Move AT91RM9200DK board support under board/atmel

We already have a vendor subdir for Atmel, so we should use it.

Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>

1 files changed, 0 insertions, 142 deletions

diff --git a/board/at91rm9200dk/at91rm9200dk.c b/board/at91rm9200dk/at91rm9200dk.c
deleted file mode 100644
index c564f73..0000000
--- a/board/at91rm9200dk/at91rm9200dk.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* Enable Ctrlc */
-	console_init_f ();
-
-	/* Correct IRDA resistor problem */
-	/* Set PA23_TXD in Output */
-	((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
-
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	/* arch number of AT91RM9200DK-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- *	at91rm9200_GetPhyInterface
- * Description:
- *	Initialise the interface functions to the PHY
- * Arguments:
- *	None
- * Return value:
- *	None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
-	p_phyops->Init = dm9161_InitPhy;
-	p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
-	p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
-	p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-
-#endif
-#endif	/* CONFIG_DRIVER_ETHER */
-
-/*
- * Disk On Chip (NAND) Millenium initialization.
- * The NAND lives in the CS2* space
- */
-#if defined(CONFIG_CMD_NAND)
-extern ulong nand_probe (ulong physadr);
-
-#define AT91_SMARTMEDIA_BASE 0x40000000	/* physical address to access memory on NCS3 */
-void nand_init (void)
-{
-	/* Setup Smart Media, fitst enable the address range of CS3 */
-	*AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
-	/* set the bus interface characteristics based on
-	   tDS Data Set up Time 30 - ns
-	   tDH Data Hold Time 20 - ns
-	   tALS ALE Set up Time 20 - ns
-	   16ns at 60 MHz ~= 3  */
-/*memory mapping structures */
-#define SM_ID_RWH	(5 << 28)
-#define SM_RWH		(1 << 28)
-#define SM_RWS		(0 << 24)
-#define SM_TDF		(1 << 8)
-#define SM_NWS		(3)
-	AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
-		AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
-		SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
-
-	/* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
-	*AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
-		AT91C_PC3_BFBAA_SMWE;
-	*AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
-		AT91C_PC3_BFBAA_SMWE;
-
-	/* Configure PC2 as input (signal READY of the SmartMedia) */
-	*AT91C_PIOC_PER = AT91C_PC2_BFAVD;	/* enable direct output enable */
-	*AT91C_PIOC_ODR = AT91C_PC2_BFAVD;	/* disable output */
-
-	/* Configure PB1 as input (signal Card Detect of the SmartMedia) */
-	*AT91C_PIOB_PER = AT91C_PIO_PB1;	/* enable direct output enable */
-	*AT91C_PIOB_ODR = AT91C_PIO_PB1;	/* disable output */
-
-	/* PIOB and PIOC clock enabling */
-	*AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
-	*AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
-
-	if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
-		printf ("  No SmartMedia card inserted\n");
-#ifdef DEBUG
-	printf ("  SmartMedia card inserted\n");
-
-	printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE);
-#endif
-	printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);
-}
-#endif