summaryrefslogtreecommitdiff
path: root/board/esd/cms700
diff options
context:
space:
mode:
authorMatthias Fuchs <matthias.fuchs@esd-electronics.com>2007-07-09 10:10:06 +0200
committerStefan Roese <sr@denx.de>2007-07-09 10:55:51 +0200
commitbd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803 (patch)
tree8fd60ad94c954e3fe5600dc77d3173677a0e6638 /board/esd/cms700
parente09f7ab5749c345f924da272bea0521a73af5b11 (diff)
downloadu-boot-imx-bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803.zip
u-boot-imx-bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803.tar.gz
u-boot-imx-bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803.tar.bz2
Migrate esd 405EP boards to new NAND subsystem
Migrate esd 405EP boards to new NAND subsystem -cleanup -use correct io accessors (in/out_be32()) Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Diffstat (limited to 'board/esd/cms700')
-rw-r--r--board/esd/cms700/Makefile5
-rw-r--r--board/esd/cms700/cms700.c39
2 files changed, 12 insertions, 32 deletions
diff --git a/board/esd/cms700/Makefile b/board/esd/cms700/Makefile
index df48766..0d4ab2d 100644
--- a/board/esd/cms700/Makefile
+++ b/board/esd/cms700/Makefile
@@ -33,7 +33,10 @@ CPLD = ../common/xilinx_jtag/lenval.o \
../common/xilinx_jtag/micro.o \
../common/xilinx_jtag/ports.o
-COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
+COBJS = $(BOARD).o flash.o \
+ ../common/misc.o \
+ $(CPLD) \
+ ../common/esd405ep_nand.o \
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
index cb04710..2cdd7be 100644
--- a/board/esd/cms700/cms700.c
+++ b/board/esd/cms700/cms700.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2005
+ * (C) Copyright 2005-2007
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
*
* See file CREDITS for list of people who contributed to this
@@ -23,6 +23,7 @@
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <command.h>
#include <malloc.h>
@@ -68,9 +69,9 @@ int board_early_init_f (void)
/*
* Reset CPLD via GPIO12 (CS3) pin
*/
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_PLD_RESET);
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_PLD_RESET);
udelay(1000); /* wait 1ms */
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_PLD_RESET);
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_PLD_RESET);
udelay(1000); /* wait 1ms */
return 0;
@@ -94,13 +95,7 @@ int misc_init_r (void)
/*
* Setup and enable EEPROM write protection
*/
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
-
- /*
- * Set NAND-FLASH GPIO signals to default
- */
- out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP);
return (0);
}
@@ -153,11 +148,6 @@ long int initdram (int board_type)
mtdcr(memcfga, mem_mb0cf);
val = mfdcr(memcfgd);
-#if 0
- printf("\nmb0cf=%x\n", val); /* test-only */
- printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
}
@@ -180,17 +170,17 @@ int eeprom_write_enable (unsigned dev_addr, int state)
switch (state) {
case 1:
/* Enable write access, clear bit GPIO_SINT2. */
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP);
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_EEPROM_WP);
state = 0;
break;
case 0:
/* Disable write access, set bit GPIO_SINT2. */
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP);
state = 0;
break;
default:
/* Read current status back. */
- state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP));
+ state = (0 == (in_be32((void *)GPIO0_OR) & CFG_EEPROM_WP));
break;
}
}
@@ -235,19 +225,6 @@ U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
/* ------------------------------------------------------------------------- */
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-#include <linux/mtd/nand_legacy.h>
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
-
-void nand_init(void)
-{
- nand_probe(CFG_NAND_BASE);
- if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
- print_size(nand_dev_desc[0].totlen, "\n");
- }
-}
-#endif
-
void reset_phy(void)
{
#ifdef CONFIG_LXT971_NO_SLEEP