minRasPulseWidth, tras_clocks));
 
-            break;
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 31: /* Module Bank Density */
-            dimmInfo->moduleBankDensity = data[i];
-	DP(printf("Module Bank Density: 				%d\n", dimmInfo->moduleBankDensity));
+		case 31:	/* Module Bank Density */
+			dimmInfo->moduleBankDensity = data[i];
+			DP (printf
+			    ("Module Bank Density: 				%d\n",
+			     dimmInfo->moduleBankDensity));
 #ifdef DEBUG
-	DP(printf("*** Offered Densities (more than 1 = Multisize-Module): "));
-	{
-		if (dimmInfo->moduleBankDensity & 1)
-			DP(printf("4MB, "));
-		if (dimmInfo->moduleBankDensity & 2)
-			DP(printf("8MB, "));
-		if (dimmInfo->moduleBankDensity & 4)
-			DP(printf("16MB, "));
-		if (dimmInfo->moduleBankDensity & 8)
-			DP(printf("32MB, "));
-		if (dimmInfo->moduleBankDensity & 16)
-			DP(printf("64MB, "));
-		if (dimmInfo->moduleBankDensity & 32)
-			DP(printf("128MB, "));
-		if ((dimmInfo->moduleBankDensity & 64) || (dimmInfo->moduleBankDensity & 128)) {
-			DP(printf("ERROR, "));
-		        	hang();
+			DP (printf
+			    ("*** Offered Densities (more than 1 = Multisize-Module): "));
+			{
+				if (dimmInfo->moduleBankDensity & 1)
+					DP (printf ("4MB, "));
+				if (dimmInfo->moduleBankDensity & 2)
+					DP (printf ("8MB, "));
+				if (dimmInfo->moduleBankDensity & 4)
+					DP (printf ("16MB, "));
+				if (dimmInfo->moduleBankDensity & 8)
+					DP (printf ("32MB, "));
+				if (dimmInfo->moduleBankDensity & 16)
+					DP (printf ("64MB, "));
+				if (dimmInfo->moduleBankDensity & 32)
+					DP (printf ("128MB, "));
+				if ((dimmInfo->moduleBankDensity & 64)
+				    || (dimmInfo->moduleBankDensity & 128)) {
+					DP (printf ("ERROR, "));
+					hang ();
+				}
 			}
-	}
-	DP(printf("\n"));
+			DP (printf ("\n"));
 #endif
-            break;
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 32: /* Address And Command Setup Time (measured in ns/1000) */
-            sign = 1;
-            switch(dimmInfo->memoryType)
-            {
-            case DDR:
-            	  time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
-                leftOfPoint = time_tmp / 100;
-                rightOfPoint = time_tmp % 100;
-                break;
-            case SDRAM:
-                leftOfPoint = (data[i] & 0xf0) >> 4;
-                if(leftOfPoint > 7)
-                {
-                    leftOfPoint = data[i] & 0x70 >> 4;
-                    sign = -1;
-                }
-                rightOfPoint = (data[i] & 0x0f);
-                break;
-            }
-            dimmInfo->addrAndCommandSetupTime = (leftOfPoint*100 + rightOfPoint) * sign;
-	DP(printf("Address And Command Setup Time [ns]: 		%d.%d\n", sign*leftOfPoint, rightOfPoint));
-            break;
+		case 32:	/* Address And Command Setup Time (measured in ns/1000) */
+			sign = 1;
+			switch (dimmInfo->memoryType) {
+			case DDR:
+				time_tmp =
+					(((data[i] & 0xf0) >> 4) * 10) +
+					((data[i] & 0x0f));
+				leftOfPoint = time_tmp / 100;
+				rightOfPoint = time_tmp % 100;
+				break;
+			case SDRAM:
+				leftOfPoint = (data[i] & 0xf0) >> 4;
+				if (leftOfPoint > 7) {
+					leftOfPoint = data[i] & 0x70 >> 4;
+					sign = -1;
+				}
+				rightOfPoint = (data[i] & 0x0f);
+				break;
+			}
+			dimmInfo->addrAndCommandSetupTime =
+				(leftOfPoint * 100 + rightOfPoint) * sign;
+			DP (printf
+			    ("Address And Command Setup Time [ns]: 		%d.%d\n",
+			     sign * leftOfPoint, rightOfPoint));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 33: /* Address And Command Hold Time */
-            sign = 1;
-            switch(dimmInfo->memoryType)
-            {
-            case DDR:
-            	  time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
-                leftOfPoint = time_tmp / 100;
-                rightOfPoint = time_tmp % 100;
-                break;
-            case SDRAM:
-                leftOfPoint = (data[i] & 0xf0) >> 4;
-                if(leftOfPoint > 7)
-                {
-                    leftOfPoint = data[i] & 0x70 >> 4;
-                    sign = -1;
-                }
-                rightOfPoint = (data[i] & 0x0f) ;
-                break;
-            }
-            dimmInfo->addrAndCommandHoldTime = (leftOfPoint * 100 + rightOfPoint) * sign;
-	DP(printf("Address And Command Hold Time [ns]: 		%d.%d\n", sign*leftOfPoint, rightOfPoint));
-            break;
+		case 33:	/* Address And Command Hold Time */
+			sign = 1;
+			switch (dimmInfo->memoryType) {
+			case DDR:
+				time_tmp =
+					(((data[i] & 0xf0) >> 4) * 10) +
+					((data[i] & 0x0f));
+				leftOfPoint = time_tmp / 100;
+				rightOfPoint = time_tmp % 100;
+				break;
+			case SDRAM:
+				leftOfPoint = (data[i] & 0xf0) >> 4;
+				if (leftOfPoint > 7) {
+					leftOfPoint = data[i] & 0x70 >> 4;
+					sign = -1;
+				}
+				rightOfPoint = (data[i] & 0x0f);
+				break;
+			}
+			dimmInfo->addrAndCommandHoldTime =
+				(leftOfPoint * 100 + rightOfPoint) * sign;
+			DP (printf
+			    ("Address And Command Hold Time [ns]: 		%d.%d\n",
+			     sign * leftOfPoint, rightOfPoint));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 34: /* Data Input Setup Time */
-            sign = 1;
-            switch(dimmInfo->memoryType)
-            {
-            case DDR:
-            	  time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
-                leftOfPoint = time_tmp / 100;
-                rightOfPoint = time_tmp % 100;
-                break;
-            case SDRAM:
-                leftOfPoint = (data[i] & 0xf0) >> 4;
-                if( leftOfPoint > 7)
-                {
-                    leftOfPoint = data[i] & 0x70 >> 4;
-                    sign = -1;
-                }
-                rightOfPoint = (data[i] & 0x0f );
-                break;
-            }
-            dimmInfo->dataInputSetupTime = (leftOfPoint *100 + rightOfPoint) * sign;
-	DP(printf("Data Input Setup Time [ns]: 			%d.%d\n", sign*leftOfPoint, rightOfPoint));
-            break;
+		case 34:	/* Data Input Setup Time */
+			sign = 1;
+			switch (dimmInfo->memoryType) {
+			case DDR:
+				time_tmp =
+					(((data[i] & 0xf0) >> 4) * 10) +
+					((data[i] & 0x0f));
+				leftOfPoint = time_tmp / 100;
+				rightOfPoint = time_tmp % 100;
+				break;
+			case SDRAM:
+				leftOfPoint = (data[i] & 0xf0) >> 4;
+				if (leftOfPoint > 7) {
+					leftOfPoint = data[i] & 0x70 >> 4;
+					sign = -1;
+				}
+				rightOfPoint = (data[i] & 0x0f);
+				break;
+			}
+			dimmInfo->dataInputSetupTime =
+				(leftOfPoint * 100 + rightOfPoint) * sign;
+			DP (printf
+			    ("Data Input Setup Time [ns]: 			%d.%d\n",
+			     sign * leftOfPoint, rightOfPoint));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
 
-        case 35: /* Data Input Hold Time */
-            sign = 1;
-            switch(dimmInfo->memoryType)
-            {
-            case DDR:
-            	  time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
-                leftOfPoint = time_tmp / 100;
-                rightOfPoint = time_tmp % 100;
-                break;
-            case SDRAM:
-                leftOfPoint = (data[i] & 0xf0) >> 4;
-                if( leftOfPoint > 7)
-                {
-                    leftOfPoint = data[i] & 0x70 >> 4;
-                    sign = -1;
-                }
-                rightOfPoint = (data[i] & 0x0f) ;
-                break;
-            }
-            dimmInfo->dataInputHoldTime = (leftOfPoint *100 + rightOfPoint) * sign;
-	DP(printf("Data Input Hold Time [ns]: 			%d.%d\n\n", sign*leftOfPoint, rightOfPoint));
-            break;
+		case 35:	/* Data Input Hold Time */
+			sign = 1;
+			switch (dimmInfo->memoryType) {
+			case DDR:
+				time_tmp =
+					(((data[i] & 0xf0) >> 4) * 10) +
+					((data[i] & 0x0f));
+				leftOfPoint = time_tmp / 100;
+				rightOfPoint = time_tmp % 100;
+				break;
+			case SDRAM:
+				leftOfPoint = (data[i] & 0xf0) >> 4;
+				if (leftOfPoint > 7) {
+					leftOfPoint = data[i] & 0x70 >> 4;
+					sign = -1;
+				}
+				rightOfPoint = (data[i] & 0x0f);
+				break;
+			}
+			dimmInfo->dataInputHoldTime =
+				(leftOfPoint * 100 + rightOfPoint) * sign;
+			DP (printf
+			    ("Data Input Hold Time [ns]: 			%d.%d\n\n",
+			     sign * leftOfPoint, rightOfPoint));
+			break;
 /*------------------------------------------------------------------------------------------------------------------------------*/
-        }
-    }
-    /* calculating the sdram density */
-    for(i = 0;i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses;i++)
-    {
-        density = density*2;
-    }
-    dimmInfo->deviceDensity = density*dimmInfo->numOfBanksOnEachDevice*
-                             dimmInfo->sdramWidth;
-    dimmInfo->numberOfDevices = (dimmInfo->dataWidth / dimmInfo->sdramWidth)*
-                                 dimmInfo->numOfModuleBanks;
-    devicesForErrCheck = (dimmInfo->dataWidth - 64) / dimmInfo->sdramWidth ;
-    if((dimmInfo->errorCheckType == 0x1) ||
-       (dimmInfo->errorCheckType == 0x2) ||
-       (dimmInfo->errorCheckType == 0x3))
-    {
-        dimmInfo->size = (dimmInfo->deviceDensity / 8)*
-                         (dimmInfo->numberOfDevices - devicesForErrCheck);
-    }
-    else
-    {
-        dimmInfo->size = (dimmInfo->deviceDensity/8)*dimmInfo->numberOfDevices;
-    }
+		}
+	}
+	/* calculating the sdram density */
+	for (i = 0;
+	     i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses;
+	     i++) {
+		density = density * 2;
+	}
+	dimmInfo->deviceDensity = density * dimmInfo->numOfBanksOnEachDevice *
+		dimmInfo->sdramWidth;
+	dimmInfo->numberOfDevices =
+		(dimmInfo->dataWidth / dimmInfo->sdramWidth) *
+		dimmInfo->numOfModuleBanks;
+	devicesForErrCheck =
+		(dimmInfo->dataWidth - 64) / dimmInfo->sdramWidth;
+	if ((dimmInfo->errorCheckType == 0x1)
+	    || (dimmInfo->errorCheckType == 0x2)
+	    || (dimmInfo->errorCheckType == 0x3)) {
+		dimmInfo->size =
+			(dimmInfo->deviceDensity / 8) *
+			(dimmInfo->numberOfDevices - devicesForErrCheck);
+	} else {
+		dimmInfo->size =
+			(dimmInfo->deviceDensity / 8) *
+			dimmInfo->numberOfDevices;
+	}
 
-    /* compute the module DRB size */
-    tmp = (1 << (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses));
-    tmp *= dimmInfo->numOfModuleBanks;
-    tmp *= dimmInfo->sdramWidth;
-    tmp = tmp >> 24;    /* div by 0x4000000 (64M)	*/
-    dimmInfo->drb_size = (uchar)tmp;
-    DP(printf("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size));
+	/* compute the module DRB size */
+	tmp = (1 <<
+	       (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses));
+	tmp *= dimmInfo->numOfModuleBanks;
+	tmp *= dimmInfo->sdramWidth;
+	tmp = tmp >> 24;	/* div by 0x4000000 (64M)       */
+	dimmInfo->drb_size = (uchar) tmp;
+	DP (printf ("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size));
 
 	/* try a CAS latency of 3 first... */
 
@@ -1010,44 +1224,43 @@ check_dimm(uchar slot, AUX_MEM_DIMM_INFO *dimmInfo)
 
 	cal_val = 0;
 	if (supp_cal & 8) {
-		if (NS10to10PS(data[9]) <= tmemclk)
+		if (NS10to10PS (data[9]) <= tmemclk)
 			cal_val = 6;
 	}
 	if (supp_cal & 4) {
-		if (NS10to10PS(data[9]) <= tmemclk)
+		if (NS10to10PS (data[9]) <= tmemclk)
 			cal_val = 5;
 	}
 
 	/* then 2... */
 	if (supp_cal & 2) {
-		if (NS10to10PS(data[23]) <= tmemclk)
+		if (NS10to10PS (data[23]) <= tmemclk)
 			cal_val = 4;
 	}
 
-	DP(printf("cal_val = %d\n", cal_val*5));
+	DP (printf ("cal_val = %d\n", cal_val * 5));
 
 	/* bummer, did't work... */
 	if (cal_val == 0) {
-		DP(printf("Couldn't find a good CAS latency\n"));
-	        	hang();
+		DP (printf ("Couldn't find a good CAS latency\n"));
+		hang ();
 		return 0;
 	}
 
-    return true;
+	return true;
 }
 
 /* sets up the GT properly with information passed in */
-int
-setup_sdram(AUX_MEM_DIMM_INFO *info)
+int setup_sdram (AUX_MEM_DIMM_INFO * info)
 {
 	ulong tmp, check;
-              ulong tmp_sdram_mode=0; 		/* 0x141c*/
-              ulong tmp_dunit_control_low=0;	/* 0x1404*/
+	ulong tmp_sdram_mode = 0;	/* 0x141c */
+	ulong tmp_dunit_control_low = 0;	/* 0x1404 */
 	int i;
 
 	/* sanity checking */
-	if (! info->numOfModuleBanks) {
-		printf("setup_sdram called with 0 banks\n");
+	if (!info->numOfModuleBanks) {
+		printf ("setup_sdram called with 0 banks\n");
 		return 1;
 	}
 
@@ -1055,137 +1268,150 @@ setup_sdram(AUX_MEM_DIMM_INFO *info)
 
 	/* Program the GT with the discovered data */
 	if (info->registeredAddrAndControlInputs == true)
-		DP(printf("Module is registered, but we do not support registered Modules !!!\n"));
+		DP (printf
+		    ("Module is registered, but we do not support registered Modules !!!\n"));
 
 
 	/* delay line */
-	set_dfcdlInit(); /* may be its not needed */
-	DP(printf("Delay line set done\n"));
-
-	/* set SDRAM mode NOP*/ /* To_do check it*/
-	GT_REG_WRITE(SDRAM_OPERATION, 0x5);
-	while (GTREGREAD(SDRAM_OPERATION) != 0) {
-		DP(printf("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n"));
-		}
+	set_dfcdlInit ();	/* may be its not needed */
+	DP (printf ("Delay line set done\n"));
+
+	/* set SDRAM mode NOP */ /* To_do check it */
+	GT_REG_WRITE (SDRAM_OPERATION, 0x5);
+	while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n"));
+	}
 
 	/* SDRAM configuration */
-	GT_REG_WRITE(SDRAM_CONFIG, 0x58200400);
-	DP(printf("sdram_conf 0x1400: %08x\n", GTREGREAD(SDRAM_CONFIG)));
+	GT_REG_WRITE (SDRAM_CONFIG, 0x58200400);
+	DP (printf ("sdram_conf 0x1400: %08x\n", GTREGREAD (SDRAM_CONFIG)));
 
-	/* SDRAM open pages controll keep open as much as I can*/
-	GT_REG_WRITE(SDRAM_OPEN_PAGES_CONTROL, 0x0);
-	DP(printf("sdram_open_pages_controll 0x1414: %08x\n", GTREGREAD(SDRAM_OPEN_PAGES_CONTROL)));
+	/* SDRAM open pages controll keep open as much as I can */
+	GT_REG_WRITE (SDRAM_OPEN_PAGES_CONTROL, 0x0);
+	DP (printf
+	    ("sdram_open_pages_controll 0x1414: %08x\n",
+	     GTREGREAD (SDRAM_OPEN_PAGES_CONTROL)));
 
 
 	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
-	tmp = (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x01); 		/* Clock Domain Sync from power on reset*/
+	tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01);	/* Clock Domain Sync from power on reset */
 	if (tmp == 0)
-		DP(printf("Core Signals are sync (by HW-Setting)!!!\n"));
+		DP (printf ("Core Signals are sync (by HW-Setting)!!!\n"));
 	else
-		DP(printf("Core Signals syncs. are bypassed (by HW-Setting)!!!\n"));
-
-	/* SDRAM set CAS Lentency according to SPD information*/
-	switch(info->memoryType)
-	  {
-	  case SDRAM:
-	    DP(printf("### SD-RAM not supported yet !!!\n"));
-	    hang();
-	    /* ToDo fill SD-RAM if needed !!!!!*/
-	    break;
-
-	  case DDR:
-	    DP(printf("### SET-CL for DDR-RAM\n"));
-
-	    switch (info->maxClSupported_DDR)
-	      {
-	      case DDR_CL_3:
-		tmp_dunit_control_low = 0x3c000000;             /* Read-Data sampled on falling edge of Clk*/
-		tmp_sdram_mode = 0x32;			        /* CL=3 Burstlength = 4*/
-		DP(printf("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
+		DP (printf
+		    ("Core Signals syncs. are bypassed (by HW-Setting)!!!\n"));
+
+	/* SDRAM set CAS Lentency according to SPD information */
+	switch (info->memoryType) {
+	case SDRAM:
+		DP (printf ("### SD-RAM not supported yet !!!\n"));
+		hang ();
+		/* ToDo fill SD-RAM if needed !!!!! */
 		break;
 
-	      case DDR_CL_2_5:
-		if (tmp == 1)	/* clocks sync*/
-		  {
-		    tmp_dunit_control_low = 0x24000000;		/* Read-Data sampled on falling edge of Clk*/
-		    tmp_sdram_mode = 0x62;			/* CL=2,5 Burstlength = 4*/
-		    DP(printf("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
-		  }
-		else	/* clk sync. bypassed	*/
-		  {
-		    tmp_dunit_control_low = 0x03000000;		/* Read-Data sampled on rising edge of Clk*/
-		    tmp_sdram_mode = 0x62;			/* CL=2,5 Burstlength = 4*/
-		    DP(printf("Max. CL is 2,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
-		  }
-		break;
-
-	      case DDR_CL_2:
-		if (tmp == 1)	/* Sync*/
-		  {
-		    tmp_dunit_control_low = 0x03000000;		/* Read-Data sampled on rising edge of Clk*/
-		    tmp_sdram_mode = 0x22;			/* CL=2 Burstlength = 4*/
-		    DP(printf("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
-		  }
-		else	/* Not sync.	*/
-		  {
-		    tmp_dunit_control_low = 0x3b000000;         /* Read-Data sampled on rising edge of Clk*/
-		    tmp_sdram_mode = 0x22;			/* CL=2 Burstlength = 4*/
-		    DP(printf("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
-		  }
-		break;
-
-	      case DDR_CL_1_5:
-		if (tmp == 1)	/* Sync*/
-		  {
-		    tmp_dunit_control_low = 0x23000000;		/* Read-Data sampled on falling edge of Clk*/
-		    tmp_sdram_mode = 0x52;			/* CL=1,5 Burstlength = 4*/
-		    DP(printf("Max. CL is 1,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
-		  }
-		else	/* not sync*/
-		  {
-		    tmp_dunit_control_low = 0x1a000000;         /* Read-Data sampled on rising edge of Clk*/
-		    tmp_sdram_mode = 0x52;			/* CL=1,5 Burstlength = 4*/
-		    DP(printf("Max. CL is 1,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
-		  }
-		break;
+	case DDR:
+		DP (printf ("### SET-CL for DDR-RAM\n"));
+
+		switch (info->maxClSupported_DDR) {
+		case DDR_CL_3:
+			tmp_dunit_control_low = 0x3c000000;	/* Read-Data sampled on falling edge of Clk */
+			tmp_sdram_mode = 0x32;	/* CL=3 Burstlength = 4 */
+			DP (printf
+			    ("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+			     tmp_sdram_mode, tmp_dunit_control_low));
+			break;
+
+		case DDR_CL_2_5:
+			if (tmp == 1) {	/* clocks sync */
+				tmp_dunit_control_low = 0x24000000;	/* Read-Data sampled on falling edge of Clk */
+				tmp_sdram_mode = 0x62;	/* CL=2,5 Burstlength = 4 */
+				DP (printf
+				    ("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			} else {	/* clk sync. bypassed     */
+
+				tmp_dunit_control_low = 0x03000000;	/* Read-Data sampled on rising edge of Clk */
+				tmp_sdram_mode = 0x62;	/* CL=2,5 Burstlength = 4 */
+				DP (printf
+				    ("Max. CL is 2,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			}
+			break;
+
+		case DDR_CL_2:
+			if (tmp == 1) {	/* Sync */
+				tmp_dunit_control_low = 0x03000000;	/* Read-Data sampled on rising edge of Clk */
+				tmp_sdram_mode = 0x22;	/* CL=2 Burstlength = 4 */
+				DP (printf
+				    ("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			} else {	/* Not sync.      */
+
+				tmp_dunit_control_low = 0x3b000000;	/* Read-Data sampled on rising edge of Clk */
+				tmp_sdram_mode = 0x22;	/* CL=2 Burstlength = 4 */
+				DP (printf
+				    ("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			}
+			break;
+
+		case DDR_CL_1_5:
+			if (tmp == 1) {	/* Sync */
+				tmp_dunit_control_low = 0x23000000;	/* Read-Data sampled on falling edge of Clk */
+				tmp_sdram_mode = 0x52;	/* CL=1,5 Burstlength = 4 */
+				DP (printf
+				    ("Max. CL is 1,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			} else {	/* not sync */
+
+				tmp_dunit_control_low = 0x1a000000;	/* Read-Data sampled on rising edge of Clk */
+				tmp_sdram_mode = 0x52;	/* CL=1,5 Burstlength = 4 */
+				DP (printf
+				    ("Max. CL is 1,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",
+				     tmp_sdram_mode, tmp_dunit_control_low));
+			}
+			break;
 
-	      default:
-		printf("Max. CL is out of range %d\n", info->maxClSupported_DDR);
-		hang();
+		default:
+			printf ("Max. CL is out of range %d\n",
+				info->maxClSupported_DDR);
+			hang ();
+			break;
+		}
 		break;
-	      }
-	    break;
-	  }
+	}
 
 	/* Write results of CL detection procedure */
-	GT_REG_WRITE(SDRAM_MODE, tmp_sdram_mode);
-	/* set SDRAM mode SetCommand 0x1418*/
-	GT_REG_WRITE(SDRAM_OPERATION, 0x3);
-	while (GTREGREAD(SDRAM_OPERATION) != 0) {
-		DP(printf("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
-		}
+	GT_REG_WRITE (SDRAM_MODE, tmp_sdram_mode);
+	/* set SDRAM mode SetCommand 0x1418 */
+	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
+	while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+	}
 
 
 	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
-	tmp = (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x01); 		/* Clock Domain Sync from power on reset*/
-	if (tmp != 1)	/*clocks are not sync*/
-	 {
-	  	/* asyncmode*/
-		GT_REG_WRITE(D_UNIT_CONTROL_LOW ,
-               	(GTREGREAD(D_UNIT_CONTROL_LOW) & 0x7F) | 0x18110780 | tmp_dunit_control_low );
-	 }
-	else
-	 {
-	  	/* syncmode*/
-		GT_REG_WRITE(D_UNIT_CONTROL_LOW ,
-		(GTREGREAD(D_UNIT_CONTROL_LOW) & 0x7F) | 0x00110000 | tmp_dunit_control_low );
-	  }
-
-	/* set SDRAM mode SetCommand 0x1418*/
-	GT_REG_WRITE(SDRAM_OPERATION, 0x3);
-	while (GTREGREAD(SDRAM_OPERATION) != 0) {
-		DP(printf("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n"));
-		}
+	tmp = (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x01);	/* Clock Domain Sync from power on reset */
+	if (tmp != 1) {		/*clocks are not sync */
+		/* asyncmode */
+		GT_REG_WRITE (D_UNIT_CONTROL_LOW,
+			      (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x7F) |
+			      0x18110780 | tmp_dunit_control_low);
+	} else {
+		/* syncmode */
+		GT_REG_WRITE (D_UNIT_CONTROL_LOW,
+			      (GTREGREAD (D_UNIT_CONTROL_LOW) & 0x7F) |
+			      0x00110000 | tmp_dunit_control_low);
+	}
+
+	/* set SDRAM mode SetCommand 0x1418 */
+	GT_REG_WRITE (SDRAM_OPERATION, 0x3);
+	while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n"));
+	}
 
 /*------------------------------------------------------------------------------ */
 
@@ -1196,93 +1422,113 @@ setup_sdram(AUX_MEM_DIMM_INFO *info)
 	tmp = 0x02;
 
 
-	DP(printf("drb_size (n*64Mbit): %d\n", info->drb_size));
+	DP (printf ("drb_size (n*64Mbit): %d\n", info->drb_size));
 	switch (info->drb_size) {
-	case 1:			/* 64 Mbit */
-	case 2:			/* 128 Mbit */
-		DP(printf("RAM-Device_size 64Mbit or 128Mbit)\n"));
+	case 1:		/* 64 Mbit */
+	case 2:		/* 128 Mbit */
+		DP (printf ("RAM-Device_size 64Mbit or 128Mbit)\n"));
 		tmp |= (0x00 << 4);
 		break;
-	case 4:			/* 256 Mbit */
-	case 8:			/* 512 Mbit */
-		DP(printf("RAM-Device_size 256Mbit or 512Mbit)\n"));
+	case 4:		/* 256 Mbit */
+	case 8:		/* 512 Mbit */
+		DP (printf ("RAM-Device_size 256Mbit or 512Mbit)\n"));
 		tmp |= (0x01 << 4);
 		break;
-	case 16:			/* 1 Gbit */
-	case 32:			/* 2 Gbit */
-		DP(printf("RAM-Device_size 1Gbit or 2Gbit)\n"));
+	case 16:		/* 1 Gbit */
+	case 32:		/* 2 Gbit */
+		DP (printf ("RAM-Device_size 1Gbit or 2Gbit)\n"));
 		tmp |= (0x02 << 4);
 		break;
 	default:
-		printf("Error in dram size calculation\n");
-		DP(printf("Assume: RAM-Device_size 1Gbit or 2Gbit)\n"));
+		printf ("Error in dram size calculation\n");
+		DP (printf ("Assume: RAM-Device_size 1Gbit or 2Gbit)\n"));
 		tmp |= (0x02 << 4);
 		return 1;
 	}
 
 	/* SDRAM bank parameters */
 	/* the param registers for slot 1 (banks 2+3) are offset by 0x8 */
-	DP(printf("setting up slot %d config with: %08lx \n", info->slot, tmp));
-	GT_REG_WRITE(SDRAM_ADDR_CONTROL, tmp);
+	DP (printf
+	    ("setting up slot %d config with: %08lx \n", info->slot, tmp));
+	GT_REG_WRITE (SDRAM_ADDR_CONTROL, tmp);
 
 /* ------------------------------------------------------------------------------ */
 
-	DP(printf("setting up sdram_timing_control_low with: %08x \n", 0x11511220));
-	GT_REG_WRITE(SDRAM_TIMING_CONTROL_LOW, 0x11511220);
+	DP (printf
+	    ("setting up sdram_timing_control_low with: %08x \n",
+	     0x11511220));
+	GT_REG_WRITE (SDRAM_TIMING_CONTROL_LOW, 0x11511220);
 
 
 /* ------------------------------------------------------------------------------ */
 
 	/* SDRAM configuration */
-	tmp = GTREGREAD(SDRAM_CONFIG);
-
-	if (info->registeredAddrAndControlInputs || info->registeredDQMBinputs) {
-	tmp |= (1 << 17);
-	DP(printf("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",info->registeredAddrAndControlInputs, info->registeredDQMBinputs));
+	tmp = GTREGREAD (SDRAM_CONFIG);
+
+	if (info->registeredAddrAndControlInputs
+	    || info->registeredDQMBinputs) {
+		tmp |= (1 << 17);
+		DP (printf
+		    ("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",
+		     info->registeredAddrAndControlInputs,
+		     info->registeredDQMBinputs));
 	}
 
 	/* Use buffer 1 to return read data to the CPU
 	 * Page 426 MV64360 */
 	tmp |= (1 << 26);
-	DP(printf("Before Buffer assignment - sdram_conf: %08x\n", GTREGREAD(SDRAM_CONFIG)));
-	DP(printf("After Buffer assignment - sdram_conf: %08x\n", GTREGREAD(SDRAM_CONFIG)));
+	DP (printf
+	    ("Before Buffer assignment - sdram_conf: %08x\n",
+	     GTREGREAD (SDRAM_CONFIG)));
+	DP (printf
+	    ("After Buffer assignment - sdram_conf: %08x\n",
+	     GTREGREAD (SDRAM_CONFIG)));
 
-	/* SDRAM timing To_do:*/
+	/* SDRAM timing To_do: */
 
 
-	tmp = GTREGREAD(SDRAM_TIMING_CONTROL_HIGH);
-	DP(printf("# sdram_timing_control_high is : %08lx \n", tmp));
+	tmp = GTREGREAD (SDRAM_TIMING_CONTROL_HIGH);
+	DP (printf ("# sdram_timing_control_high is : %08lx \n", tmp));
 
 	/* SDRAM address decode register */
 	/* program this with the default value */
-	tmp = GTREGREAD(SDRAM_ADDR_CONTROL);
-	DP(printf("SDRAM address control (before: decode): %08x  ",  GTREGREAD(SDRAM_ADDR_CONTROL)));
-	GT_REG_WRITE(SDRAM_ADDR_CONTROL, (tmp | 0x2));
-	DP(printf("SDRAM address control (after: decode): %08x\n",  GTREGREAD(SDRAM_ADDR_CONTROL)));
+	tmp = GTREGREAD (SDRAM_ADDR_CONTROL);
+	DP (printf
+	    ("SDRAM address control (before: decode): %08x  ",
+	     GTREGREAD (SDRAM_ADDR_CONTROL)));
+	GT_REG_WRITE (SDRAM_ADDR_CONTROL, (tmp | 0x2));
+	DP (printf
+	    ("SDRAM address control (after: decode): %08x\n",
+	     GTREGREAD (SDRAM_ADDR_CONTROL)));
 
 	/* set the SDRAM configuration for each bank */
 
 /*	for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */
 	{
 		i = info->slot;
-		DP(printf("\n*** Running a MRS cycle for bank %d ***\n", i));
+		DP (printf
+		    ("\n*** Running a MRS cycle for bank %d ***\n", i));
 
 		/* map the bank */
-		memory_map_bank(i, 0, GB/4);
-#if 1 /* test only */
-		/* set SDRAM mode */ /* To_do check it*/
-		GT_REG_WRITE(SDRAM_OPERATION, 0x3);
-		check = GTREGREAD(SDRAM_OPERATION);
-		DP(printf("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", check));
+		memory_map_bank (i, 0, GB / 4);
+#if 1				/* test only */
+		/* set SDRAM mode */ /* To_do check it */
+		GT_REG_WRITE (SDRAM_OPERATION, 0x3);
+		check = GTREGREAD (SDRAM_OPERATION);
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
+		     check));
 
 
 		/* switch back to normal operation mode */
-		GT_REG_WRITE(SDRAM_OPERATION, 0);
-		check = GTREGREAD(SDRAM_OPERATION);
-		DP(printf("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", check));
+		GT_REG_WRITE (SDRAM_OPERATION, 0);
+		check = GTREGREAD (SDRAM_OPERATION);
+		DP (printf
+		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
+		     check));
 #endif /* test only */
 		/* unmap the bank */
-		memory_map_bank(i, 0, 0);
+		memory_map_bank (i, 0, 0);
 	}
 
 	return 0;
@@ -1324,7 +1570,7 @@ dram_size(long int *base, long int maxsize)
 	    *b=save2;
 
 	    if (val != cnt) {
-	     	    DP(printf("Found %08x  at Address %08x (failure)\n", (unsigned int)val, (unsigned int) addr));
+		    DP(printf("Found %08x  at Address %08x (failure)\n", (unsigned int)val, (unsigned int) addr));
 		    /* fix boundary condition.. STARTVAL means zero */
 		    if(cnt==STARTVAL/sizeof(long)) cnt=0;
 		    return (cnt * sizeof(long));
@@ -1342,7 +1588,7 @@ initdram(int board_type)
 {
 	int s0 = 0, s1 = 0;
 	int checkbank[4] = { [0 ... 3] = 0 };
-        	ulong bank_no, realsize, total, check;
+		ulong bank_no, realsize, total, check;
 	AUX_MEM_DIMM_INFO dimmInfo1;
 	AUX_MEM_DIMM_INFO dimmInfo2;
 	int nhr;
@@ -1407,7 +1653,7 @@ initdram(int board_type)
 	}
 
 /*	Setup Ethernet DMA Adress window to DRAM Area */
-        return(total);
+	return(total);
 }
 
 /* ***************************************************************************************
@@ -1422,18 +1668,16 @@ initdram(int board_type)
 ! *                             DFCDL initialize MV643xx Design Considerations             *
 ! *                                                                                     *
 ! *************************************************************************************** */
-int
-set_dfcdlInit(void)
+int set_dfcdlInit (void)
 {
-     int i;
-     unsigned int dfcdl_word = 0x0000014f;
-      for (i=0 ; i < 64; i++)
-      {
-	GT_REG_WRITE(SRAM_DATA0, dfcdl_word);
-      }
-     GT_REG_WRITE(DFCDL_CONFIG0, 0x00300000);	/* enable dynamic delay line updating */
+	int i;
+	unsigned int dfcdl_word = 0x0000014f;
+
+	for (i = 0; i < 64; i++) {
+		GT_REG_WRITE (SRAM_DATA0, dfcdl_word);
+	}
+	GT_REG_WRITE (DFCDL_CONFIG0, 0x00300000);	/* enable dynamic delay line updating */
 
 
-     return (0);
+	return (0);
 }
-