Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

3 files changed, 45 insertions, 45 deletions

diff --git a/board/cerf250/flash.c b/board/cerf250/flash.c
index ba82892..a4b201e 100644
--- a/board/cerf250/flash.c
+++ b/board/cerf250/flash.c
@@ -28,7 +28,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
 	int i;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -85,13 +85,13 @@ unsigned long flash_init (void)
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + monitor_flash_len - 1,
+			CONFIG_SYS_FLASH_BASE,
+			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0] );
 
 	flash_protect ( FLAG_PROTECT_SET,
-			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+			CONFIG_ENV_ADDR,
+			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
 
 	return size;
 }
@@ -203,10 +203,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		break;
 	}
 
-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}
 
 	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
@@ -276,7 +276,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			*addr = (FPW) 0x00D000D0;	/* erase confirm */
 
 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
@@ -410,7 +410,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 
 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
diff --git a/board/cerf250/lowlevel_init.S b/board/cerf250/lowlevel_init.S
index ad3c59f..5bfe53c 100644
--- a/board/cerf250/lowlevel_init.S
+++ b/board/cerf250/lowlevel_init.S
@@ -29,7 +29,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
    .macro CPWAIT reg
@@ -49,67 +49,67 @@ lowlevel_init:
 	/* Set up GPIO pins first ----------------------------------------- */
 
 	ldr	r0, =GPSR0
-	ldr	r1, =CFG_GPSR0_VAL
+	ldr	r1, =CONFIG_SYS_GPSR0_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPSR1
-	ldr	r1, =CFG_GPSR1_VAL
+	ldr	r1, =CONFIG_SYS_GPSR1_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPSR2
-	ldr	r1, =CFG_GPSR2_VAL
+	ldr	r1, =CONFIG_SYS_GPSR2_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPCR0
-	ldr	r1, =CFG_GPCR0_VAL
+	ldr	r1, =CONFIG_SYS_GPCR0_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPCR1
-	ldr	r1, =CFG_GPCR1_VAL
+	ldr	r1, =CONFIG_SYS_GPCR1_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPCR2
-	ldr	r1, =CFG_GPCR2_VAL
+	ldr	r1, =CONFIG_SYS_GPCR2_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPDR0
-	ldr	r1, =CFG_GPDR0_VAL
+	ldr	r1, =CONFIG_SYS_GPDR0_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPDR1
-	ldr	r1, =CFG_GPDR1_VAL
+	ldr	r1, =CONFIG_SYS_GPDR1_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GPDR2
-	ldr	r1, =CFG_GPDR2_VAL
+	ldr	r1, =CONFIG_SYS_GPDR2_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GAFR0_L
-	ldr	r1, =CFG_GAFR0_L_VAL
+	ldr	r1, =CONFIG_SYS_GAFR0_L_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GAFR0_U
-	ldr	r1, =CFG_GAFR0_U_VAL
+	ldr	r1, =CONFIG_SYS_GAFR0_U_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GAFR1_L
-	ldr	r1, =CFG_GAFR1_L_VAL
+	ldr	r1, =CONFIG_SYS_GAFR1_L_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GAFR1_U
-	ldr	r1, =CFG_GAFR1_U_VAL
+	ldr	r1, =CONFIG_SYS_GAFR1_U_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GAFR2_L
-	ldr	r1, =CFG_GAFR2_L_VAL
+	ldr	r1, =CONFIG_SYS_GAFR2_L_VAL
 	str	r1, [r0]
 
 	ldr	r0, =GAFR2_U
-	ldr	r1, =CFG_GAFR2_U_VAL
+	ldr	r1, =CONFIG_SYS_GAFR2_U_VAL
 	str	r1, [r0]
 
 	ldr	r0, =PSSR			/* enable GPIO pins */
-	ldr	r1, =CFG_PSSR_VAL
+	ldr	r1, =CONFIG_SYS_PSSR_VAL
 	str	r1, [r0]
 
 	/* ---------------------------------------------------------------- */
@@ -147,17 +147,17 @@ mem_init:
 	/* MSC registers: timing, bus width, mem type                       */
 
 	/* MSC0: nCS(0,1)                                                   */
-	ldr	r2, =CFG_MSC0_VAL
+	ldr	r2, =CONFIG_SYS_MSC0_VAL
 	str	r2, [r1, #MSC0_OFFSET]
 	ldr	r2, [r1, #MSC0_OFFSET]		/* read back to ensure      */
 						/* that data latches        */
 	/* MSC1: nCS(2,3)                                                   */
-	ldr	r2, =CFG_MSC1_VAL
+	ldr	r2, =CONFIG_SYS_MSC1_VAL
 	str	r2, [r1, #MSC1_OFFSET]
 	ldr	r2, [r1, #MSC1_OFFSET]
 
 	/* MSC2: nCS(4,5)                                                   */
-	ldr	r2, =CFG_MSC2_VAL
+	ldr	r2, =CONFIG_SYS_MSC2_VAL
 	str	r2, [r1, #MSC2_OFFSET]
 	ldr	r2, [r1, #MSC2_OFFSET]
 
@@ -166,37 +166,37 @@ mem_init:
 	/* ---------------------------------------------------------------- */
 
 	/* MECR: Memory Expansion Card Register                             */
-	ldr	r2, =CFG_MECR_VAL
+	ldr	r2, =CONFIG_SYS_MECR_VAL
 	str	r2, [r1, #MECR_OFFSET]
 	ldr	r2, [r1, #MECR_OFFSET]
 
 	/* MCMEM0: Card Interface slot 0 timing                             */
-	ldr	r2, =CFG_MCMEM0_VAL
+	ldr	r2, =CONFIG_SYS_MCMEM0_VAL
 	str	r2, [r1, #MCMEM0_OFFSET]
 	ldr	r2, [r1, #MCMEM0_OFFSET]
 
 	/* MCMEM1: Card Interface slot 1 timing                             */
-	ldr	r2, =CFG_MCMEM1_VAL
+	ldr	r2, =CONFIG_SYS_MCMEM1_VAL
 	str	r2, [r1, #MCMEM1_OFFSET]
 	ldr	r2, [r1, #MCMEM1_OFFSET]
 
 	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
-	ldr	r2, =CFG_MCATT0_VAL
+	ldr	r2, =CONFIG_SYS_MCATT0_VAL
 	str	r2, [r1, #MCATT0_OFFSET]
 	ldr	r2, [r1, #MCATT0_OFFSET]
 
 	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
-	ldr	r2, =CFG_MCATT1_VAL
+	ldr	r2, =CONFIG_SYS_MCATT1_VAL
 	str	r2, [r1, #MCATT1_OFFSET]
 	ldr	r2, [r1, #MCATT1_OFFSET]
 
 	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
-	ldr	r2, =CFG_MCIO0_VAL
+	ldr	r2, =CONFIG_SYS_MCIO0_VAL
 	str	r2, [r1, #MCIO0_OFFSET]
 	ldr	r2, [r1, #MCIO0_OFFSET]
 
 	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
-	ldr	r2, =CFG_MCIO1_VAL
+	ldr	r2, =CONFIG_SYS_MCIO1_VAL
 	str	r2, [r1, #MCIO1_OFFSET]
 	ldr	r2, [r1, #MCIO1_OFFSET]
 
@@ -212,7 +212,7 @@ mem_init:
 	/* Before accessing MDREFR we need a valid DRI field, so we set     */
 	/* this to power on defaults + DRI field, set SDRAM clocks free running */
 
-	ldr	r3, =CFG_MDREFR_VAL
+	ldr	r3, =CONFIG_SYS_MDREFR_VAL
 	ldr	r2, =0xFFF
 	and	r3, r3,  r2
 
@@ -243,7 +243,7 @@ mem_init:
 
 	/* set MDREFR according to user define with exception of a few bits */
 
-	ldr     r4, =CFG_MDREFR_VAL
+	ldr     r4, =CONFIG_SYS_MDREFR_VAL
 	ldr	r2, =(MDREFR_K0RUN|MDREFR_K0DB2|MDREFR_K1RUN|MDREFR_K1DB2|\
 					MDREFR_K2RUN |MDREFR_K2DB2)
 	and	r4, r4, r2
@@ -262,7 +262,7 @@ mem_init:
 
 	/* Step 4c: assert MDREFR:E1PIN and E0PIO as desired, set KXFREE  */
 
-	ldr     r4, =CFG_MDREFR_VAL
+	ldr     r4, =CONFIG_SYS_MDREFR_VAL
 	ldr	r2, =(MDREFR_E0PIN|MDREFR_E1PIN|MDREFR_K0FREE| \
 			MDREFR_K1FREE | MDREFR_K2FREE)
 	and	r4, r4, r2
@@ -274,7 +274,7 @@ mem_init:
 	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
 	/*          configure but not enable each SDRAM partition pair.     */
 
-	ldr	r4, =CFG_MDCNFG_VAL
+	ldr	r4, =CONFIG_SYS_MDCNFG_VAL
 	bic	r4, r4, #(MDCNFG_DE0|MDCNFG_DE1)
 	bic	r4, r4, #(MDCNFG_DE2|MDCNFG_DE3)
 	str     r4, [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
@@ -301,7 +301,7 @@ mem_init:
 	/*          documented in SDRAM data sheets. The address(es) used   */
 	/*          for this purpose must not be cacheable.                 */
 
-	ldr	r3, =CFG_DRAM_BASE
+	ldr	r3, =CONFIG_SYS_DRAM_BASE
 .rept 8
 	str	r2, [r3]
 .endr
@@ -315,7 +315,7 @@ mem_init:
 
 	/* Step 4h: Write MDMRS.                                            */
 
-	ldr     r2, =CFG_MDMRS_VAL
+	ldr     r2, =CONFIG_SYS_MDMRS_VAL
 	str     r2, [r1, #MDMRS_OFFSET]
 
 
diff --git a/board/cerf250/u-boot.lds b/board/cerf250/u-boot.lds
index 14d264a..7cf9fdf 100644
--- a/board/cerf250/u-boot.lds
+++ b/board/cerf250/u-boot.lds
@@ -51,6 +51,6 @@ SECTIONS
 
 	. = ALIGN(4);
 	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
+	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 }