Merge git://git.denx.de/u-boot into x1

Conflicts:

	drivers/usb/usb_ohci.c

4 files changed, 15 insertions, 15 deletions

diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
index c715ad4..a6aa655 100644
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -38,8 +38,8 @@ int gunzip(void *, int, unsigned char *, unsigned long *);
 
 int board_early_init_f (void)
 {
-	out32(GPIO0_OR, CFG_NAND0_CE);                 /* set initial outputs     */
-	out32(GPIO0_OR, CFG_NAND1_CE);                 /* set initial outputs     */
+	out32(GPIO0_OR, CONFIG_SYS_NAND0_CE);                 /* set initial outputs     */
+	out32(GPIO0_OR, CONFIG_SYS_NAND1_CE);                 /* set initial outputs     */
 
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -85,10 +85,10 @@ int misc_init_r (void)
 {
 	/* adjust flash start and size as well as the offset */
 	gd->bd->bi_flashstart = 0 - flash_info[0].size;
-	gd->bd->bi_flashoffset= flash_info[0].size - CFG_MONITOR_LEN;
+	gd->bd->bi_flashoffset= flash_info[0].size - CONFIG_SYS_MONITOR_LEN;
 #if 0
 	volatile unsigned short *fpga_mode =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+		(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
 	volatile unsigned char *duart0_mcr =
 		(unsigned char *)((ulong)DUART0_BA + 4);
 	volatile unsigned char *duart1_mcr =
@@ -103,8 +103,8 @@ int misc_init_r (void)
 	int i;
 	unsigned long cntrl0Reg;
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -168,7 +168,7 @@ int misc_init_r (void)
 	/*
 	 * Enable power on PS/2 interface
 	 */
-	*fpga_mode |= CFG_FPGA_CTRL_PS2_RESET;
+	*fpga_mode |= CONFIG_SYS_FPGA_CTRL_PS2_RESET;
 
 	/*
 	 * Enable interrupts in exar duart mcr[3]
diff --git a/board/dave/PPChameleonEVB/flash.c b/board/dave/PPChameleonEVB/flash.c
index 692d275..e5a0d3d 100644
--- a/board/dave/PPChameleonEVB/flash.c
+++ b/board/dave/PPChameleonEVB/flash.c
@@ -42,7 +42,7 @@ static void flash_get_offsets (ulong base, flash_info_t * info);
 unsigned long flash_init (void)
 {
 #ifdef __DEBUG_START_FROM_SRAM__
-	return CFG_DUMMY_FLASH_SIZE;
+	return CONFIG_SYS_DUMMY_FLASH_SIZE;
 #else
 	unsigned long size;
 	int i;
@@ -54,7 +54,7 @@ unsigned long flash_init (void)
 	debug("[%s, %d] flash_info = 0x%08X ...\n", __FUNCTION__, __LINE__, flash_info);
 
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
@@ -102,7 +102,7 @@ unsigned long flash_init (void)
 
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
+			    -CONFIG_SYS_MONITOR_LEN,
 			    0xffffffff,
 			    &flash_info[0]);
 
diff --git a/board/dave/PPChameleonEVB/nand.c b/board/dave/PPChameleonEVB/nand.c
index 3ccbf65..14b61a4 100644
--- a/board/dave/PPChameleonEVB/nand.c
+++ b/board/dave/PPChameleonEVB/nand.c
@@ -67,11 +67,11 @@ static int ppchameleonevb_device_ready(struct mtd_info *mtdinfo)
 
 	/* use the base addr to find out which chip are we dealing with */
 	switch((ulong) this->IO_ADDR_W) {
-	case CFG_NAND0_BASE:
-		rb_gpio_pin = CFG_NAND0_RDY;
+	case CONFIG_SYS_NAND0_BASE:
+		rb_gpio_pin = CONFIG_SYS_NAND0_RDY;
 		break;
-	case CFG_NAND1_BASE:
-		rb_gpio_pin = CFG_NAND1_RDY;
+	case CONFIG_SYS_NAND1_BASE:
+		rb_gpio_pin = CONFIG_SYS_NAND1_RDY;
 		break;
 	default: /* this should never happen */
 		return 0;
diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds
index e42c76f..ed02cef 100644
--- a/board/dave/PPChameleonEVB/u-boot.lds
+++ b/board/dave/PPChameleonEVB/u-boot.lds
@@ -143,7 +143,7 @@ SECTIONS
    *(COMMON)
   }
 
-  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+  ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
   . = 0xFFFF8000;
   .ppcenv :
   {