ppc4xx: Big cleanup of PPC4xx defines

This patch cleans up multiple issues of the 4xx register (mostly
DCR, SDR, CPR, etc) definitions:

- Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
- Change the defines to better match the names from the
  user's manuals (e.g. cprpllc -> CPR0_PLLC)
- Removal of some unused defines

Please test this patch intensive on your PPC4xx platform. Even though
I tried not to break anything and tested successfully on multiple
4xx AMCC platforms, testing on custom platforms is recommended.

Signed-off-by: Stefan Roese <sr@denx.de>

2 files changed, 21 insertions, 21 deletions

diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index a677c62..4c9ed2f 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -214,7 +214,7 @@ int ctermm2(void)
 
 int cpci405_host(void)
 {
-	if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
+	if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN)
 		return -1;		/* yes, board is cpci405 host */
 	else
 		return 0;		/* no, board is cpci405 adapter */
@@ -222,14 +222,14 @@ int cpci405_host(void)
 
 int cpci405_version(void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 	unsigned long value;
 
 	/*
 	 * Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO)
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x03000000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03000000);
 	out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00180000);
 	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00180000);
 	udelay(1000); /* wait some time before reading input */
@@ -238,7 +238,7 @@ int cpci405_version(void)
 	/*
 	 * Restore GPIO settings
 	 */
-	mtdcr(cntrl0, cntrl0Reg);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg);
 
 	switch (value) {
 	case 0x00180000:
@@ -261,7 +261,7 @@ int cpci405_version(void)
 
 int misc_init_r (void)
 {
-	unsigned long cntrl0Reg;
+	unsigned long CPC0_CR0Reg;
 
 	/* adjust flash start and offset */
 	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -283,8 +283,8 @@ int misc_init_r (void)
 		/*
 		 * Setup GPIO pins (CS6+CS7 as GPIO)
 		 */
-		cntrl0Reg = mfdcr(cntrl0);
-		mtdcr(cntrl0, cntrl0Reg | 0x00300000);
+		CPC0_CR0Reg = mfdcr(CPC0_CR0);
+		mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000);
 
 		dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
 		if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE,
@@ -330,7 +330,7 @@ int misc_init_r (void)
 		}
 
 		/* restore gpio/cs settings */
-		mtdcr(cntrl0, cntrl0Reg);
+		mtdcr(CPC0_CR0, CPC0_CR0Reg);
 
 		puts("FPGA:  ");
 
@@ -400,8 +400,8 @@ int misc_init_r (void)
 	/*
 	 * Select cts (and not dsr) on uart1
 	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00001000);
+	CPC0_CR0Reg = mfdcr(CPC0_CR0);
+	mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000);
 
 	return 0;
 }
diff --git a/board/esd/cpci405/flash.c b/board/esd/cpci405/flash.c
index d535924..4fcf174 100644
--- a/board/esd/cpci405/flash.c
+++ b/board/esd/cpci405/flash.c
@@ -91,13 +91,13 @@ unsigned long flash_init (void)
 			size_b1 = 1 << 20;
 		}
 		base_b1 = -size_b1;
-		mtdcr (ebccfga, pb0cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb0cr);
+		mtdcr (EBC0_CFGADDR, PB0CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB0CR);
 		pbcr = (pbcr & 0x0001ffff) | base_b1 | (calc_size(size_b1) << 17);
-		mtdcr (ebccfgd, pbcr);
+		mtdcr (EBC0_CFGDATA, pbcr);
 #if 0 /* test-only */
-		printf("size_b1=%x base_b1=%x pb1cr = %x\n",
+		printf("size_b1=%x base_b1=%x PB1CR = %x\n",
 		       size_b1, base_b1, pbcr); /* test-only */
 #endif
 	}
@@ -108,13 +108,13 @@ unsigned long flash_init (void)
 			size_b0 = 1 << 20;
 		}
 		base_b0 = base_b1 - size_b0;
-		mtdcr (ebccfga, pb1cr);
-		pbcr = mfdcr (ebccfgd);
-		mtdcr (ebccfga, pb1cr);
+		mtdcr (EBC0_CFGADDR, PB1CR);
+		pbcr = mfdcr (EBC0_CFGDATA);
+		mtdcr (EBC0_CFGADDR, PB1CR);
 		pbcr = (pbcr & 0x0001ffff) | base_b0 | (calc_size(size_b0) << 17);
-		mtdcr (ebccfgd, pbcr);
+		mtdcr (EBC0_CFGDATA, pbcr);
 #if 0 /* test-only */
-		printf("size_b0=%x base_b0=%x pb0cr = %x\n",
+		printf("size_b0=%x base_b0=%x PB0CR = %x\n",
 		       size_b0, base_b0, pbcr); /* test-only */
 #endif
 	}