Merge branch 'master' of git://git.denx.de/u-boot-avr32

4 files changed, 24 insertions, 20 deletions

diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index fa1a2aa..004d8da 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -26,6 +26,7 @@
 #include <asm/arch/clk.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/hmatrix.h>
+#include <asm/arch/portmux.h>
 #include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -51,18 +52,18 @@ int board_early_init_f(void)
 	/* Enable SDRAM in the EBI mux */
 	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
-	gpio_enable_ebi();
-	gpio_enable_usart1();
+	portmux_enable_ebi(16, 23, 0, PORTMUX_DRIVE_HIGH);
+	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
 
 #if defined(CONFIG_MACB)
-	gpio_enable_macb0();
-	gpio_enable_macb1();
+	portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
+	portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
 #endif
 #if defined(CONFIG_MMC)
-	gpio_enable_mmci();
+	portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
 #endif
 #if defined(CONFIG_ATMEL_SPI)
-	gpio_enable_spi0(1 << 0);
+	portmux_enable_spi0(1 << 0, PORTMUX_DRIVE_LOW);
 #endif
 
 	return 0;
@@ -88,10 +89,11 @@ phys_size_t initdram(int board_type)
 	return actual_size;
 }
 
-void board_init_info(void)
+int board_early_init_r(void)
 {
 	gd->bd->bi_phy_id[0] = 0x01;
 	gd->bd->bi_phy_id[1] = 0x03;
+	return 0;
 }
 
 #ifdef CONFIG_CMD_NET
@@ -107,7 +109,7 @@ int board_eth_init(bd_t *bi)
 #ifdef CONFIG_ATMEL_SPI
 #include <spi.h>
 
-#define ATNGW100_DATAFLASH_CS_PIN	GPIO_PIN_PA3
+#define ATNGW100_DATAFLASH_CS_PIN	GPIO_PIN_PA(3)
 
 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 {
diff --git a/board/atmel/atstk1000/Makefile b/board/atmel/atstk1000/Makefile
index 155d46a..f9b26e5 100644
--- a/board/atmel/atstk1000/Makefile
+++ b/board/atmel/atstk1000/Makefile
@@ -24,12 +24,13 @@
 
 include $(TOPDIR)/config.mk
 
-LIB	:= $(obj)lib$(BOARD).a
+LIB			:= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o flash.o
+COBJS-y			+= $(BOARD).o
+COBJS-y			+= flash.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+SRCS			:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS			:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
 
 $(LIB): $(obj).depend $(OBJS)
 	$(AR) $(ARFLAGS) $@ $(OBJS)
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 94523b5..c36cb57 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -24,8 +24,8 @@
 #include <asm/io.h>
 #include <asm/sdram.h>
 #include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
 #include <asm/arch/hmatrix.h>
+#include <asm/arch/portmux.h>
 #include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -78,14 +78,14 @@ int board_early_init_f(void)
 	/* Enable SDRAM in the EBI mux */
 	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
-	gpio_enable_ebi();
-	gpio_enable_usart1();
+	portmux_enable_ebi(sdram_config.data_bits, 23, 0, PORTMUX_DRIVE_HIGH);
+	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
 #if defined(CONFIG_MACB)
-	gpio_enable_macb0();
-	gpio_enable_macb1();
+	portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
+	portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
 #endif
 #if defined(CONFIG_MMC)
-	gpio_enable_mmci();
+	portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
 #endif
 
 	return 0;
@@ -111,10 +111,11 @@ phys_size_t initdram(int board_type)
 	return actual_size;
 }
 
-void board_init_info(void)
+int board_early_init_r(void)
 {
 	gd->bd->bi_phy_id[0] = 0x10;
 	gd->bd->bi_phy_id[1] = 0x11;
+	return 0;
 }
 
 #ifdef CONFIG_CMD_NET
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
index 4d380f3..0ba06dd 100644
--- a/board/atmel/atstk1000/flash.c
+++ b/board/atmel/atstk1000/flash.c
@@ -22,7 +22,7 @@
 #include <common.h>
 
 #ifdef CONFIG_ATSTK1000_EXT_FLASH
-#include <asm/cacheflush.h>
+#include <asm/arch/cacheflush.h>
 #include <asm/io.h>
 #include <asm/sections.h>