summaryrefslogtreecommitdiff
path: root/board/davinci/ea20
diff options
context:
space:
mode:
authorBastian Ruppert <Bastian.Ruppert@Sewerin.de>2011-10-04 23:43:34 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2011-11-03 22:56:26 +0100
commit8540b1691981bf68cb063367a595c7985afd3c49 (patch)
tree52f6d3a5253728aa4e6ab86ee1f4b9b0351ccdaa /board/davinci/ea20
parente5ee9125ecff23f337f26834c07a1f0252378818 (diff)
downloadu-boot-imx-8540b1691981bf68cb063367a595c7985afd3c49.zip
u-boot-imx-8540b1691981bf68cb063367a595c7985afd3c49.tar.gz
u-boot-imx-8540b1691981bf68cb063367a595c7985afd3c49.tar.bz2
Davinci: ea20: add gpios for LCD backlight control
Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de> CC: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Diffstat (limited to 'board/davinci/ea20')
-rw-r--r--board/davinci/ea20/ea20.c14
1 files changed, 13 insertions, 1 deletions
diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c
index 1a57baf..c28d8df 100644
--- a/board/davinci/ea20/ea20.c
+++ b/board/davinci/ea20/ea20.c
@@ -95,7 +95,9 @@ const struct pinmux_config nand_pins[] = {
const struct pinmux_config gpio_pins[] = {
{ pinmux(13), 8, 0 }, /* GPIO6[15] RESETOUTn on SOM*/
{ pinmux(13), 8, 5 }, /* GPIO6[10] U0_SW0 on EA20-00101_2*/
- { pinmux(13), 8, 3 } /* GPIO6[12] U0_SW1 on EA20-00101_2*/
+ { pinmux(13), 8, 3 }, /* GPIO6[12] U0_SW1 on EA20-00101_2*/
+ { pinmux(19), 8, 5 }, /* GPIO6[1] DISP_ON */
+ { pinmux(14), 8, 1 } /* GPIO6[6] LCD_B_PWR*/
};
const struct pinmux_config halten_pin[] = {
@@ -144,6 +146,16 @@ int board_early_init_f(void)
&gpio6_base->set_data);
writel((readl(&gpio6_base->dir) & ~(1 << 12)), &gpio6_base->dir);
+ /* Set LCD_B_PWR low to power down LCD Backlight*/
+ writel((readl(&gpio6_base->set_data) & ~(1 << 6)),
+ &gpio6_base->set_data);
+ writel((readl(&gpio6_base->dir) & ~(1 << 6)), &gpio6_base->dir);
+
+ /* Set DISP_ON low to disable LCD output*/
+ writel((readl(&gpio6_base->set_data) & ~(1 << 1)),
+ &gpio6_base->set_data);
+ writel((readl(&gpio6_base->dir) & ~(1 << 1)), &gpio6_base->dir);
+
#ifndef CONFIG_USE_IRQ
irq_init();
#endif