Merge git://git.denx.de/u-boot into x1

Conflicts:

	drivers/usb/usb_ohci.c

3 files changed, 17 insertions, 17 deletions

diff --git a/board/delta/delta.c b/board/delta/delta.c
index 6e22774..878416f 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -304,8 +304,8 @@ static void init_DA9030()
 	GPCR0 = (1<<17);	/* drive GPIO17 low */
 	GPSR0 = (1<<17);	/* drive GPIO17 high */
 
-#if CFG_DA9030_EXTON_DELAY
-	udelay((unsigned long) CFG_DA9030_EXTON_DELAY);	/* wait for DA9030 */
+#if CONFIG_SYS_DA9030_EXTON_DELAY
+	udelay((unsigned long) CONFIG_SYS_DA9030_EXTON_DELAY);	/* wait for DA9030 */
 #endif
 	GPCR0 = (1<<17);	/* drive GPIO17 low */
 
diff --git a/board/delta/lowlevel_init.S b/board/delta/lowlevel_init.S
index f059db5..eef6318 100644
--- a/board/delta/lowlevel_init.S
+++ b/board/delta/lowlevel_init.S
@@ -24,7 +24,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 .macro wait time
 	ldr		r2, =OSCR
@@ -108,10 +108,10 @@ mem_init:
 	orr		r1, r1, #MDCNFG_DMCEN
 	str		r1, [r0]
 
-#ifndef CFG_SKIP_DRAM_SCRUB
+#ifndef CONFIG_SYS_SKIP_DRAM_SCRUB
 	/* scrub/init SDRAM if enabled/present */
-	ldr	r8, =CFG_DRAM_BASE	/* base address of SDRAM (CFG_DRAM_BASE) */
-	ldr	r9, =CFG_DRAM_SIZE	/* size of memory to scrub (CFG_DRAM_SIZE) */
+	ldr	r8, =CONFIG_SYS_DRAM_BASE	/* base address of SDRAM (CONFIG_SYS_DRAM_BASE) */
+	ldr	r9, =CONFIG_SYS_DRAM_SIZE	/* size of memory to scrub (CONFIG_SYS_DRAM_SIZE) */
 	mov	r0, #0			/* scrub with 0x0000:0000 */
 	mov	r1, #0
 	mov	r2, #0
@@ -125,7 +125,7 @@ mem_init:
 	stmia	r8!, {r0-r7}
 	beq	15f
 	b	10b
-#endif /* CFG_SKIP_DRAM_SCRUB */
+#endif /* CONFIG_SYS_SKIP_DRAM_SCRUB */
 
 15:
 	/* Mask all interrupts */
diff --git a/board/delta/nand.c b/board/delta/nand.c
index ceb798b..14382f5 100644
--- a/board/delta/nand.c
+++ b/board/delta/nand.c
@@ -28,19 +28,19 @@
 #include <nand.h>
 #include <asm/arch/pxa-regs.h>
 
-#ifdef CFG_DFC_DEBUG1
+#ifdef CONFIG_SYS_DFC_DEBUG1
 # define DFC_DEBUG1(fmt, args...) printf(fmt, ##args)
 #else
 # define DFC_DEBUG1(fmt, args...)
 #endif
 
-#ifdef CFG_DFC_DEBUG2
+#ifdef CONFIG_SYS_DFC_DEBUG2
 # define DFC_DEBUG2(fmt, args...) printf(fmt, ##args)
 #else
 # define DFC_DEBUG2(fmt, args...)
 #endif
 
-#ifdef CFG_DFC_DEBUG3
+#ifdef CONFIG_SYS_DFC_DEBUG3
 # define DFC_DEBUG3(fmt, args...) printf(fmt, ##args)
 #else
 # define DFC_DEBUG3(fmt, args...)
@@ -206,7 +206,7 @@ static void wait_us(unsigned long us)
 static void dfc_clear_nddb(void)
 {
 	NDCR &= ~NDCR_ND_RUN;
-	wait_us(CFG_NAND_OTHER_TO);
+	wait_us(CONFIG_SYS_NAND_OTHER_TO);
 }
 
 /* wait_event with timeout */
@@ -217,9 +217,9 @@ static unsigned long dfc_wait_event(unsigned long event)
 	if(!event)
 		return 0xff000000;
 	else if(event & (NDSR_CS0_CMDD | NDSR_CS0_BBD))
-		timeout = CFG_NAND_PROG_ERASE_TO * OSCR_CLK_FREQ;
+		timeout = CONFIG_SYS_NAND_PROG_ERASE_TO * OSCR_CLK_FREQ;
 	else
-		timeout = CFG_NAND_OTHER_TO * OSCR_CLK_FREQ;
+		timeout = CONFIG_SYS_NAND_OTHER_TO * OSCR_CLK_FREQ;
 
 	while(1) {
 		ndsr = NDSR;
@@ -242,7 +242,7 @@ static void dfc_new_cmd(void)
 	int retry = 0;
 	unsigned long status;
 
-	while(retry++ <= CFG_NAND_SENDCMD_RETRY) {
+	while(retry++ <= CONFIG_SYS_NAND_SENDCMD_RETRY) {
 		/* Clear NDSR */
 		NDSR = 0xFFF;
 
@@ -433,8 +433,8 @@ int board_nand_init(struct nand_chip *nand)
 	/* turn on the NAND Controller Clock (104 MHz @ D0) */
 	CKENA |= (CKENA_4_NAND | CKENA_9_SMC);
 
-#undef CFG_TIMING_TIGHT
-#ifndef CFG_TIMING_TIGHT
+#undef CONFIG_SYS_TIMING_TIGHT
+#ifndef CONFIG_SYS_TIMING_TIGHT
 	tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1),
 		  DFC_MAX_tCH);
 	tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US) + 1),
@@ -473,7 +473,7 @@ int board_nand_init(struct nand_chip *nand)
 		   DFC_MAX_tWHR);
 	tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) - 2),
 		  DFC_MAX_tAR);
-#endif /* CFG_TIMING_TIGHT */
+#endif /* CONFIG_SYS_TIMING_TIGHT */
 
 
 	DFC_DEBUG2("tCH=%u, tCS=%u, tWH=%u, tWP=%u, tRH=%u, tRP=%u, tR=%u, tWHR=%u, tAR=%u.\n", tCH, tCS, tWH, tWP, tRH, tRP, tR, tWHR, tAR);