summaryrefslogtreecommitdiff
path: root/board/cpc45/cpc45.c
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-12-31 09:32:47 +0000
committerwdenk <wdenk>2004-12-31 09:32:47 +0000
commite2ffd59b4d93c9149de1caaa087371b0cfc512c9 (patch)
tree86cfb6e30bec1686253b0542d76f57c5d62d183a /board/cpc45/cpc45.c
parent400ab719c6025c176c50bcdff342384222d7424b (diff)
downloadu-boot-imx-e2ffd59b4d93c9149de1caaa087371b0cfc512c9.zip
u-boot-imx-e2ffd59b4d93c9149de1caaa087371b0cfc512c9.tar.gz
u-boot-imx-e2ffd59b4d93c9149de1caaa087371b0cfc512c9.tar.bz2
* Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for additional ethernet addresses. * Cleanup drivers/i82365.c - avoid duplication of code * Fix bogus "cannot span across banks" flash error message * Add support for CompactFlash for the CPC45 Board.
Diffstat (limited to 'board/cpc45/cpc45.c')
-rw-r--r--board/cpc45/cpc45.c40
1 files changed, 40 insertions, 0 deletions
diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c
index 92ccd42..51b0085 100644
--- a/board/cpc45/cpc45.c
+++ b/board/cpc45/cpc45.c
@@ -24,11 +24,13 @@
#include <common.h>
#include <mpc824x.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <pci.h>
#include <i2c.h>
int sysControlDisplay(int digit, uchar ascii_code);
extern void Plx9030Init(void);
+extern void SPD67290Init(void);
/* We have to clear the initial data area here. Couldn't have done it
* earlier because DRAM had not been initialized.
@@ -180,6 +182,10 @@ static struct pci_config_table pci_cpc45_config_table[] = {
pci_cfgfunc_config_device, { PCI_PLX9030_IOADDR,
PCI_PLX9030_MEMADDR,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0E, PCI_ANY_ID,
+ pci_cfgfunc_config_device, { PCMCIA_IO_BASE,
+ PCMCIA_IO_BASE,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO }},
#endif /*CONFIG_PCI_PNP*/
{ }
};
@@ -233,3 +239,37 @@ int sysControlDisplay (int digit, /* number of digit 0..7 */
return (0);
}
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+
+#ifdef CFG_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
+#endif
+
+int pcmcia_init(void)
+{
+ u_int rc;
+
+ debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+ rc = i82365_init();
+
+ return rc;
+}
+
+#endif /* CFG_CMD_PCMCIA */
+
+# ifdef CONFIG_IDE_LED
+void ide_led (uchar led, uchar status)
+{
+ u_char val;
+ /* We have one PCMCIA slot and use LED H4 for the IDE Interface */
+ val = readb(BCSR_BASE + 0x04);
+ if (status) { /* led on */
+ val |= B_CTRL_LED0;
+ } else {
+ val &= ~B_CTRL_LED0;
+ }
+ writeb(val, BCSR_BASE + 0x04);
+}
+# endif