summaryrefslogtreecommitdiff
path: root/board/esd/cms700/cms700.c
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2005-11-15 10:35:59 +0100
committerStefan Roese <sr@denx.de>2005-11-15 10:35:59 +0100
commitfeaedfcf84c92599c0b805f66cc8a628d82411f0 (patch)
tree82c6d3e4af8ce6e4745de86f1b401b6959056ef4 /board/esd/cms700/cms700.c
parent3ada834e30a0742991209140049035c626ccea85 (diff)
downloadu-boot-imx-feaedfcf84c92599c0b805f66cc8a628d82411f0.zip
u-boot-imx-feaedfcf84c92599c0b805f66cc8a628d82411f0.tar.gz
u-boot-imx-feaedfcf84c92599c0b805f66cc8a628d82411f0.tar.bz2
New PPC 405EP board added: CMS700
Added CONFIG_NET_MULTI for VOM405 board. Added reset_phy() for VOM405 board. Patch by Matthias Fuchs, 09 Nov 2005
Diffstat (limited to 'board/esd/cms700/cms700.c')
-rw-r--r--board/esd/cms700/cms700.c262
1 files changed, 262 insertions, 0 deletions
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
new file mode 100644
index 0000000..649619d
--- /dev/null
+++ b/board/esd/cms700/cms700.c
@@ -0,0 +1,262 @@
+/*
+ * (C) Copyright 2005
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <malloc.h>
+
+
+extern void lxt971_no_sleep(void);
+
+
+/* fpga configuration data - not compressed, generated by bin2c */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+int filesize = sizeof(fpgadata);
+
+
+int board_early_init_f (void)
+{
+ /*
+ * IRQ 0-15 405GP internally generated; active high; level sensitive
+ * IRQ 16 405GP internally generated; active low; level sensitive
+ * IRQ 17-24 RESERVED
+ * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+ * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
+ * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
+ * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
+ * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
+ * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
+ * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+ */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
+ mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
+ mtdcr(uictr, 0x10000000); /* set int trigger levels */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ /*
+ * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+ */
+ mtebc (epcr, 0xa8400000); /* ebc always driven */
+
+ /*
+ * Reset CPLD via GPIO12 (CS3) pin
+ */
+ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_PLD_RESET);
+ udelay(1000); /* wait 1ms */
+ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_PLD_RESET);
+ udelay(1000); /* wait 1ms */
+
+ return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+ return 0; /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* adjust flash start and offset */
+ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+ gd->bd->bi_flashoffset = 0;
+
+ /*
+ * Setup and enable EEPROM write protection
+ */
+ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
+
+ /*
+ * Set NAND-FLASH GPIO signals to default
+ */
+ out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
+
+ return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ unsigned char str[64];
+ int flashcnt;
+ int delay;
+ volatile unsigned char *led_reg = (unsigned char *)((ulong)CFG_PLD_BASE + 0x1000);
+ volatile unsigned char *ver_reg = (unsigned char *)((ulong)CFG_PLD_BASE + 0x1001);
+
+ puts ("Board: ");
+
+ if (getenv_r("serial#", str, sizeof(str)) == -1) {
+ puts ("### No HW ID - assuming CMS700");
+ } else {
+ puts(str);
+ }
+
+ printf(" (PLD-Version=%02d)\n", *ver_reg);
+
+ /*
+ * Flash LEDs
+ */
+ for (flashcnt = 0; flashcnt < 3; flashcnt++) {
+ *led_reg = 0x00; /* LEDs off */
+ for (delay = 0; delay < 100; delay++)
+ udelay(1000);
+ *led_reg = 0x0f; /* LEDs on */
+ for (delay = 0; delay < 50; delay++)
+ udelay(1000);
+ }
+ *led_reg = 0x70;
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ unsigned long val;
+
+ mtdcr(memcfga, mem_mb0cf);
+ val = mfdcr(memcfgd);
+
+#if 0
+ printf("\nmb0cf=%x\n", val); /* test-only */
+ printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+ return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CFG_EEPROM_WREN)
+/* Input: <dev_addr> I2C address of EEPROM device to enable.
+ * <state> -1: deliver current state
+ * 0: disable write
+ * 1: enable write
+ * Returns: -1: wrong device address
+ * 0: dis-/en- able done
+ * 0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable (unsigned dev_addr, int state)
+{
+ if (CFG_I2C_EEPROM_ADDR != dev_addr) {
+ return -1;
+ } else {
+ switch (state) {
+ case 1:
+ /* Enable write access, clear bit GPIO_SINT2. */
+ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP);
+ state = 0;
+ break;
+ case 0:
+ /* Disable write access, set bit GPIO_SINT2. */
+ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
+ state = 0;
+ break;
+ default:
+ /* Read current status back. */
+ state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP));
+ break;
+ }
+ }
+ return state;
+}
+
+int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int query = argc == 1;
+ int state = 0;
+
+ if (query) {
+ /* Query write access state. */
+ state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
+ if (state < 0) {
+ puts ("Query of write access state failed.\n");
+ } else {
+ printf ("Write access for device 0x%0x is %sabled.\n",
+ CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
+ state = 0;
+ }
+ } else {
+ if ('0' == argv[1][0]) {
+ /* Disable write access. */
+ state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
+ } else {
+ /* Enable write access. */
+ state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
+ }
+ if (state < 0) {
+ puts ("Setup of write access state failed.\n");
+ }
+ }
+
+ return state;
+}
+
+U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
+ "eepwren - Enable / disable / query EEPROM write access\n",
+ NULL);
+#endif /* #if defined(CFG_EEPROM_WREN) */
+
+/* ------------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#include <linux/mtd/nand.h>
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+
+void nand_init(void)
+{
+ nand_probe(CFG_NAND_BASE);
+ if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
+ print_size(nand_dev_desc[0].totlen, "\n");
+ }
+}
+#endif
+
+void reset_phy(void)
+{
+#ifdef CONFIG_LXT971_NO_SLEEP
+
+ /*
+ * Disable sleep mode in LXT971
+ */
+ lxt971_no_sleep();
+#endif
+}