summaryrefslogtreecommitdiff
path: root/board/congatec/cgtqmx6eval/README
diff options
context:
space:
mode:
authorSARTRE Leo <lsartre@adeneo-embedded.com>2013-06-03 23:30:36 +0000
committerStefano Babic <sbabic@denx.de>2013-06-04 12:08:46 +0200
commit9b75bad0b926b018c73348249771d45b039fa920 (patch)
tree1b37b30d1092a0ecb79c50973733185971e4276e /board/congatec/cgtqmx6eval/README
parenta7efb026361bff4f352db8778d82b9a3a30dc27f (diff)
downloadu-boot-imx-9b75bad0b926b018c73348249771d45b039fa920.zip
u-boot-imx-9b75bad0b926b018c73348249771d45b039fa920.tar.gz
u-boot-imx-9b75bad0b926b018c73348249771d45b039fa920.tar.bz2
Add support for Congatec Conga-QEVAl board
Add minimal support (only boot from mmc device) for the Congatec Conga-QEVAl Evaluation Carrier Board with conga-Qmx6q (i.MX6 Quad processor) module. Signed-off-by: Leo Sartre <lsartre@adeneo-embedded.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Diffstat (limited to 'board/congatec/cgtqmx6eval/README')
-rw-r--r--board/congatec/cgtqmx6eval/README29
1 files changed, 29 insertions, 0 deletions
diff --git a/board/congatec/cgtqmx6eval/README b/board/congatec/cgtqmx6eval/README
new file mode 100644
index 0000000..bbf0f75
--- /dev/null
+++ b/board/congatec/cgtqmx6eval/README
@@ -0,0 +1,29 @@
+U-Boot for the Congatec Conga-QEVAl Evaluation Carrier board with
+qmx6 quad module.
+
+This file contains information for the port of U-Boot to the Congatec
+Conga-QEVAl Evaluation Carrier board with qmx6 quad module.
+
+1. Boot source, boot from SD card
+---------------------------------
+
+This version of u-boot works only on the SD card. By default, the
+Congatec board can boot only from the SPI-NOR.
+But, with the u-boot version provided with the board you can write boot
+registers to force the board to reboot and boot from the SD slot. If
+"bmode" command is not available from your pre-installed u-boot, these
+instruction will produce the same effect:
+
+conga-QMX6 U-Boot > mw.l 0x20d8040 0x3850
+conga-QMX6 U-Boot > mw.l 0x020d8044 0x10000000
+conga-QMX6 U-Boot > reset
+resetting ...
+
+The the board will reboot and, if you have written your SD correctly
+the board will use u-boot that live into the SD
+
+To copy the resulting u-boot.imx to the SD card:
+
+ dd if=u-boot.imx of=/dev/xxx bs=512 seek=2
+
+Note: Replace xxx with the device representing the SD card in your system.