rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

4 files changed, 36 insertions, 36 deletions

diff --git a/board/atc/atc.c b/board/atc/atc.c
index b627c1c..936c031 100644
--- a/board/atc/atc.c
+++ b/board/atc/atc.c
@@ -281,7 +281,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 */
 	maxsize = (1 + (~orx | 0x7fff)) / 2;
 
-	/* Since CFG_SDRAM_BASE is always 0 (??), we assume that
+	/* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
 	 * we are configuring CS1 if base != 0
 	 */
 	sdmr_ptr = &memctl->memc_psdmr;
@@ -306,7 +306,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 *  accessing the SDRAM with a single-byte transaction."
 	 *
 	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
 	 */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -317,7 +317,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 		*base = c;
 
 	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CFG_MRS_OFFS) = c;	/* setting MR on address lines */
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
 
 	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
 	*base = c;
@@ -331,7 +331,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 
 int misc_init_r(void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
 	upmconfig(UPMA, (uint *)rtc_table, sizeof(rtc_table) / sizeof(uint));
@@ -342,37 +342,37 @@ int misc_init_r(void)
 
 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong size8, size9;
 #endif
 	long psize;
 
 	psize = 8 * 1024 * 1024;
 
-	memctl->memc_mptpr = CFG_MPTPR;
-	memctl->memc_psrt = CFG_PSRT;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	/* 60x SDRAM setup:
 	 */
-	size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
-			  (uchar *) CFG_SDRAM_BASE);
-	size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
-			  (uchar *) CFG_SDRAM_BASE);
+	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+			  (uchar *) CONFIG_SYS_SDRAM_BASE);
+	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL,
+			  (uchar *) CONFIG_SYS_SDRAM_BASE);
 
 	if (size8 < size9) {
 		psize = size9;
 		printf ("(60x:9COL) ");
 	} else {
-		psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
-				  (uchar *) CFG_SDRAM_BASE);
+		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+				  (uchar *) CONFIG_SYS_SDRAM_BASE);
 		printf ("(60x:8COL) ");
 	}
 
-#endif	/* CFG_RAMBOOT */
+#endif	/* CONFIG_SYS_RAMBOOT */
 
 	icache_enable ();
 
@@ -382,7 +382,7 @@ phys_size_t initdram (int board_type)
 #if defined(CONFIG_CMD_DOC)
 void doc_init (void)
 {
-	doc_probe (CFG_DOC_BASE);
+	doc_probe (CONFIG_SYS_DOC_BASE);
 }
 #endif
 
diff --git a/board/atc/config.mk b/board/atc/config.mk
index eee7a60..dd854e7 100644
--- a/board/atc/config.mk
+++ b/board/atc/config.mk
@@ -25,7 +25,7 @@
 # ATC boards
 #
 
-# This should be equal to the CFG_FLASH_BASE define in config_atc.h
+# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_atc.h
 # for the "final" configuration, with U-Boot in flash, or the address
 # in RAM where U-Boot is loaded at for debugging.
 #
diff --git a/board/atc/flash.c b/board/atc/flash.c
index 7835e8f..fd76723 100644
--- a/board/atc/flash.c
+++ b/board/atc/flash.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
  *        has nothing to do with the flash chip being 8-bit or 16-bit.
@@ -67,11 +67,11 @@ unsigned long flash_init (void)
 	int i;
 
 	/* Init: no FLASHes known */
-	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 #if 0
 		ulong flashbase = (i == 0) ? PHYS_FLASH_1 : PHYS_FLASH_2;
 #else
-		ulong flashbase = CFG_FLASH_BASE;
+		ulong flashbase = CONFIG_SYS_FLASH_BASE;
 #endif
 
 		memset(&flash_info[i], 0, sizeof(flash_info_t));
@@ -87,12 +87,12 @@ unsigned long flash_init (void)
 		size += flash_info[i].size;
 	}
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CFG_MONITOR_BASE));
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
 #ifdef	CONFIG_ENV_IS_IN_FLASH
@@ -164,13 +164,13 @@ static flash_info_t *flash_get_info(ulong base)
 	int i;
 	flash_info_t * info;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
 		info = & flash_info[i];
 		if (info->start[0] <= base && base < info->start[0] + info->size)
 			break;
 	}
 
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
 }
 
 /*-----------------------------------------------------------------------
@@ -476,7 +476,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 		udelay (1000);
 
 		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				printf ("Timeout\n");
 
 				if (intel) {
@@ -490,14 +490,14 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			}
 
 			/* show that we're waiting */
-			if ((get_timer(last)) > CFG_HZ) {/* every second */
+			if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */
 				putc ('.');
 				last = get_timer(0);
 			}
 		}
 
 		/* show that we're waiting */
-		if ((get_timer(last)) > CFG_HZ) {	/* every second */
+		if ((get_timer(last)) > CONFIG_SYS_HZ) {	/* every second */
 			putc ('.');
 			last = get_timer(0);
 		}
@@ -601,7 +601,7 @@ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
 
 	/* data polling for D7 */
 	while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW)0x00F000F0;	/* reset bank */
 			res = 1;
 		}
@@ -647,7 +647,7 @@ static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
 	start = get_timer (0);
 
 	while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*dest = (FPW)0x00B000B0;	/* Suspend program	*/
 			res = 1;
 		}
diff --git a/board/atc/ti113x.c b/board/atc/ti113x.c
index e112eca..473bb10 100644
--- a/board/atc/ti113x.c
+++ b/board/atc/ti113x.c
@@ -526,8 +526,8 @@ int i82365_init (void)
 	mem.map = 0;
 	mem.flags = MAP_ATTRIB | MAP_ACTIVE;
 	mem.speed = 300;
-	mem.sys_start = CFG_PCMCIA_MEM_ADDR;
-	mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
+	mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR;
+	mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE - 1;
 	mem.card_start = 0;
 	i365_set_mem_map (&socket, &mem);
 
@@ -613,8 +613,8 @@ static void i82365_dump_regions (pci_dev_t dev)
 {
 	u_int tmp[2];
 	u_int *mem = (void *) socket.cb_phys;
-	u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
-	u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
+	u_char *cis = (void *) CONFIG_SYS_PCMCIA_MEM_ADDR;
+	u_char *ide = (void *) (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_REG_OFFSET);
 
 	pci_read_config_dword (dev, 0x00, tmp + 0);
 	pci_read_config_dword (dev, 0x80, tmp + 1);