summaryrefslogtreecommitdiff
path: root/board/dbau1x00
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-12-07 18:32:37 +0000
committerwdenk <wdenk>2003-12-07 18:32:37 +0000
commita2663ea4fc9d18cb8000c97ed92c3c668eda8e04 (patch)
tree9eb328b497d6f482e5571635fa00b1d0cae5b185 /board/dbau1x00
parentef5a9672c778e22ecb522db625b5df78ea40ed23 (diff)
downloadu-boot-imx-a2663ea4fc9d18cb8000c97ed92c3c668eda8e04.zip
u-boot-imx-a2663ea4fc9d18cb8000c97ed92c3c668eda8e04.tar.gz
u-boot-imx-a2663ea4fc9d18cb8000c97ed92c3c668eda8e04.tar.bz2
* Patches by David Müller, 14 Nov 2003:
- board/mpl/common/common_util.c * implement support for BZIP2 compressed images * various cleanups (printf -> puts, ...) - board/mpl/common/flash.c * report correct errors to upper layers * check the erase fail and VPP low bits in status reg - board/mpl/vcma9/cmd_vcma9.c - board/mpl/vcma9/flash.c * various cleanups (printf -> puts, ...) - common/cmd_usb.c * fix typo in comment - cpu/arm920t/usb_ohci.c * support for S3C2410 is missing in #if line - drivers/cs8900.c * reinit some registers in case of error (cable missing, ...) - fs/fat/fat.c * support for USB/MMC devices is missing in #if line - include/configs/MIP405.h - include/configs/PIP405.h * enable BZIP2 support * enlarge malloc space to 1MiB because of BZIP2 support - include/configs/VCMA9.h * enable BZIP2 support * enlarge malloc space to 1MiB because of BZIP2 support * enable USB support - lib_arm/armlinux.c * change calling convention of ARM Linux kernel as described on http://www.arm.linux.org.uk/developer/booting.php * Patch by Thomas Lange, 14 Nov 2003: Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to support all these AMD boards. * Patch by Thomas Lange, 14 Nov 2003: Workaround for mips au1x00 physical memory accesses (the au1x00 uses a 36 bit bus internally and cannot access physical memory directly. Use the uncached SDRAM address instead of the physical one.)
Diffstat (limited to 'board/dbau1x00')
-rw-r--r--board/dbau1x00/dbau1x00.c29
1 files changed, 23 insertions, 6 deletions
diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c
index 3b6fcec..8fcbd81 100644
--- a/board/dbau1x00/dbau1x00.c
+++ b/board/dbau1x00/dbau1x00.c
@@ -39,6 +39,13 @@ long int initdram(int board_type)
/* In cpu/mips/cpu.c */
void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 );
+#ifdef CONFIG_DBAU1100
+#warning "FIXME Check that bcsr is the same as dbau1000 board!"
+#endif
+#ifdef CONFIG_DBAU1500
+#warning "FIXME Check that bcsr is the same as dbau1000 board!"
+#endif
+
int checkboard (void)
{
u16 status;
@@ -51,14 +58,24 @@ int checkboard (void)
proc_id = read_32bit_cp0_register(CP0_PRID);
- switch(proc_id>>24){
+ switch (proc_id >> 24) {
case 0:
- puts("Board: Merlot (DbAu1000)\n");
- printf("CPU: Au1000 396 MHz, id: 0x%02x, rev: 0x%02x\n",
- (proc_id>>8)&0xFF,proc_id&0xFF);
- break;
+ puts ("Board: Merlot (DbAu1000)\n");
+ printf ("CPU: Au1000 396 MHz, id: 0x%02x, rev: 0x%02x\n",
+ (proc_id >> 8) & 0xFF, proc_id & 0xFF);
+ break;
+ case 1:
+ puts ("Board: DbAu1500\n");
+ printf ("CPU: Au1500, id: 0x%02x, rev: 0x%02x\n",
+ (proc_id >> 8) & 0xFF, proc_id & 0xFF);
+ break;
+ case 2:
+ puts ("Board: DbAu1100\n");
+ printf ("CPU: Au1100, id: 0x%02x, rev: 0x%02x\n",
+ (proc_id >> 8) & 0xFF, proc_id & 0xFF);
+ break;
default:
- printf("Unsupported cpu %d, proc_id=0x%x\n",proc_id>>24,proc_id);
+ printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
}
#ifdef CONFIG_IDE_PCMCIA
/* Enable 3.3 V on slot 0 ( VCC )