Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (145 commits)
  beagleboard: enable HUB power on all variants of the BeagleBoard
  dm3730: enable dpll5
  ehci-hcd: Allow cleanups to happen gracefully on a timeout.
  OMAP3: Add DSS driver for OMAP3
  led: Remove state-saving of led for toggle functionality and add toggle option to led command
  led: Fixed setting of STATUS_LED_BIT1 when led_name is 'all'
  led: correct off/on locations in structure
  led: added cmd_led to Makefile
  BeagleBoard: fix LED 0/1 in driver
  Corrected LED name match finding avoiding extraneous Usage printouts
  BeagleBoard: config: updated default configuration
  BeagleBoard: config: Enabled multibus support for I2C in configuration
  BeagleBoard: config: add optargs/buddy/camera
  BeagleBoard: config: increase command-line functionality
  BeagleBoard: config: make mtest run
  BeagleBoard: config: enable DSS
  BeagleBoard: config: enable asix driver and dhcp
  BeagleBoard: config: enable networking
  BeagleBoard: config: decrease bootdelay to 2 seconds
  BeagleBoard: config: use uImage.beagle for tftp
  BeagleBoard: config: hardcode MAC for onboard SMSC
  BeagleBoard: config: load kernel from MMC ext, not FAT
  BeagleBoard: Configure DVI/S-video
  BeagleBoard: Added userbutton command
  BeagleBoard: turn off clocks in ehci_stop
  USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
  beagleboard: add support for xM revision C
  beagle: pass expansionboard name in bootargs
  OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
  OMAP3 Beagle Pin Mux initialization glitch fix
  da850: modifications for Logic PD Rev.3 AM18xx EVM
  da850: fix the channel number for EMAC teardown init
  da850: add support for Spectrum Digital AM18xx EVM
  da850: add support to wake up DSP during board init
  da850: modify the U-Boot prompt string
  da850: add NOR boot mode support
  da8xx: add support for multiple PLL controllers
  da850: indicate cache usage disable in config file
  dm365: modify boot prompt from dm365 to dm36x
  dm365: disable cache usage due to coherency issues
  dm6446: disable cache usage due to coherency issues
  OMAP3: Remove legacy mmc driver
  devkit8000: Use generic MMC driver
  TI OMAP3 SDP3430: Use generic MMC driver
  AM3517 CraneBoard: Use generic MMC driver
  OMAP3: pandora: Use generic MMC driver
  OMAP3: Zoom2: Use generic MMC driver
  OMAP3: Zoom1: Use generic MMC driver
  OMAP3: DIG297: Use generic MMC driver
  OMAP3: CM-T35: Use generic MMC driver
  am3517evm: Use generic MMC driver
  omap3evm: Use generic MMC driver
  omap3:clock: check cpu_family before enabling clks for IVA & CAM
  omap3:clock: configure GFX clock to 200MHz for AM/DM37x
  OMAP3/4: Increase console I/O buffer size
  PXA: vpac270: Remove re-defined CONFIG_SYS_TEXT_BASE
  PXA: Fix CSB226, fix monitor length
  PXA: Fix Lubbock, remove redundant parenthesis
  armv7: cache: remove flush on un-aligned invalidate
  armv7: stronger barrier for cache-maintenance operations
  omap: enable caches at system start-up
  arm: do not force d-cache enable on all boards
  ORIGEN: Add MMC SPL support
  ARMV7: Add support for Samsung ORIGEN board
  i2c:gpio:s5p: Enable I2C GPIO on the GONI target
  i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c)
  Tegra2: Use clock and pinmux functions to simplify code
  Tegra2: Add additional pin multiplexing features
  Tegra2: Add more clock support
  Tegra2: Add microsecond timer function
  ARM: remove broken "at91rm9200dk" board
  ARM: remove broken "m501sk" board
  ARM: remove broken "kb9202" board
  ARM: remove broken "csb637" board
  ARM: remove broken "cmc_pu2" board
  ARM: remove broken "at91cap9adk" board
  ARM: remove broken "voiceblue" board
  ARM: remove broken "smdk2400" board
  ARM: remove broken "sbc2410x" board
  ARM: remove broken "netstar" board
  ARM: remove broken "mx1fs2" board
  ARM: remove broken "lpd7a40x" boards
  ARM: remove broken "edb93xx" boards
  ARM: remove broken "B2" board
  ARM: remove broken "armadillo" board
  ARM: remove broken "assabet" board
  ARM: versatile: drop warnings
  IMX: scb9328: drop warnings
  MX31: imx31_litekit: make use of GPIO framework
  MX31: mx31ads: make use of GPIO framework
  MX5: mx51evk: make use of GPIO framework
  MX35: mx35pdk: make use of GPIO framework
  MX5: mx53loco: make use of GPIO framework
  MX5: mx53evk: make use of GPIO framework
  MX5: vision2: make use of GPIO framework
  MX5: mx53smd: make use of GPIO framework
  MX5: mx53ard: make use of GPIO framework
  MX25: zmx25: make use of GPIO framework
  MX5: efikamx: make use of GPIO framework
  MX31: QONG: make use of GPIO framework
  MX35: make use of GPIO framework for MX35 processor
  MX5: make use of GPIO framework for MX5 processor
  MX31: make use of GPIO framework for MX31 processor
  MX25: make use of GPIO framework for MX25 processor
  IMX: uniform GPIO interface using GPIO framework
  MX: MX35 / MX5: uniform clock command with powerpc
  MX35: MX35PDK: support additional RAM on CSD1
  mx53: ddr3: Update DD3 initialization
  ARM: MX51: PLL errata workaround
  ARM: versatilepb : drop warnings due to double definitions
  omap4: increase SRAM budget to fix build error
  omap4: fix build warning due to signed unsigned comparison
  mkimage: Fix 'Unknown OMAP image type - 5'
  omap: fix gpio related build breaks
  gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal)
  SMDKV310: MMC SPL: Remove unwanted dummy functions
  SMDKV310: Fix undefined reference error
  SMDKV310: Fix build error for smdkv310 board
  gpio:samsung s5p_ suffix add for GPIO functions
  mmc: S5P: Support DMA restarts at buffer boundaries
  SMDKV310: Fix host compilation of mkv310_image
  arm: fix bd pointer dereference prior initialization
  arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
  mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
  MX31: removed warnings due to clock.h
  integrator: convert to new build system
  integratorcp: make the board compile
  integratorap: remove hardcoded 32MB memory cmdline
  ...

2 files changed, 22 insertions, 24 deletions

diff --git a/board/davedenx/qong/fpga.c b/board/davedenx/qong/fpga.c
index 789acf0..6536a0b 100644
--- a/board/davedenx/qong/fpga.c
+++ b/board/davedenx/qong/fpga.c
@@ -25,7 +25,7 @@
 #include <common.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
 #include <fpga.h>
 #include <lattice.h>
 #include "qong_fpga.h"
@@ -41,22 +41,22 @@ static void qong_jtag_init(void)
 
 static void qong_fpga_jtag_set_tdi(int value)
 {
-	mxc_gpio_set(QONG_FPGA_TDI_PIN, value);
+	gpio_set_value(QONG_FPGA_TDI_PIN, value);
 }
 
 static void qong_fpga_jtag_set_tms(int value)
 {
-	mxc_gpio_set(QONG_FPGA_TMS_PIN, value);
+	gpio_set_value(QONG_FPGA_TMS_PIN, value);
 }
 
 static void qong_fpga_jtag_set_tck(int value)
 {
-	mxc_gpio_set(QONG_FPGA_TCK_PIN, value);
+	gpio_set_value(QONG_FPGA_TCK_PIN, value);
 }
 
 static int qong_fpga_jtag_get_tdo(void)
 {
-	return mxc_gpio_get(QONG_FPGA_TDO_PIN);
+	return gpio_get_value(QONG_FPGA_TDO_PIN);
 }
 
 lattice_board_specific_func qong_fpga_fns = {
diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index ec22627..99432ed 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -28,7 +28,7 @@
 #include <asm/io.h>
 #include <nand.h>
 #include <fsl_pmic.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
 #include "qong_fpga.h"
 #include <watchdog.h>
 
@@ -51,9 +51,9 @@ int dram_init (void)
 
 static void qong_fpga_reset(void)
 {
-	mxc_gpio_set(QONG_FPGA_RST_PIN, 0);
+	gpio_set_value(QONG_FPGA_RST_PIN, 0);
 	udelay(30);
-	mxc_gpio_set(QONG_FPGA_RST_PIN, 1);
+	gpio_set_value(QONG_FPGA_RST_PIN, 1);
 
 	udelay(300);
 }
@@ -76,21 +76,20 @@ int board_early_init_f (void)
 
 	/* FPGA reset  Pin */
 	/* rstn = 0 */
-	mxc_gpio_set(QONG_FPGA_RST_PIN, 0);
-	mxc_gpio_direction(QONG_FPGA_RST_PIN, MXC_GPIO_DIRECTION_OUT);
+	gpio_direction_output(QONG_FPGA_RST_PIN, 0);
 
 	/* set interrupt pin as input */
-	mxc_gpio_direction(QONG_FPGA_IRQ_PIN, MXC_GPIO_DIRECTION_IN);
+	gpio_direction_input(QONG_FPGA_IRQ_PIN);
 
 	/* FPGA JTAG Interface */
 	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SFS6, MUX_CTL_GPIO));
 	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SCK6, MUX_CTL_GPIO));
 	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CAPTURE, MUX_CTL_GPIO));
 	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_COMPARE, MUX_CTL_GPIO));
-	mxc_gpio_direction(QONG_FPGA_TCK_PIN, MXC_GPIO_DIRECTION_OUT);
-	mxc_gpio_direction(QONG_FPGA_TMS_PIN, MXC_GPIO_DIRECTION_OUT);
-	mxc_gpio_direction(QONG_FPGA_TDI_PIN, MXC_GPIO_DIRECTION_OUT);
-	mxc_gpio_direction(QONG_FPGA_TDO_PIN, MXC_GPIO_DIRECTION_IN);
+	gpio_direction_output(QONG_FPGA_TCK_PIN, 0);
+	gpio_direction_output(QONG_FPGA_TMS_PIN, 0);
+	gpio_direction_output(QONG_FPGA_TDI_PIN, 0);
+	gpio_direction_input(QONG_FPGA_TDO_PIN);
 #endif
 
 	/* setup pins for UART1 */
@@ -263,27 +262,26 @@ static void board_nand_setup(void)
 	qong_fpga_reset();
 
 	/* Enable NAND flash */
-	mxc_gpio_set(15, 1);
-	mxc_gpio_set(14, 1);
-	mxc_gpio_direction(15, MXC_GPIO_DIRECTION_OUT);
-	mxc_gpio_direction(16, MXC_GPIO_DIRECTION_IN);
-	mxc_gpio_direction(14, MXC_GPIO_DIRECTION_IN);
-	mxc_gpio_set(15, 0);
+	gpio_set_value(15, 1);
+	gpio_set_value(14, 1);
+	gpio_direction_output(15, 0);
+	gpio_direction_input(16);
+	gpio_direction_input(14);
 
 }
 
 int qong_nand_rdy(void *chip)
 {
 	udelay(1);
-	return mxc_gpio_get(16);
+	return gpio_get_value(16);
 }
 
 void qong_nand_select_chip(struct mtd_info *mtd, int chip)
 {
 	if (chip >= 0)
-		mxc_gpio_set(15, 0);
+		gpio_set_value(15, 0);
 	else
-		mxc_gpio_set(15, 1);
+		gpio_set_value(15, 1);
 
 }