Merge branch 'master' of rsync://rsync.denx.de/git/u-boot

1 files changed, 85 insertions, 4 deletions

diff --git a/board/delta/delta.c b/board/delta/delta.c
index 3ffcc2a..b7671dd 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -26,9 +26,15 @@
  */
 
 #include <common.h>
+#include <i2c.h>
+#include <da9030.h>
+#include <asm/arch/pxa-regs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
 
 /* ------------------------------------------------------------------------- */
 
+static void init_DA9030(void);
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -36,8 +42,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
@@ -54,14 +58,13 @@ int board_late_init(void)
 {
 	setenv("stdout", "serial");
 	setenv("stderr", "serial");
+	init_DA9030();
 	return 0;
 }
 
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
@@ -73,3 +76,81 @@ int dram_init (void)
 
 	return 0;
 }
+
+void i2c_init_board()
+{
+	CKENB |= (CKENB_4_I2C);
+
+	/* setup I2C GPIO's */
+	GPIO32 = 0x801;		/* SCL = Alt. Fkt. 1 */
+	GPIO33 = 0x801;		/* SDA = Alt. Fkt. 1 */
+}
+
+/* initialize the DA9030 Power Controller */
+static void init_DA9030()
+{
+	uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
+
+	CKENB |= CKENB_7_GPIO;
+	udelay(100);
+
+	/* Rising Edge on EXTON to reset DA9030 */
+	GPIO17 = 0x8800;	/* configure GPIO17, no pullup, -down */
+	GPDR0 |= (1<<17);	/* GPIO17 is output */
+	GSDR0 = (1<<17);
+	GPCR0 = (1<<17);	/* drive GPIO17 low */
+	GPSR0 = (1<<17);	/* drive GPIO17 high */
+
+#if CFG_DA9030_EXTON_DELAY
+	udelay((unsigned long) CFG_DA9030_EXTON_DELAY);	/* wait for DA9030 */
+#endif
+	GPCR0 = (1<<17);	/* drive GPIO17 low */
+
+	/* reset the watchdog and go active (0xec) */
+	val = (SYS_CONTROL_A_HWRES_ENABLE |
+	       (0x6<<4) |
+	       SYS_CONTROL_A_WDOG_ACTION |
+	       SYS_CONTROL_A_WATCHDOG);
+	if(i2c_write(addr, SYS_CONTROL_A, 1, &val, 1)) {
+		printf("Error accessing DA9030 via i2c.\n");
+		return;
+	}
+
+	i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */
+	i2c_reg_write(addr, LDO2_3, 0xd1);	/* LDO2 =1,9V, LDO3=3,1V */
+	i2c_reg_write(addr, LDO4_5, 0xcc);	/* LDO2 =1,9V, LDO3=3,1V */
+	i2c_reg_write(addr, LDO6_SIMCP, 0x3e);	/* LDO6=3,2V, SIMCP = 5V support */
+	i2c_reg_write(addr, LDO7_8, 0xc9);	/* LDO7=2,7V, LDO8=3,0V */
+	i2c_reg_write(addr, LDO9_12, 0xec);	/* LDO9=3,0V, LDO12=3,2V */
+	i2c_reg_write(addr, BUCK, 0x0c);	/* Buck=1.2V */
+	i2c_reg_write(addr, REG_CONTROL_2_98, 0x7f); /* All LDO'S on 8,9,10,11,12,14 */
+	i2c_reg_write(addr, LDO_10_11, 0xcc);	/* LDO10=3.0V  LDO11=3.0V */
+	i2c_reg_write(addr, LDO_15, 0xae);	/* LDO15=1.8V, dislock first 3bit */
+	i2c_reg_write(addr, LDO_14_16, 0x05);	/* LDO14=2.8V, LDO16=NB */
+	i2c_reg_write(addr, LDO_18_19, 0x9c);	/* LDO18=3.0V, LDO19=2.7V */
+	i2c_reg_write(addr, LDO_17_SIMCP0, 0x2c); /* LDO17=3.0V, SIMCP=3V support */
+	i2c_reg_write(addr, BUCK2_DVC1, 0x9a);	/* Buck2=1.5V plus Update support of 520 MHz */
+	i2c_reg_write(addr, REG_CONTROL_2_18, 0x43); /* Ball on */
+	i2c_reg_write(addr, MISC_CONTROLB, 0x08); /* session valid enable */
+	i2c_reg_write(addr, USBPUMP, 0xc1);	/* start pump, ignore HW signals */
+
+	val = i2c_reg_read(addr, STATUS);
+	if(val & STATUS_CHDET)
+		printf("Charger detected, turning on LED.\n");
+	else {
+		printf("No charger detetected.\n");
+		/* undervoltage? print error and power down */
+	}
+}
+
+
+#if 0
+/* reset the DA9030 watchdog */
+void hw_watchdog_reset(void)
+{
+	uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
+	val = i2c_reg_read(addr, SYS_CONTROL_A);
+	val |= SYS_CONTROL_A_WATCHDOG;
+	i2c_reg_write(addr, SYS_CONTROL_A, val);
+}
+#endif