diff options
author | Marian Balakowicz <m8@semihalf.com> | 2008-02-21 17:18:01 +0100 |
---|---|---|
committer | Marian Balakowicz <m8@semihalf.com> | 2008-02-21 17:18:01 +0100 |
commit | 20c93959330aba8b5bbdbfde1ef319e99eba235d (patch) | |
tree | ef82297e3aeb904f94584e6d136fac55ec32c317 /board/bf537-stamp | |
parent | 5cf746c303710329f8040d9c62ee354313e3e91f (diff) | |
parent | 928d1d77f8623c120d8763e20e1ca58df9c5c4c6 (diff) | |
download | u-boot-imx-20c93959330aba8b5bbdbfde1ef319e99eba235d.zip u-boot-imx-20c93959330aba8b5bbdbfde1ef319e99eba235d.tar.gz u-boot-imx-20c93959330aba8b5bbdbfde1ef319e99eba235d.tar.bz2 |
Merge branch 'master' of /home/git/u-boot
Diffstat (limited to 'board/bf537-stamp')
-rw-r--r-- | board/bf537-stamp/.gitignore | 1 | ||||
-rw-r--r-- | board/bf537-stamp/bf537-stamp.c | 9 | ||||
-rw-r--r-- | board/bf537-stamp/ether_bf537.c | 6 | ||||
-rw-r--r-- | board/bf537-stamp/flash.c | 2 | ||||
-rw-r--r-- | board/bf537-stamp/nand.c | 4 | ||||
-rw-r--r-- | board/bf537-stamp/post-memory.c | 18 | ||||
-rw-r--r-- | board/bf537-stamp/stm_m25p64.c | 43 |
7 files changed, 45 insertions, 38 deletions
diff --git a/board/bf537-stamp/.gitignore b/board/bf537-stamp/.gitignore new file mode 100644 index 0000000..945f324 --- /dev/null +++ b/board/bf537-stamp/.gitignore @@ -0,0 +1 @@ +/u-boot.lds diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c index 6954b30..d279817 100644 --- a/board/bf537-stamp/bf537-stamp.c +++ b/board/bf537-stamp/bf537-stamp.c @@ -32,6 +32,7 @@ #include <asm/io.h> #include <net.h> #include "ether_bf537.h" +#include <asm/mach-common/bits/bootrom.h> /** * is_valid_ether_addr - Determine if the given Ethernet address is valid @@ -117,7 +118,7 @@ int checkboard(void) void cf_outb(unsigned char val, volatile unsigned char *addr) { *(addr) = val; - sync(); + SSYNC(); } unsigned char cf_inb(volatile unsigned char *addr) @@ -125,7 +126,7 @@ unsigned char cf_inb(volatile unsigned char *addr) volatile unsigned char c; c = *(addr); - sync(); + SSYNC(); return c; } @@ -136,7 +137,7 @@ void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words) for (i = 0; i < words; i++) *(sect_buf + i) = *(addr); - sync(); + SSYNC(); } void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words) @@ -145,7 +146,7 @@ void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words) for (i = 0; i < words; i++) *(addr) = *(sect_buf + i); - sync(); + SSYNC(); } #endif /* CONFIG_BFIN_IDE */ diff --git a/board/bf537-stamp/ether_bf537.c b/board/bf537-stamp/ether_bf537.c index 36c1536..6c514c6 100644 --- a/board/bf537-stamp/ether_bf537.c +++ b/board/bf537-stamp/ether_bf537.c @@ -30,6 +30,10 @@ #include <malloc.h> #include "ether_bf537.h" +#include <asm/mach-common/bits/dma.h> +#include <asm/mach-common/bits/emac.h> +#include <asm/mach-common/bits/pll.h> + #ifdef CONFIG_POST #include <post.h> #endif @@ -364,7 +368,7 @@ int SetupSystemRegs(int *opmode) u16 sysctl, phydat; int count = 0; /* Enable PHY output */ - *pVR_CTL |= PHYCLKOE; + *pVR_CTL |= CLKBUFOE; /* MDC = 2.5 MHz */ sysctl = SET_MDCDIV(24); /* Odd word alignment for Receive Frame DMA word */ diff --git a/board/bf537-stamp/flash.c b/board/bf537-stamp/flash.c index ed85841..8252c42 100644 --- a/board/bf537-stamp/flash.c +++ b/board/bf537-stamp/flash.c @@ -255,7 +255,7 @@ int write_flash(long nOffset, int nValue) addr = (CFG_FLASH_BASE + nOffset); *(unsigned volatile short *)addr = nValue; - sync(); + SSYNC(); #if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) if (icache_status()) udelay(CONFIG_CCLK_HZ / 1000000); diff --git a/board/bf537-stamp/nand.c b/board/bf537-stamp/nand.c index f95b584..6ff0f4f 100644 --- a/board/bf537-stamp/nand.c +++ b/board/bf537-stamp/nand.c @@ -64,13 +64,13 @@ static void bfin_hwcontrol(struct mtd_info *mtd, int cmd) this->IO_ADDR_R = this->IO_ADDR_W; /* Drain the writebuffer */ - sync(); + SSYNC(); } int bfin_device_ready(struct mtd_info *mtd) { int ret = (*PORT(CONFIG_NAND_GPIO_PORT, IO) & BFIN_NAND_READY) ? 1 : 0; - sync(); + SSYNC(); return ret; } diff --git a/board/bf537-stamp/post-memory.c b/board/bf537-stamp/post-memory.c index 6039350..fa11991 100644 --- a/board/bf537-stamp/post-memory.c +++ b/board/bf537-stamp/post-memory.c @@ -104,15 +104,15 @@ void post_init_uart(int sclk) *pUART_GCTL = 0x00; *pUART_LCR = 0x83; - sync(); + SSYNC(); *pUART_DLL = (divisor & 0xFF); - sync(); + SSYNC(); *pUART_DLH = ((divisor >> 8) & 0xFF); - sync(); + SSYNC(); *pUART_LCR = 0x03; - sync(); + SSYNC(); *pUART_GCTL = 0x01; - sync(); + SSYNC(); } void post_out_buff(char *buff) @@ -124,7 +124,7 @@ void post_out_buff(char *buff) while ((buff[i] != '\0') && (i != 100)) { while (!(*pUART_LSR & 0x20)) ; *pUART_THR = buff[i]; - sync(); + SSYNC(); i++; } for (i = 0; i < 0x80000; i++) ; @@ -141,7 +141,7 @@ int post_key_pressed(void) *pPORTF_FER &= ~PF5; *pPORTFIO_DIR &= ~PF5; *pPORTFIO_INEN |= PF5; - sync(); + SSYNC(); post_out_buff("########Press SW10 to enter Memory POST########: 3\0"); for (i = 0; i < KEY_LOOP; i++) { @@ -303,7 +303,7 @@ int post_init_sdram(int sclk) (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS); - sync(); + SSYNC(); *pEBIU_SDGCTL |= 0x1000000; /* Set the SDRAM Refresh Rate control register based on SSCLK value */ @@ -314,7 +314,7 @@ int post_init_sdram(int sclk) /* SDRAM Memory Global Control Register */ *pEBIU_SDGCTL = mem_SDGCTL; - sync(); + SSYNC(); return mem_SDRRC; } diff --git a/board/bf537-stamp/stm_m25p64.c b/board/bf537-stamp/stm_m25p64.c index d9c08ee..c48c3c7 100644 --- a/board/bf537-stamp/stm_m25p64.c +++ b/board/bf537-stamp/stm_m25p64.c @@ -4,6 +4,7 @@ #include <common.h> #include <linux/ctype.h> #include <asm/io.h> +#include <asm/mach-common/bits/spi.h> #if defined(CONFIG_SPI) @@ -142,7 +143,7 @@ void SendSingleCommand(const int iCommand) /* sends the actual command to the SPI TX register */ *pSPI_TDBR = iCommand; - sync(); + SSYNC(); /* The SPI status register will be polled to check the SPIF bit */ Wait_For_SPIF(); @@ -164,10 +165,10 @@ void SetupSPI(const int spi_setting) *pSPI_FLG = 0xFF02; *pSPI_BAUD = CONFIG_SPI_BAUD; *pSPI_CTL = spi_setting; - sync(); + SSYNC(); *pSPI_FLG = 0xFD02; - sync(); + SSYNC(); } void SPI_OFF(void) @@ -176,7 +177,7 @@ void SPI_OFF(void) *pSPI_CTL = 0x0400; /* disable SPI */ *pSPI_FLG = 0; *pSPI_BAUD = 0; - sync(); + SSYNC(); udelay(CONFIG_CCLK_HZ / 50000000); } @@ -234,10 +235,10 @@ char ReadStatusRegister(void) SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); /* Turn on the SPI */ *pSPI_TDBR = SPI_RDSR; /* send instruction to read status register */ - sync(); + SSYNC(); Wait_For_SPIF(); /*wait until the instruction has been sent */ *pSPI_TDBR = 0; /*send dummy to receive the status register */ - sync(); + SSYNC(); Wait_For_SPIF(); /*wait until the data has been sent */ status_register = *pSPI_RDBR; /*read the status register */ @@ -300,23 +301,23 @@ ERROR_CODE EraseBlock(int nBlock) * to point to the start of a sector */ *pSPI_TDBR = SPI_SE; - sync(); + SSYNC(); Wait_For_SPIF(); /* Send the highest byte of the 24 bit address at first */ ShiftValue = (ulSectorOff >> 16); *pSPI_TDBR = ShiftValue; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); /* Send the middle byte of the 24 bit address at second */ ShiftValue = (ulSectorOff >> 8); *pSPI_TDBR = ShiftValue; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); /* Send the lowest byte of the 24 bit address finally */ *pSPI_TDBR = ulSectorOff; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); @@ -357,33 +358,33 @@ ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData) /* Send the read command to SPI device */ *pSPI_TDBR = SPI_READ; #endif - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); /* Send the highest byte of the 24 bit address at first */ ShiftValue = (ulStart >> 16); /* Send the byte to the SPI device */ *pSPI_TDBR = ShiftValue; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); /* Send the middle byte of the 24 bit address at second */ ShiftValue = (ulStart >> 8); /* Send the byte to the SPI device */ *pSPI_TDBR = ShiftValue; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); /* Send the lowest byte of the 24 bit address finally */ *pSPI_TDBR = ulStart; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); #ifdef CONFIG_SPI_FLASH_FAST_READ /* Send dummy for FAST_READ */ *pSPI_TDBR = 0; - sync(); + SSYNC(); /* Wait until the instruction has been sent */ Wait_For_SPIF(); #endif @@ -392,7 +393,7 @@ ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData) /* received on the MISO pin. */ for (i = 0; i < lCount; i++) { *pSPI_TDBR = 0; - sync(); + SSYNC(); while (!(*pSPI_STAT & RXS)) ; *cnData++ = *pSPI_RDBR; @@ -435,22 +436,22 @@ ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount, */ SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); *pSPI_TDBR = SPI_PP; - sync(); + SSYNC(); /*wait until the instruction has been sent */ Wait_For_SPIF(); ulWAddr = (ulStartAddr >> 16); *pSPI_TDBR = ulWAddr; - sync(); + SSYNC(); /*wait until the instruction has been sent */ Wait_For_SPIF(); ulWAddr = (ulStartAddr >> 8); *pSPI_TDBR = ulWAddr; - sync(); + SSYNC(); /*wait until the instruction has been sent */ Wait_For_SPIF(); ulWAddr = ulStartAddr; *pSPI_TDBR = ulWAddr; - sync(); + SSYNC(); /*wait until the instruction has been sent */ Wait_For_SPIF(); /* @@ -460,7 +461,7 @@ ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount, for (i = 0; (i < lTransferCount) && (i < 256); i++, lWTransferCount++) { iData = *temp; *pSPI_TDBR = iData; - sync(); + SSYNC(); /*wait until the instruction has been sent */ Wait_For_SPIF(); temp++; |