Correction patch

6 files changed, 222 insertions, 357 deletions

diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c
index e2c6277..064d143 100644
--- a/board/apollon/apollon.c
+++ b/board/apollon/apollon.c
@@ -31,18 +31,32 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/sys_info.h>
 #include <asm/arch/mem.h>
-#include <i2c.h>
 #include <asm/mach-types.h>
 
 void wait_for_command_complete(unsigned int wd_base);
 
+DECLARE_GLOBAL_DATA_PTR;
+
+#define write_config_reg(reg, value)					\
+do {									\
+	writeb(value, reg);						\
+} while (0)
+
+#define mask_config_reg(reg, mask)					\
+do {									\
+	char value = readb(reg) & ~(mask);				\
+	writeb(value, reg);						\
+} while (0)
+
 /*******************************************************
  * Routine: delay
  * Description: spinning delay to use before udelay works
-******************************************************/
-static inline void delay(unsigned long loops) {
-	__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
-			  "bne 1b":"=r" (loops):"0"(loops)); }
+ ******************************************************/
+static inline void delay(unsigned long loops)
+{
+	__asm__("1:\n" "subs %0, %1, #1\n"
+		  "bne 1b":"=r" (loops):"0"(loops));
+}
 
 /*****************************************
  * Routine: board_init
@@ -50,8 +64,6 @@ static inline void delay(unsigned long loops) {
  *****************************************/
 int board_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gpmc_init();		/* in SRAM or SDRM, finish GPMC */
 
 	gd->bd->bi_arch_number = 919;
@@ -68,7 +80,6 @@ int board_init(void)
  **********************************************************/
 void s_init(void)
 {
-
 	watchdog_init();
 	set_muxconf_regs();
 	delay(100);
@@ -80,7 +91,7 @@ void s_init(void)
 /*******************************************************
  * Routine: misc_init_r
  * Description: Init ethernet (done here so udelay works)
-********************************************************/
+ ********************************************************/
 int misc_init_r(void)
 {
 	ether_init();		/* better done here so timers are init'ed */
@@ -102,22 +113,24 @@ void watchdog_init(void)
 	__raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
 
 #define MPU_WD_CLOCKED 1
-#if MPU_WD_CLOCKED		/* value 0x10 stick on aptix, BIT4 polarity seems oppsite */
+#if MPU_WD_CLOCKED
+	/* value 0x10 stick on aptix, BIT4 polarity seems oppsite */
 	__raw_writel(WD_UNLOCK1, WD3_BASE + WSPR);
 	wait_for_command_complete(WD3_BASE);
 	__raw_writel(WD_UNLOCK2, WD3_BASE + WSPR);
 
 	__raw_writel(WD_UNLOCK1, WD4_BASE + WSPR);
 	wait_for_command_complete(WD4_BASE);
-	__raw_writel(WD_UNLOCK2, WD4_BASE + WSPR); 
-#endif 
+	__raw_writel(WD_UNLOCK2, WD4_BASE + WSPR);
+#endif
 }
 
 /******************************************************
  * Routine: wait_for_command_complete
  * Description: Wait for posting to finish on watchdog
-******************************************************/
-void wait_for_command_complete(unsigned int wd_base) {
+ ******************************************************/
+void wait_for_command_complete(unsigned int wd_base)
+{
 	int pending = 1;
 	do {
 		pending = __raw_readl(wd_base + WWPS);
@@ -160,7 +173,7 @@ void ether_init(void)
 	} while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
 	udelay(1000);
 
-	*((volatile unsigned char *)ETH_CONTROL_REG) &= ~0x01;
+	mask_config_reg(ETH_CONTROL_REG, 0x01);
 	udelay(1000);
 
 eth_reset_err_out:
@@ -171,10 +184,9 @@ eth_reset_err_out:
 /**********************************************
  * Routine: dram_init
  * Description: sets uboots idea of sdram size
-**********************************************/
+ **********************************************/
 int dram_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int size0 = 0, size1 = 0;
 	u32 mtype, btype, rev = 0, cpu = 0;
 #define NOT_EARLY 0
@@ -187,8 +199,8 @@ int dram_init(void)
 	display_board_info(btype);
 
 	if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
-		printf("ddr combo\n");
-		do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);	/* init other chip select */
+		/* init other chip select */
+		do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);
 	}
 
 	size0 = get_sdr_cs_size(SDRC_CS0_OSET);
@@ -224,7 +236,7 @@ void set_muxconf_regs(void)
 /*****************************************************************
  * Routine: peripheral_enable
  * Description: Enable the clks & power for perifs (GPT2, UART1,...)
-******************************************************************/
+ ******************************************************************/
 void peripheral_enable(void)
 {
 	unsigned int v, if_clks = 0, func_clks = 0;
@@ -232,7 +244,8 @@ void peripheral_enable(void)
 	/* Enable GP2 timer. */
 	if_clks |= BIT4 | BIT3;
 	func_clks |= BIT4 | BIT3;
-	v = __raw_readl(CM_CLKSEL2_CORE) | 0x4 | 0x2;	/* Sys_clk input OMAP2420_GPT2 */
+	/* Sys_clk input OMAP2420_GPT2 */
+	v = __raw_readl(CM_CLKSEL2_CORE) | 0x4 | 0x2;
 	__raw_writel(v, CM_CLKSEL2_CORE);
 	__raw_writel(0x1, CM_CLKSEL_WKUP);
 
@@ -241,9 +254,11 @@ void peripheral_enable(void)
 	func_clks |= BIT21;
 	if_clks |= BIT21;
 #endif
-	v = __raw_readl(CM_ICLKEN1_CORE) | if_clks;	/* Interface clocks on */
+	/* Interface clocks on */
+	v = __raw_readl(CM_ICLKEN1_CORE) | if_clks;
 	__raw_writel(v, CM_ICLKEN1_CORE);
-	v = __raw_readl(CM_FCLKEN1_CORE) | func_clks;	/* Functional Clocks on */
+	/* Functional Clocks on */
+	v = __raw_readl(CM_FCLKEN1_CORE) | func_clks;
 	__raw_writel(v, CM_FCLKEN1_CORE);
 	delay(1000);
 
@@ -261,199 +276,110 @@ void peripheral_enable(void)
 }
 
 /****************************************
- * Routine: muxSetupUsb0 (ostboot)
+ * Routine: muxSetupUsb0   (ostboot)
  * Description: Setup usb muxing
  *****************************************/
 void muxSetupUsb0(void)
 {
-	volatile uint8 *MuxConfigReg;
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_PUEN;
-	*MuxConfigReg &= (uint8) (~0x1F);
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VP;
-	*MuxConfigReg &= (uint8) (~0x1F);
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VM;
-	*MuxConfigReg &= (uint8) (~0x1F);
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_RCV;
-	*MuxConfigReg &= (uint8) (~0x1F);
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_TXEN;
-	*MuxConfigReg &= (uint8) (~0x1F);
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_SE0;
-	*MuxConfigReg &= (uint8) (~0x1F);
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_DAT;
-	*MuxConfigReg &= (uint8) (~0x1F);
+	mask_config_reg(CONTROL_PADCONF_USB0_PUEN, 0x1f);
+	mask_config_reg(CONTROL_PADCONF_USB0_VP, 0x1f);
+	mask_config_reg(CONTROL_PADCONF_USB0_VM, 0x1f);
+	mask_config_reg(CONTROL_PADCONF_USB0_RCV, 0x1f);
+	mask_config_reg(CONTROL_PADCONF_USB0_TXEN, 0x1f);
+	mask_config_reg(CONTROL_PADCONF_USB0_SE0, 0x1f);
+	mask_config_reg(CONTROL_PADCONF_USB0_DAT, 0x1f);
 }
 
-#define CONTROL_PADCONF_USB1_RCV	((volatile uint8 *)0x480000EB)
-#define CONTROL_PADCONF_USB1_TXEN	((volatile uint8 *)0x480000EC)
-#define CONTROL_PADCONF_GPIO69		((volatile uint8 *)0x480000ED)
-#define CONTROL_PADCONF_GPIO70		((volatile uint8 *)0x480000EE)
-
-#define CONTROL_PADCONF_GPIO102		((volatile uint8 *)0x48000116)
-#define CONTROL_PADCONF_GPIO103		((volatile uint8 *)0x48000117)
-#define CONTROL_PADCONF_GPIO104		((volatile uint8 *)0x48000118)
-#define CONTROL_PADCONF_GPIO105		((volatile uint8 *)0x48000119)
 /****************************************
- * Routine: muxSetupUSBHost (ostboot)
+ * Routine: muxSetupUSBHost   (ostboot)
  * Description: Setup USB Host muxing
  *****************************************/
 void muxSetupUsbHost(void)
 {
-	volatile uint8 *MuxConfigReg;
-
 	/* V19 */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB1_RCV;
-	*MuxConfigReg = 1;
+	write_config_reg(CONTROL_PADCONF_USB1_RCV, 1);
 	/* W20 */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB1_TXEN;
-	*MuxConfigReg = 1;
+	write_config_reg(CONTROL_PADCONF_USB1_TXEN, 1);
 	/* N14 */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO69;
-	*MuxConfigReg = 3;
+	write_config_reg(CONTROL_PADCONF_GPIO69, 3);
 	/* P15 */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO70;
-	*MuxConfigReg = 3;
-
+	write_config_reg(CONTROL_PADCONF_GPIO70, 3);
 	/* L18 */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO102;
-	*MuxConfigReg = 3;
+	write_config_reg(CONTROL_PADCONF_GPIO102, 3);
 	/* L19 */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO103;
-	*MuxConfigReg = 3;
+	write_config_reg(CONTROL_PADCONF_GPIO103, 3);
 	/* K15 */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO104;
-	*MuxConfigReg = 3;
+	write_config_reg(CONTROL_PADCONF_GPIO104, 3);
 	/* K14 */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO105;
-	*MuxConfigReg = 3;
+	write_config_reg(CONTROL_PADCONF_GPIO105, 3);
 }
 
 /****************************************
- * Routine: muxSetupUART1 (ostboot)
+ * Routine: muxSetupUART1  (ostboot)
  * Description: Set up uart1 muxing
  *****************************************/
 void muxSetupUART1(void)
 {
-	volatile unsigned char *MuxConfigReg;
-
-	/* UART1_CTS pin configuration, PIN = D21 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* UART1_RTS pin configuration, PIN = H21 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* UART1_TX pin configuration, PIN = L20 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* UART1_RX pin configuration, PIN = T21 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
+	/* UART1_CTS pin configuration, PIN = D21, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_UART1_CTS, 0);
+	/* UART1_RTS pin configuration, PIN = H21, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_UART1_RTS, 0);
+	/* UART1_TX pin configuration, PIN = L20, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_UART1_TX, 0);
+	/* UART1_RX pin configuration, PIN = T21, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_UART1_RX, 0);
 }
 
 /****************************************
- * Routine: muxSetupLCD (ostboot)
+ * Routine: muxSetupLCD   (ostboot)
  * Description: Setup lcd muxing
  *****************************************/
 void muxSetupLCD(void)
 {
-	volatile unsigned char *MuxConfigReg;
-
-	/* LCD_D0 pin configuration, PIN = Y7 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D1 pin configuration, PIN = P10 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D2 pin configuration, PIN = V8 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D3 pin configuration, PIN = Y8 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D4 pin configuration, PIN = W8 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D5 pin configuration, PIN = R10 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D6 pin configuration, PIN = Y9 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D7 pin configuration, PIN = V9 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D8 pin configuration, PIN = W9 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D9 pin configuration, PIN = P11 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D10 pin configuration, PIN = V10 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D11 pin configuration, PIN = Y10 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D12 pin configuration, PIN = W10 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D13 pin configuration, PIN = R11 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D14 pin configuration, PIN = V11 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D15 pin configuration, PIN = W11 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D16 pin configuration, PIN = P12 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D17 pin configuration, PIN = R12 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_PCLK pin configuration, PIN = W6 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_VSYNC pin configuration, PIN = V7 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_HSYNC pin configuration, PIN = Y6 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* LCD_ACBIAS pin configuration, PIN = W7 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
+	/* LCD_D0 pin configuration, PIN = Y7, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D0, 0);
+	/* LCD_D1 pin configuration, PIN = P10 , Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D1, 0);
+	/* LCD_D2 pin configuration, PIN = V8, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D2, 0);
+	/* LCD_D3 pin configuration, PIN = Y8, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D3, 0);
+	/* LCD_D4 pin configuration, PIN = W8, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D4, 0);
+	/* LCD_D5 pin configuration, PIN = R10, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D5, 0);
+	/* LCD_D6 pin configuration, PIN = Y9, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D6, 0);
+	/* LCD_D7 pin configuration, PIN = V9, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D7, 0);
+	/* LCD_D8 pin configuration, PIN = W9, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D8, 0);
+	/* LCD_D9 pin configuration, PIN = P11, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D9, 0);
+	/* LCD_D10 pin configuration, PIN = V10, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D10, 0);
+	/* LCD_D11 pin configuration, PIN = Y10, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D11, 0);
+	/* LCD_D12 pin configuration, PIN = W10, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D12, 0);
+	/* LCD_D13 pin configuration, PIN = R11, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D13, 0);
+	/* LCD_D14 pin configuration, PIN = V11, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D14, 0);
+	/* LCD_D15 pin configuration, PIN = W11, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D15, 0);
+	/* LCD_D16 pin configuration, PIN = P12, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D16, 0);
+	/* LCD_D17 pin configuration, PIN = R12, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_D17, 0);
+	/* LCD_PCLK pin configuration, PIN = W6, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_PCLK, 0);
+	/* LCD_VSYNC pin configuration, PIN = V7, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_VSYNC, 0);
+	/* LCD_HSYNC pin configuration, PIN = Y6, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_HSYNC, 0);
+	/* LCD_ACBIAS pin configuration, PIN = W7, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_DSS_ACBIAS, 0);
 }
 
 /****************************************
@@ -462,146 +388,84 @@ void muxSetupLCD(void)
  *****************************************/
 void muxSetupMMCSD(void)
 {
-	volatile unsigned char *MuxConfigReg;
-
-	/* SDMMC_CLKI pin configuration, PIN = H15 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* SDMMC_CLKO pin configuration, PIN = G19 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* SDMMC_CMD pin configuration, PIN = H18 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-	/* External pull-ups are present. */
-	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-	/* SDMMC_DAT0 pin configuration, PIN = F20 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-	/* External pull-ups are present. */
-	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-	/* SDMMC_DAT1 pin configuration, PIN = H14 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-	/* External pull-ups are present. */
-	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-	/* SDMMC_DAT2 pin configuration, PIN = E19 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-	/* External pull-ups are present. */
-	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-	/* SDMMC_DAT3 pin configuration, PIN = D19 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-	/* External pull-ups are present. */
-	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-	/* SDMMC_DDIR0 pin configuration, PIN = F19 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* SDMMC_DDIR1 pin configuration, PIN = E20 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* SDMMC_DDIR2 pin configuration, PIN = F18 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* SDMMC_DDIR3 pin configuration, PIN = E18 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* SDMMC_CDIR pin configuration, PIN = G18 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
+	/* SDMMC_CLKI pin configuration,  PIN = H15, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_CLKI, 0);
+	/* SDMMC_CLKO pin configuration,  PIN = G19, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_CLKO, 0);
+	/* SDMMC_CMD pin configuration,   PIN = H18, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_CMD, 0);
+	/* SDMMC_DAT0 pin configuration,  PIN = F20, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT0, 0);
+	/* SDMMC_DAT1 pin configuration,  PIN = H14, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT1, 0);
+	/* SDMMC_DAT2 pin configuration,  PIN = E19, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT2, 0);
+	/* SDMMC_DAT3 pin configuration,  PIN = D19, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT3, 0);
+	/* SDMMC_DDIR0 pin configuration, PIN = F19, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR0, 0);
+	/* SDMMC_DDIR1 pin configuration, PIN = E20, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR1, 0);
+	/* SDMMC_DDIR2 pin configuration, PIN = F18, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR2, 0);
+	/* SDMMC_DDIR3 pin configuration, PIN = E18, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR3, 0);
+	/* SDMMC_CDIR pin configuration,  PIN = G18, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_MMC_CMD_DIR, 0);
 }
 
 /******************************************
  * Routine: muxSetupTouchScreen (ostboot)
- * Description: Set up touch screen muxing
-*******************************************/
+ * Description:  Set up touch screen muxing
+ *******************************************/
 void muxSetupTouchScreen(void)
 {
-	volatile unsigned char *MuxConfigReg;
-
-	/* SPI1_CLK pin configuration, PIN = U18 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* SPI1_MOSI pin configuration, PIN = V20 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* SPI1_MISO pin configuration, PIN = T18 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
-	/* SPI1_nCS0 pin configuration, PIN = U19 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0;
-	*MuxConfigReg = 0x00;	/* Mode = 0, PUPD=Disabled */
-
+	/* SPI1_CLK pin configuration,  PIN = U18, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_SPI1_CLK, 0);
+	/* SPI1_MOSI pin configuration, PIN = V20, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_SPI1_SIMO, 0);
+	/* SPI1_MISO pin configuration, PIN = T18, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_SPI1_SOMI, 0);
+	/* SPI1_nCS0 pin configuration, PIN = U19, Mode = 0, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_SPI1_NCS0, 0);
 #define CONTROL_PADCONF_GPIO85	CONTROL_PADCONF_SPI1_NCS1
-
-	/* PEN_IRQ pin configuration, PIN = N15 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_GPIO85;
-	*MuxConfigReg = 0x03;	/* Mode = 3, PUPD=Disabled */
+	/* PEN_IRQ pin configuration,   PIN = N15, Mode = 3, PUPD=Disabled */
+	write_config_reg(CONTROL_PADCONF_GPIO85, 3);
 }
 
 /***************************************************************
  * Routine: muxSetupGPMC (ostboot)
  * Description: Configures balls which cam up in protected mode
-***************************************************************/
+ ***************************************************************/
 void muxSetupGPMC(void)
 {
-	volatile uint8 *MuxConfigReg;
-	volatile unsigned int *MCR = (volatile unsigned int *)0x4800008C;
-
-	/* gpmc_io_dir */
-	*MCR = 0x19000000;
+	/* gpmc_io_dir, MCR */
+	writel(0x4800008C, 0x19000000);
 
 	/* NOR FLASH CS0 */
-	/* signal - Gpmc_clk;
-		pin - J4; offset - 0x0088; mode - 0; Byte-3  Pull/up - N/A */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_D2_BYTE3;
-	*MuxConfigReg = 0x00;
-
+	/* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode 0; Byte-3 */
+	write_config_reg(CONTROL_PADCONF_GPMC_D2_BYTE3, 0);
 	/* MPDB(Multi Port Debug Port) CS1 */
-	/* signal - gpmc_ncs1;
-		pin - N8; offset - 0x008C; mode - 0; Byte-1 Pull/up - N/A */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE1;
-	*MuxConfigReg = 0x00;
-
-	/* signal - Gpmc_ncs2;
-		pin - E2; offset - 0x008C; mode - 0; Byte-2 Pull/up - N/A */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2;
-	*MuxConfigReg = 0x00;
-
-	/* signal - Gpmc_ncs3;
-		pin - N2; offset - 0x008C; mode - 0; Byte-3 Pull/up - N/A */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE3;
-	*MuxConfigReg = 0x00;
-
-	MuxConfigReg = (volatile uint8 *)((volatile unsigned char *)0x48000090);
-	*MuxConfigReg = 0x00;
-	MuxConfigReg = (volatile uint8 *)((volatile unsigned char *)0x48000091);
-	*MuxConfigReg = 0x00;
-	MuxConfigReg = (volatile uint8 *)((volatile unsigned char *)0x48000092);
-	*MuxConfigReg = 0x00;
-	MuxConfigReg = (volatile uint8 *)((volatile unsigned char *)0x48000093);
-	*MuxConfigReg = 0x00;
+	/* signal - gpmc_ncs1; pin - N8; offset - 0x008D; mode 0; Byte-1 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE1, 0);
+	/* signal - Gpmc_ncs2; pin - E2; offset - 0x008E; mode 0; Byte-2 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE2, 0);
+	/* signal - Gpmc_ncs3; pin - N2; offset - 0x008F; mode 0; Byte-3 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE3, 0);
+	/* signal - Gpmc_ncs4; pin - ??; offset - 0x0090; mode 0; Byte-4 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE4, 0);
+	/* signal - Gpmc_ncs5; pin - ??; offset - 0x0091; mode 0; Byte-5 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE5, 0);
+	/* signal - Gpmc_ncs6; pin - ??; offset - 0x0092; mode 0; Byte-6 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE6, 0);
+	/* signal - Gpmc_ncs7; pin - ??; offset - 0x0093; mode 0; Byte-7 */
+	write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE7, 0);
 }
 
 /****************************************************************
- * Routine: muxSetupSDRC (ostboot)
+ * Routine: muxSetupSDRC  (ostboot)
  * Description: Configures balls which come up in protected mode
-****************************************************************/
+ ****************************************************************/
 void muxSetupSDRC(void)
 {
 	/* It's set by IPL */
diff --git a/board/apollon/lowlevel_init.S b/board/apollon/lowlevel_init.S
index 7676259..f254428 100644
--- a/board/apollon/lowlevel_init.S
+++ b/board/apollon/lowlevel_init.S
@@ -34,13 +34,13 @@
 #define APOLLON_CS0_BASE        0x00000000
 
 #ifdef PRCM_CONFIG_I
-# define SDRC_ACTIM_CTRLA_0_VAL  0x7BA35907
-# define SDRC_ACTIM_CTRLB_0_VAL  0x00000013
-# define SDRC_RFR_CTRL_0_VAL     0x00044C01
+#define SDRC_ACTIM_CTRLA_0_VAL  0x7BA35907
+#define SDRC_ACTIM_CTRLB_0_VAL  0x00000013
+#define SDRC_RFR_CTRL_0_VAL     0x00044C01
 #elif defined(PRCM_CONFIG_II)
-# define SDRC_ACTIM_CTRLA_0_VAL  0x4A59B485
-# define SDRC_ACTIM_CTRLB_0_VAL  0x0000000C
-# define SDRC_RFR_CTRL_0_VAL     0x00030001
+#define SDRC_ACTIM_CTRLA_0_VAL  0x4A59B485
+#define SDRC_ACTIM_CTRLB_0_VAL  0x0000000C
+#define SDRC_RFR_CTRL_0_VAL     0x00030001
 #endif
 
 #define SDRAM_BASE_ADDRESS	0x80008000
@@ -56,7 +56,7 @@ lowlevel_init:
 	mov	r0, pc, lsr #28
 	cmp	r0, #8
 	beq	prcm_setup
-	
+
 flash_setup:
 	/* In Flash */
 	ldr	r0, =WD2_BASE
@@ -203,7 +203,7 @@ prcm_setup:
 
 	ldr	r1, =0x00000002
 	str	r1, [r0, #0x340]
-	
+
         ldr     r1, =CM_CLKSEL1_CORE
 #ifdef PRCM_CONFIG_I
 	ldr     r2, =0x08300C44
@@ -211,7 +211,7 @@ prcm_setup:
 	ldr     r2, =0x04600C26
 #endif
         str     r2, [r1]
-	
+
         ldr     r0, =OMAP2420_CM_BASE
         ldr     r1, [r0, #0x084]
         and     r1, r1, #0x01
diff --git a/board/apollon/mem.c b/board/apollon/mem.c
index 8154d11..c0edca5 100644
--- a/board/apollon/mem.c
+++ b/board/apollon/mem.c
@@ -39,20 +39,19 @@
  *  is necessary until timers are accessible.
  *
  *  not inline to increase chances its in cache when called
-*************************************************************/
+ *************************************************************/
 void sdelay(unsigned long loops)
 {
-	__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
-			  "bne 1b":"=r" (loops):"0"(loops));
+	__asm__("1:\n" "subs %0, %1, #1\n"
+		  "bne 1b":"=r" (loops):"0"(loops));
 }
 
-/*****************************************************************************
+/********************************************************************
  * prcm_init() - inits clocks for PRCM as defined in clocks.h
- * (config II default). Called from SRAM, or Flash (using temp SRAM stack).
- *****************************************************************************/
-void prcm_init(void)
-{
-}
+ * (config II default).
+ *   -- called from SRAM, or Flash (using temp SRAM stack).
+ ********************************************************************/
+void prcm_init(void) { }
 
 /**************************************************************************
  * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
@@ -69,6 +68,7 @@ void make_cs1_contiguous(void)
 	a_add_high = (size & 3) << 8;	/* set up low field */
 	a_add_low = (size & 0x3C) >> 2;	/* set up high field */
 	__raw_writel((a_add_high | a_add_low), SDRC_CS_CFG);
+
 }
 
 /********************************************************
@@ -81,13 +81,18 @@ u32 mem_ok(void)
 	u32 val1, val2;
 	u32 pattern = 0x12345678;
 
-	__raw_writel(0x0, OMAP2420_SDRC_CS0 + 0x400);	/* clear pos A */
-	__raw_writel(pattern, OMAP2420_SDRC_CS0);	/* pattern to pos B */
-	__raw_writel(0x0, OMAP2420_SDRC_CS0 + 4);	/* remove pattern off the bus */
-	val1 = __raw_readl(OMAP2420_SDRC_CS0 + 0x400);	/* get pos A value */
+	/* clear pos A */
+	__raw_writel(0x0, OMAP2420_SDRC_CS0 + 0x400);
+	/* pattern to pos B */
+	__raw_writel(pattern, OMAP2420_SDRC_CS0);
+	/* remove pattern off the bus */
+	__raw_writel(0x0, OMAP2420_SDRC_CS0 + 4);
+	/* get pos A value */
+	val1 = __raw_readl(OMAP2420_SDRC_CS0 + 0x400);
 	val2 = __raw_readl(OMAP2420_SDRC_CS0);	/* get val2 */
 
-	if ((val1 != 0) || (val2 != pattern))	/* see if pos A value changed */
+	/* see if pos A value changed */
+	if ((val1 != 0) || (val2 != pattern))
 		return (0);
 	else
 		return (1);
@@ -142,9 +147,11 @@ void gpmc_init(void)
 	__raw_writel(0x0, GPMC_IRQENABLE);	/* isr's sources masked */
 	__raw_writel(tval, GPMC_TIMEOUT_CONTROL);	/* timeout disable */
 #ifdef CFG_NAND_BOOT
-	__raw_writel(0x001, GPMC_CONFIG);	/* set nWP, disable limited addr */
+	/* set nWP, disable limited addr */
+	__raw_writel(0x001, GPMC_CONFIG);
 #else
-	__raw_writel(0x111, GPMC_CONFIG);	/* set nWP, disable limited addr */
+	/* set nWP, disable limited addr */
+	__raw_writel(0x111, GPMC_CONFIG);
 #endif
 
 	/* discover bus connection from sysboot */
@@ -164,7 +171,8 @@ void gpmc_init(void)
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_0);
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_0);
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_0);
-	__raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_0); #else
+	__raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_0);
+#else
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth,
 		     GPMC_CONFIG1_0);
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
@@ -172,7 +180,6 @@ void gpmc_init(void)
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_0);
-	/* enable new mapping */
 	__raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);
 #endif
 	sdelay(2000);
diff --git a/board/apollon/mem.h b/board/apollon/mem.h
index aed7e1d..5bc96fa 100644
--- a/board/apollon/mem.h
+++ b/board/apollon/mem.h
@@ -44,15 +44,15 @@
 #define APOLLON_242x_SDRC_DLLAB_CTRL_166MHz	0x00000506
 
 #ifdef PRCM_CONFIG_I
-# define APOLLON_2420_SDRC_ACTIM_CTRLA_0	APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz
-# define APOLLON_2420_SDRC_ACTIM_CTRLB_0	APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz
-# define APOLLON_2420_SDRC_RFR_CTRL		APOLLON_242X_SDRC_RFR_CTRL_166MHz
-# define APOLLON_2420_SDRC_DLLAB_CTRL		APOLLON_242x_SDRC_DLLAB_CTRL_166MHz
+#define APOLLON_2420_SDRC_ACTIM_CTRLA_0	APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz
+#define APOLLON_2420_SDRC_ACTIM_CTRLB_0	APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz
+#define APOLLON_2420_SDRC_RFR_CTRL	APOLLON_242X_SDRC_RFR_CTRL_166MHz
+#define APOLLON_2420_SDRC_DLLAB_CTRL	APOLLON_242x_SDRC_DLLAB_CTRL_166MHz
 #elif PRCM_CONFIG_II
-# define APOLLON_2420_SDRC_ACTIM_CTRLA_0	APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define APOLLON_2420_SDRC_ACTIM_CTRLB_0	APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define APOLLON_2420_SDRC_RFR_CTRL		APOLLON_242X_SDRC_RFR_CTRL_100MHz
-# define APOLLON_2420_SDRC_DLLAB_CTRL		APOLLON_242x_SDRC_DLLAB_CTRL_100MHz
+#define APOLLON_2420_SDRC_ACTIM_CTRLA_0	APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz
+#define APOLLON_2420_SDRC_ACTIM_CTRLB_0	APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz
+#define APOLLON_2420_SDRC_RFR_CTRL	APOLLON_242X_SDRC_RFR_CTRL_100MHz
+#define APOLLON_2420_SDRC_DLLAB_CTRL	APOLLON_242x_SDRC_DLLAB_CTRL_100MHz
 #endif
 
 /* GPMC settings */
diff --git a/board/apollon/sys_info.c b/board/apollon/sys_info.c
index 60c35b4..26ac9a2 100644
--- a/board/apollon/sys_info.c
+++ b/board/apollon/sys_info.c
@@ -39,6 +39,7 @@ static u32 get_prod_id(void)
 	p = __raw_readl(PRODUCTION_ID);	/* get production ID */
 	return ((p & CPU_242X_PID_MASK) >> 16);
 }
+
 /**************************************************************************
  * get_cpu_type() - low level get cpu type
  * - no C globals yet.
@@ -68,7 +69,8 @@ u32 get_cpu_type(void)
 
 	v = __raw_readl(TAP_IDCODE_REG);
 	v &= CPU_24XX_ID_MASK;
-	if (v == CPU_2420_CHIPID) {	/* currently 2420 and 2422 have same id */
+	/* currently 2420 and 2422 have same id */
+	if (v == CPU_2420_CHIPID) {
 		if (is_gpmc_muxed() == GPMC_MUXED)	/* if mux'ed */
 			return (CPU_2420);
 		else
@@ -127,8 +129,7 @@ u32 get_mem_type(void)
 		return (DDR_DISCRETE);	/* origional SDP */
 }
 
-/**********************************************************************
- *
+/***********************************************************************
  * get_cs0_size() - get size of chip select 0/1
  ************************************************************************/
 u32 get_sdr_cs_size(u32 offset)
@@ -140,8 +141,7 @@ u32 get_sdr_cs_size(u32 offset)
 	return (size);
 }
 
-/**********************************************************************
- *
+/***********************************************************************
  * get_board_type() - get board type based on current production stats.
  *  --- NOTE: 2 I2C EEPROMs will someday be populated with proper info.
  *      when they are available we can get info from there.  This should
@@ -149,17 +149,12 @@ u32 get_sdr_cs_size(u32 offset)
  ************************************************************************/
 u32 get_board_type(void)
 {
-#if 0
-	if (i2c_probe(I2C_MENELAUS) == 0)
-		return (BOARD_H4_MENELAUS);
-	else
-#endif
-		return (BOARD_H4_SDP);
+	return (BOARD_H4_SDP);
 }
 
 /******************************************************************
  * get_sysboot_value() - get init word settings (dip switch on h4)
-******************************************************************/
+ ******************************************************************/
 inline u32 get_sysboot_value(void)
 {
 	return (0x00000FFF & __raw_readl(CONTROL_STATUS));
@@ -175,7 +170,7 @@ inline u32 get_sysboot_value(void)
  *       -- 4 to flash
  *       -- 8 to enent
  *       -- c to wifi
- ***************************************************************************/
+ ****************************************************************************/
 u32 get_gpmc0_base(void)
 {
 	u32 b;
@@ -231,8 +226,8 @@ u32 get_gpmc0_width(void)
  * wait_on_value() - common routine to allow waiting for changes in
  *   volatile regs.
  *********************************************************************/
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr,
-u32 bound) {
+u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
+{
 	u32 i = 0, val;
 	do {
 		++i;
@@ -304,7 +299,8 @@ void display_board_info(u32 btype)
 	}
 
 	printf("OMAP%s-%s revision %d\n", cpu_s, sec_s, rev - 1);
-	printf("Samsung Apollon SDP Base Board + %s \n", mem_s); }
+	printf("Samsung Apollon SDP Base Board + %s \n", mem_s);
+}
 
 /*************************************************************************
  * get_board_rev() - setup to pass kernel board revision information
@@ -316,9 +312,8 @@ u32 get_board_rev(void)
 	u32 rev = 0;
 	u32 btype = get_board_type();
 
-	if (btype == BOARD_H4_MENELAUS) {
+	if (btype == BOARD_H4_MENELAUS)
 		rev = 1;
-	}
 	return (rev);
 }
 
diff --git a/board/apollon/u-boot.lds b/board/apollon/u-boot.lds
index 686d86b..c67cd3c 100644
--- a/board/apollon/u-boot.lds
+++ b/board/apollon/u-boot.lds
@@ -36,7 +36,7 @@ SECTIONS
 	. = 0x00000000;
 
 	. = ALIGN(4);
-	.text	 :
+	.text	:
 	{
 		cpu/arm1136/start.o	(.text)
 		*(.text)
@@ -61,4 +61,3 @@ SECTIONS
 	.bss : { *(.bss) }
 	_end = .;
 }
-