diff options
| author | Bastian Ruppert <Bastian.Ruppert@Sewerin.de> | 2011-10-04 23:43:29 +0000 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2011-11-03 22:56:25 +0100 |
| commit | ca1646b85d5d2be0ab524190875e6208f61ae8c6 (patch) | |
| tree | 5051f1d3efed119754117a7a7c62fb4d456f2f90 /board/davinci/ea20/ea20.c | |
| parent | f9fc237f1f07d4e5ff7c9c2da39cabc8d3d7b339 (diff) | |
| download | u-boot-imx-ca1646b85d5d2be0ab524190875e6208f61ae8c6.zip u-boot-imx-ca1646b85d5d2be0ab524190875e6208f61ae8c6.tar.gz u-boot-imx-ca1646b85d5d2be0ab524190875e6208f61ae8c6.tar.bz2 | |
Davinci: ea20: set GPIOs to hold MII-Phy in reset and set UART0-Switch for console
Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: dzu@denx.de
CC: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Diffstat (limited to 'board/davinci/ea20/ea20.c')
| -rw-r--r-- | board/davinci/ea20/ea20.c | 30 |
1 files changed, 29 insertions, 1 deletions
diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c index 4e4107a..3b636ff 100644 --- a/board/davinci/ea20/ea20.c +++ b/board/davinci/ea20/ea20.c @@ -35,6 +35,7 @@ #include <asm/arch/emac_defs.h> #include <asm/io.h> #include <asm/arch/davinci_misc.h> +#include <asm/arch/gpio.h> DECLARE_GLOBAL_DATA_PTR; @@ -90,6 +91,12 @@ const struct pinmux_config nand_pins[] = { }; #endif +const struct pinmux_config gpio_pins[] = { + { pinmux(13), 8, 0 }, /* GPIO6[15] RESETOUTn on SOM*/ + { pinmux(13), 8, 5 }, /* GPIO6[10] U0_SW0 on EA20-00101_2*/ + { pinmux(13), 8, 3 } /* GPIO6[12] U0_SW1 on EA20-00101_2*/ +}; + static const struct pinmux_resource pinmuxes[] = { #ifdef CONFIG_SPI_FLASH PINMUX_ITEM(spi1_pins), @@ -110,11 +117,32 @@ static const struct lpsc_resource lpsc[] = { int board_init(void) { + struct davinci_gpio *gpio6_base = + (struct davinci_gpio *)DAVINCI_GPIO_BANK67; + + /* PinMux for GPIO */ + if (davinci_configure_pin_mux(gpio_pins, ARRAY_SIZE(gpio_pins)) != 0) + return 1; + + /* Set the RESETOUTn low */ + writel((readl(&gpio6_base->set_data) & ~(1 << 15)), + &gpio6_base->set_data); + writel((readl(&gpio6_base->dir) & ~(1 << 15)), &gpio6_base->dir); + + /* Set U0_SW0 low for UART0 as console*/ + writel((readl(&gpio6_base->set_data) & ~(1 << 10)), + &gpio6_base->set_data); + writel((readl(&gpio6_base->dir) & ~(1 << 10)), &gpio6_base->dir); + + /* Set U0_SW1 low for UART0 as console*/ + writel((readl(&gpio6_base->set_data) & ~(1 << 12)), + &gpio6_base->set_data); + writel((readl(&gpio6_base->dir) & ~(1 << 12)), &gpio6_base->dir); + #ifndef CONFIG_USE_IRQ irq_init(); #endif - #ifdef CONFIG_NAND_DAVINCI /* * NAND CS setup - cycle counts based on da850evm NAND timings in the |