summaryrefslogtreecommitdiff
path: root/board/bf533-stamp/spi.c
diff options
context:
space:
mode:
authorAubrey.Li <aubrey.adi@gmail.com>2007-03-09 13:38:44 +0800
committerAubrey.Li <aubrey.adi@gmail.com>2007-03-09 13:38:44 +0800
commit3f0606ad0b5639f7f22848fe5b4574e754d0470f (patch)
tree3cb4fd316134b6a176607ad61739720aeb971a5a /board/bf533-stamp/spi.c
parenteb92f613556800f7483666db09d9a237ad911d4a (diff)
downloadu-boot-imx-3f0606ad0b5639f7f22848fe5b4574e754d0470f.zip
u-boot-imx-3f0606ad0b5639f7f22848fe5b4574e754d0470f.tar.gz
u-boot-imx-3f0606ad0b5639f7f22848fe5b4574e754d0470f.tar.bz2
[Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
Diffstat (limited to 'board/bf533-stamp/spi.c')
-rw-r--r--board/bf533-stamp/spi.c472
1 files changed, 472 insertions, 0 deletions
diff --git a/board/bf533-stamp/spi.c b/board/bf533-stamp/spi.c
new file mode 100644
index 0000000..1b585aa
--- /dev/null
+++ b/board/bf533-stamp/spi.c
@@ -0,0 +1,472 @@
+/****************************************************************************
+ * SPI flash driver for M25P64
+ ****************************************************************************/
+#include <common.h>
+#include <linux/ctype.h>
+
+#if defined(CONFIG_SPI)
+
+ /*Application definitions */
+
+#define NUM_SECTORS 128 /* number of sectors */
+#define SECTOR_SIZE 0x10000
+#define NOP_NUM 1000
+
+#define COMMON_SPI_SETTINGS (SPE|MSTR|CPHA|CPOL) /*Settings to the SPI_CTL */
+#define TIMOD01 (0x01) /*stes the SPI to work with core instructions */
+
+ /*Flash commands */
+#define SPI_WREN (0x06) /*Set Write Enable Latch */
+#define SPI_WRDI (0x04) /*Reset Write Enable Latch */
+#define SPI_RDSR (0x05) /*Read Status Register */
+#define SPI_WRSR (0x01) /*Write Status Register */
+#define SPI_READ (0x03) /*Read data from memory */
+#define SPI_PP (0x02) /*Program Data into memory */
+#define SPI_SE (0xD8) /*Erase one sector in memory */
+#define SPI_BE (0xC7) /*Erase all memory */
+#define WIP (0x1) /*Check the write in progress bit of the SPI status register */
+#define WEL (0x2) /*Check the write enable bit of the SPI status register */
+
+#define TIMEOUT 350000000
+
+typedef enum {
+ NO_ERR,
+ POLL_TIMEOUT,
+ INVALID_SECTOR,
+ INVALID_BLOCK,
+} ERROR_CODE;
+
+void spi_init_f(void);
+void spi_init_r(void);
+ssize_t spi_read(uchar *, int, uchar *, int);
+ssize_t spi_write(uchar *, int, uchar *, int);
+
+char ReadStatusRegister(void);
+void Wait_For_SPIF(void);
+void SetupSPI(const int spi_setting);
+void SPI_OFF(void);
+void SendSingleCommand(const int iCommand);
+
+ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector);
+ERROR_CODE EraseBlock(int nBlock);
+ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData);
+ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData);
+ERROR_CODE Wait_For_Status(char Statusbit);
+ERROR_CODE Wait_For_WEL(void);
+
+/* -------------------
+ * Variables
+ * ------------------- */
+
+/* **************************************************************************
+ *
+ * Function: spi_init_f
+ *
+ * Description: Init SPI-Controller (ROM part)
+ *
+ * return: ---
+ *
+ * *********************************************************************** */
+void spi_init_f(void)
+{
+}
+
+/* **************************************************************************
+ *
+ * Function: spi_init_r
+ *
+ * Description: Init SPI-Controller (RAM part) -
+ * The malloc engine is ready and we can move our buffers to
+ * normal RAM
+ *
+ * return: ---
+ *
+ * *********************************************************************** */
+void spi_init_r(void)
+{
+ return;
+}
+
+/****************************************************************************
+ * Function: spi_write
+ **************************************************************************** */
+ssize_t spi_write(uchar * addr, int alen, uchar * buffer, int len)
+{
+ unsigned long offset;
+ int start_block, end_block;
+ int start_byte, end_byte;
+ ERROR_CODE result = NO_ERR;
+ uchar temp[SECTOR_SIZE];
+ int i, num;
+
+ offset = addr[0] << 16 | addr[1] << 8 | addr[2];
+ /* Get the start block number */
+ result = GetSectorNumber(offset, &start_block);
+ if (result == INVALID_SECTOR) {
+ printf("Invalid sector! ");
+ return 0;
+ }
+ /* Get the end block number */
+ result = GetSectorNumber(offset + len - 1, &end_block);
+ if (result == INVALID_SECTOR) {
+ printf("Invalid sector! ");
+ return 0;
+ }
+
+ for (num = start_block; num <= end_block; num++) {
+ ReadData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp);
+ start_byte = num * SECTOR_SIZE;
+ end_byte = (num + 1) * SECTOR_SIZE - 1;
+ if (start_byte < offset)
+ start_byte = offset;
+ if (end_byte > (offset + len))
+ end_byte = (offset + len - 1);
+ for (i = start_byte; i <= end_byte; i++)
+ temp[i - num * SECTOR_SIZE] = buffer[i - offset];
+ EraseBlock(num);
+ result = WriteData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp);
+ if (result != NO_ERR)
+ return 0;
+ printf(".");
+ }
+ return len;
+}
+
+/****************************************************************************
+ * Function: spi_read
+ **************************************************************************** */
+ssize_t spi_read(uchar * addr, int alen, uchar * buffer, int len)
+{
+ unsigned long offset;
+ offset = addr[0] << 16 | addr[1] << 8 | addr[2];
+ ReadData(offset, len, (int *)buffer);
+ return len;
+}
+
+void SendSingleCommand(const int iCommand)
+{
+ unsigned short dummy;
+
+ /*turns on the SPI in single write mode */
+ SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
+
+ /*sends the actual command to the SPI TX register */
+ *pSPI_TDBR = iCommand;
+ __builtin_bfin_ssync();
+
+ /*The SPI status register will be polled to check the SPIF bit */
+ Wait_For_SPIF();
+
+ dummy = *pSPI_RDBR;
+
+ /*The SPI will be turned off */
+ SPI_OFF();
+
+}
+
+void SetupSPI(const int spi_setting)
+{
+
+ if (icache_status() || dcache_status())
+ udelay(CONFIG_CCLK_HZ / 50000000);
+ /*sets up the PF2 to be the slave select of the SPI */
+ *pSPI_FLG = 0xFB04;
+ *pSPI_BAUD = CONFIG_SPI_BAUD;
+ *pSPI_CTL = spi_setting;
+ __builtin_bfin_ssync();
+}
+
+void SPI_OFF(void)
+{
+
+ *pSPI_CTL = 0x0400; /* disable SPI */
+ *pSPI_FLG = 0;
+ *pSPI_BAUD = 0;
+ __builtin_bfin_ssync();
+ udelay(CONFIG_CCLK_HZ / 50000000);
+
+}
+
+void Wait_For_SPIF(void)
+{
+ unsigned short dummyread;
+ while ((*pSPI_STAT & TXS)) ;
+ while (!(*pSPI_STAT & SPIF)) ;
+ while (!(*pSPI_STAT & RXS)) ;
+ dummyread = *pSPI_RDBR; /* Read dummy to empty the receive register */
+
+}
+
+ERROR_CODE Wait_For_WEL(void)
+{
+ int i;
+ char status_register = 0;
+ ERROR_CODE ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */
+
+ for (i = 0; i < TIMEOUT; i++) {
+ status_register = ReadStatusRegister();
+ if ((status_register & WEL)) {
+ ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */
+ break;
+ }
+ ErrorCode = POLL_TIMEOUT; /* Time out error */
+ };
+
+ return ErrorCode;
+}
+
+ERROR_CODE Wait_For_Status(char Statusbit)
+{
+ int i;
+ char status_register = 0xFF;
+ ERROR_CODE ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */
+
+ for (i = 0; i < TIMEOUT; i++) {
+ status_register = ReadStatusRegister();
+ if (!(status_register & Statusbit)) {
+ ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */
+ break;
+ }
+ ErrorCode = POLL_TIMEOUT; /* Time out error */
+ };
+
+ return ErrorCode;
+}
+
+char ReadStatusRegister(void)
+{
+ char status_register = 0;
+
+ SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); /* Turn on the SPI */
+
+ *pSPI_TDBR = SPI_RDSR; /* send instruction to read status register */
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /*wait until the instruction has been sent */
+ *pSPI_TDBR = 0; /*send dummy to receive the status register */
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /*wait until the data has been sent */
+ status_register = *pSPI_RDBR; /*read the status register */
+
+ SPI_OFF(); /* Turn off the SPI */
+
+ return status_register;
+}
+
+ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector)
+{
+ int nSector = 0;
+ ERROR_CODE ErrorCode = NO_ERR;
+
+ if (ulOffset > (NUM_SECTORS * 0x10000 - 1)) {
+ ErrorCode = INVALID_SECTOR;
+ return ErrorCode;
+ }
+
+ nSector = (int)ulOffset / 0x10000;
+ *pnSector = nSector;
+
+ /* ok */
+ return ErrorCode;
+}
+
+ERROR_CODE EraseBlock(int nBlock)
+{
+ unsigned long ulSectorOff = 0x0, ShiftValue;
+ ERROR_CODE ErrorCode = NO_ERR;
+
+ /* if the block is invalid just return */
+ if ((nBlock < 0) || (nBlock > NUM_SECTORS)) {
+ ErrorCode = INVALID_BLOCK; /* tells us if there was an error erasing flash */
+ return ErrorCode;
+ }
+ /* figure out the offset of the block in flash */
+ if ((nBlock >= 0) && (nBlock < NUM_SECTORS)) {
+ ulSectorOff = (nBlock * SECTOR_SIZE);
+
+ } else {
+ ErrorCode = INVALID_BLOCK; /* tells us if there was an error erasing flash */
+ return ErrorCode;
+ }
+
+ /* A write enable instruction must previously have been executed */
+ SendSingleCommand(SPI_WREN);
+
+ /*The status register will be polled to check the write enable latch "WREN" */
+ ErrorCode = Wait_For_WEL();
+
+ if (POLL_TIMEOUT == ErrorCode) {
+ printf("SPI Erase block error\n");
+ return ErrorCode;
+ } else
+ /*Turn on the SPI to send single commands */
+ SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
+
+ /* Send the erase block command to the flash followed by the 24 address */
+ /* to point to the start of a sector. */
+ *pSPI_TDBR = SPI_SE;
+ __builtin_bfin_ssync();
+ Wait_For_SPIF();
+ ShiftValue = (ulSectorOff >> 16); /* Send the highest byte of the 24 bit address at first */
+ *pSPI_TDBR = ShiftValue;
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /* Wait until the instruction has been sent */
+ ShiftValue = (ulSectorOff >> 8); /* Send the middle byte of the 24 bit address at second */
+ *pSPI_TDBR = ShiftValue;
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /* Wait until the instruction has been sent */
+ *pSPI_TDBR = ulSectorOff; /* Send the lowest byte of the 24 bit address finally */
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /* Wait until the instruction has been sent */
+
+ /*Turns off the SPI */
+ SPI_OFF();
+
+ /* Poll the status register to check the Write in Progress bit */
+ /* Sector erase takes time */
+ ErrorCode = Wait_For_Status(WIP);
+
+ /* block erase should be complete */
+ return ErrorCode;
+}
+
+/*****************************************************************************
+* ERROR_CODE ReadData()
+*
+* Read a value from flash for verify purpose
+*
+* Inputs: unsigned long ulStart - holds the SPI start address
+* int pnData - pointer to store value read from flash
+* long lCount - number of elements to read
+***************************************************************************** */
+ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData)
+{
+ unsigned long ShiftValue;
+ char *cnData;
+ int i;
+
+ cnData = (char *)pnData; /* Pointer cast to be able to increment byte wise */
+
+ /* Start SPI interface */
+ SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
+
+ *pSPI_TDBR = SPI_READ; /* Send the read command to SPI device */
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /* Wait until the instruction has been sent */
+ ShiftValue = (ulStart >> 16); /* Send the highest byte of the 24 bit address at first */
+ *pSPI_TDBR = ShiftValue; /* Send the byte to the SPI device */
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /* Wait until the instruction has been sent */
+ ShiftValue = (ulStart >> 8); /* Send the middle byte of the 24 bit address at second */
+ *pSPI_TDBR = ShiftValue; /* Send the byte to the SPI device */
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /* Wait until the instruction has been sent */
+ *pSPI_TDBR = ulStart; /* Send the lowest byte of the 24 bit address finally */
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /* Wait until the instruction has been sent */
+
+ /* After the SPI device address has been placed on the MOSI pin the data can be */
+ /* received on the MISO pin. */
+ for (i = 0; i < lCount; i++) {
+ *pSPI_TDBR = 0; /*send dummy */
+ __builtin_bfin_ssync();
+ while (!(*pSPI_STAT & RXS)) ;
+ *cnData++ = *pSPI_RDBR; /*read */
+
+ if ((i >= SECTOR_SIZE) && (i % SECTOR_SIZE == 0))
+ printf(".");
+ }
+
+ SPI_OFF(); /* Turn off the SPI */
+
+ return NO_ERR;
+}
+
+ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount,
+ int *iDataSource, long *lWriteCount)
+{
+
+ unsigned long ulWAddr;
+ long lWTransferCount = 0;
+ int i;
+ char iData;
+ char *temp = (char *)iDataSource;
+ ERROR_CODE ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */
+
+ /* First, a Write Enable Command must be sent to the SPI. */
+ SendSingleCommand(SPI_WREN);
+
+ /* Second, the SPI Status Register will be tested whether the */
+ /* Write Enable Bit has been set. */
+ ErrorCode = Wait_For_WEL();
+ if (POLL_TIMEOUT == ErrorCode) {
+ printf("SPI Write Time Out\n");
+ return ErrorCode;
+ } else
+ /* Third, the 24 bit address will be shifted out the SPI MOSI bytewise. */
+ SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); /* Turns the SPI on */
+ *pSPI_TDBR = SPI_PP;
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /*wait until the instruction has been sent */
+ ulWAddr = (ulStartAddr >> 16);
+ *pSPI_TDBR = ulWAddr;
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /*wait until the instruction has been sent */
+ ulWAddr = (ulStartAddr >> 8);
+ *pSPI_TDBR = ulWAddr;
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /*wait until the instruction has been sent */
+ ulWAddr = ulStartAddr;
+ *pSPI_TDBR = ulWAddr;
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /*wait until the instruction has been sent */
+ /* Fourth, maximum number of 256 bytes will be taken from the Buffer */
+ /* and sent to the SPI device. */
+ for (i = 0; (i < lTransferCount) && (i < 256); i++, lWTransferCount++) {
+ iData = *temp;
+ *pSPI_TDBR = iData;
+ __builtin_bfin_ssync();
+ Wait_For_SPIF(); /*wait until the instruction has been sent */
+ temp++;
+ }
+
+ SPI_OFF(); /* Turns the SPI off */
+
+ /* Sixth, the SPI Write in Progress Bit must be toggled to ensure the */
+ /* programming is done before start of next transfer. */
+ ErrorCode = Wait_For_Status(WIP);
+
+ if (POLL_TIMEOUT == ErrorCode) {
+ printf("SPI Program Time out!\n");
+ return ErrorCode;
+ } else
+
+ *lWriteCount = lWTransferCount;
+
+ return ErrorCode;
+}
+
+ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData)
+{
+
+ unsigned long ulWStart = ulStart;
+ long lWCount = lCount, lWriteCount;
+ long *pnWriteCount = &lWriteCount;
+
+ ERROR_CODE ErrorCode = NO_ERR;
+
+ while (lWCount != 0) {
+ ErrorCode = WriteFlash(ulWStart, lWCount, pnData, pnWriteCount);
+
+ /* After each function call of WriteFlash the counter must be adjusted */
+ lWCount -= *pnWriteCount;
+
+ /* Also, both address pointers must be recalculated. */
+ ulWStart += *pnWriteCount;
+ pnData += *pnWriteCount / 4;
+ }
+
+ /* return the appropriate error code */
+ return ErrorCode;
+}
+
+#endif /* CONFIG_SPI */