summaryrefslogtreecommitdiff
path: root/board/eric/eric.c
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-08-26 21:58:50 +0000
committerwdenk <wdenk>2002-08-26 21:58:50 +0000
commit16f217049a70da97bc61eff7a95b4b6313850909 (patch)
tree4c9c0b416828b4215b10d152aac432b449a11f05 /board/eric/eric.c
parent354bc6feac2cf549c51c2f36e2a374438af4e9c1 (diff)
downloadu-boot-imx-16f217049a70da97bc61eff7a95b4b6313850909.zip
u-boot-imx-16f217049a70da97bc61eff7a95b4b6313850909.tar.gz
u-boot-imx-16f217049a70da97bc61eff7a95b4b6313850909.tar.bz2
Initial revision
Diffstat (limited to 'board/eric/eric.c')
-rw-r--r--board/eric/eric.c195
1 files changed, 195 insertions, 0 deletions
diff --git a/board/eric/eric.c b/board/eric/eric.c
new file mode 100644
index 0000000..17fe6ac
--- /dev/null
+++ b/board/eric/eric.c
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include "eric.h"
+#include <asm/processor.h>
+
+#define IBM405GP_GPIO0_OR 0xef600700 /* GPIO Output */
+#define IBM405GP_GPIO0_TCR 0xef600704 /* GPIO Three-State Control */
+#define IBM405GP_GPIO0_ODR 0xef600718 /* GPIO Open Drain */
+#define IBM405GP_GPIO0_IR 0xef60071c /* GPIO Input */
+
+int board_pre_init (void)
+{
+
+ /*-------------------------------------------------------------------------+
+ | Interrupt controller setup for the ERIC board.
+ | Note: IRQ 0-15 405GP internally generated; active high; level sensitive
+ | IRQ 16 405GP internally generated; active low; level sensitive
+ | IRQ 17-24 RESERVED
+ | IRQ 25 (EXT IRQ 0) FLASH; active low; level sensitive
+ | IRQ 26 (EXT IRQ 1) PHY ; active low; level sensitive
+ | IRQ 27 (EXT IRQ 2) HOST FAIL, active low; level sensitive
+ | indicates NO Power or HOST RESET active
+ | check GPIO7 (HOST RESET#) and GPIO8 (NO Power#)
+ | for real IRQ source
+ | IRQ 28 (EXT IRQ 3) HOST; active high; level sensitive
+ | IRQ 29 (EXT IRQ 4) PCI INTC#; active low; level sensitive
+ | IRQ 30 (EXT IRQ 5) PCI INTB#; active low; level sensitive
+ | IRQ 31 (EXT IRQ 6) PCI INTA#; active low; level sensitive
+ | -> IRQ6 Pin is NOW GPIO23 and can be activateted by setting
+ | IBM405GP_GPIO0_TCR Bit 0 = 1 (driving the output as defined in IBM405GP_GPIO0_OR,
+ | else tristate)
+ | Note for ERIC board:
+ | An interrupt taken for the HOST (IRQ 28) indicates that
+ | the HOST wrote a "1" to one of the following locations
+ | - VGA CRT_GPIO0 (if R1216 is loaded)
+ | - VGA CRT_GPIO1 (if R1217 is loaded)
+ |
+ +-------------------------------------------------------------------------*/
+
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (uicer, 0x00000000); /* disable all ints */
+ mtdcr (uiccr, 0x00000000); /* set all SMI to be non-critical */
+ mtdcr (uicpr, 0xFFFFFF88); /* set int polarities; IRQ3 to 1 */
+ mtdcr (uictr, 0x10000000); /* set int trigger levels, UART0 is EDGE */
+ mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ mtdcr (cntrl0, 0x00002000); /* set IRQ6 as GPIO23 to generate an interrupt request to the PCP2PCI bridge */
+
+ out32 (IBM405GP_GPIO0_OR, 0x60000000); /*fixme is SMB_INT high or low active??; IRQ6 is GPIO23 output */
+ out32 (IBM405GP_GPIO0_TCR, 0x7E400000);
+
+ return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ unsigned char *s = getenv ("serial#");
+ unsigned char *e;
+
+ puts ("Board: ");
+
+ if (!s || strncmp (s, "ERIC", 9)) {
+ puts ("### No HW ID - assuming ERIC");
+ } else {
+ for (e = s; *e; ++e) {
+ if (*e == ' ')
+ break;
+ }
+
+ for (; s < e; ++s) {
+ putc (*s);
+ }
+ }
+
+
+ putc ('\n');
+
+ return (0);
+}
+
+
+/* ------------------------------------------------------------------------- */
+/* ------------------------------------------------------------------------- */
+/* ------------------------------------------------------------------------- */
+/*
+ initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
+ the necessary info for SDRAM controller configuration
+*/
+/* ------------------------------------------------------------------------- */
+/* ------------------------------------------------------------------------- */
+long int initdram (int board_type)
+{
+#ifndef CONFIG_ERIC
+ int i;
+ unsigned char datain[128];
+ int TotalSize;
+#endif
+
+
+#ifdef CONFIG_ERIC
+ /*
+ * we have no EEPROM on ERIC
+ * so let init.S do the init job for SDRAM
+ * and simply return 32MByte here
+ */
+ return (CFG_SDRAM_SIZE * 1024 * 1024);
+#else
+
+ /* Read Serial Presence Detect Information */
+ for (i = 0; i < 128; i++)
+ datain[i] = 127;
+ i2c_send (SPD_EEPROM_ADDRESS, 0, 1, datain, 128);
+ printf ("\nReading DIMM...\n");
+#if 0
+ for (i = 0; i < 128; i++) {
+ printf ("%d=0x%x ", i, datain[i]);
+ if (((i + 1) % 10) == 0)
+ printf ("\n");
+ }
+ printf ("\n");
+#endif
+
+ /*****************************/
+ /* Retrieve interesting data */
+ /*****************************/
+ /* size of a SDRAM bank */
+ /* Number of bytes per side / number of banks per side */
+ if (datain[31] == 0x08)
+ TotalSize = 32;
+ else if (datain[31] == 0x10)
+ TotalSize = 64;
+ else {
+ printf ("IIC READ ERROR!!!\n");
+ TotalSize = 32;
+ }
+
+ /* single-sided DIMM or double-sided DIMM? */
+ if (datain[5] != 1) {
+ /* double-sided DIMM => SDRAM banks 0..3 are valid */
+ printf ("double-sided DIMM\n");
+ TotalSize *= 2;
+ }
+ /* else single-sided DIMM => SDRAM bank 0 and bank 2 are valid */
+ else {
+ printf ("single-sided DIMM\n");
+ }
+
+
+ /* return size in Mb unit => *(1024*1024) */
+ return (TotalSize * 1024 * 1024);
+#endif
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+ /* TODO: XXX XXX XXX */
+ printf ("test: xxx MB - ok\n");
+
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */