sh: Renesas Solutions AP325RXA board support

AP325RXA is SH7723's reference board.
This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
In this patch, support SCIF, NOR Flash, and Ethernet.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

6 files changed, 794 insertions, 0 deletions

diff --git a/board/ap325rxa/Makefile b/board/ap325rxa/Makefile
new file mode 100644
index 0000000..21f3e6e
--- /dev/null
+++ b/board/ap325rxa/Makefile
@@ -0,0 +1,51 @@
+#########################################################################
+#
+# Copyright (C) 2008 Renesas Solutions Corp.
+# Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+#
+# board/ap325rxa/Makefile
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= ap325rxa.o cpld-ap325rxa.o
+SOBJS	:= lowlevel_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ap325rxa/ap325rxa.c b/board/ap325rxa/ap325rxa.c
new file mode 100644
index 0000000..cfa0261
--- /dev/null
+++ b/board/ap325rxa/ap325rxa.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+/* PRI control register */
+#define PRPRICR5	0xFF800048 /* LMB */
+#define PRPRICR5_D	0x2a
+
+/* FPGA control */
+#define FPGA_NAND_CTL	0xB410020C
+#define FPGA_NAND_RST	0x0008
+#define FPGA_NAND_INIT	0x0000
+#define FPGA_NAND_RST_WAIT	10000
+
+/* I/O port data */
+#define PACR_D	0x0000
+#define PBCR_D	0x0000
+#define PCCR_D	0x1000
+#define PDCR_D	0x0000
+#define PECR_D	0x0410
+#define PFCR_D	0xffff
+#define PGCR_D	0x0000
+#define PHCR_D	0x5011
+#define PJCR_D	0x4400
+#define PKCR_D	0x7c00
+#define PLCR_D	0x0000
+#define PMCR_D	0x0000
+#define PNCR_D	0x0000
+#define PQCR_D	0x0000
+#define PRCR_D	0x0000
+#define PSCR_D	0x0000
+#define PTCR_D	0x0010
+#define PUCR_D	0x0fff
+#define PVCR_D	0xffff
+#define PWCR_D	0x0000
+#define PXCR_D	0x7500
+#define PYCR_D	0x0000
+#define PZCR_D	0x5540
+
+/* Pin Function Controler data */
+#define PSELA_D	0x1410
+#define PSELB_D	0x0140
+#define PSELC_D	0x0000
+#define PSELD_D	0x0400
+
+/* I/O Buffer Hi-Z data */
+#define	HIZCRA_D	0x0000
+#define HIZCRB_D	0x1000
+#define HIZCRC_D	0x0000
+#define HIZCRD_D	0x0000
+
+/* Module select reg data */
+#define MSELCRA_D	0x0014
+#define MSELCRB_D	0x0018
+
+/* Module Stop reg Data */
+#define MSTPCR2_D	0xFFD9F280
+
+/* CPLD loader */
+extern void init_cpld(void);
+
+int checkboard(void)
+{
+	puts("BOARD: AP325RXA\n");
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Pin Function Controler Init */
+	outw(PSELA_D, PSELA);
+	outw(PSELB_D, PSELB);
+	outw(PSELC_D, PSELC);
+	outw(PSELD_D, PSELD);
+
+	/* I/O Buffer Hi-Z Init */
+	outw(HIZCRA_D, HIZCRA);
+	outw(HIZCRB_D, HIZCRB);
+	outw(HIZCRC_D, HIZCRC);
+	outw(HIZCRD_D, HIZCRD);
+
+	/* Module select reg Init */
+	outw(MSELCRA_D, MSELCRA);
+	outw(MSELCRB_D, MSELCRB);
+
+	/* Module Stop reg Init */
+	outl(MSTPCR2_D, MSTPCR2);
+
+	/* I/O ports */
+	outw(PACR_D, PACR);
+	outw(PBCR_D, PBCR);
+	outw(PCCR_D, PCCR);
+	outw(PDCR_D, PDCR);
+	outw(PECR_D, PECR);
+	outw(PFCR_D, PFCR);
+	outw(PGCR_D, PGCR);
+	outw(PHCR_D, PHCR);
+	outw(PJCR_D, PJCR);
+	outw(PKCR_D, PKCR);
+	outw(PLCR_D, PLCR);
+	outw(PMCR_D, PMCR);
+	outw(PNCR_D, PNCR);
+	outw(PQCR_D, PQCR);
+	outw(PRCR_D, PRCR);
+	outw(PSCR_D, PSCR);
+	outw(PTCR_D, PTCR);
+	outw(PUCR_D, PUCR);
+	outw(PVCR_D, PVCR);
+	outw(PWCR_D, PWCR);
+	outw(PXCR_D, PXCR);
+	outw(PYCR_D, PYCR);
+	outw(PZCR_D, PZCR);
+
+	/* PRI control register Init */
+	outl(PRPRICR5_D, PRPRICR5);
+
+	/* cpld init */
+	init_cpld();
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_memstart = CFG_SDRAM_BASE;
+	gd->bd->bi_memsize = CFG_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+	return 0;
+}
+
+void led_set_state(unsigned short value)
+{
+}
+
+void ide_set_reset(int idereset)
+{
+	outw(FPGA_NAND_RST, FPGA_NAND_CTL);	/* NAND RESET */
+	udelay(FPGA_NAND_RST_WAIT);
+	outw(FPGA_NAND_INIT, FPGA_NAND_CTL);
+}
diff --git a/board/ap325rxa/config.mk b/board/ap325rxa/config.mk
new file mode 100644
index 0000000..b52a5e5
--- /dev/null
+++ b/board/ap325rxa/config.mk
@@ -0,0 +1,26 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+#
+# TEXT_BASE refers to image _after_ relocation.
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+
+TEXT_BASE = 0x8FFC0000
diff --git a/board/ap325rxa/cpld-ap325rxa.c b/board/ap325rxa/cpld-ap325rxa.c
new file mode 100644
index 0000000..16fadcb
--- /dev/null
+++ b/board/ap325rxa/cpld-ap325rxa.c
@@ -0,0 +1,206 @@
+/***************************************************************
+ * Project:
+ *	  CPLD SlaveSerial Configuration via embedded microprocessor.
+ *
+ * Copyright info:
+ *
+ *	  This is free software; you can redistribute it and/or modify
+ *	  it as you like.
+ *
+ *	  This program is distributed in the hope that it will be useful,
+ *	  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Description:
+ *
+ *      This is the main source file that will allow a microprocessor
+ *      to configure Xilinx Virtex, Virtex-E, Virtex-EM, Virtex-II,
+ *      and Spartan-II devices via the SlaveSerial Configuration Mode.
+ *      This code is discussed in Xilinx Application Note, XAPP502.
+ *
+ * History:
+ *	  3-October-2001  MN/MP  - Created
+ *	  20-August-2008  Renesas Solutions - Modified to SH7723
+ ****************************************************************/
+
+#include <common.h>
+
+/* Serial */
+#define SCIF_BASE 0xffe00000 /* SCIF0 */
+#define SCSMR	(vu_short *)(SCIF_BASE + 0x00)
+#define SCBRR	(vu_char *)(SCIF_BASE + 0x04)
+#define SCSCR	(vu_short *)(SCIF_BASE + 0x08)
+#define SC_TDR	(vu_char *)(SCIF_BASE + 0x0C)
+#define SC_SR	(vu_short *)(SCIF_BASE + 0x10)
+#define SCFCR	(vu_short *)(SCIF_BASE + 0x18)
+#define	RFCR	(vu_long *)0xFE400020
+
+#define SCSCR_INIT		0x0038
+#define SCSCR_CLR		0x0000
+#define SCFCR_INIT		0x0006
+#define SCSMR_INIT		0x0080
+#define RFCR_CLR		0xA400
+#define SCI_TD_E		0x0020
+#define SCI_TDRE_CLEAR	0x00df
+
+#define BPS_SETTING_VALUE	1 /* 12.5MHz */
+#define WAIT_RFCR_COUNTER	500
+
+/* CPLD data size */
+#define CPLD_DATA_SIZE	169216
+
+/* out */
+#define CPLD_PFC_ADR	((vu_short *)0xA4050112)
+
+#define CPLD_PROG_ADR	((vu_char *)0xA4050132)
+#define CPLD_PROG_DAT	0x80
+
+/* in */
+#define CPLD_INIT_ADR	((vu_char *)0xA4050132)
+#define CPLD_INIT_DAT	0x40
+#define CPLD_DONE_ADR	((vu_char *)0xA4050132)
+#define CPLD_DONE_DAT	0x20
+
+#define	HIZCRB			((vu_short *)0xA405015A)
+
+/* data */
+#define CPLD_NOMAL_START	0xA0A80000
+#define CPLD_SAFE_START		0xA0AC0000
+#define MODE_SW				(vu_char *)0xA405012A
+
+static void init_cpld_loader(void)
+{
+
+	*SCSCR = SCSCR_CLR;
+	*SCFCR = SCFCR_INIT;
+	*SCSMR = SCSMR_INIT;
+
+	*SCBRR = BPS_SETTING_VALUE;
+
+	*RFCR = RFCR_CLR; /* Refresh counter clear */
+
+	while (*RFCR < WAIT_RFCR_COUNTER)
+		;
+
+	*SCFCR = 0x0; /* RTRG=00, TTRG=00 */
+				  /* MCE=0,TFRST=0,RFRST=0,LOOP=0 */
+	*SCSCR = SCSCR_INIT;
+}
+
+static int check_write_ready(void)
+{
+	u16 status = *SC_SR;
+	return status & SCI_TD_E;
+}
+
+static void write_cpld_data(char ch)
+{
+	while (!check_write_ready())
+		;
+
+	*SC_TDR = ch;
+	*SC_SR;
+	*SC_SR = SCI_TDRE_CLEAR;
+}
+
+static int delay(void)
+{
+	int i;
+	int c = 0;
+	for (i = 0; i < 200; i++) {
+		c = *(volatile int *)0xa0000000;
+	}
+	return c;
+}
+
+/***********************************************************************
+ *
+ * Function:     slave_serial
+ *
+ * Description:  Initiates SlaveSerial Configuration.
+ *               Calls ShiftDataOut() to output serial data
+ *
+ ***********************************************************************/
+static void slave_serial(void)
+{
+	int i;
+	unsigned char *flash;
+
+	*CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */
+	delay();
+
+	/*
+	 * Toggle Program Pin by Toggling Program_OE bit
+	 * This is accomplished by writing to the Program Register in the CPLD
+	 *
+	 * NOTE: The Program_OE bit should be driven high to bring the Virtex
+	 *      Program Pin low. Likewise, it should be driven low
+	 *      to bring the Virtex Program Pin to High-Z
+	 */
+
+	*CPLD_PROG_ADR &= ~CPLD_PROG_DAT; /* PROGRAM_OE LOW */
+	delay();
+
+	/*
+	 * Bring Program High-Z
+	 * (Drive Program_OE bit low to bring Virtex Program Pin to High-Z
+	 */
+
+	/* Program_OE bit Low brings the Virtex Program Pin to High Z: */
+	*CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */
+
+	while ((*CPLD_INIT_ADR & CPLD_INIT_DAT) == 0)
+		delay();
+
+	/* Begin Slave-Serial Configuration */
+	flash = (unsigned char *)CPLD_NOMAL_START;
+
+	for (i = 0; i < CPLD_DATA_SIZE; i++)
+		write_cpld_data(*flash++);
+}
+
+/***********************************************************************
+ *
+ * Function: check_done_bit
+ *
+ * Description: This function takes monitors the CPLD Input Register
+ * 		   by checking the status of the DONE bit in that Register.
+ *               By doing so, it monitors the Xilinx Virtex device's DONE
+ *               Pin to see if configuration bitstream has been properly
+ *               loaded
+ *
+ ***********************************************************************/
+static void check_done_bit(void)
+{
+	while (!(*CPLD_DONE_ADR & CPLD_DONE_DAT))
+		;
+}
+
+/***********************************************************************
+ *
+ * Function: init_cpld
+ *
+ * Description: Begins Slave Serial configuration of Xilinx FPGA
+ *
+ ***********************************************************************/
+void init_cpld(void)
+{
+	/* Init serial device */
+	init_cpld_loader();
+
+	if (*CPLD_DONE_ADR & CPLD_DONE_DAT)	/* Already DONE */
+		return;
+
+	*HIZCRB = 0x0000;
+	*CPLD_PFC_ADR = 0x7c00;			/* FPGA PROG = OUTPUT */
+
+	/* write CPLD data from NOR flash to device */
+	slave_serial();
+
+	/*
+	 * Monitor the DONE bit in the CPLD Input Register to see if
+	 * configuration successful
+	 */
+
+	check_done_bit();
+}
diff --git a/board/ap325rxa/lowlevel_init.S b/board/ap325rxa/lowlevel_init.S
new file mode 100644
index 0000000..4f66588
--- /dev/null
+++ b/board/ap325rxa/lowlevel_init.S
@@ -0,0 +1,243 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * board/ap325rxa/lowlevel_init.S
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+
+/*
+ * Board specific low level init code, called _very_ early in the
+ * startup sequence. Relocation to SDRAM has not happened yet, no
+ * stack is available, bss section has not been initialised, etc.
+ *
+ * (Note: As no stack is available, no subroutines can be called...).
+ */
+
+	.global	lowlevel_init
+
+	.text
+	.align	2
+
+lowlevel_init:
+	mov.l	DRVCRA_A, r1
+	mov.l 	DRVCRA_D, r0
+	mov.w	r0, @r1
+
+	mov.l	DRVCRB_A, r1
+	mov.l 	DRVCRB_D, r0
+	mov.w	r0, @r1
+
+	mov.l	RWTCSR_A, r1
+	mov.l 	RWTCSR_D1, r0
+	mov.w	r0, @r1
+
+	mov.l	RWTCNT_A, r1
+	mov.l 	RWTCNT_D, r0
+	mov.w	r0, @r1
+
+	mov.l	RWTCSR_A, r1
+	mov.l 	RWTCSR_D2, r0
+	mov.w	r0, @r1
+
+	mov.l	FRQCR_A, r1
+	mov.l 	FRQCR_D, r0
+	mov.l	r0, @r1
+
+	mov.l	CMNCR_A, r1
+	mov.l	CMNCR_D, r0
+	mov.l	r0, @r1
+
+	mov.l	CS0BCR_A ,r1
+	mov.l	CS0BCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS4BCR_A ,r1
+	mov.l	CS4BCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS5ABCR_A ,r1
+	mov.l	CS5ABCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS5BBCR_A ,r1
+	mov.l	CS5BBCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS6ABCR_A ,r1
+	mov.l	CS6ABCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS6BBCR_A ,r1
+	mov.l	CS6BBCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS0WCR_A ,r1
+	mov.l	CS0WCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS4WCR_A ,r1
+	mov.l	CS4WCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS5AWCR_A ,r1
+	mov.l	CS5AWCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS5BWCR_A ,r1
+	mov.l	CS5BWCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS6AWCR_A ,r1
+	mov.l	CS6AWCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	CS6BWCR_A ,r1
+	mov.l	CS6BWCR_D ,r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_SDCR_A, r1
+	mov.l 	SBSC_SDCR_D1, r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_SDWCR_A, r1
+	mov.l 	SBSC_SDWCR_D, r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_SDPCR_A, r1
+	mov.l 	SBSC_SDPCR_D, r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_RTCSR_A, r1
+	mov.l 	SBSC_RTCSR_D, r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_RTCNT_A, r1
+	mov.l 	SBSC_RTCNT_D, r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_RTCOR_A, r1
+	mov.l 	SBSC_RTCOR_D, r0
+	mov.l	r0, @r1
+
+	mov.l	SBSC_SDMR3_A1, r1
+	mov.l 	SBSC_SDMR3_D, r0
+	mov.b	r0, @r1
+
+	mov.l	SBSC_SDMR3_A2, r1
+	mov.l 	SBSC_SDMR3_D, r0
+	mov.b	r0, @r1
+
+	mov.l	SLEEP_CNT, r1
+2:	tst	r1, r1
+	nop
+	bf/s	2b
+	dt	r1
+
+	mov.l	SBSC_SDMR3_A3, r1
+	mov.l 	SBSC_SDMR3_D, r0
+	mov.b	r0, @r1
+
+	mov.l	SBSC_SDCR_A, r1
+	mov.l 	SBSC_SDCR_D2, r0
+	mov.l	r0, @r1
+
+	mov.l	CCR_A, r1
+	mov.l 	CCR_D, r0
+	mov.l	r0, @r1
+
+	! BL bit off (init = ON)  (?!?)
+
+	stc	sr, r0				! BL bit off(init=ON)
+	mov.l	SR_MASK_D, r1
+	and	r1, r0
+	ldc	r0, sr
+
+	rts
+	 mov	#0, r0
+
+	.align	2
+
+DRVCRA_A:	.long	DRVCRA
+DRVCRB_A:	.long	DRVCRB
+DRVCRA_D:	.long	0x4555
+DRVCRB_D:	.long	0x0005
+
+RWTCSR_A:	.long	RWTCSR
+RWTCNT_A:	.long	RWTCNT
+FRQCR_A:	.long	FRQCR
+RWTCSR_D1:	.long	0xa507
+RWTCSR_D2:	.long	0xa504
+RWTCNT_D:	.long	0x5a00
+FRQCR_D:	.long	0x0b04474a
+
+SBSC_SDCR_A:	.long	SBSC_SDCR
+SBSC_SDWCR_A:	.long	SBSC_SDWCR
+SBSC_SDPCR_A:	.long	SBSC_SDPCR
+SBSC_RTCSR_A:	.long	SBSC_RTCSR
+SBSC_RTCNT_A:	.long	SBSC_RTCNT
+SBSC_RTCOR_A:	.long	SBSC_RTCOR
+SBSC_SDMR3_A1:	.long	0xfe510000
+SBSC_SDMR3_A2:	.long	0xfe500242
+SBSC_SDMR3_A3:	.long	0xfe5c0042
+
+SBSC_SDCR_D1:	.long	0x92810112
+SBSC_SDCR_D2:	.long	0x92810912
+SBSC_SDWCR_D:	.long	0x05162482
+SBSC_SDPCR_D:	.long	0x00300087
+SBSC_RTCSR_D:	.long	0xa55a0212
+SBSC_RTCNT_D:	.long	0xa55a0000
+SBSC_RTCOR_D:	.long	0xa55a0040
+SBSC_SDMR3_D:	.long	0x00
+
+CMNCR_A:	.long	CMNCR
+CS0BCR_A:	.long	CS0BCR
+CS4BCR_A:	.long	CS4BCR
+CS5ABCR_A:	.long 	CS5ABCR
+CS5BBCR_A:	.long	CS5BBCR
+CS6ABCR_A:	.long	CS6ABCR
+CS6BBCR_A:	.long	CS6BBCR
+CS0WCR_A:	.long	CS0WCR
+CS4WCR_A:	.long	CS4WCR
+CS5AWCR_A:	.long	CS5AWCR
+CS5BWCR_A:	.long	CS5BWCR
+CS6AWCR_A:	.long	CS6AWCR
+CS6BWCR_A:	.long	CS6BWCR
+
+CMNCR_D:	.long	0x00000013
+CS0BCR_D:	.long	0x24920400
+CS4BCR_D:	.long	0x24920400
+CS5ABCR_D:	.long	0x24920400
+CS5BBCR_D:	.long	0x7fff0600
+CS6ABCR_D:	.long	0x24920400
+CS6BBCR_D:	.long	0x24920600
+CS0WCR_D:	.long	0x00000480
+CS4WCR_D:	.long	0x00000480
+CS5AWCR_D:	.long	0x00000380
+CS5BWCR_D:	.long	0x00000600
+CS6AWCR_D:	.long	0x00000300
+CS6BWCR_D:	.long	0x00000540
+
+CCR_A:		.long	0xff00001c
+CCR_D:		.long	0x0000090d
+
+SLEEP_CNT:	.long	0x00000800
+SR_MASK_D:	.long	0xEFFFFF0F
diff --git a/board/ap325rxa/u-boot.lds b/board/ap325rxa/u-boot.lds
new file mode 100644
index 0000000..a670374
--- /dev/null
+++ b/board/ap325rxa/u-boot.lds
@@ -0,0 +1,106 @@
+/*
+ * Copyrigth (c) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+	/*
+	   Base address of internal SDRAM is 0x88000000.
+	   Although size of SDRAM can be either 16 or 32 MBytes,
+	   we assume 16 MBytes (ie ignore upper half if the full
+	   32 MBytes is present).
+
+	   NOTE: This address must match with the definition of
+	   TEXT_BASE in config.mk (in this directory).
+
+	*/
+	. = 0x88000000 + (128*1024*1024) - (256*1024);
+
+	PROVIDE (reloc_dst = .);
+
+	PROVIDE (_ftext = .);
+	PROVIDE (_fcode = .);
+	PROVIDE (_start = .);
+
+	.text :
+	{
+		cpu/sh4/start.o		(.text)
+		. = ALIGN(8192);
+		common/environment.o	(.ppcenv)
+		. = ALIGN(8192);
+		common/environment.o	(.ppcenvr)
+		. = ALIGN(8192);
+		*(.text)
+		. = ALIGN(4);
+	} =0xFF
+	PROVIDE (_ecode = .);
+	.rodata :
+	{
+		*(.rodata)
+		. = ALIGN(4);
+	}
+	PROVIDE (_etext = .);
+
+
+	PROVIDE (_fdata = .);
+	.data :
+	{
+		*(.data)
+		. = ALIGN(4);
+	}
+	PROVIDE (_edata = .);
+
+	PROVIDE (_fgot = .);
+	.got :
+	{
+		*(.got)
+		. = ALIGN(4);
+	}
+	PROVIDE (_egot = .);
+
+	PROVIDE (__u_boot_cmd_start = .);
+	.u_boot_cmd :
+	{
+		*(.u_boot_cmd)
+		. = ALIGN(4);
+	}
+	PROVIDE (__u_boot_cmd_end = .);
+
+	PROVIDE (reloc_dst_end = .);
+	/* _reloc_dst_end = .; */
+
+	PROVIDE (bss_start = .);
+	PROVIDE (__bss_start = .);
+	.bss :
+	{
+		*(.bss)
+		. = ALIGN(4);
+	}
+	PROVIDE (bss_end = .);
+
+	PROVIDE (_end = .);
+}
+