CM1.QP1: Support for the Schindler CM1.QP1 board.

Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>

7 files changed, 1101 insertions, 0 deletions

diff --git a/board/cm1_qp1/Makefile b/board/cm1_qp1/Makefile
new file mode 100644
index 0000000..e739326
--- /dev/null
+++ b/board/cm1_qp1/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2003-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o cmd_cm1_qp1.o fwupdate.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/cm1_qp1/cm1_qp1.c b/board/cm1_qp1/cm1_qp1.c
new file mode 100644
index 0000000..b49298f
--- /dev/null
+++ b/board/cm1_qp1/cm1_qp1.c
@@ -0,0 +1,222 @@
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * (C) Copyright 2004-2005
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#ifdef CONFIG_OF_FLAT_TREE
+#include <ft_build.h>
+#endif /* CONFIG_OF_FLAT_TREE */
+
+#include "fwupdate.h"
+
+#ifndef CFG_RAMBOOT
+/*
+ * Helper function to initialize SDRAM controller.
+ */
+static void sdram_start(int hi_addr)
+{
+	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+	/* unlock mode register */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 |
+						hi_addr_bit;
+
+	/* precharge all banks */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 |
+						hi_addr_bit;
+
+	/* auto refresh */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
+						hi_addr_bit;
+
+	/* auto refresh, second time */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
+						hi_addr_bit;
+
+	/* set mode register */
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+
+	/* normal operation */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+}
+#endif /* CFG_RAMBOOT */
+
+/*
+ * Initalize SDRAM - configure SDRAM controller, detect memory size.
+ */
+long int initdram(int board_type)
+{
+	ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+	ulong test1, test2;
+
+	/* configure SDRAM start/end for detection */
+	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
+
+	/* setup config registers */
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+
+	sdram_start(0);
+	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	sdram_start(1);
+	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize = test1;
+	} else
+		dramsize = test2;
+
+	/* memory smaller than 1MB is impossible */
+	if (dramsize < (1 << 20))
+		dramsize = 0;
+
+	/* set SDRAM CS0 size according to the amount of RAM found */
+	if (dramsize > 0) {
+		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
+			__builtin_ffs(dramsize >> 20) - 1;
+	} else
+		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+#else /* CFG_RAMBOOT */
+	/* retrieve size of memory connected to SDRAM CS0 */
+	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+	if (dramsize >= 0x13)
+		dramsize = (1 << (dramsize - 0x13)) << 20;
+	else
+		dramsize = 0;
+#endif /* CFG_RAMBOOT */
+
+	/*
+	 * On MPC5200B we need to set the special configuration delay in the
+	 * DDR controller.  Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of
+	 * the MPC5200B User's Manual.
+	 */
+	*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+	__asm__ volatile ("sync");
+
+	return dramsize;
+}
+
+
+int checkboard(void)
+{
+	puts("Board: CM1.QP1\n");
+	return 0;
+}
+
+
+int board_early_init_r(void)
+{
+	/*
+	 * Now, when we are in RAM, enable flash write access for detection
+	 * process. Note that CS_BOOT cannot be cleared when executing in
+	 * flash.
+	 */
+	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+	return 0;
+}
+
+
+#ifdef CONFIG_POST
+int post_hotkeys_pressed(void)
+{
+	return 0;
+}
+#endif /* CONFIG_POST */
+
+
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+void post_word_store(ulong a)
+{
+	vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
+	*save_addr = a;
+}
+
+
+ulong post_word_load(void)
+{
+	vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
+	return *save_addr;
+}
+#endif /* CONFIG_POST || CONFIG_LOGBUFFER */
+
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+	uchar buf[6];
+	char str[18];
+
+	/* Read ethaddr from EEPROM */
+	if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) {
+		sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X",
+			buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+		/* Check if MAC addr is owned by Schindler */
+		if (strstr(str, "00:06:C3") != str) {
+			printf(LOG_PREFIX "Warning - Illegal MAC address (%s)"
+				" in EEPROM.\n", str);
+			printf(LOG_PREFIX "Using MAC from environment\n");
+		} else {
+			printf(LOG_PREFIX "Using MAC (%s) from I2C EEPROM\n",
+				str);
+			setenv("ethaddr", str);
+		}
+	} else {
+		printf(LOG_PREFIX "Warning - Unable to read MAC from I2C"
+			" device at address %02X:%04X\n", CFG_I2C_EEPROM,
+			CONFIG_MAC_OFFSET);
+		printf(LOG_PREFIX "Using MAC from environment\n");
+	}
+	return 0;
+#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */
+}
+#endif /* CONFIG_MISC_INIT_R */
+
+
+#ifdef CONFIG_LAST_STAGE_INIT
+int last_stage_init(void)
+{
+#ifdef CONFIG_USB_STORAGE
+	cm1_fwupdate();
+#endif /* CONFIG_USB_STORAGE */
+	return 0;
+}
+#endif /* CONFIG_LAST_STAGE_INIT */
+
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+}
+#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/cm1_qp1/cmd_cm1_qp1.c b/board/cm1_qp1/cmd_cm1_qp1.c
new file mode 100644
index 0000000..4a01d2a
--- /dev/null
+++ b/board/cm1_qp1/cmd_cm1_qp1.c
@@ -0,0 +1,446 @@
+/*
+ *  (C) Copyright 2007 Markus Kappeler <markus.kappeler@objectxp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <usb.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+
+int do_i2c(char *argv[])
+{
+	unsigned char temp, temp1;
+
+	printf("Starting I2C Test\n"
+		"Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n"
+		"Please press any key to start\n\n");
+	getc();
+
+	temp = 0xf0; /* set io 0-4 as output */
+	i2c_write(CFG_I2C_IO, 3, 1, (uchar *)&temp, 1);
+
+	printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n"
+		"Press any key to stop\n\n");
+
+	while (!tstc()) {
+		i2c_read(CFG_I2C_IO, 0, 1, (uchar *)&temp, 1);
+		temp1 = (temp >> 4) & 0x03;
+		temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */
+		temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */
+		temp = temp1;
+		i2c_write(CFG_I2C_IO, 1, 1, (uchar *)&temp, 1);
+	}
+	getc();
+
+	return 0;
+}
+
+int do_usbtest(char *argv[])
+{
+	int i;
+	static int usb_stor_curr_dev = -1; /* current device */
+
+	printf("Starting USB Test\n"
+		"Please insert USB Memmory Stick\n\n"
+		"Please press any key to start\n\n");
+	getc();
+
+	usb_stop();
+	printf("(Re)start USB...\n");
+	i = usb_init();
+#ifdef CONFIG_USB_STORAGE
+		/* try to recognize storage devices immediately */
+		if (i >= 0)
+			usb_stor_curr_dev = usb_stor_scan(1);
+#endif /* CONFIG_USB_STORAGE */
+	if (usb_stor_curr_dev >= 0)
+		printf("Found USB Storage Dev continue with Test...\n");
+	else {
+		printf("No USB Storage Device detected.. Stop Test\n");
+		return 1;
+	}
+
+	usb_stor_info();
+
+	printf("stopping USB..\n");
+	usb_stop();
+
+	return 0;
+}
+
+int do_led(char *argv[])
+{
+	int i = 0;
+	struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
+
+	printf("Starting LED Test\n"
+		"Please set Switch S500 all off\n\n"
+		"Please press any key to start\n\n");
+	getc();
+
+	/* configure timer 2-3 for simple GPIO output High */
+	gpt->gpt2.emsr |= 0x00000034;
+	gpt->gpt3.emsr |= 0x00000034;
+
+	(*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x80000000;
+	(*(vu_long *)MPC5XXX_WU_GPIO_DIR) |= 0x80000000;
+	printf("Please press any key to stop\n\n");
+	while (!tstc()) {
+		if (i == 1) {
+			(*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000;
+			gpt->gpt2.emsr &= ~0x00000010;
+			gpt->gpt3.emsr &= ~0x00000010;
+		} else if (i == 2) {
+			(*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000;
+			gpt->gpt2.emsr &= ~0x00000010;
+			gpt->gpt3.emsr |= 0x00000010;
+		} else if (i >= 3) {
+			(*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000;
+			gpt->gpt3.emsr &= ~0x00000010;
+			gpt->gpt2.emsr |= 0x00000010;
+			i = 0;
+		}
+		i++;
+		udelay(200000);
+	}
+	getc();
+
+	(*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000;
+	gpt->gpt2.emsr |= 0x00000010;
+	gpt->gpt3.emsr |= 0x00000010;
+
+	return 0;
+}
+
+int do_rs232(char *argv[])
+{
+	int error_status = 0;
+	struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+	struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1;
+
+	/* Configure PSC 2-3-6 as GPIO */
+	gpio->port_config &= 0xFF0FF80F;
+
+	switch (simple_strtoul(argv[2], NULL, 10)) {
+	case 1:
+		/* check RTS <-> CTS loop */
+		/* set rts to 0 */
+		printf("Uart 1 test: RX TX tested by using U-Boot\n"
+			"Please connect RTS with CTS on Uart1 plug\n\n"
+			"Press any key to start\n\n");
+		getc();
+
+		psc1->op1 |= 0x01;
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		/* check status at cts */
+		if ((psc1->ip & 0x01) != 0) {
+			error_status = 3;
+			printf("%s: failure at rs232_1, cts status is %d "
+				"(should be 0)\n",
+				__FUNCTION__, (psc1->ip & 0x01));
+		}
+
+		/* set rts to 1 */
+		psc1->op0 |= 0x01;
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		/* check status at cts */
+		if ((psc1->ip & 0x01) != 1) {
+			error_status = 3;
+			printf("%s: failure at rs232_1, cts status is %d "
+				"(should be 1)\n",
+				__FUNCTION__, (psc1->ip & 0x01));
+		}
+		break;
+	case 2:
+		/* set PSC2_0, PSC2_2 as output and PSC2_1, PSC2_3 as input */
+		printf("Uart 2 test: Please use RS232 Loopback plug on UART2\n"
+			"\nPress any key to start\n\n");
+		getc();
+
+		gpio->simple_gpioe &= ~(0x000000F0);
+		gpio->simple_gpioe |= 0x000000F0;
+		gpio->simple_ddr &= ~(0x000000F0);
+		gpio->simple_ddr |= 0x00000050;
+
+		/* check TXD <-> RXD loop */
+		/* set TXD to 1 */
+		gpio->simple_dvo |= (1 << 4);
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		if ((gpio->simple_ival & 0x00000020) != 0x00000020) {
+			error_status = 2;
+			printf("%s: failure at rs232_2, rxd status is %d "
+				"(should be 1)\n", __FUNCTION__,
+				(gpio->simple_ival & 0x00000020) >> 5);
+		}
+
+		/* set TXD to 0 */
+		gpio->simple_dvo &= ~(1 << 4);
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		if ((gpio->simple_ival & 0x00000020) != 0x00000000) {
+			error_status = 2;
+			printf("%s: failure at rs232_2, rxd status is %d "
+				"(should be 0)\n", __FUNCTION__,
+				(gpio->simple_ival & 0x00000020) >> 5);
+		}
+
+		/* check RTS <-> CTS loop */
+		/* set RTS to 1 */
+		gpio->simple_dvo |= (1 << 6);
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		if ((gpio->simple_ival & 0x00000080) != 0x00000080) {
+			error_status = 3;
+			printf("%s: failure at rs232_2, cts status is %d "
+				"(should be 1)\n", __FUNCTION__,
+				(gpio->simple_ival & 0x00000080) >> 7);
+		}
+
+		/* set RTS to 0 */
+		gpio->simple_dvo &= ~(1 << 6);
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		if ((gpio->simple_ival & 0x00000080) != 0x00000000) {
+			error_status = 3;
+			printf("%s: failure at rs232_2, cts status is %d "
+				"(should be 0)\n", __FUNCTION__,
+				(gpio->simple_ival & 0x00000080) >> 7);
+		}
+		break;
+	case 3:
+		/* set PSC3_0, PSC3_2 as output and PSC3_1, PSC3_3 as input */
+		printf("Uart 3 test: Please use RS232 Loopback plug on UART2\n"
+			"\nPress any key to start\n\n");
+		getc();
+
+		gpio->simple_gpioe &= ~(0x00000F00);
+		gpio->simple_gpioe |= 0x00000F00;
+
+		gpio->simple_ddr &= ~(0x00000F00);
+		gpio->simple_ddr |= 0x00000500;
+
+		/* check TXD <-> RXD loop */
+		/* set TXD to 1 */
+		gpio->simple_dvo |= (1 << 8);
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		if ((gpio->simple_ival & 0x00000200) != 0x00000200) {
+			error_status = 2;
+			printf("%s: failure at rs232_3, rxd status is %d "
+				"(should be 1)\n", __FUNCTION__,
+				(gpio->simple_ival & 0x00000200) >> 9);
+		}
+
+		/* set TXD to 0 */
+		gpio->simple_dvo &= ~(1 << 8);
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		if ((gpio->simple_ival & 0x00000200) != 0x00000000) {
+			error_status = 2;
+			printf("%s: failure at rs232_3, rxd status is %d "
+				"(should be 0)\n", __FUNCTION__,
+				(gpio->simple_ival & 0x00000200) >> 9);
+		}
+
+		/* check RTS <-> CTS loop */
+		/* set RTS to 1 */
+		gpio->simple_dvo |= (1 << 10);
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		if ((gpio->simple_ival & 0x00000800) != 0x00000800) {
+			error_status = 3;
+			printf("%s: failure at rs232_3, cts status is %d "
+				"(should be 1)\n", __FUNCTION__,
+				(gpio->simple_ival & 0x00000800) >> 11);
+		}
+
+		/* set RTS to 0 */
+		gpio->simple_dvo &= ~(1 << 10);
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		if ((gpio->simple_ival & 0x00000800) != 0x00000000) {
+			error_status = 3;
+			printf("%s: failure at rs232_3, cts status is %d "
+				"(should be 0)\n", __FUNCTION__,
+				(gpio->simple_ival & 0x00000800) >> 11);
+		}
+		break;
+	case 4:
+		/* set PSC6_2, PSC6_3 as output and PSC6_0, PSC6_1 as input */
+		printf("Uart 4 test: Please use RS232 Loopback plug on UART2\n"
+			"\nPress any key to start\n\n");
+		getc();
+
+		gpio->simple_gpioe &= ~(0xF0000000);
+		gpio->simple_gpioe |= 0x30000000;
+
+		gpio->simple_ddr &= ~(0xf0000000);
+		gpio->simple_ddr |= 0x30000000;
+
+		(*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x30000000;
+		(*(vu_long *)MPC5XXX_WU_GPIO_DIR) &= ~(0x30000000);
+
+		/* check TXD <-> RXD loop */
+		/* set TXD to 1 */
+		gpio->simple_dvo |= (1 << 28);
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
+				0x10000000) {
+			error_status = 2;
+			printf("%s: failure at rs232_4, rxd status is %d "
+				"(should be 1)\n", __FUNCTION__,
+				((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
+					0x10000000) >> 28);
+		}
+
+		/* set TXD to 0 */
+		gpio->simple_dvo &= ~(1 << 28);
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
+				0x00000000) {
+			error_status = 2;
+			printf("%s: failure at rs232_4, rxd status is %d "
+				"(should be 0)\n", __FUNCTION__,
+				((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
+					0x10000000) >> 28);
+		}
+
+		/* check RTS <-> CTS loop */
+		/* set RTS to 1 */
+		gpio->simple_dvo |= (1 << 29);
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
+				0x20000000) {
+			error_status = 3;
+			printf("%s: failure at rs232_4, cts status is %d "
+				"(should be 1)\n", __FUNCTION__,
+				((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
+					0x20000000) >> 29);
+		}
+
+		/* set RTS to 0 */
+		gpio->simple_dvo &= ~(1 << 29);
+
+		/* wait some time before requesting status */
+		udelay(10);
+
+		if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
+				0x00000000) {
+			error_status = 3;
+			printf("%s: failure at rs232_4, cts status is %d "
+				"(should be 0)\n", __FUNCTION__,
+				((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
+					0x20000000) >> 29);
+		}
+		break;
+	default:
+		printf("%s: invalid rs232 number %s\n", __FUNCTION__, argv[2]);
+		error_status = 1;
+		break;
+	}
+	gpio->port_config |= (CFG_GPS_PORT_CONFIG & 0xFF0FF80F);
+
+	return error_status;
+}
+
+int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int rcode = -1;
+
+	switch (argc) {
+	case 2:
+		if (strncmp(argv[1], "i2c", 3) == 0)
+			rcode = do_i2c(argv);
+		else if (strncmp(argv[1], "led", 3) == 0)
+			rcode = do_led(argv);
+		else if (strncmp(argv[1], "usb", 3) == 0)
+			rcode = do_usbtest(argv);
+		break;
+	case 3:
+		if (strncmp(argv[1], "rs232", 3) == 0)
+			rcode = do_rs232(argv);
+		break;
+	}
+
+	switch (rcode) {
+	case -1:
+		printf("Usage:\n"
+			"fkt { i2c | led | usb }\n"
+			"fkt rs232 number\n");
+		rcode = 1;
+		break;
+	case 0:
+		printf("Test passed\n");
+		break;
+	default:
+		printf("Test failed with code: %d\n", rcode);
+	}
+
+	return rcode;
+}
+
+U_BOOT_CMD(
+	fkt,	4,	1,	cmd_fkt,
+	"fkt     - Function test routines\n",
+	"i2c\n"
+	"     - Test I2C communication\n"
+	"fkt led\n"
+	"     - Test LEDs\n"
+	"fkt rs232 number\n"
+	"     - Test RS232 (loopback plug(s) for RS232 required)\n"
+	"fkt usb\n"
+	"     - Test USB communication\n"
+);
+#endif /* CFG_CMD_BSP */
diff --git a/board/cm1_qp1/config.mk b/board/cm1_qp1/config.mk
new file mode 100644
index 0000000..7f06139
--- /dev/null
+++ b/board/cm1_qp1/config.mk
@@ -0,0 +1,26 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xfc000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/cm1_qp1/fwupdate.c b/board/cm1_qp1/fwupdate.c
new file mode 100644
index 0000000..637375e
--- /dev/null
+++ b/board/cm1_qp1/fwupdate.c
@@ -0,0 +1,187 @@
+/*
+ * (C) Copyright 2007 Schindler Lift Inc.
+ * (C) Copyright 2007 Semihalf
+ *
+ * Author: Michel Marti <mma@objectxp.com>
+ * Adapted for U-Boot 1.2 by Piotr Kruszynski <ppk@semihalf.com>:
+ * - code clean-up
+ * - bugfix for overwriting bootargs by user
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <image.h>
+#include <usb.h>
+#include <fat.h>
+
+#include "fwupdate.h"
+
+extern int do_bootm(cmd_tbl_t *, int, int, char *[]);
+extern long do_fat_read(const char *, void *, unsigned long, int);
+extern int do_fat_fsload(cmd_tbl_t *, int, int, char *[]);
+
+static int load_rescue_image(ulong);
+
+void cm1_fwupdate(void)
+{
+	cmd_tbl_t *bcmd;
+	char *rsargs;
+	char *tmp = NULL;
+	char ka[16];
+	char *argv[3] = { "bootm", ka, NULL };
+
+	/* Check if rescue system is disabled... */
+	if (getenv("norescue")) {
+		printf(LOG_PREFIX "Rescue System disabled.\n");
+		return;
+	}
+
+	/* Check if we have a USB storage device and load image */
+	if (load_rescue_image(LOAD_ADDR))
+		return;
+
+	bcmd = find_cmd("bootm");
+	if (!bcmd)
+		return;
+
+	sprintf(ka, "%lx", LOAD_ADDR);
+
+	/* prepare our bootargs */
+	rsargs = getenv("rs-args");
+	if (!rsargs)
+		rsargs = RS_BOOTARGS;
+	else {
+		tmp = malloc(strlen(rsargs+1));
+		if (!tmp) {
+			printf(LOG_PREFIX "Memory allocation failed\n");
+			return;
+		}
+		strcpy(tmp, rsargs);
+		rsargs = tmp;
+	}
+
+	setenv("bootargs", rsargs);
+
+	if (rsargs == tmp)
+		free(rsargs);
+
+	printf(LOG_PREFIX "Starting update system (bootargs=%s)...\n", rsargs);
+	do_bootm(bcmd, 0, 2, argv);
+}
+
+static int load_rescue_image(ulong addr)
+{
+	disk_partition_t info;
+	int devno;
+	int partno;
+	int i;
+	char fwdir[64];
+	char nxri[128];
+	char *tmp;
+	char dev[7];
+	char addr_str[16];
+	char *argv[6] = { "fatload", "usb", dev, addr_str, nxri, NULL };
+	block_dev_desc_t *stor_dev = NULL;
+	cmd_tbl_t *bcmd;
+
+	/* Get name of firmware directory */
+	tmp = getenv("fw-dir");
+
+	/* Copy it into fwdir */
+	strncpy(fwdir, tmp ? tmp : FW_DIR, sizeof(fwdir));
+	fwdir[sizeof(fwdir) - 1] = 0; /* Terminate string */
+
+	printf(LOG_PREFIX "Checking for firmware image directory '%s' on USB"
+		" storage...\n", fwdir);
+	usb_stop();
+	if (usb_init() != 0)
+		return 1;
+
+	/* Check for storage device */
+	if (usb_stor_scan(1) != 0) {
+		usb_stop();
+		return 1;
+	}
+
+	/* Detect storage device */
+	for (devno = 0; devno < USB_MAX_STOR_DEV; devno++) {
+		stor_dev = usb_stor_get_dev(devno);
+		if (stor_dev->type != DEV_TYPE_UNKNOWN)
+			break;
+	}
+	if (!stor_dev || stor_dev->type == DEV_TYPE_UNKNOWN) {
+		printf(LOG_PREFIX "No valid storage device found...\n");
+		usb_stop();
+		return 1;
+	}
+
+	/* Detect partition */
+	for (partno = -1, i = 0; i < 6; i++) {
+		if (get_partition_info(stor_dev, i, &info) == 0) {
+			if (fat_register_device(stor_dev, i) == 0) {
+				/* Check if rescue image is present */
+				FW_DEBUG("Looking for firmware directory '%s'"
+					" on partition %d\n", fwdir, i);
+				if (do_fat_read(fwdir, NULL, 0, LS_NO) == -1) {
+					FW_DEBUG("No NX rescue image on "
+						"partition %d.\n", i);
+				} else {
+					partno = i;
+					FW_DEBUG("Partition %d contains "
+						"firmware directory\n", partno);
+					break;
+				}
+			}
+		}
+	}
+
+	if (partno == -1) {
+		printf(LOG_PREFIX "Error: No valid (FAT) partition detected\n");
+		usb_stop();
+		return 1;
+	}
+
+	/* Load the rescue image */
+	bcmd = find_cmd("fatload");
+	if (!bcmd) {
+		printf(LOG_PREFIX "Error - 'fatload' command not present.\n");
+		usb_stop();
+		return 1;
+	}
+
+	tmp = getenv("nx-rescue-image");
+	sprintf(nxri, "%s/%s", fwdir, tmp ? tmp : RESCUE_IMAGE);
+	sprintf(dev, "%d:%d", devno, partno);
+	sprintf(addr_str, "%lx", addr);
+
+	FW_DEBUG("fat_fsload device='%s', addr='%s', file: %s\n",
+		dev, addr_str, nxri);
+
+	if (do_fat_fsload(bcmd, 0, 5, argv) != 0) {
+		usb_stop();
+		return 1;
+	}
+
+	/* Stop USB */
+	usb_stop();
+	return 0;
+}
diff --git a/board/cm1_qp1/fwupdate.h b/board/cm1_qp1/fwupdate.h
new file mode 100644
index 0000000..119c2d6
--- /dev/null
+++ b/board/cm1_qp1/fwupdate.h
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2007 Schindler Lift Inc.
+ *
+ * Author: Michel Marti <mma@objectxp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FW_UPDATE_H
+#define __FW_UPDATE_H
+
+/* Default prefix for output messages */
+#define LOG_PREFIX	"CM1:   "
+
+/* Extra debug macro */
+#ifdef CONFIG_FWUPDATE_DEBUG
+#define FW_DEBUG(fmt...) printf(LOG_PREFIX fmt)
+#else
+#define FW_DEBUG(fmt...)
+#endif
+
+/* Name of the directory holding firmware images */
+#define FW_DIR		"nx-fw"
+#define RESCUE_IMAGE	"nxrs.img"
+#define LOAD_ADDR	0x400000
+#define RS_BOOTARGS	"ramdisk=8192K"
+
+/* Main function for fwupdate */
+void cm1_fwupdate(void);
+
+#endif /* __FW_UPDATE_H */
diff --git a/board/cm1_qp1/u-boot.lds b/board/cm1_qp1/u-boot.lds
new file mode 100644
index 0000000..8fa9c0f
--- /dev/null
+++ b/board/cm1_qp1/u-boot.lds
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc5xxx/start.o	(.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}