Initial revision

1 files changed, 355 insertions, 0 deletions

diff --git a/board/eric/init.S b/board/eric/init.S
new file mode 100644
index 0000000..bdf90a5
--- /dev/null
+++ b/board/eric/init.S
@@ -0,0 +1,355 @@
+/*------------------------------------------------------------------------------+ */
+/* */
+/*       This source code has been made available to you by IBM on an AS-IS */
+/*       basis.  Anyone receiving this source is licensed under IBM */
+/*       copyrights to use it in any way he or she deems fit, including */
+/*       copying it, modifying it, compiling it, and redistributing it either */
+/*       with or without modifications.  No license under IBM patents or */
+/*       patent applications is to be implied by the copyright license. */
+/* */
+/*       Any user of this software should understand that IBM cannot provide */
+/*       technical support for this software and will not be responsible for */
+/*       any consequences resulting from the use of this software. */
+/* */
+/*       Any person who transfers this source code or any derivative work */
+/*       must include the IBM copyright notice, this paragraph, and the */
+/*       preceding two paragraphs in the transferred software. */
+/* */
+/*       COPYRIGHT   I B M   CORPORATION 1995 */
+/*       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M */
+/*------------------------------------------------------------------------------- */
+
+/*----------------------------------------------------------------------------- */
+/* Function:     ext_bus_cntlr_init */
+/* Description:  Initializes the External Bus Controller for the external */
+/*		peripherals. IMPORTANT: For pass1 this code must run from */
+/*		cache since you can not reliably change a peripheral banks */
+/*		timing register (pbxap) while running code from that bank. */
+/*		For ex., since we are running from ROM on bank 0, we can NOT */
+/*		execute the code that modifies bank 0 timings from ROM, so */
+/*		we run it from cache. */
+/* */
+/*----------------------------------------------------------------------------- */
+#include <config.h>
+#include <ppc4xx.h>
+
+#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+
+     	.globl	ext_bus_cntlr_init
+ext_bus_cntlr_init:
+        mflr    r4                      /* save link register */
+        bl      ..getAddr
+..getAddr:
+        mflr    r3                      /* get address of ..getAddr */
+        mtlr    r4                      /* restore link register */
+        addi    r4,0,14                 /* set ctr to 10; used to prefetch */
+        mtctr   r4                      /* 10 cache lines to fit this function */
+                                        /* in cache (gives us 8x10=80 instrctns) */
+..ebcloop:
+        icbt    r0,r3                   /* prefetch cache line for addr in r3 */
+        addi    r3,r3,32		/* move to next cache line */
+        bdnz    ..ebcloop               /* continue for 10 cache lines */
+
+        /*------------------------------------------------------------------- */
+        /* Delay to ensure all accesses to ROM are complete before changing */
+	/* bank 0 timings. 200usec should be enough. */
+        /*   200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+        /*------------------------------------------------------------------- */
+	addis	r3,0,0x0
+        ori     r3,r3,0xA000          /* ensure 200usec have passed since reset */
+        mtctr   r3
+..spinlp:
+        bdnz    ..spinlp                /* spin loop */
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 0 (Flash) initialization (from openbios) */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb0ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS0_AP@h
+        ori     r4,r4,CS0_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb0cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS0_CR@h
+        ori     r4,r4,CS0_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 1 (NVRAM/RTC) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb1ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS1_AP@h
+        ori     r4,r4,CS1_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb1cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS1_CR@h
+        ori     r4,r4,CS1_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 2 (A/D converter) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb2ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS2_AP@h
+        ori     r4,r4,CS2_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb2cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS2_CR@h
+        ori     r4,r4,CS2_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 3 (Ethernet PHY Reset) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb3ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS3_AP@h
+        ori     r4,r4,CS3_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb3cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS3_CR@h
+        ori     r4,r4,CS3_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 4 (PC-MIP PRSNT1#) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb4ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS4_AP@h
+        ori     r4,r4,CS4_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb4cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS4_CR@h
+        ori     r4,r4,CS4_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 5 (PC-MIP PRSNT2#) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb5ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS5_AP@h
+        ori     r4,r4,CS5_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb5cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS5_CR@h
+        ori     r4,r4,CS5_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 6 (CPU LED0) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb6ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS6_AP@h
+        ori     r4,r4,CS6_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb6cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS6_CR@h
+        ori     r4,r4,CS5_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 7 (CPU LED1) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb7ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS7_AP@h
+        ori     r4,r4,CS7_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb7cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS7_CR@h
+        ori     r4,r4,CS7_CR@l
+        mtdcr   ebccfgd,r4
+
+/*	addis   r4,r0,FPGA_BRDC@h */
+/*        ori     r4,r4,FPGA_BRDC@l */
+/*        lbz     r3,0(r4)                //get FPGA board control reg */
+/*        eieio */
+/*        ori	r3,r3,0x01              //set UART1 control to select CTS/RTS */
+/*	stb     r3,0(r4) */
+
+	nop				/* pass2 DCR errata #8 */
+        blr
+
+/*----------------------------------------------------------------------------- */
+/* Function:     sdram_init */
+/* Description:  Configures SDRAM memory banks on ERIC. */
+/*               We do manually init our SDRAM. */
+/*               If we have two SDRAM banks, simply undef SINGLE_BANK (ROLF :-) */
+/*		 It is assumed that a 32MB 12x8(2) SDRAM is used. */
+/*----------------------------------------------------------------------------- */
+        .globl  sdram_init
+
+sdram_init:
+
+	mflr	r31
+
+#ifdef CFG_SDRAM_MANUALLY
+        /*------------------------------------------------------------------- */
+        /* Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2) */
+        /*------------------------------------------------------------------- */
+
+        addi    r4,0,mem_mb0cf
+        mtdcr   memcfga,r4
+        addis   r4,0,MB0CF@h
+        ori     r4,r4,MB0CF@l
+        mtdcr   memcfgd,r4
+
+        /*------------------------------------------------------------------- */
+        /* Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2) */
+        /*------------------------------------------------------------------- */
+
+        addi    r4,0,mem_mb1cf
+        mtdcr   memcfga,r4
+        addis   r4,0,MB1CF@h
+        ori     r4,r4,MB1CF@l
+        mtdcr   memcfgd,r4
+
+        /*------------------------------------------------------------------- */
+        /* Set MB2CF for bank 2. off */
+        /*------------------------------------------------------------------- */
+
+        addi    r4,0,mem_mb2cf
+        mtdcr   memcfga,r4
+        addis   r4,0,MB2CF@h
+        ori     r4,r4,MB2CF@l
+        mtdcr   memcfgd,r4
+
+        /*------------------------------------------------------------------- */
+        /* Set MB3CF for bank 3. off */
+        /*------------------------------------------------------------------- */
+
+        addi    r4,0,mem_mb3cf
+        mtdcr   memcfga,r4
+        addis   r4,0,MB3CF@h
+        ori     r4,r4,MB3CF@l
+        mtdcr   memcfgd,r4
+
+        /*------------------------------------------------------------------- */
+        /* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR. */
+        /* To set the appropriate timings, we need to know the SDRAM speed. */
+	/* We can use the PLB speed since the SDRAM speed is the same as */
+	/* the PLB speed. The PLB speed is the FBK divider times the */
+	/* 405GP reference clock, which on the Walnut board is 33Mhz. */
+	/* Thus, if FBK div is 2, SDRAM is 66Mhz; if FBK div is 3, SDRAM is */
+	/* 100Mhz; if FBK is 3, SDRAM is 133Mhz. */
+	/* NOTE: The Walnut board supports SDRAM speeds of 66Mhz, 100Mhz, and */
+	/* maybe 133Mhz. */
+        /*------------------------------------------------------------------- */
+
+        mfdcr   r5,strap                 /* determine FBK divider */
+                                          /* via STRAP reg to calc PLB speed. */
+                                          /* SDRAM speed is the same as the PLB */
+				          /* speed. */
+        rlwinm  r4,r5,4,0x3             /* get FBK divide bits */
+
+..chk_66:
+        cmpi    %cr0,0,r4,0x1
+        bne     ..chk_100
+	addis	r6,0,SDTR_66@h		/* SDTR1 value for 66Mhz */
+	ori     r6,r6,SDTR_66@l
+	addis	r7,0,RTR_66		/* RTR value for 66Mhz */
+        b	..sdram_ok
+..chk_100:
+        cmpi    %cr0,0,r4,0x2
+        bne     ..chk_133
+        addis   r6,0,SDTR_100@h        /* SDTR1 value for 100Mhz */
+        ori     r6,r6,SDTR_100@l
+        addis   r7,0,RTR_100           /* RTR value for 100Mhz */
+        b       ..sdram_ok
+..chk_133:
+        addis   r6,0,0x0107            /* SDTR1 value for 133Mhz */
+        ori     r6,r6,0x4015
+        addis   r7,0,0x07F0            /* RTR value for 133Mhz */
+
+..sdram_ok:
+        /*------------------------------------------------------------------- */
+        /* Set SDTR1 */
+        /*------------------------------------------------------------------- */
+        addi    r4,0,mem_sdtr1
+        mtdcr   memcfga,r4
+        mtdcr   memcfgd,r6
+
+        /*------------------------------------------------------------------- */
+        /* Set RTR */
+        /*------------------------------------------------------------------- */
+        addi    r4,0,mem_rtr
+        mtdcr   memcfga,r4
+        mtdcr   memcfgd,r7
+
+        /*------------------------------------------------------------------- */
+        /* Delay to ensure 200usec have elapsed since reset. Assume worst */
+        /* case that the core is running 200Mhz: */
+        /*   200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+        /*------------------------------------------------------------------- */
+        addis   r3,0,0x0000
+        ori     r3,r3,0xA000          /* ensure 200usec have passed since reset */
+        mtctr   r3
+..spinlp2:
+        bdnz    ..spinlp2               /* spin loop */
+
+        /*------------------------------------------------------------------- */
+        /* Set memory controller options reg, MCOPT1. */
+	/* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */
+	/* read/prefetch. */
+        /*------------------------------------------------------------------- */
+        addi    r4,0,mem_mcopt1
+        mtdcr   memcfga,r4
+        addis   r4,0,0x8080             /* set DC_EN=1 */
+        ori     r4,r4,0x0000
+        mtdcr   memcfgd,r4
+
+        /*------------------------------------------------------------------- */
+        /* Delay to ensure 10msec have elapsed since reset. This is */
+        /* required for the MPC952 to stabalize. Assume worst */
+        /* case that the core is running 200Mhz: */
+        /*   200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */
+        /* This delay should occur before accessing SDRAM. */
+        /*------------------------------------------------------------------- */
+        addis   r3,0,0x001E
+        ori     r3,r3,0x8480          /* ensure 10msec have passed since reset */
+        mtctr   r3
+..spinlp3:
+        bdnz    ..spinlp3                /* spin loop */
+
+#else
+/*fixme: do SDRAM Autoconfig from EEPROM here */
+
+#endif
+        mtlr    r31                     /* restore lr */
+        blr