ARM: remove broken "B2" board

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andrea Scian <andrea.scian@dave-tech.it>

1 files changed, 0 insertions, 139 deletions

diff --git a/board/dave/B2/B2.c b/board/dave/B2/B2.c
deleted file mode 100644
index 096ebbd..0000000
--- a/board/dave/B2/B2.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * (C) Copyright 2004
- * DAVE Srl
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info@wawnet.biz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialization
- */
-
-int board_init (void)
-{
-	u32 temp;
-
-	/* Configuration Port Control Register*/
-	/* Port A */
-	PCONA = 0x3ff;
-
-	/* Port B */
-	PCONB = 0xff;
-	PDATB = 0xFFFF;
-
-	/* Port C */
-	/*
-	PCONC = 0xff55ff15;
-	PDATC = 0x0;
-	PUPC = 0xffff;
-	*/
-
-	/* Port D */
-	/*
-	PCOND = 0xaaaa;
-	PUPD = 0xff;
-	*/
-
-	/* Port E */
-	PCONE = 0x0001aaa9;
-	PDATE = 0x0;
-	PUPE = 0xff;
-
-	/* Port F */
-	PCONF = 0x124955;
-	PDATF  = 0xff; /* B2-eth_reset tied high level */
-	/*
-	PUPF = 0x1e3;
-	*/
-
-	/* Port G */
-	PUPG = 0x1;
-	PCONG = 0x3; /*PG0= EINT0= ETH_INT prepared for linux kernel*/
-
-	INTMSK = 0x03fffeff;
-	INTCON = 0x05;
-
-    /*
-	Configure chip ethernet interrupt as High level
-	Port G EINT 0-7 EINT0 -> CHIP ETHERNET
-    */
-	temp = EXTINT;
-	temp &= ~0x7;
-    temp |= 0x1; /*LEVEL_HIGH*/
-	EXTINT = temp;
-
-    /*
-	Reset SMSC LAN91C96 chip
-    */
-    temp= PCONF;
-    temp |= 0x00000040;
-    PCONF = temp;
-
-	/* Reset high */
-    temp = PDATF;
-    temp |= (1 << 3);
-    PDATF = temp;
-
-    /* Short delay */
-    for (temp=0;temp<10;temp++)
-    {
-		/* NOP */
-    }
-
-    /* Reset low */
-    temp = PDATF;
-    temp &= ~(1 << 3);
-    PDATF = temp;
-
-	/* arch number MACH_TYPE_MBA44B0 */
-	gd->bd->bi_arch_number = MACH_TYPE_S3C44B0;
-
-	/* location of boot parameters */
-	gd->bd->bi_boot_params = 0x0c000100;
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_LAN91C96
-	rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
-	return rc;
-}
-#endif