summaryrefslogtreecommitdiff
path: root/board/boundary
diff options
context:
space:
mode:
authorEric Nelson <eric.nelson@boundarydevices.com>2014-10-02 12:16:24 -0700
committerStefano Babic <sbabic@denx.de>2014-10-06 17:57:21 +0200
commit41612472b6de135598d0dcf24da783a9802badc8 (patch)
tree58a193e5500f5bd2dc768673d870256d6d816fe6 /board/boundary
parent213e9e334822ba6a08d8d222d392dc30db8aa381 (diff)
downloadu-boot-imx-41612472b6de135598d0dcf24da783a9802badc8.zip
u-boot-imx-41612472b6de135598d0dcf24da783a9802badc8.tar.gz
u-boot-imx-41612472b6de135598d0dcf24da783a9802badc8.tar.bz2
nitrogen6x: configure SD2 pads for SDIO on USDHC2
Pads SD2_CLK/CMD/DAT0-3 are connected to an SDIO WiFi device on Nitrogen and unconnected on BD-SL-i.MX6 (sabre lite). Configure them as SDIO pins to prevent them from being in a state that confuses the WiFi part. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Diffstat (limited to 'board/boundary')
-rw-r--r--board/boundary/nitrogen6x/nitrogen6x.c11
1 files changed, 11 insertions, 0 deletions
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index e8cc243..bde299f 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -124,6 +124,15 @@ struct i2c_pads_info i2c_pad_info2 = {
}
};
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+ MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
iomux_v3_cfg_t const usdhc3_pads[] = {
MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -657,6 +666,8 @@ int board_init(void)
#ifdef CONFIG_MXC_SPI
setup_spi();
#endif
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);