Add support for NetSilicon NS7520 processor.

Patch by Art Shipkowski, 12 May 2005

Cleanup.

7 files changed, 2086 insertions, 2010 deletions

diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c
index 743211f..dd836ce 100644
--- a/board/amirix/ap1000/ap1000.c
+++ b/board/amirix/ap1000/ap1000.c
@@ -30,218 +30,204 @@
 
 int board_pre_init (void)
 {
-    return 0;
+	return 0;
 }
 
 /** serial number and platform display at startup */
 int checkboard (void)
 {
-    unsigned char *s = getenv ("serial#");
-    unsigned char *e;
-
-    /* After a loadace command, the SystemAce control register is left in a wonky state. */
-    /* this code did not work in board_pre_init */
-    unsigned char* p = (unsigned char*)AP1000_SYSACE_REGBASE;
-    p[SYSACE_CTRLREG0] = 0x0;
-
-    /* add platform and device to banner */
-    switch(get_device()){
-        case AP1xx_AP107_TARGET:{
-            puts(AP1xx_AP107_TARGET_STR);
-            break;
-        }
-        case AP1xx_AP120_TARGET:{
-            puts(AP1xx_AP120_TARGET_STR);
-            break;
-        }
-        case AP1xx_AP130_TARGET:{
-            puts(AP1xx_AP130_TARGET_STR);
-            break;
-        }
-        case AP1xx_AP1070_TARGET:{
-            puts(AP1xx_AP1070_TARGET_STR);
-            break;
-        }
-        case AP1xx_AP1100_TARGET:{
-            puts(AP1xx_AP1100_TARGET_STR);
-            break;
-        }
-        default:{
-            puts(AP1xx_UNKNOWN_STR);
-            break;
-        }
-    }
-    puts(AP1xx_TARGET_STR);
-    puts(" with ");
-
-    switch(get_platform()){
-        case AP100_BASELINE_PLATFORM:
-        case AP1000_BASELINE_PLATFORM:{
-            puts(AP1xx_BASELINE_PLATFORM_STR);
-            break;
-        }
-        case AP1xx_QUADGE_PLATFORM:{
-            puts(AP1xx_QUADGE_PLATFORM_STR);
-            break;
-        }
-        case AP1xx_MGT_REF_PLATFORM:{
-            puts(AP1xx_MGT_REF_PLATFORM_STR);
-            break;
-        }
-        case AP1xx_STANDARD_PLATFORM:{
-            puts(AP1xx_STANDARD_PLATFORM_STR);
-            break;
-        }
-        case AP1xx_DUAL_PLATFORM:{
-            puts(AP1xx_DUAL_PLATFORM_STR);
-            break;
-        }
-        case AP1xx_BASE_SRAM_PLATFORM:{
-            puts(AP1xx_BASE_SRAM_PLATFORM_STR);
-            break;
-        }
-        case AP1xx_PCI_PCB_TESTPLATFORM:
-        case AP1000_PCI_PCB_TESTPLATFORM:{
-            puts(AP1xx_PCI_PCB_TESTPLATFORM_STR);
-            break;
-        }
-        case AP1xx_DUAL_GE_MEZZ_TESTPLATFORM:{
-            puts(AP1xx_DUAL_GE_MEZZ_TESTPLATFORM_STR);
-            break;
-        }
-        case AP1xx_SFP_MEZZ_TESTPLATFORM:{
-            puts(AP1xx_SFP_MEZZ_TESTPLATFORM_STR);
-            break;
-        }
-        default:{
-            puts(AP1xx_UNKNOWN_STR);
-            break;
-        }
-    }
-
-    if((get_platform() & AP1xx_TESTPLATFORM_MASK) != 0){
-        puts(AP1xx_TESTPLATFORM_STR);
-    }
-    else{
-        puts(AP1xx_PLATFORM_STR);
-    }
-
-    putc('\n');
-
-    puts ("Serial#: ");
-
-    if (!s) {
-        printf ("### No HW ID - assuming AMIRIX");
-    } else {
-        for (e = s; *e; ++e) {
-            if (*e == ' ')
-                break;
-        }
-
-        for (; s < e; ++s) {
-            putc (*s);
-        }
-    }
-
-    putc ('\n');
-
-    return (0);
+	unsigned char *s = getenv ("serial#");
+	unsigned char *e;
+
+	/* After a loadace command, the SystemAce control register is left in a wonky state. */
+	/* this code did not work in board_pre_init */
+	unsigned char *p = (unsigned char *) AP1000_SYSACE_REGBASE;
+
+	p[SYSACE_CTRLREG0] = 0x0;
+
+	/* add platform and device to banner */
+	switch (get_device ()) {
+	case AP1xx_AP107_TARGET:
+		puts (AP1xx_AP107_TARGET_STR);
+		break;
+	case AP1xx_AP120_TARGET:
+		puts (AP1xx_AP120_TARGET_STR);
+		break;
+	case AP1xx_AP130_TARGET:
+		puts (AP1xx_AP130_TARGET_STR);
+		break;
+	case AP1xx_AP1070_TARGET:
+		puts (AP1xx_AP1070_TARGET_STR);
+		break;
+	case AP1xx_AP1100_TARGET:
+		puts (AP1xx_AP1100_TARGET_STR);
+		break;
+	default:
+		puts (AP1xx_UNKNOWN_STR);
+		break;
+	}
+	puts (AP1xx_TARGET_STR);
+	puts (" with ");
+
+	switch (get_platform ()) {
+	case AP100_BASELINE_PLATFORM:
+	case AP1000_BASELINE_PLATFORM:
+		puts (AP1xx_BASELINE_PLATFORM_STR);
+		break;
+	case AP1xx_QUADGE_PLATFORM:
+		puts (AP1xx_QUADGE_PLATFORM_STR);
+		break;
+	case AP1xx_MGT_REF_PLATFORM:
+		puts (AP1xx_MGT_REF_PLATFORM_STR);
+		break;
+	case AP1xx_STANDARD_PLATFORM:
+		puts (AP1xx_STANDARD_PLATFORM_STR);
+		break;
+	case AP1xx_DUAL_PLATFORM:
+		puts (AP1xx_DUAL_PLATFORM_STR);
+		break;
+	case AP1xx_BASE_SRAM_PLATFORM:
+		puts (AP1xx_BASE_SRAM_PLATFORM_STR);
+		break;
+	case AP1xx_PCI_PCB_TESTPLATFORM:
+	case AP1000_PCI_PCB_TESTPLATFORM:
+		puts (AP1xx_PCI_PCB_TESTPLATFORM_STR);
+		break;
+	case AP1xx_DUAL_GE_MEZZ_TESTPLATFORM:
+		puts (AP1xx_DUAL_GE_MEZZ_TESTPLATFORM_STR);
+		break;
+	case AP1xx_SFP_MEZZ_TESTPLATFORM:
+		puts (AP1xx_SFP_MEZZ_TESTPLATFORM_STR);
+		break;
+	default:
+		puts (AP1xx_UNKNOWN_STR);
+		break;
+	}
+
+	if ((get_platform () & AP1xx_TESTPLATFORM_MASK) != 0) {
+		puts (AP1xx_TESTPLATFORM_STR);
+	} else {
+		puts (AP1xx_PLATFORM_STR);
+	}
+
+	putc ('\n');
+
+	puts ("Serial#: ");
+
+	if (!s) {
+		printf ("### No HW ID - assuming AMIRIX");
+	} else {
+		for (e = s; *e; ++e) {
+			if (*e == ' ')
+				break;
+		}
+
+		for (; s < e; ++s) {
+			putc (*s);
+		}
+	}
+
+	putc ('\n');
+
+	return (0);
 }
 
 
 long int initdram (int board_type)
 {
-    unsigned char *s = getenv ("dramsize");
-
-    if(s != NULL){
-        if((s[0] == '0') && ((s[1] == 'x') || (s[1] == 'X'))){
-            s += 2;
-        }
-        return simple_strtoul(s, NULL, 16);
-    }
-    else{
-        /* give all 64 MB */
+	unsigned char *s = getenv ("dramsize");
+
+	if (s != NULL) {
+		if ((s[0] == '0') && ((s[1] == 'x') || (s[1] == 'X'))) {
+			s += 2;
+		}
+		return simple_strtoul (s, NULL, 16);
+	} else {
+		/* give all 64 MB */
 		return 64 * 1024 * 1024;
-    }
+	}
 }
 
-unsigned int get_platform(void){
-    unsigned int *revision_reg_ptr = (unsigned int *)AP1xx_FPGA_REV_ADDR;
-    return (*revision_reg_ptr & AP1xx_PLATFORM_MASK);
+unsigned int get_platform (void)
+{
+	unsigned int *revision_reg_ptr = (unsigned int *) AP1xx_FPGA_REV_ADDR;
+
+	return (*revision_reg_ptr & AP1xx_PLATFORM_MASK);
 }
 
-unsigned int get_device(void){
-    unsigned int *revision_reg_ptr = (unsigned int *)AP1xx_FPGA_REV_ADDR;
+unsigned int get_device (void)
+{
+	unsigned int *revision_reg_ptr = (unsigned int *) AP1xx_FPGA_REV_ADDR;
 
-    return (*revision_reg_ptr & AP1xx_TARGET_MASK);
+	return (*revision_reg_ptr & AP1xx_TARGET_MASK);
 }
 
-#if 0  // loadace is not working; it appears to be a hardware issue with the system ace.
+#if 0				/* loadace is not working; it appears to be a hardware issue with the system ace. */
 /*
    This function loads FPGA configurations from the SystemACE CompactFlash
 */
-int do_loadace (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_loadace (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-    unsigned char *p = (unsigned char *)AP1000_SYSACE_REGBASE;
-    int cfg;
-
-    if((p[SYSACE_STATREG0] & 0x10) == 0) {
-        p[SYSACE_CTRLREG0] = 0x80;
-        printf ("\nNo CompactFlash Detected\n\n");
-        p[SYSACE_CTRLREG0] = 0x00;
-        return 1;
-    }
-
-    // reset configuration controller: |  0x80
-    // select cpflash                  & ~0x40
-    // cfg start                       |  0x20
-    // wait for cfgstart               & ~0x10
-    // force cfgmode:                  |  0x08
-    // do no force cfgaddr:            & ~0x04
-    // clear mpulock:                  & ~0x02
-    // do not force lock request       & ~0x01
-
-    p[SYSACE_CTRLREG0] = 0x80 | 0x20 | 0x08;
-    p[SYSACE_CTRLREG1] = 0x00;
-
-    // force config address if arg2 exists
-    if (argc == 2) {
-        cfg = simple_strtoul(argv[1], NULL, 10);
-
-        if(cfg > 7) {
-           printf ("\nInvalid Configuration\n\n");
-         p[SYSACE_CTRLREG0] = 0x00;
-           return 1;
-        }
-        // Set config address
-        p[SYSACE_CTRLREG1] = (cfg << 5);
-        // force cfgaddr
-        p[SYSACE_CTRLREG0] |= 0x04;
-
-    } else {
-        cfg = (p[SYSACE_STATREG1] & 0xE0) >> 5;
-    }
-
-    /* release configuration controller */
-    printf("\nLoading V2PRO with config %d...\n", cfg);
-    p[SYSACE_CTRLREG0] &= ~0x80;
-
-
-    while((p[SYSACE_STATREG1] & 0x01) == 0) {
-
-        if(p[SYSACE_ERRREG0] & 0x80) {
-            // attempting to load an invalid configuration makes the cpflash
-            // appear to be removed. Reset here to avoid that problem
-            p[SYSACE_CTRLREG0] = 0x80;
-            printf("\nConfiguration %d Read Error\n\n", cfg);
-            p[SYSACE_CTRLREG0] = 0x00;
-            return 1;
-        }
-    }
-
-    p[SYSACE_CTRLREG0] |= 0x20;
-
-    return 0;
+	unsigned char *p = (unsigned char *) AP1000_SYSACE_REGBASE;
+	int cfg;
+
+	if ((p[SYSACE_STATREG0] & 0x10) == 0) {
+		p[SYSACE_CTRLREG0] = 0x80;
+		printf ("\nNo CompactFlash Detected\n\n");
+		p[SYSACE_CTRLREG0] = 0x00;
+		return 1;
+	}
+
+	/* reset configuration controller: |  0x80 */
+	/* select cpflash                  & ~0x40 */
+	/* cfg start                       |  0x20 */
+	/* wait for cfgstart               & ~0x10 */
+	/* force cfgmode:                  |  0x08 */
+	/* do no force cfgaddr:            & ~0x04 */
+	/* clear mpulock:                  & ~0x02 */
+	/* do not force lock request       & ~0x01 */
+
+	p[SYSACE_CTRLREG0] = 0x80 | 0x20 | 0x08;
+	p[SYSACE_CTRLREG1] = 0x00;
+
+	/* force config address if arg2 exists */
+	if (argc == 2) {
+		cfg = simple_strtoul (argv[1], NULL, 10);
+
+		if (cfg > 7) {
+			printf ("\nInvalid Configuration\n\n");
+			p[SYSACE_CTRLREG0] = 0x00;
+			return 1;
+		}
+		/* Set config address */
+		p[SYSACE_CTRLREG1] = (cfg << 5);
+		/* force cfgaddr */
+		p[SYSACE_CTRLREG0] |= 0x04;
+
+	} else {
+		cfg = (p[SYSACE_STATREG1] & 0xE0) >> 5;
+	}
+
+	/* release configuration controller */
+	printf ("\nLoading V2PRO with config %d...\n", cfg);
+	p[SYSACE_CTRLREG0] &= ~0x80;
+
+
+	while ((p[SYSACE_STATREG1] & 0x01) == 0) {
+
+		if (p[SYSACE_ERRREG0] & 0x80) {
+			/* attempting to load an invalid configuration makes the cpflash */
+			/* appear to be removed. Reset here to avoid that problem */
+			p[SYSACE_CTRLREG0] = 0x80;
+			printf ("\nConfiguration %d Read Error\n\n", cfg);
+			p[SYSACE_CTRLREG0] = 0x00;
+			return 1;
+		}
+	}
+
+	p[SYSACE_CTRLREG0] |= 0x20;
+
+	return 0;
 }
 #endif
 
@@ -260,106 +246,112 @@ int do_loadace (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
   *     -1 if failed
   * </pre>
   */
-int do_swconfigbyte(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){
-    unsigned char *sector_buffer = NULL;
-    unsigned char input_char;
-    int write_result;
-    unsigned int  input_uint;
-
-    /* display value if no argument */
-    if(argc < 2){
-        printf("Software configuration byte is currently: 0x%02x\n",
-               *((unsigned char *) (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET)));
-        return 0;
-    }
-    else if(argc > 3){
-        printf("Too many arguments\n");
-        return -1;
-    }
-
-    /* if 3 arguments, 3rd argument is the address to use */
-    if(argc == 3){
-        input_uint = simple_strtoul(argv[1], NULL, 16);
-        sector_buffer = (unsigned char *)input_uint;
-    }
-    else{
-        sector_buffer = (unsigned char *)DEFAULT_TEMP_ADDR;
-    }
-
-    input_char = simple_strtoul(argv[1], NULL, 0);
-    if((input_char & ~SW_BYTE_MASK) != 0){
-        printf("Input of 0x%02x will be masked to 0x%02x\n",
-                input_char, (input_char & SW_BYTE_MASK));
-        input_char = input_char & SW_BYTE_MASK;
-    }
-
-    memcpy(sector_buffer, (void *)SW_BYTE_SECTOR_ADDR, SW_BYTE_SECTOR_SIZE);
-    sector_buffer[SW_BYTE_SECTOR_OFFSET] = input_char;
-
-
-    printf("Erasing Flash...");
-    if (flash_sect_erase (SW_BYTE_SECTOR_ADDR, (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET))){
-        return -1;
-    }
-
-    printf("Writing to Flash... ");
-    write_result = flash_write(sector_buffer, SW_BYTE_SECTOR_ADDR, SW_BYTE_SECTOR_SIZE);
-    if (write_result != 0) {
-        flash_perror (write_result);
-        return -1;
-    }
-    else{
-        printf("done\n");
-        printf("Software configuration byte is now: 0x%02x\n",
-                *((unsigned char *) (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET)));
-    }
-
-    return 0;
+int do_swconfigbyte (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	unsigned char *sector_buffer = NULL;
+	unsigned char input_char;
+	int write_result;
+	unsigned int input_uint;
+
+	/* display value if no argument */
+	if (argc < 2) {
+		printf ("Software configuration byte is currently: 0x%02x\n",
+			*((unsigned char *) (SW_BYTE_SECTOR_ADDR +
+					     SW_BYTE_SECTOR_OFFSET)));
+		return 0;
+	} else if (argc > 3) {
+		printf ("Too many arguments\n");
+		return -1;
+	}
+
+	/* if 3 arguments, 3rd argument is the address to use */
+	if (argc == 3) {
+		input_uint = simple_strtoul (argv[1], NULL, 16);
+		sector_buffer = (unsigned char *) input_uint;
+	} else {
+		sector_buffer = (unsigned char *) DEFAULT_TEMP_ADDR;
+	}
+
+	input_char = simple_strtoul (argv[1], NULL, 0);
+	if ((input_char & ~SW_BYTE_MASK) != 0) {
+		printf ("Input of 0x%02x will be masked to 0x%02x\n",
+			input_char, (input_char & SW_BYTE_MASK));
+		input_char = input_char & SW_BYTE_MASK;
+	}
+
+	memcpy (sector_buffer, (void *) SW_BYTE_SECTOR_ADDR,
+		SW_BYTE_SECTOR_SIZE);
+	sector_buffer[SW_BYTE_SECTOR_OFFSET] = input_char;
+
+
+	printf ("Erasing Flash...");
+	if (flash_sect_erase
+	    (SW_BYTE_SECTOR_ADDR,
+	     (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET))) {
+		return -1;
+	}
+
+	printf ("Writing to Flash... ");
+	write_result =
+		flash_write (sector_buffer, SW_BYTE_SECTOR_ADDR,
+			     SW_BYTE_SECTOR_SIZE);
+	if (write_result != 0) {
+		flash_perror (write_result);
+		return -1;
+	} else {
+		printf ("done\n");
+		printf ("Software configuration byte is now: 0x%02x\n",
+			*((unsigned char *) (SW_BYTE_SECTOR_ADDR +
+					     SW_BYTE_SECTOR_OFFSET)));
+	}
+
+	return 0;
 }
 
 #define ONE_SECOND 1000000
 
-int do_pause(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){
-    int pause_time;
-    unsigned int delay_time;
-    int break_loop = 0;
-
-    /* display value if no argument */
-    if(argc < 2){
-        pause_time = 1;
-    }
-
-    else if(argc > 2){
-        printf("Too many arguments\n");
-        return -1;
-    }
-    else{
-        pause_time = simple_strtoul(argv[1], NULL, 0);
-    }
-
-    printf("Pausing with a poll time of %d, press any key to reactivate\n", pause_time);
-    delay_time = pause_time * ONE_SECOND;
-    while(break_loop == 0){
-        udelay(delay_time);
-        if(serial_tstc() != 0){
-            break_loop = 1;
-            /* eat user key presses */
-            while(serial_tstc() != 0){
-                serial_getc();
-            }
-        }
-    }
-
-    return 0;
+int do_pause (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	int pause_time;
+	unsigned int delay_time;
+	int break_loop = 0;
+
+	/* display value if no argument */
+	if (argc < 2) {
+		pause_time = 1;
+	}
+
+	else if (argc > 2) {
+		printf ("Too many arguments\n");
+		return -1;
+	} else {
+		pause_time = simple_strtoul (argv[1], NULL, 0);
+	}
+
+	printf ("Pausing with a poll time of %d, press any key to reactivate\n", pause_time);
+	delay_time = pause_time * ONE_SECOND;
+	while (break_loop == 0) {
+		udelay (delay_time);
+		if (serial_tstc () != 0) {
+			break_loop = 1;
+			/* eat user key presses */
+			while (serial_tstc () != 0) {
+				serial_getc ();
+			}
+		}
+	}
+
+	return 0;
 }
 
-int do_swreconfig(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){
-    printf("Triggering software reconfigure (software config byte is 0x%02x)...\n",
-           *((unsigned char *) (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET)));
-    udelay (1000);
-    *((unsigned char*)AP1000_CPLD_BASE) = 1;
+int do_swreconfig (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	printf ("Triggering software reconfigure (software config byte is 0x%02x)...\n",
+		*((unsigned char *) (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET)));
+	udelay (1000);
+	*((unsigned char *) AP1000_CPLD_BASE) = 1;
 
-    return 0;
+	return 0;
 }
 
 #define GET_DECIMAL(low_byte) ((low_byte >> 5) * 125)
@@ -372,301 +364,336 @@ int do_swreconfig(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){
 #define TEMP_ETHERM_BIT 0x02
 #define TEMP_LTHERM_BIT 0x01
 
-int do_temp_sensor(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){
-    char cmd;
-    int ret_val = 0;
-    unsigned char temp_byte;
-    int temp;
-    int temp_low;
-    int low;
-    int low_low;
-    int high;
-    int high_low;
-    int therm;
-    unsigned char user_data[4] = { 0 };
-    int user_data_count = 0;
-    int ii;
-
-    if(argc > 1){
-        cmd = argv[1][0];
-    }
-    else{
-        cmd = 's'; /* default to status */
-    }
-
-    user_data_count = argc - 2;
-    for(ii = 0;ii < user_data_count;ii++){
-        user_data[ii] = simple_strtoul(argv[2 + ii], NULL, 0);
-    }
-    switch (cmd){
-        case 's':{
-
-            if(I2CAccess(0x2, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            printf("Status    : 0x%02x  ", temp_byte);
-            if(temp_byte & TEMP_BUSY_BIT){
-                printf("BUSY ");
-            }
-
-            if(temp_byte & TEMP_LHIGH_BIT){
-                printf("LHIGH ");
-            }
-
-            if(temp_byte & TEMP_LLOW_BIT){
-                printf("LLOW ");
-            }
-
-            if(temp_byte & TEMP_EHIGH_BIT){
-                printf("EHIGH ");
-            }
-
-            if(temp_byte & TEMP_ELOW_BIT){
-                printf("ELOW ");
-            }
-
-            if(temp_byte & TEMP_OPEN_BIT){
-                printf("OPEN ");
-            }
-
-            if(temp_byte & TEMP_ETHERM_BIT){
-                printf("ETHERM ");
-            }
-
-            if(temp_byte & TEMP_LTHERM_BIT){
-                printf("LTHERM");
-            }
-            printf("\n");
-
-            if(I2CAccess(0x3, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            printf("Config    : 0x%02x  ", temp_byte);
-
-            if(I2CAccess(0x4, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                printf("\n");
-                goto fail;
-            }
-            printf("Conversion: 0x%02x\n", temp_byte);
-            if(I2CAccess(0x22, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            printf("Cons Alert: 0x%02x  ", temp_byte);
-
-            if(I2CAccess(0x21, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                printf("\n");
-                goto fail;
-            }
-            printf("Therm Hyst: %d\n", temp_byte);
-
-            if(I2CAccess(0x0, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            temp = temp_byte;
-            if(I2CAccess(0x6, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            low = temp_byte;
-            if(I2CAccess(0x5, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            high = temp_byte;
-            if(I2CAccess(0x20, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            therm = temp_byte;
-            printf("Local Temp: %2d     Low: %2d     High: %2d     THERM: %2d\n", temp, low, high, therm);
-
-            if(I2CAccess(0x1, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            temp = temp_byte;
-            if(I2CAccess(0x10, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            temp_low = temp_byte;
-            if(I2CAccess(0x8, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            low = temp_byte;
-            if(I2CAccess(0x14, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            low_low = temp_byte;
-            if(I2CAccess(0x7, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            high = temp_byte;
-            if(I2CAccess(0x13, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            high_low = temp_byte;
-            if(I2CAccess(0x19, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            therm = temp_byte;
-            if(I2CAccess(0x11, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &temp_byte, I2C_READ) != 0){
-                goto fail;
-            }
-            printf("Ext Temp  : %2d.%03d Low: %2d.%03d High: %2d.%03d THERM: %2d Offset: %2d\n", temp, GET_DECIMAL(temp_low), low, GET_DECIMAL(low_low), high, GET_DECIMAL(high_low), therm, temp_byte);
-            break;
-        }
-        case 'l':{ /* alter local limits : low, high, therm */
-            if(argc < 3){
-                goto usage;
-            }
-
-            /* low */
-            if(I2CAccess(0xC, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[0], I2C_WRITE) != 0){
-                goto fail;
-            }
-
-            if(user_data_count > 1){
-                /* high */
-                if(I2CAccess(0xB, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[1], I2C_WRITE) != 0){
-                    goto fail;
-                }
-            }
-
-            if(user_data_count > 2){
-                /* therm */
-                if(I2CAccess(0x20, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[2], I2C_WRITE) != 0){
-                    goto fail;
-                }
-            }
-            break;
-        }
-        case 'e':{ /* alter external limits: low, high, therm, offset */
-            if(argc < 3){
-                goto usage;
-            }
-
-            /* low */
-            if(I2CAccess(0xE, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[0], I2C_WRITE) != 0){
-                goto fail;
-            }
-
-            if(user_data_count > 1){
-                /* high */
-                if(I2CAccess(0xD, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[1], I2C_WRITE) != 0){
-                    goto fail;
-                }
-            }
-
-            if(user_data_count > 2){
-                /* therm */
-                if(I2CAccess(0x19, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[2], I2C_WRITE) != 0){
-                    goto fail;
-                }
-            }
-
-            if(user_data_count > 3){
-                /* offset */
-                if(I2CAccess(0x11, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[3], I2C_WRITE) != 0){
-                    goto fail;
-                }
-            }
-            break;
-        }
-        case 'c':{ /* alter config settings: config, conv, cons alert, therm hyst */
-            if(argc < 3){
-                goto usage;
-            }
-
-            /* config */
-            if(I2CAccess(0x9, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[0], I2C_WRITE) != 0){
-                goto fail;
-            }
-
-            if(user_data_count > 1){
-                /* conversion */
-                if(I2CAccess(0xA, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[1], I2C_WRITE) != 0){
-                    goto fail;
-                }
-            }
-
-            if(user_data_count > 2){
-                /* cons alert */
-                if(I2CAccess(0x22, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[2], I2C_WRITE) != 0){
-                    goto fail;
-                }
-            }
-
-            if(user_data_count > 3){
-                /* therm hyst */
-                if(I2CAccess(0x21, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL, &user_data[3], I2C_WRITE) != 0){
-                    goto fail;
-                }
-            }
-            break;
-        }
-        default:{
-            goto usage;
-        }
-    }
-
-    goto done;
- fail:
-    printf("Access to sensor failed\n");
-    ret_val = -1;
-    goto done;
- usage:
-    printf ("Usage:\n%s\n", cmdtp->help);
-
- done:
-     return ret_val;
+int do_temp_sensor (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	char cmd;
+	int ret_val = 0;
+	unsigned char temp_byte;
+	int temp;
+	int temp_low;
+	int low;
+	int low_low;
+	int high;
+	int high_low;
+	int therm;
+	unsigned char user_data[4] = { 0 };
+	int user_data_count = 0;
+	int ii;
+
+	if (argc > 1) {
+		cmd = argv[1][0];
+	} else {
+		cmd = 's';	/* default to status */
+	}
+
+	user_data_count = argc - 2;
+	for (ii = 0; ii < user_data_count; ii++) {
+		user_data[ii] = simple_strtoul (argv[2 + ii], NULL, 0);
+	}
+	switch (cmd) {
+	case 's':
+		if (I2CAccess
+		    (0x2, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		printf ("Status    : 0x%02x  ", temp_byte);
+		if (temp_byte & TEMP_BUSY_BIT)
+			printf ("BUSY ");
+
+		if (temp_byte & TEMP_LHIGH_BIT)
+			printf ("LHIGH ");
+
+		if (temp_byte & TEMP_LLOW_BIT)
+			printf ("LLOW ");
+
+		if (temp_byte & TEMP_EHIGH_BIT)
+			printf ("EHIGH ");
+
+		if (temp_byte & TEMP_ELOW_BIT)
+			printf ("ELOW ");
+
+		if (temp_byte & TEMP_OPEN_BIT)
+			printf ("OPEN ");
+
+		if (temp_byte & TEMP_ETHERM_BIT)
+			printf ("ETHERM ");
+
+		if (temp_byte & TEMP_LTHERM_BIT)
+			printf ("LTHERM");
+
+		printf ("\n");
+
+		if (I2CAccess
+		    (0x3, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		printf ("Config    : 0x%02x  ", temp_byte);
+
+		if (I2CAccess
+		    (0x4, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			printf ("\n");
+			goto fail;
+		}
+		printf ("Conversion: 0x%02x\n", temp_byte);
+		if (I2CAccess
+		    (0x22, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		printf ("Cons Alert: 0x%02x  ", temp_byte);
+
+		if (I2CAccess
+		    (0x21, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			printf ("\n");
+			goto fail;
+		}
+		printf ("Therm Hyst: %d\n", temp_byte);
+
+		if (I2CAccess
+		    (0x0, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		temp = temp_byte;
+		if (I2CAccess
+		    (0x6, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		low = temp_byte;
+		if (I2CAccess
+		    (0x5, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		high = temp_byte;
+		if (I2CAccess
+		    (0x20, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		therm = temp_byte;
+		printf ("Local Temp: %2d     Low: %2d     High: %2d     THERM: %2d\n", temp, low, high, therm);
+
+		if (I2CAccess
+		    (0x1, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		temp = temp_byte;
+		if (I2CAccess
+		    (0x10, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		temp_low = temp_byte;
+		if (I2CAccess
+		    (0x8, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		low = temp_byte;
+		if (I2CAccess
+		    (0x14, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		low_low = temp_byte;
+		if (I2CAccess
+		    (0x7, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		high = temp_byte;
+		if (I2CAccess
+		    (0x13, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		high_low = temp_byte;
+		if (I2CAccess
+		    (0x19, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		therm = temp_byte;
+		if (I2CAccess
+		    (0x11, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &temp_byte, I2C_READ) != 0) {
+			goto fail;
+		}
+		printf ("Ext Temp  : %2d.%03d Low: %2d.%03d High: %2d.%03d THERM: %2d Offset: %2d\n", temp, GET_DECIMAL (temp_low), low, GET_DECIMAL (low_low), high, GET_DECIMAL (high_low), therm, temp_byte);
+		break;
+	case 'l':		/* alter local limits : low, high, therm */
+		if (argc < 3) {
+			goto usage;
+		}
+
+		/* low */
+		if (I2CAccess
+		    (0xC, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &user_data[0], I2C_WRITE) != 0) {
+			goto fail;
+		}
+
+		if (user_data_count > 1) {
+			/* high */
+			if (I2CAccess
+			    (0xB, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+			     &user_data[1], I2C_WRITE) != 0) {
+				goto fail;
+			}
+		}
+
+		if (user_data_count > 2) {
+			/* therm */
+			if (I2CAccess
+			    (0x20, I2C_SENSOR_DEV,
+			     I2C_SENSOR_CHIP_SEL, &user_data[2],
+			     I2C_WRITE) != 0) {
+				goto fail;
+			}
+		}
+		break;
+	case 'e':		/* alter external limits: low, high, therm, offset */
+		if (argc < 3) {
+			goto usage;
+		}
+
+		/* low */
+		if (I2CAccess
+		    (0xE, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &user_data[0], I2C_WRITE) != 0) {
+			goto fail;
+		}
+
+		if (user_data_count > 1) {
+			/* high */
+			if (I2CAccess
+			    (0xD, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+			     &user_data[1], I2C_WRITE) != 0) {
+				goto fail;
+			}
+		}
+
+		if (user_data_count > 2) {
+			/* therm */
+			if (I2CAccess
+			    (0x19, I2C_SENSOR_DEV,
+			     I2C_SENSOR_CHIP_SEL, &user_data[2],
+			     I2C_WRITE) != 0) {
+				goto fail;
+			}
+		}
+
+		if (user_data_count > 3) {
+			/* offset */
+			if (I2CAccess
+			    (0x11, I2C_SENSOR_DEV,
+			     I2C_SENSOR_CHIP_SEL, &user_data[3],
+			     I2C_WRITE) != 0) {
+				goto fail;
+			}
+		}
+		break;
+	case 'c':		/* alter config settings: config, conv, cons alert, therm hyst */
+		if (argc < 3) {
+			goto usage;
+		}
+
+		/* config */
+		if (I2CAccess
+		    (0x9, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+		     &user_data[0], I2C_WRITE) != 0) {
+			goto fail;
+		}
+
+		if (user_data_count > 1) {
+			/* conversion */
+			if (I2CAccess
+			    (0xA, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
+			     &user_data[1], I2C_WRITE) != 0) {
+				goto fail;
+			}
+		}
+
+		if (user_data_count > 2) {
+			/* cons alert */
+			if (I2CAccess
+			    (0x22, I2C_SENSOR_DEV,
+			     I2C_SENSOR_CHIP_SEL, &user_data[2],
+			     I2C_WRITE) != 0) {
+				goto fail;
+			}
+		}
+
+		if (user_data_count > 3) {
+			/* therm hyst */
+			if (I2CAccess
+			    (0x21, I2C_SENSOR_DEV,
+			     I2C_SENSOR_CHIP_SEL, &user_data[3],
+			     I2C_WRITE) != 0) {
+				goto fail;
+			}
+		}
+		break;
+	default:
+		goto usage;
+	}
+
+	goto done;
+fail:
+	printf ("Access to sensor failed\n");
+	ret_val = -1;
+	goto done;
+usage:
+	printf ("Usage:\n%s\n", cmdtp->help);
+
+done:
+	return ret_val;
 }
 
-U_BOOT_CMD(
-    temp,    6,    0,    do_temp_sensor,
-    "temp    - interact with the temperature sensor\n",
-    "temp [s]\n"
-    "        - Show status.\n"
-    "temp l LOW [HIGH] [THERM]\n"
-    "        - Set local limits.\n"
-    "temp e LOW [HIGH] [THERM] [OFFSET]\n"
-    "        - Set external limits.\n"
-    "temp c CONFIG [CONVERSION] [CONS. ALERT] [THERM HYST]\n"
-    "        - Set config options.\n"
-    "\n"
-    "All values can be decimal or hex (hex preceded with 0x).\n"
-    "Only whole numbers are supported for external limits.\n"
-);
+U_BOOT_CMD (temp, 6, 0, do_temp_sensor,
+	    "temp    - interact with the temperature sensor\n",
+	    "temp [s]\n"
+	    "        - Show status.\n"
+	    "temp l LOW [HIGH] [THERM]\n"
+	    "        - Set local limits.\n"
+	    "temp e LOW [HIGH] [THERM] [OFFSET]\n"
+	    "        - Set external limits.\n"
+	    "temp c CONFIG [CONVERSION] [CONS. ALERT] [THERM HYST]\n"
+	    "        - Set config options.\n"
+	    "\n"
+	    "All values can be decimal or hex (hex preceded with 0x).\n"
+	    "Only whole numbers are supported for external limits.\n");
 
 #if 0
-U_BOOT_CMD(
-    loadace,    2,    0,     do_loadace,
-    "loadace - load fpga configuration from System ACE compact flash\n",
-    "N\n"
-    "    - Load configuration N (0-7) from System ACE compact flash\n"
-    "loadace\n"
-    "    - loads default configuration\n"
-);
+U_BOOT_CMD (loadace, 2, 0, do_loadace,
+	    "loadace - load fpga configuration from System ACE compact flash\n",
+	    "N\n"
+	    "    - Load configuration N (0-7) from System ACE compact flash\n"
+	    "loadace\n" "    - loads default configuration\n");
 #endif
 
-U_BOOT_CMD(
-    swconfig,    2,    0,     do_swconfigbyte,
-    "swconfig- display or modify the software configuration byte\n",
-    "N [ADDRESS]\n"
-    "    - set software configuration byte to N, optionally use ADDRESS as\n"
-    "      location of buffer for flash copy\n"
-    "swconfig\n"
-    "    - display software configuration byte\n"
-);
-
-U_BOOT_CMD(
-    pause,    2,    0,     do_pause,
-    "pause   - sleep processor until any key is pressed with poll time of N seconds\n",
-    "N\n"
-    "    - sleep processor until any key is pressed with poll time of N seconds\n"
-    "pause\n"
-    "    - sleep processor until any key is pressed with poll time of 1 second\n"
-);
-
-U_BOOT_CMD(
-    swrecon,    1,    0,     do_swreconfig,
-    "swrecon - trigger a board reconfigure to the software selected configuration\n",
-    "\n"
-    "    - trigger a board reconfigure to the software selected configuration\n"
-);
-
+U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte,
+	    "swconfig- display or modify the software configuration byte\n",
+	    "N [ADDRESS]\n"
+	    "    - set software configuration byte to N, optionally use ADDRESS as\n"
+	    "      location of buffer for flash copy\n"
+	    "swconfig\n" "    - display software configuration byte\n");
+
+U_BOOT_CMD (pause, 2, 0, do_pause,
+	    "pause   - sleep processor until any key is pressed with poll time of N seconds\n",
+	    "N\n"
+	    "    - sleep processor until any key is pressed with poll time of N seconds\n"
+	    "pause\n"
+	    "    - sleep processor until any key is pressed with poll time of 1 second\n");
+
+U_BOOT_CMD (swrecon, 1, 0, do_swreconfig,
+	    "swrecon - trigger a board reconfigure to the software selected configuration\n",
+	    "\n"
+	    "    - trigger a board reconfigure to the software selected configuration\n");
diff --git a/board/amirix/ap1000/ap1000.h b/board/amirix/ap1000/ap1000.h
index c93736f..118c4d1 100644
--- a/board/amirix/ap1000/ap1000.h
+++ b/board/amirix/ap1000/ap1000.h
@@ -20,22 +20,22 @@
  */
 #define AP1xx_FPGA_REV_ADDR 0x29000000
 
-#define AP1xx_PLATFORM_MASK      0xFF000000
-#define AP100_BASELINE_PLATFORM  0x01000000
-#define AP1xx_QUADGE_PLATFORM    0x02000000
-#define AP1xx_MGT_REF_PLATFORM   0x03000000
-#define AP1xx_STANDARD_PLATFORM  0x04000000
-#define AP1xx_DUAL_PLATFORM      0x05000000
+#define AP1xx_PLATFORM_MASK	 0xFF000000
+#define AP100_BASELINE_PLATFORM	 0x01000000
+#define AP1xx_QUADGE_PLATFORM	 0x02000000
+#define AP1xx_MGT_REF_PLATFORM	 0x03000000
+#define AP1xx_STANDARD_PLATFORM	 0x04000000
+#define AP1xx_DUAL_PLATFORM	 0x05000000
 #define AP1xx_BASE_SRAM_PLATFORM 0x06000000
 
 #define AP1000_BASELINE_PLATFORM 0x21000000
 
-#define AP1xx_TESTPLATFORM_MASK         0xC0000000
-#define AP1xx_PCI_PCB_TESTPLATFORM      0xC0000000
+#define AP1xx_TESTPLATFORM_MASK		0xC0000000
+#define AP1xx_PCI_PCB_TESTPLATFORM	0xC0000000
 #define AP1xx_DUAL_GE_MEZZ_TESTPLATFORM 0xC1000000
-#define AP1xx_SFP_MEZZ_TESTPLATFORM     0xC2000000
+#define AP1xx_SFP_MEZZ_TESTPLATFORM	0xC2000000
 
-#define AP1000_PCI_PCB_TESTPLATFORM      0xC3000000
+#define AP1000_PCI_PCB_TESTPLATFORM	 0xC3000000
 
 #define AP1xx_TARGET_MASK  0x00FF0000
 #define AP1xx_AP107_TARGET 0x00010000
@@ -46,18 +46,18 @@
 
 #define AP1xx_UNKNOWN_STR "Unknown"
 
-#define AP1xx_PLATFORM_STR           " Platform"
+#define AP1xx_PLATFORM_STR	     " Platform"
 #define AP1xx_BASELINE_PLATFORM_STR  "Baseline"
 #define AP1xx_QUADGE_PLATFORM_STR    "Quad GE"
 #define AP1xx_MGT_REF_PLATFORM_STR   "MGT Reference"
 #define AP1xx_STANDARD_PLATFORM_STR  "Standard"
-#define AP1xx_DUAL_PLATFORM_STR      "Dual"
+#define AP1xx_DUAL_PLATFORM_STR	     "Dual"
 #define AP1xx_BASE_SRAM_PLATFORM_STR "Baseline with SRAM"
 
-#define AP1xx_TESTPLATFORM_STR              " Test Platform"
-#define AP1xx_PCI_PCB_TESTPLATFORM_STR      "Base"
+#define AP1xx_TESTPLATFORM_STR		    " Test Platform"
+#define AP1xx_PCI_PCB_TESTPLATFORM_STR	    "Base"
 #define AP1xx_DUAL_GE_MEZZ_TESTPLATFORM_STR "Dual GE Mezzanine"
-#define AP1xx_SFP_MEZZ_TESTPLATFORM_STR     "SFP Mezzanine"
+#define AP1xx_SFP_MEZZ_TESTPLATFORM_STR	    "SFP Mezzanine"
 
 #define AP1xx_TARGET_STR       " Board"
 #define AP1xx_AP107_TARGET_STR "AP107"
@@ -78,84 +78,84 @@
  */
 #define AP1000_SYSACE_REGBASE  0x28000000
 
-#define SYSACE_STATREG0 0x04 // 7:0
-#define SYSACE_STATREG1 0x05 // 15:8
-#define SYSACE_STATREG2 0x06 // 23:16
-#define SYSACE_STATREG3 0x07 // 31:24
+#define SYSACE_STATREG0 0x04 /* 7:0 */
+#define SYSACE_STATREG1 0x05 /* 15:8 */
+#define SYSACE_STATREG2 0x06 /* 23:16 */
+#define SYSACE_STATREG3 0x07 /* 31:24 */
 
-#define SYSACE_ERRREG0 0x08 // 7:0
-#define SYSACE_ERRREG1 0x09 // 15:8
-#define SYSACE_ERRREG2 0x0a // 23:16
-#define SYSACE_ERRREG3 0x0b // 31:24
+#define SYSACE_ERRREG0 0x08 /* 7:0 */
+#define SYSACE_ERRREG1 0x09 /* 15:8 */
+#define SYSACE_ERRREG2 0x0a /* 23:16 */
+#define SYSACE_ERRREG3 0x0b /* 31:24 */
 
-#define SYSACE_CTRLREG0 0x18 // 7:0
-#define SYSACE_CTRLREG1 0x19 // 15:8
-#define SYSACE_CTRLREG2 0x1A // 23:16
-#define SYSACE_CTRLREG3 0x1B // 31:24
+#define SYSACE_CTRLREG0 0x18 /* 7:0 */
+#define SYSACE_CTRLREG1 0x19 /* 15:8 */
+#define SYSACE_CTRLREG2 0x1A /* 23:16 */
+#define SYSACE_CTRLREG3 0x1B /* 31:24 */
 
 /*
  *  Software reconfig thing
  */
-#define SW_BYTE_SECTOR_ADDR     0x24FE0000
-#define SW_BYTE_SECTOR_OFFSET   0x0001FFFF
-#define SW_BYTE_SECTOR_SIZE     0x00020000
-#define SW_BYTE_MASK            0x00000003
+#define SW_BYTE_SECTOR_ADDR	0x24FE0000
+#define SW_BYTE_SECTOR_OFFSET	0x0001FFFF
+#define SW_BYTE_SECTOR_SIZE	0x00020000
+#define SW_BYTE_MASK		0x00000003
 
-#define DEFAULT_TEMP_ADDR       0x00100000
+#define DEFAULT_TEMP_ADDR	0x00100000
 
-#define AP1000_CPLD_BASE       0x26000000
+#define AP1000_CPLD_BASE	0x26000000
 
 /* PowerSpan II Stuff */
 #define PSII_SYNC() asm("eieio")
 #define PSPAN_BASEADDR 0x30000000
-#define EEPROM_DEFAULT { 0x01,       /* Byte 0 - Long Load = 0x02, short = 01, use 0xff for try no load */  \
-                        0x0,0x0,0x0, /* Bytes 1 - 3 Power span reserved */ \
-                        0x0,         /* Byte 4 - Powerspan reserved  - start of short load */ \
-                        0x0F,        /* Byte 5 - Enable PCI 1 & 2 as Bus masters and Memory targets. */ \
-                        0x0E,        /* Byte 6 - PCI 1 Target image prefetch - on for image 0,1,2, off for i20 & 3. */ \
-                        0x00, 0x00,  /* Byte 7,8 - PCI-1 Subsystem ID - */ \
-                        0x00, 0x00,  /* Byte 9,10 - PCI-1 Subsystem Vendor Id -  */ \
-                        0x00,        /* Byte 11 - No PCI interrupt generation on PCI-1 PCI-2 int A */ \
-                        0x1F,        /* Byte 12 - PCI-1 enable bridge registers, all target images */ \
-                        0xBA,        /* Byte 13 - Target 0 image 128 Meg(Ram), Target 1 image 64 Meg. (config Flash/CPLD )*/ \
-                        0xA0,        /* Byte 14 - Target 2 image 64 Meg(program Flash), target 3 64k. */ \
-                        0x00,        /* Byte 15 - Vital Product Data Disabled. */ \
-                        0x88,        /* Byte 16 - PCI arbiter config complete, all requests routed through PCI-1, Unlock PCI-1  */ \
-                        0x40,        /* Byte 17 - Interrupt direction control - PCI-1 Int A out, everything else in. */ \
-                        0x00,        /* Byte 18 - I2O disabled */ \
-                        0x00,        /* Byte 19 - PCI-2 Target image prefetch - off for all images. */ \
-                        0x00,0x00,   /* Bytes 20,21 - PCI 2 Subsystem Id */ \
-                        0x00,0x00,   /* Bytes 22,23 - PCI 2 Subsystem Vendor id */ \
-                        0x0C,        /* Byte 24 - PCI-2 BAR enables, target image 0, & 1 */ \
-                        0xBB,        /* Byte 25 - PCI-2 target 0 - 128 Meg(Ram), target 1  - 128 Meg (program/config flash) */ \
-                        0x00,        /* Byte 26 - PCI-2 target 2 & 3 unused. */ \
-                        0x00,0x00,0x00,0x00,0x00, /* Bytes 27,28,29,30, 31 - Reserved */ \
-                        /* Long Load Information */ \
-                        0x82,0x60,   /* Bytes 32,33 - PCI-1 Device ID - Powerspan II */ \
-                        0x10,0xE3,   /* Bytes 24,35 - PCI-1 Vendor ID - Tundra */ \
-                        0x06,        /* Byte 36 - PCI-1 Class Base - Bridge device. */ \
-                        0x80,        /* Byte 37 - PCI-1 Class sub class - Other bridge. */ \
-                        0x00,        /* Byte 38 - PCI-1 Class programing interface - Other bridge */ \
-                        0x01,        /* Byte 39 - Power span revision 1. */ \
-                        0x6E,        /* Byte 40 - PB SI0 enabled, translation enabled, decode enabled, 64 Meg */ \
-                        0x40,        /* Byte 41 - PB SI0 memory command mode, PCI-1 dest */ \
-                        0x22,        /* Byte 42 - Prefetch discard after read, PCI-little endian conversion, 32 byte prefetch */ \
-                        0x00,0x00,   /* Bytes 43, 44 - Translation address for SI0, set to zero for now. */ \
-                        0x0E,        /* Byte 45 - Translation address (0) and PB bus master enables - all. */ \
-                        0x2c,00,00,  /* Bytes 46,47,48 - PB SI0 processor base address - 0x2C000000 */ \
-                        0x30,00,00,  /* Bytes 49,50,51 - PB Address for Powerspan registers - 0x30000000, big Endian */ \
-                        0x82,0x60,   /* Bytes 52, 53 - PCI-2 Device ID - Powerspan II */ \
-                        0x10,0xE3,   /* Bytes 54,55 - PCI 2 Vendor Id - Tundra */ \
-                        0x06,        /* Byte 56 - PCI-2 Class Base - Bridge device */ \
-                        0x80,        /* Byte 57 - PCI-2 Class sub class - Other Bridge. */ \
-                        0x00,        /* Byte 58 - PCI-2 class programming interface - Other bridge */ \
-                        0x01,        /* Byte 59 - PCI-2 class revision  1 */ \
-                        0x00,0x00,0x00,0x00 }; /* Bytes 60,61, 62, 63 - Powerspan reserved */
-
-
-#define EEPROM_LENGTH   64  /* Long Load */
-
-#define I2C_SENSOR_DEV      0x9
+#define EEPROM_DEFAULT { 0x01,	     /* Byte 0 - Long Load = 0x02, short = 01, use 0xff for try no load */  \
+			0x0,0x0,0x0, /* Bytes 1 - 3 Power span reserved */ \
+			0x0,	     /* Byte 4 - Powerspan reserved  - start of short load */ \
+			0x0F,	     /* Byte 5 - Enable PCI 1 & 2 as Bus masters and Memory targets. */ \
+			0x0E,	     /* Byte 6 - PCI 1 Target image prefetch - on for image 0,1,2, off for i20 & 3. */ \
+			0x00, 0x00,  /* Byte 7,8 - PCI-1 Subsystem ID - */ \
+			0x00, 0x00,  /* Byte 9,10 - PCI-1 Subsystem Vendor Id -	 */ \
+			0x00,	     /* Byte 11 - No PCI interrupt generation on PCI-1 PCI-2 int A */ \
+			0x1F,	     /* Byte 12 - PCI-1 enable bridge registers, all target images */ \
+			0xBA,	     /* Byte 13 - Target 0 image 128 Meg(Ram), Target 1 image 64 Meg. (config Flash/CPLD )*/ \
+			0xA0,	     /* Byte 14 - Target 2 image 64 Meg(program Flash), target 3 64k. */ \
+			0x00,	     /* Byte 15 - Vital Product Data Disabled. */ \
+			0x88,	     /* Byte 16 - PCI arbiter config complete, all requests routed through PCI-1, Unlock PCI-1	*/ \
+			0x40,	     /* Byte 17 - Interrupt direction control - PCI-1 Int A out, everything else in. */ \
+			0x00,	     /* Byte 18 - I2O disabled */ \
+			0x00,	     /* Byte 19 - PCI-2 Target image prefetch - off for all images. */ \
+			0x00,0x00,   /* Bytes 20,21 - PCI 2 Subsystem Id */ \
+			0x00,0x00,   /* Bytes 22,23 - PCI 2 Subsystem Vendor id */ \
+			0x0C,	     /* Byte 24 - PCI-2 BAR enables, target image 0, & 1 */ \
+			0xBB,	     /* Byte 25 - PCI-2 target 0 - 128 Meg(Ram), target 1  - 128 Meg (program/config flash) */ \
+			0x00,	     /* Byte 26 - PCI-2 target 2 & 3 unused. */ \
+			0x00,0x00,0x00,0x00,0x00, /* Bytes 27,28,29,30, 31 - Reserved */ \
+			/* Long Load Information */ \
+			0x82,0x60,   /* Bytes 32,33 - PCI-1 Device ID - Powerspan II */ \
+			0x10,0xE3,   /* Bytes 24,35 - PCI-1 Vendor ID - Tundra */ \
+			0x06,	     /* Byte 36 - PCI-1 Class Base - Bridge device. */ \
+			0x80,	     /* Byte 37 - PCI-1 Class sub class - Other bridge. */ \
+			0x00,	     /* Byte 38 - PCI-1 Class programing interface - Other bridge */ \
+			0x01,	     /* Byte 39 - Power span revision 1. */ \
+			0x6E,	     /* Byte 40 - PB SI0 enabled, translation enabled, decode enabled, 64 Meg */ \
+			0x40,	     /* Byte 41 - PB SI0 memory command mode, PCI-1 dest */ \
+			0x22,	     /* Byte 42 - Prefetch discard after read, PCI-little endian conversion, 32 byte prefetch */ \
+			0x00,0x00,   /* Bytes 43, 44 - Translation address for SI0, set to zero for now. */ \
+			0x0E,	     /* Byte 45 - Translation address (0) and PB bus master enables - all. */ \
+			0x2c,00,00,  /* Bytes 46,47,48 - PB SI0 processor base address - 0x2C000000 */ \
+			0x30,00,00,  /* Bytes 49,50,51 - PB Address for Powerspan registers - 0x30000000, big Endian */ \
+			0x82,0x60,   /* Bytes 52, 53 - PCI-2 Device ID - Powerspan II */ \
+			0x10,0xE3,   /* Bytes 54,55 - PCI 2 Vendor Id - Tundra */ \
+			0x06,	     /* Byte 56 - PCI-2 Class Base - Bridge device */ \
+			0x80,	     /* Byte 57 - PCI-2 Class sub class - Other Bridge. */ \
+			0x00,	     /* Byte 58 - PCI-2 class programming interface - Other bridge */ \
+			0x01,	     /* Byte 59 - PCI-2 class revision	1 */ \
+			0x00,0x00,0x00,0x00 }; /* Bytes 60,61, 62, 63 - Powerspan reserved */
+
+
+#define EEPROM_LENGTH	64  /* Long Load */
+
+#define I2C_SENSOR_DEV	    0x9
 #define I2C_SENSOR_CHIP_SEL 0x4
 
 /*
diff --git a/board/amirix/ap1000/flash.c b/board/amirix/ap1000/flash.c
index f07edf0..1a3b252 100644
--- a/board/amirix/ap1000/flash.c
+++ b/board/amirix/ap1000/flash.c
@@ -94,275 +94,273 @@
 #define FLASH_OFFSET_USER_PROTECTION    0x85
 #define FLASH_OFFSET_INTEL_PROTECTION   0x81
 
-
 #define FLASH_MAN_CFI           0x01000000
 
-
-
-
 typedef union {
-    unsigned char c;
-    unsigned short w;
-    unsigned long l;
+	unsigned char c;
+	unsigned short w;
+	unsigned long l;
 } cfiword_t;
 
 typedef union {
-    unsigned char * cp;
-    unsigned short *wp;
-    unsigned long *lp;
+	unsigned char *cp;
+	unsigned short *wp;
+	unsigned long *lp;
 } cfiptr_t;
 
 #define NUM_ERASE_REGIONS 4
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips    */
-
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /*-----------------------------------------------------------------------
  * Functions
  */
 
-
-
-static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c);
-static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf);
-static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd);
-static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd);
-static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
-static int flash_detect_cfi(flash_info_t * info);
+static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c);
+static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf);
+static void flash_write_cmd (flash_info_t * info, int sect, uchar offset,
+			     uchar cmd);
+static int flash_isequal (flash_info_t * info, int sect, uchar offset,
+			  uchar cmd);
+static int flash_isset (flash_info_t * info, int sect, uchar offset,
+			uchar cmd);
+static int flash_detect_cfi (flash_info_t * info);
 static ulong flash_get_size (ulong base, int banknum);
-static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
-static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt);
+static int flash_write_cfiword (flash_info_t * info, ulong dest,
+				cfiword_t cword);
+static int flash_full_status_check (flash_info_t * info, ulong sector,
+				    ulong tout, char *prompt);
 #ifdef CFG_FLASH_USE_BUFFER_WRITE
-static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
+static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
+				  int len);
 #endif
 /*-----------------------------------------------------------------------
  * create an address based on the offset and the port width
  */
-uchar * flash_make_addr(flash_info_t * info, int sect, int offset)
+uchar *flash_make_addr (flash_info_t * info, int sect, int offset)
 {
-    return ((uchar *)(info->start[sect] + (offset * info->chipwidth)));
+	return ((uchar *) (info->start[sect] + (offset * info->chipwidth)));
 }
+
 /*-----------------------------------------------------------------------
  * read a character at a port width address
  */
-uchar flash_read_uchar(flash_info_t * info, uchar offset)
+uchar flash_read_uchar (flash_info_t * info, uchar offset)
 {
-    if (info->portwidth == FLASH_CFI_8BIT) {
-        volatile uchar *cp;
-        uchar c;
-        cp = flash_make_addr(info, 0, offset);
-        c = *cp;
+	if (info->portwidth == FLASH_CFI_8BIT) {
+		volatile uchar *cp;
+		uchar c;
+
+		cp = flash_make_addr (info, 0, offset);
+		c = *cp;
 #ifdef DEBUG_FLASH
-        printf("flash_read_uchar offset=%04x ptr=%08x c=%02x\n",
-                        offset, (unsigned int)cp, c);
+		printf ("flash_read_uchar offset=%04x ptr=%08x c=%02x\n",
+			offset, (unsigned int) cp, c);
 #endif
-        return (c);
-
-    } else if (info->portwidth == FLASH_CFI_16BIT) {
-        volatile ushort *sp;
-        ushort s;
-        uchar c;
-        sp = (ushort*)flash_make_addr(info, 0, offset);
-        s = *sp;
-        c = (uchar)s;
+		return (c);
+
+	} else if (info->portwidth == FLASH_CFI_16BIT) {
+		volatile ushort *sp;
+		ushort s;
+		uchar c;
+
+		sp = (ushort *) flash_make_addr (info, 0, offset);
+		s = *sp;
+		c = (uchar) s;
 #ifdef DEBUG_FLASH
-        printf("flash_read_uchar offset=%04x ptr=%08x s=%04x c=%02x\n",
-                       offset, (unsigned int)sp, s, c);
+		printf ("flash_read_uchar offset=%04x ptr=%08x s=%04x c=%02x\n", offset, (unsigned int) sp, s, c);
 #endif
-        return (c);
+		return (c);
 
-    }
+	}
 
-    return 0;
+	return 0;
 }
 
 /*-----------------------------------------------------------------------
  * read a short word by swapping for ppc format.
  */
-ushort flash_read_ushort(flash_info_t * info, int sect,  uchar offset)
+ushort flash_read_ushort (flash_info_t * info, int sect, uchar offset)
 {
-    if (info->portwidth == FLASH_CFI_8BIT) {
-        volatile uchar *cp;
-        uchar c0, c1;
-        ushort s;
-        cp = flash_make_addr(info, 0, offset);
-        c1 = cp[2];
-        c0 = cp[0];
-        s = c1<<8 | c0;
+	if (info->portwidth == FLASH_CFI_8BIT) {
+		volatile uchar *cp;
+		uchar c0, c1;
+		ushort s;
+
+		cp = flash_make_addr (info, 0, offset);
+		c1 = cp[2];
+		c0 = cp[0];
+		s = c1 << 8 | c0;
 #ifdef DEBUG_FLASH
-        printf("flash_read_ushort offset=%04x ptr=%08x c1=%02x c0=%02x s=%04x\n",
-                        offset, (unsigned int)cp, c1, c0, s);
+		printf ("flash_read_ushort offset=%04x ptr=%08x c1=%02x c0=%02x s=%04x\n", offset, (unsigned int) cp, c1, c0, s);
 #endif
-        return (s);
-
-    } else if (info->portwidth == FLASH_CFI_16BIT) {
-        volatile ushort *sp;
-        ushort s;
-        uchar c0, c1;
-        sp = (ushort*)flash_make_addr(info, 0, offset);
-        s = *sp;
-        c1 = (uchar)sp[1];
-        c0 = (uchar)sp[0];
-        s = c1<<8 | c0;
+		return (s);
+
+	} else if (info->portwidth == FLASH_CFI_16BIT) {
+		volatile ushort *sp;
+		ushort s;
+		uchar c0, c1;
+
+		sp = (ushort *) flash_make_addr (info, 0, offset);
+		s = *sp;
+		c1 = (uchar) sp[1];
+		c0 = (uchar) sp[0];
+		s = c1 << 8 | c0;
 #ifdef DEBUG_FLASH
-        printf("flash_read_ushort offset=%04x ptr=%08x c1=%02x c0=%02x s=%04x\n",
-                        offset, (unsigned int)sp, c1, c0, s);
+		printf ("flash_read_ushort offset=%04x ptr=%08x c1=%02x c0=%02x s=%04x\n", offset, (unsigned int) sp, c1, c0, s);
 #endif
-        return (s);
+		return (s);
 
-    }
+	}
 
-    return 0;
+	return 0;
 }
 
 /*-----------------------------------------------------------------------
  * read a long word by picking the least significant byte of each maiximum
  * port size word. Swap for ppc format.
  */
-ulong flash_read_long(flash_info_t * info, int sect,  uchar offset)
+ulong flash_read_long (flash_info_t * info, int sect, uchar offset)
 {
-    if (info->portwidth == FLASH_CFI_8BIT) {
-        volatile uchar *cp;
-        uchar c0, c1, c2, c3;
-        ulong l;
-        cp = flash_make_addr(info, 0, offset);
-        c3 = cp[6];
-        c2 = cp[4];
-        c1 = cp[2];
-        c0 = cp[0];
-        l = c3<<24 | c2<<16 | c1<<8 | c0;
+	if (info->portwidth == FLASH_CFI_8BIT) {
+		volatile uchar *cp;
+		uchar c0, c1, c2, c3;
+		ulong l;
+
+		cp = flash_make_addr (info, 0, offset);
+		c3 = cp[6];
+		c2 = cp[4];
+		c1 = cp[2];
+		c0 = cp[0];
+		l = c3 << 24 | c2 << 16 | c1 << 8 | c0;
 #ifdef DEBUG_FLASH
-        printf("flash_read_long offset=%04x ptr=%08x c3=%02x c2=%02x c1=%02x c0=%02x l=%08x\n",
-                        offset, (unsigned int)cp, c3, c2, c1, c0, l);
+		printf ("flash_read_long offset=%04x ptr=%08x c3=%02x c2=%02x c1=%02x c0=%02x l=%08x\n", offset, (unsigned int) cp, c3, c2, c1, c0, l);
 #endif
-        return (l);
-
-    } else if (info->portwidth == FLASH_CFI_16BIT) {
-        volatile ushort *sp;
-        uchar c0, c1, c2, c3;
-        ulong l;
-        sp = (ushort*)flash_make_addr(info, 0, offset);
-        c3 = (uchar)sp[3];
-        c2 = (uchar)sp[2];
-        c1 = (uchar)sp[1];
-        c0 = (uchar)sp[0];
-        l = c3<<24 | c2<<16 | c1<<8 | c0;
+		return (l);
+
+	} else if (info->portwidth == FLASH_CFI_16BIT) {
+		volatile ushort *sp;
+		uchar c0, c1, c2, c3;
+		ulong l;
+
+		sp = (ushort *) flash_make_addr (info, 0, offset);
+		c3 = (uchar) sp[3];
+		c2 = (uchar) sp[2];
+		c1 = (uchar) sp[1];
+		c0 = (uchar) sp[0];
+		l = c3 << 24 | c2 << 16 | c1 << 8 | c0;
 #ifdef DEBUG_FLASH
-        printf("flash_read_long offset=%04x ptr=%08x c3=%02x c2=%02x c1=%02x c0=%02x l=%08x\n",
-                        offset, (unsigned int)sp, c3, c2, c1, c0, l);
+		printf ("flash_read_long offset=%04x ptr=%08x c3=%02x c2=%02x c1=%02x c0=%02x l=%08x\n", offset, (unsigned int) sp, c3, c2, c1, c0, l);
 #endif
-        return (l);
+		return (l);
 
-    }
+	}
 
-    return 0;
+	return 0;
 }
 
 /*-----------------------------------------------------------------------
  */
 unsigned long flash_init (void)
 {
-    unsigned long size;
-
-    size = 0;
-
-    flash_info[0].flash_id = FLASH_UNKNOWN;
-    flash_info[0].portwidth = FLASH_CFI_16BIT;
-    flash_info[0].chipwidth = FLASH_CFI_16BIT;
-    size += flash_info[0].size = flash_get_size(CFG_PROGFLASH_BASE, 0);
-    if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-        printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", 1,
-        flash_info[0].size, flash_info[0].size<<20);
-        };
-
-    flash_info[1].flash_id = FLASH_UNKNOWN;
-    flash_info[1].portwidth = FLASH_CFI_8BIT;
-    flash_info[1].chipwidth = FLASH_CFI_16BIT;
-    size += flash_info[1].size = flash_get_size(CFG_CONFFLASH_BASE, 1);
-    if (flash_info[1].flash_id == FLASH_UNKNOWN) {
-        printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", 2,
-        flash_info[1].size, flash_info[1].size<<20);
-    };
-
-    return (size);
+	unsigned long size;
+
+	size = 0;
+
+	flash_info[0].flash_id = FLASH_UNKNOWN;
+	flash_info[0].portwidth = FLASH_CFI_16BIT;
+	flash_info[0].chipwidth = FLASH_CFI_16BIT;
+	size += flash_info[0].size = flash_get_size (CFG_PROGFLASH_BASE, 0);
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", 1, flash_info[0].size, flash_info[0].size << 20);
+	};
+
+	flash_info[1].flash_id = FLASH_UNKNOWN;
+	flash_info[1].portwidth = FLASH_CFI_8BIT;
+	flash_info[1].chipwidth = FLASH_CFI_16BIT;
+	size += flash_info[1].size = flash_get_size (CFG_CONFFLASH_BASE, 1);
+	if (flash_info[1].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", 2, flash_info[1].size, flash_info[1].size << 20);
+	};
+
+	return (size);
 }
 
 /*-----------------------------------------------------------------------
  */
-int flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
 {
-    int rcode = 0;
-    int prot;
-    int sect;
-
-    if( info->flash_id != FLASH_MAN_CFI) {
-        printf ("Can't erase unknown flash type - aborted\n");
-        return 1;
-    }
-    if ((s_first < 0) || (s_first > s_last)) {
-        printf ("- no sectors to erase\n");
-        return 1;
-    }
-
-    prot = 0;
-    for (sect=s_first; sect<=s_last; ++sect) {
-        if (info->protect[sect]) {
-            prot++;
-        }
-    }
-    if (prot) {
-        printf ("- Warning: %d protected sectors will not be erased!\n",
-            prot);
-    } else {
-        printf ("\n");
-    }
-
-
-    for (sect = s_first; sect<=s_last; sect++) {
-        if (info->protect[sect] == 0) { /* not protected */
-            flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
-            flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
-            flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
-
-            if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) {
-                rcode = 1;
-            } else
-                printf(".");
-        }
-    }
-    printf (" done\n");
-    return rcode;
+	int rcode = 0;
+	int prot;
+	int sect;
+
+	if (info->flash_id != FLASH_MAN_CFI) {
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+	if ((s_first < 0) || (s_first > s_last)) {
+		printf ("- no sectors to erase\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+	} else {
+		printf ("\n");
+	}
+
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			flash_write_cmd (info, sect, 0,
+					 FLASH_CMD_CLEAR_STATUS);
+			flash_write_cmd (info, sect, 0,
+					 FLASH_CMD_BLOCK_ERASE);
+			flash_write_cmd (info, sect, 0,
+					 FLASH_CMD_ERASE_CONFIRM);
+
+			if (flash_full_status_check
+			    (info, sect, info->erase_blk_tout, "erase")) {
+				rcode = 1;
+			} else
+				printf (".");
+		}
+	}
+	printf (" done\n");
+	return rcode;
 }
 
 /*-----------------------------------------------------------------------
  */
-void flash_print_info  (flash_info_t *info)
+void flash_print_info (flash_info_t * info)
 {
-    int i;
-
-    if (info->flash_id != FLASH_MAN_CFI) {
-        printf ("missing or unknown FLASH type\n");
-        return;
-    }
-
-    printf("CFI conformant FLASH (x%d device in x%d mode)",
-           (info->chipwidth  << 3 ), (info->portwidth  << 3 ));
-    printf ("  Size: %ld MB in %d Sectors\n",
-        info->size >> 20, info->sector_count);
-    printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
-           info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
-
-    printf ("  Sector Start Addresses:");
-    for (i=0; i<info->sector_count; ++i) {
-        if ((i % 5) == 0)
-            printf ("\n");
-        printf (" %08lX%5s",
-            info->start[i],
-            info->protect[i] ? " (RO)" : " "
-            );
-    }
-    printf ("\n");
-    return;
+	int i;
+
+	if (info->flash_id != FLASH_MAN_CFI) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	printf ("CFI conformant FLASH (x%d device in x%d mode)",
+		(info->chipwidth << 3), (info->portwidth << 3));
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+	printf (" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n", info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n");
+		printf (" %08lX%5s",
+			info->start[i], info->protect[i] ? " (RO)" : " ");
+	}
+	printf ("\n");
+	return;
 }
 
 /*-----------------------------------------------------------------------
@@ -371,260 +369,281 @@ void flash_print_info  (flash_info_t *info)
  * 1 - write timeout
  * 2 - Flash not erased
  */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 {
-    ulong wp;
-    ulong cp;
-    int aln;
-    cfiword_t cword;
-    int i, rc;
-
-    /* get lower aligned address */
-    wp = (addr & ~(info->portwidth - 1));
-
-    /* handle unaligned start */
-    if((aln = addr - wp) != 0) {
-        cword.l = 0;
-        cp = wp;
-        for(i=0;i<aln; ++i, ++cp)
-            flash_add_byte(info, &cword, (*(uchar *)cp));
-
-        for(; (i< info->portwidth) && (cnt > 0) ; i++) {
-            flash_add_byte(info, &cword, *src++);
-            cnt--;
-            cp++;
-        }
-        for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
-            flash_add_byte(info, &cword, (*(uchar *)cp));
-        if((rc = flash_write_cfiword(info, wp, cword)) != 0)
-            return rc;
-        wp = cp;
-    }
-
+	ulong wp;
+	ulong cp;
+	int aln;
+	cfiword_t cword;
+	int i, rc;
+
+	/* get lower aligned address */
+	wp = (addr & ~(info->portwidth - 1));
+
+	/* handle unaligned start */
+	if ((aln = addr - wp) != 0) {
+		cword.l = 0;
+		cp = wp;
+		for (i = 0; i < aln; ++i, ++cp)
+			flash_add_byte (info, &cword, (*(uchar *) cp));
+
+		for (; (i < info->portwidth) && (cnt > 0); i++) {
+			flash_add_byte (info, &cword, *src++);
+			cnt--;
+			cp++;
+		}
+		for (; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
+			flash_add_byte (info, &cword, (*(uchar *) cp));
+		if ((rc = flash_write_cfiword (info, wp, cword)) != 0)
+			return rc;
+		wp = cp;
+	}
 #ifdef CFG_FLASH_USE_BUFFER_WRITE
-    while(cnt >= info->portwidth) {
-        i = info->buffer_size > cnt? cnt: info->buffer_size;
-        if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
-            return rc;
-        wp += i;
-        src += i;
-        cnt -=i;
-    }
+	while (cnt >= info->portwidth) {
+		i = info->buffer_size > cnt ? cnt : info->buffer_size;
+		if ((rc = flash_write_cfibuffer (info, wp, src, i)) != ERR_OK)
+			return rc;
+		wp += i;
+		src += i;
+		cnt -= i;
+	}
 #else
-    /* handle the aligned part */
-    while(cnt >= info->portwidth) {
-        cword.l = 0;
-        for(i = 0; i < info->portwidth; i++) {
-            flash_add_byte(info, &cword, *src++);
-        }
-        if((rc = flash_write_cfiword(info, wp, cword)) != 0)
-            return rc;
-        wp += info->portwidth;
-        cnt -= info->portwidth;
-    }
+	/* handle the aligned part */
+	while (cnt >= info->portwidth) {
+		cword.l = 0;
+		for (i = 0; i < info->portwidth; i++) {
+			flash_add_byte (info, &cword, *src++);
+		}
+		if ((rc = flash_write_cfiword (info, wp, cword)) != 0)
+			return rc;
+		wp += info->portwidth;
+		cnt -= info->portwidth;
+	}
 #endif /* CFG_FLASH_USE_BUFFER_WRITE */
-    if (cnt == 0) {
-        return (0);
-    }
-
-    /*
-     * handle unaligned tail bytes
-     */
-    cword.l = 0;
-    for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) {
-        flash_add_byte(info, &cword, *src++);
-        --cnt;
-    }
-    for (; i<info->portwidth; ++i, ++cp) {
-        flash_add_byte(info, & cword, (*(uchar *)cp));
-    }
-
-    return flash_write_cfiword(info, wp, cword);
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	cword.l = 0;
+	for (i = 0, cp = wp; (i < info->portwidth) && (cnt > 0); ++i, ++cp) {
+		flash_add_byte (info, &cword, *src++);
+		--cnt;
+	}
+	for (; i < info->portwidth; ++i, ++cp) {
+		flash_add_byte (info, &cword, (*(uchar *) cp));
+	}
+
+	return flash_write_cfiword (info, wp, cword);
 }
 
 /*-----------------------------------------------------------------------
  */
-int flash_real_protect(flash_info_t *info, long sector, int prot)
+int flash_real_protect (flash_info_t * info, long sector, int prot)
 {
-    int retcode = 0;
-
-    flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
-    flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
-    if(prot)
-        flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
-    else
-        flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
-
-    if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout,
-                     prot?"protect":"unprotect")) == 0) {
-
-        info->protect[sector] = prot;
-        /* Intel's unprotect unprotects all locking */
-        if(prot == 0) {
-            int i;
-            for(i = 0 ; i<info->sector_count; i++) {
-                if(info->protect[i])
-                    flash_real_protect(info, i, 1);
-            }
-        }
-    }
-
-    return retcode;
+	int retcode = 0;
+
+	flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+	flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT);
+	if (prot)
+		flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_SET);
+	else
+		flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
+
+	if ((retcode =
+	     flash_full_status_check (info, sector, info->erase_blk_tout,
+				      prot ? "protect" : "unprotect")) == 0) {
+
+		info->protect[sector] = prot;
+		/* Intel's unprotect unprotects all locking */
+		if (prot == 0) {
+			int i;
+
+			for (i = 0; i < info->sector_count; i++) {
+				if (info->protect[i])
+					flash_real_protect (info, i, 1);
+			}
+		}
+	}
+
+	return retcode;
 }
+
 /*-----------------------------------------------------------------------
  *  wait for XSR.7 to be set. Time out with an error if it does not.
  *  This routine does not set the flash to read-array mode.
  */
-static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
+static int flash_status_check (flash_info_t * info, ulong sector, ulong tout,
+			       char *prompt)
 {
-    ulong start;
-
-    /* Wait for command completion */
-    start = get_timer (0);
-    while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
-        if (get_timer(start) > info->erase_blk_tout) {
-            printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]);
-            flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
-            return ERR_TIMOUT;
-        }
-    }
-    return ERR_OK;
+	ulong start;
+
+	/* Wait for command completion */
+	start = get_timer (0);
+	while (!flash_isset (info, sector, 0, FLASH_STATUS_DONE)) {
+		if (get_timer (start) > info->erase_blk_tout) {
+			printf ("Flash %s timeout at address %lx\n", prompt,
+				info->start[sector]);
+			flash_write_cmd (info, sector, 0, FLASH_CMD_RESET);
+			return ERR_TIMOUT;
+		}
+	}
+	return ERR_OK;
 }
+
 /*-----------------------------------------------------------------------
  * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
  * This routine sets the flash to read-array mode.
  */
-static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
+static int flash_full_status_check (flash_info_t * info, ulong sector,
+				    ulong tout, char *prompt)
 {
-    int retcode;
-    retcode = flash_status_check(info, sector, tout, prompt);
-    if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) {
-        retcode = ERR_INVAL;
-        printf("Flash %s error at address %lx\n", prompt,info->start[sector]);
-        if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){
-            printf("Command Sequence Error.\n");
-        } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
-            printf("Block Erase Error.\n");
-                retcode = ERR_NOT_ERASED;
-        } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
-            printf("Locking Error\n");
-        }
-        if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){
-            printf("Block locked.\n");
-            retcode = ERR_PROTECTED;
-        }
-        if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
-            printf("Vpp Low Error.\n");
-    }
-    flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
-    return retcode;
+	int retcode;
+
+	retcode = flash_status_check (info, sector, tout, prompt);
+	if ((retcode == ERR_OK)
+	    && !flash_isequal (info, sector, 0, FLASH_STATUS_DONE)) {
+		retcode = ERR_INVAL;
+		printf ("Flash %s error at address %lx\n", prompt,
+			info->start[sector]);
+		if (flash_isset
+		    (info, sector, 0,
+		     FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)) {
+			printf ("Command Sequence Error.\n");
+		} else if (flash_isset (info, sector, 0, FLASH_STATUS_ECLBS)) {
+			printf ("Block Erase Error.\n");
+			retcode = ERR_NOT_ERASED;
+		} else if (flash_isset (info, sector, 0, FLASH_STATUS_PSLBS)) {
+			printf ("Locking Error\n");
+		}
+		if (flash_isset (info, sector, 0, FLASH_STATUS_DPS)) {
+			printf ("Block locked.\n");
+			retcode = ERR_PROTECTED;
+		}
+		if (flash_isset (info, sector, 0, FLASH_STATUS_VPENS))
+			printf ("Vpp Low Error.\n");
+	}
+	flash_write_cmd (info, sector, 0, FLASH_CMD_RESET);
+	return retcode;
 }
+
 /*-----------------------------------------------------------------------
  */
-static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c)
+static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
 {
-    switch(info->portwidth) {
-    case FLASH_CFI_8BIT:
-        cword->c = c;
-        break;
-    case FLASH_CFI_16BIT:
-        cword->w = (cword->w << 8) | c;
-        break;
-    case FLASH_CFI_32BIT:
-        cword->l = (cword->l << 8) | c;
-    }
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		cword->c = c;
+		break;
+	case FLASH_CFI_16BIT:
+		cword->w = (cword->w << 8) | c;
+		break;
+	case FLASH_CFI_32BIT:
+		cword->l = (cword->l << 8) | c;
+	}
 }
 
-
 /*-----------------------------------------------------------------------
  * make a proper sized command based on the port and chip widths
  */
-static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf)
+static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf)
 {
-    //int i;
-    uchar *cp = (uchar *)cmdbuf;
-    // for(i=0; i< info->portwidth; i++)
-    //  *cp++ = ((i+1) % info->chipwidth) ? '\0':cmd;
-        if (info->portwidth == FLASH_CFI_8BIT && info->chipwidth == FLASH_CFI_16BIT) {
-        cp[0] = cmd;
-        } else if (info->portwidth == FLASH_CFI_16BIT && info->chipwidth == FLASH_CFI_16BIT) {
-        cp[0] = '\0';
-        cp[1] = cmd;
-    };
+	/*int i; */
+	uchar *cp = (uchar *) cmdbuf;
+
+	/* for(i=0; i< info->portwidth; i++) */
+	/*  *cp++ = ((i+1) % info->chipwidth) ? '\0':cmd; */
+	if (info->portwidth == FLASH_CFI_8BIT
+	    && info->chipwidth == FLASH_CFI_16BIT) {
+		cp[0] = cmd;
+	} else if (info->portwidth == FLASH_CFI_16BIT
+		   && info->chipwidth == FLASH_CFI_16BIT) {
+		cp[0] = '\0';
+		cp[1] = cmd;
+	};
 }
 
 /*
  * Write a proper sized command to the correct address
  */
-static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd)
+static void flash_write_cmd (flash_info_t * info, int sect, uchar offset,
+			     uchar cmd)
 {
 
-    volatile cfiptr_t addr;
-    cfiword_t cword;
-    addr.cp = flash_make_addr(info, sect, offset);
-    flash_make_cmd(info, cmd, &cword);
-    switch(info->portwidth) {
-    case FLASH_CFI_8BIT:
-        *addr.cp = cword.c;
-        break;
-    case FLASH_CFI_16BIT:
-        *addr.wp = cword.w;
-        break;
-    case FLASH_CFI_32BIT:
-        *addr.lp = cword.l;
-        break;
-    }
+	volatile cfiptr_t addr;
+	cfiword_t cword;
+
+	addr.cp = flash_make_addr (info, sect, offset);
+	flash_make_cmd (info, cmd, &cword);
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		*addr.cp = cword.c;
+		break;
+	case FLASH_CFI_16BIT:
+		*addr.wp = cword.w;
+		break;
+	case FLASH_CFI_32BIT:
+		*addr.lp = cword.l;
+		break;
+	}
 }
 
 /*-----------------------------------------------------------------------
  */
-static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
+static int flash_isequal (flash_info_t * info, int sect, uchar offset,
+			  uchar cmd)
 {
-    cfiptr_t cptr;
-    cfiword_t cword;
-    int retval;
-    cptr.cp = flash_make_addr(info, sect, offset);
-    flash_make_cmd(info, cmd, &cword);
-    switch(info->portwidth) {
-    case FLASH_CFI_8BIT:
-        retval = (cptr.cp[0] == cword.c);
-        break;
-    case FLASH_CFI_16BIT:
-        retval = (cptr.wp[0] == cword.w);
-        break;
-    case FLASH_CFI_32BIT:
-        retval = (cptr.lp[0] == cword.l);
-        break;
-    default:
-        retval = 0;
-        break;
-    }
-    return retval;
+	cfiptr_t cptr;
+	cfiword_t cword;
+	int retval;
+
+	cptr.cp = flash_make_addr (info, sect, offset);
+	flash_make_cmd (info, cmd, &cword);
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		retval = (cptr.cp[0] == cword.c);
+		break;
+	case FLASH_CFI_16BIT:
+		retval = (cptr.wp[0] == cword.w);
+		break;
+	case FLASH_CFI_32BIT:
+		retval = (cptr.lp[0] == cword.l);
+		break;
+	default:
+		retval = 0;
+		break;
+	}
+	return retval;
 }
+
 /*-----------------------------------------------------------------------
  */
-static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
+static int flash_isset (flash_info_t * info, int sect, uchar offset,
+			uchar cmd)
 {
-    cfiptr_t cptr;
-    cfiword_t cword;
-    int retval;
-    cptr.cp = flash_make_addr(info, sect, offset);
-    flash_make_cmd(info, cmd, &cword);
-    switch(info->portwidth) {
-    case FLASH_CFI_8BIT:
-        retval = ((cptr.cp[0] & cword.c) == cword.c);
-        break;
-    case FLASH_CFI_16BIT:
-        retval = ((cptr.wp[0] & cword.w) == cword.w);
-        break;
-    case FLASH_CFI_32BIT:
-        retval = ((cptr.lp[0] & cword.l) == cword.l);
-        break;
-    default:
-        retval = 0;
-        break;
-    }
-    return retval;
+	cfiptr_t cptr;
+	cfiword_t cword;
+	int retval;
+
+	cptr.cp = flash_make_addr (info, sect, offset);
+	flash_make_cmd (info, cmd, &cword);
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		retval = ((cptr.cp[0] & cword.c) == cword.c);
+		break;
+	case FLASH_CFI_16BIT:
+		retval = ((cptr.wp[0] & cword.w) == cword.w);
+		break;
+	case FLASH_CFI_32BIT:
+		retval = ((cptr.lp[0] & cword.l) == cword.l);
+		break;
+	default:
+		retval = 0;
+		break;
+	}
+	return retval;
 }
 
 /*-----------------------------------------------------------------------
@@ -632,152 +651,177 @@ static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
  * http://www.jedec.org/download/search/jesd68.pdf
  *
 */
-static int flash_detect_cfi(flash_info_t * info)
+static int flash_detect_cfi (flash_info_t * info)
 {
 
 #if 0
-    for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT;
-        info->portwidth <<= 1) {
-        for(info->chipwidth =FLASH_CFI_BY8;
-            info->chipwidth <= info->portwidth;
-            info->chipwidth <<= 1) {
-            flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
-            flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
-            if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') &&
-               flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
-               flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y'))
-                return 1;
-        }
-    }
+	for (info->portwidth = FLASH_CFI_8BIT;
+	     info->portwidth <= FLASH_CFI_32BIT; info->portwidth <<= 1) {
+		for (info->chipwidth = FLASH_CFI_BY8;
+		     info->chipwidth <= info->portwidth;
+		     info->chipwidth <<= 1) {
+			flash_write_cmd (info, 0, 0, FLASH_CMD_RESET);
+			flash_write_cmd (info, 0, FLASH_OFFSET_CFI,
+					 FLASH_CMD_CFI);
+			if (flash_isequal
+			    (info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
+			    && flash_isequal (info, 0,
+					      FLASH_OFFSET_CFI_RESP + 1, 'R')
+			    && flash_isequal (info, 0,
+					      FLASH_OFFSET_CFI_RESP + 2, 'Y'))
+				return 1;
+		}
+	}
 #endif
-    flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
-    flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
-    if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') &&
-       flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
-       flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
-        return 1;
-    } else {
-        return 0;
-    };
+	flash_write_cmd (info, 0, 0, FLASH_CMD_RESET);
+	flash_write_cmd (info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
+	if (flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP, 'Q') &&
+	    flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
+	    flash_isequal (info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
+		return 1;
+	} else {
+		return 0;
+	};
 }
+
 /*
  * The following code cannot be run from FLASH!
  *
  */
 static ulong flash_get_size (ulong base, int banknum)
 {
-    flash_info_t * info = &flash_info[banknum];
-    int i, j;
-    int sect_cnt;
-    unsigned long sector;
-    unsigned long tmp;
-    int size_ratio;
-    uchar num_erase_regions;
-    int  erase_region_size;
-    int  erase_region_count;
-
-    info->start[0] = base;
-
-    if(flash_detect_cfi(info)){
+	flash_info_t *info = &flash_info[banknum];
+	int i, j;
+	int sect_cnt;
+	unsigned long sector;
+	unsigned long tmp;
+	int size_ratio;
+	uchar num_erase_regions;
+	int erase_region_size;
+	int erase_region_count;
+
+	info->start[0] = base;
+
+	if (flash_detect_cfi (info)) {
 #ifdef DEBUG_FLASH
-        printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */
+		printf ("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth);	/* test-only */
 #endif
-        size_ratio = 1; // info->portwidth / info->chipwidth;
-        num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
+		size_ratio = 1;	/* info->portwidth / info->chipwidth; */
+		num_erase_regions =
+			flash_read_uchar (info,
+					  FLASH_OFFSET_NUM_ERASE_REGIONS);
 #ifdef DEBUG_FLASH
-        printf("found %d erase regions\n", num_erase_regions);
+		printf ("found %d erase regions\n", num_erase_regions);
 #endif
-        sect_cnt = 0;
-        sector = base;
-        for(i = 0 ; i < num_erase_regions; i++) {
-            if(i > NUM_ERASE_REGIONS) {
-                printf("%d erase regions found, only %d used\n",
-                       num_erase_regions, NUM_ERASE_REGIONS);
-                break;
-            }
-            tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS);
-            erase_region_count = (tmp & 0xffff) +1;
-            tmp >>= 16;
-            erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128;
-            for(j = 0; j< erase_region_count; j++) {
-                info->start[sect_cnt] = sector;
-                sector += (erase_region_size * size_ratio);
-                info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT);
-                sect_cnt++;
-            }
-        }
-
-        info->sector_count = sect_cnt;
-        /* multiply the size by the number of chips */
-        info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio;
-        info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
-        tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
-        info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
-        tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
-        info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
-        tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
-        info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000;
-        info->flash_id = FLASH_MAN_CFI;
-    }
-
-    flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
-    return(info->size);
+		sect_cnt = 0;
+		sector = base;
+		for (i = 0; i < num_erase_regions; i++) {
+			if (i > NUM_ERASE_REGIONS) {
+				printf ("%d erase regions found, only %d used\n", num_erase_regions, NUM_ERASE_REGIONS);
+				break;
+			}
+			tmp = flash_read_long (info, 0,
+					       FLASH_OFFSET_ERASE_REGIONS);
+			erase_region_count = (tmp & 0xffff) + 1;
+			tmp >>= 16;
+			erase_region_size =
+				(tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128;
+			for (j = 0; j < erase_region_count; j++) {
+				info->start[sect_cnt] = sector;
+				sector += (erase_region_size * size_ratio);
+				info->protect[sect_cnt] =
+					flash_isset (info, sect_cnt,
+						     FLASH_OFFSET_PROTECT,
+						     FLASH_STATUS_PROTECT);
+				sect_cnt++;
+			}
+		}
+
+		info->sector_count = sect_cnt;
+		/* multiply the size by the number of chips */
+		info->size =
+			(1 << flash_read_uchar (info, FLASH_OFFSET_SIZE)) *
+			size_ratio;
+		info->buffer_size =
+			(1 <<
+			 flash_read_ushort (info, 0,
+					    FLASH_OFFSET_BUFFER_SIZE));
+		tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_ETOUT);
+		info->erase_blk_tout =
+			(tmp *
+			 (1 <<
+			  flash_read_uchar (info, FLASH_OFFSET_EMAX_TOUT)));
+		tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WBTOUT);
+		info->buffer_write_tout =
+			(tmp *
+			 (1 <<
+			  flash_read_uchar (info, FLASH_OFFSET_WBMAX_TOUT)));
+		tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT);
+		info->write_tout =
+			(tmp *
+			 (1 <<
+			  flash_read_uchar (info,
+					    FLASH_OFFSET_WMAX_TOUT))) / 1000;
+		info->flash_id = FLASH_MAN_CFI;
+	}
+
+	flash_write_cmd (info, 0, 0, FLASH_CMD_RESET);
+	return (info->size);
 }
 
-
 /*-----------------------------------------------------------------------
  */
-static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
+static int flash_write_cfiword (flash_info_t * info, ulong dest,
+				cfiword_t cword)
 {
 
-    cfiptr_t ctladdr;
-    cfiptr_t cptr;
-    int flag;
-
-    ctladdr.cp = flash_make_addr(info, 0, 0);
-    cptr.cp = (uchar *)dest;
-
-
-    /* Check if Flash is (sufficiently) erased */
-    switch(info->portwidth) {
-    case FLASH_CFI_8BIT:
-        flag = ((cptr.cp[0] & cword.c) == cword.c);
-        break;
-    case FLASH_CFI_16BIT:
-        flag = ((cptr.wp[0] & cword.w) == cword.w);
-        break;
-    case FLASH_CFI_32BIT:
-        flag = ((cptr.lp[0] & cword.l)  == cword.l);
-        break;
-    default:
-        return 2;
-    }
-    if(!flag)
-        return 2;
-
-    /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
-
-    flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
-    flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
-
-    switch(info->portwidth) {
-    case FLASH_CFI_8BIT:
-        cptr.cp[0] = cword.c;
-        break;
-    case FLASH_CFI_16BIT:
-        cptr.wp[0] = cword.w;
-        break;
-    case FLASH_CFI_32BIT:
-        cptr.lp[0] = cword.l;
-        break;
-    }
-
-    /* re-enable interrupts if necessary */
-    if(flag)
-        enable_interrupts();
-
-    return flash_full_status_check(info, 0, info->write_tout, "write");
+	cfiptr_t ctladdr;
+	cfiptr_t cptr;
+	int flag;
+
+	ctladdr.cp = flash_make_addr (info, 0, 0);
+	cptr.cp = (uchar *) dest;
+
+	/* Check if Flash is (sufficiently) erased */
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		flag = ((cptr.cp[0] & cword.c) == cword.c);
+		break;
+	case FLASH_CFI_16BIT:
+		flag = ((cptr.wp[0] & cword.w) == cword.w);
+		break;
+	case FLASH_CFI_32BIT:
+		flag = ((cptr.lp[0] & cword.l) == cword.l);
+		break;
+	default:
+		return 2;
+	}
+	if (!flag)
+		return 2;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	flash_write_cmd (info, 0, 0, FLASH_CMD_CLEAR_STATUS);
+	flash_write_cmd (info, 0, 0, FLASH_CMD_WRITE);
+
+	switch (info->portwidth) {
+	case FLASH_CFI_8BIT:
+		cptr.cp[0] = cword.c;
+		break;
+	case FLASH_CFI_16BIT:
+		cptr.wp[0] = cword.w;
+		break;
+	case FLASH_CFI_32BIT:
+		cptr.lp[0] = cword.l;
+		break;
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+
+	return flash_full_status_check (info, 0, info->write_tout, "write");
 }
 
 #ifdef CFG_FLASH_USE_BUFFER_WRITE
@@ -786,68 +830,74 @@ static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
  * when the passed address is greater or equal to the sector address
  * we have a match
  */
-static int find_sector(flash_info_t *info, ulong addr)
+static int find_sector (flash_info_t * info, ulong addr)
 {
-    int sector;
-    for(sector = info->sector_count - 1; sector >= 0; sector--) {
-        if(addr >= info->start[sector])
-            break;
-    }
-    return sector;
+	int sector;
+
+	for (sector = info->sector_count - 1; sector >= 0; sector--) {
+		if (addr >= info->start[sector])
+			break;
+	}
+	return sector;
 }
 
-static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len)
+static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
+				  int len)
 {
 
-    int sector;
-    int cnt;
-    int retcode;
-    volatile cfiptr_t src;
-    volatile cfiptr_t dst;
-
-    src.cp = cp;
-    dst.cp = (uchar *)dest;
-    sector = find_sector(info, dest);
-    flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
-    flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
-    if((retcode = flash_status_check(info, sector, info->buffer_write_tout,
-                     "write to buffer")) == ERR_OK) {
-        switch(info->portwidth) {
-        case FLASH_CFI_8BIT:
-            cnt = len;
-            break;
-        case FLASH_CFI_16BIT:
-            cnt = len >> 1;
-            break;
-        case FLASH_CFI_32BIT:
-            cnt = len >> 2;
-            break;
-        default:
-            return ERR_INVAL;
-            break;
-        }
-        flash_write_cmd(info, sector, 0, (uchar)cnt-1);
-        while(cnt-- > 0) {
-            switch(info->portwidth) {
-            case FLASH_CFI_8BIT:
-                *dst.cp++ = *src.cp++;
-                break;
-            case FLASH_CFI_16BIT:
-                *dst.wp++ = *src.wp++;
-                break;
-            case FLASH_CFI_32BIT:
-                *dst.lp++ = *src.lp++;
-                break;
-            default:
-                return ERR_INVAL;
-                break;
-            }
-        }
-        flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM);
-        retcode = flash_full_status_check(info, sector, info->buffer_write_tout,
-                         "buffer write");
-    }
-    flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
-    return retcode;
+	int sector;
+	int cnt;
+	int retcode;
+	volatile cfiptr_t src;
+	volatile cfiptr_t dst;
+
+	src.cp = cp;
+	dst.cp = (uchar *) dest;
+	sector = find_sector (info, dest);
+	flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+	flash_write_cmd (info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
+	if ((retcode =
+	     flash_status_check (info, sector, info->buffer_write_tout,
+				 "write to buffer")) == ERR_OK) {
+		switch (info->portwidth) {
+		case FLASH_CFI_8BIT:
+			cnt = len;
+			break;
+		case FLASH_CFI_16BIT:
+			cnt = len >> 1;
+			break;
+		case FLASH_CFI_32BIT:
+			cnt = len >> 2;
+			break;
+		default:
+			return ERR_INVAL;
+			break;
+		}
+		flash_write_cmd (info, sector, 0, (uchar) cnt - 1);
+		while (cnt-- > 0) {
+			switch (info->portwidth) {
+			case FLASH_CFI_8BIT:
+				*dst.cp++ = *src.cp++;
+				break;
+			case FLASH_CFI_16BIT:
+				*dst.wp++ = *src.wp++;
+				break;
+			case FLASH_CFI_32BIT:
+				*dst.lp++ = *src.lp++;
+				break;
+			default:
+				return ERR_INVAL;
+				break;
+			}
+		}
+		flash_write_cmd (info, sector, 0,
+				 FLASH_CMD_WRITE_BUFFER_CONFIRM);
+		retcode =
+			flash_full_status_check (info, sector,
+						 info->buffer_write_tout,
+						 "buffer write");
+	}
+	flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+	return retcode;
 }
 #endif /* CFG_USE_FLASH_BUFFER_WRITE */
diff --git a/board/amirix/ap1000/init.S b/board/amirix/ap1000/init.S
index 8c3a357..3aaa5c2 100644
--- a/board/amirix/ap1000/init.S
+++ b/board/amirix/ap1000/init.S
@@ -25,10 +25,10 @@
 #include <asm/mmu.h>
 
 
-     	.globl	ext_bus_cntlr_init
+	.globl	ext_bus_cntlr_init
 ext_bus_cntlr_init:
-        blr
+	blr
 
-        .globl  sdram_init
+	.globl	sdram_init
 sdram_init:
-        blr
+	blr
diff --git a/board/amirix/ap1000/pci.c b/board/amirix/ap1000/pci.c
index 34cd587..a6436ac 100644
--- a/board/amirix/ap1000/pci.c
+++ b/board/amirix/ap1000/pci.c
@@ -30,105 +30,121 @@
 #define PCI_IO_82559ER_CSR_BASE     0x40000200
 
 /** AP1100 specific values */
-#define PSII_BASE                   0x30000000    /**< PowerSpan II dual bridge local bus register address */
-#define PSII_CONFIG_ADDR            0x30000290    /**< PowerSpan II Configuration Cycle Address configuration register */
-#define PSII_CONFIG_DATA            0x30000294    /**< PowerSpan II Configuration Cycle Data register. */
-#define PSII_CONFIG_DEST_PCI2       0x01000000    /**< PowerSpan II configuration cycle destination selection, set for PCI2 bus */
-#define PSII_PCI_MEM_BASE           0x30200000    /**< Local Bus address for start of PCI memory space on PCI2 bus. */
-#define PSII_PCI_MEM_SIZE           0x1BE00000    /**< PCI Memory space about 510 Meg. */
-#define AP1000_SYS_MEM_START        0x00000000    /**< System memory starts at 0. */
-#define AP1000_SYS_MEM_SIZE         0x08000000    /**< System memory is 128 Meg. */
+#define PSII_BASE                   0x30000000	  /**< PowerSpan II dual bridge local bus register address */
+#define PSII_CONFIG_ADDR            0x30000290	  /**< PowerSpan II Configuration Cycle Address configuration register */
+#define PSII_CONFIG_DATA            0x30000294	  /**< PowerSpan II Configuration Cycle Data register. */
+#define PSII_CONFIG_DEST_PCI2       0x01000000	  /**< PowerSpan II configuration cycle destination selection, set for PCI2 bus */
+#define PSII_PCI_MEM_BASE           0x30200000	  /**< Local Bus address for start of PCI memory space on PCI2 bus. */
+#define PSII_PCI_MEM_SIZE           0x1BE00000	  /**< PCI Memory space about 510 Meg. */
+#define AP1000_SYS_MEM_START        0x00000000	  /**< System memory starts at 0. */
+#define AP1000_SYS_MEM_SIZE         0x08000000	  /**< System memory is 128 Meg. */
 
 /* static int G_verbosity_level = 1; */
 #define G_verbosity_level 1
 
-void write1(unsigned long addr, unsigned char val) {
-    volatile unsigned char* p = (volatile unsigned char*)addr;
+void write1 (unsigned long addr, unsigned char val)
+{
+	volatile unsigned char *p = (volatile unsigned char *) addr;
 
-    if(G_verbosity_level > 1)
-        printf("write1: addr=%08x val=%02x\n", (unsigned int)addr, val);
-    *p = val;
-    asm("eieio");
+	if (G_verbosity_level > 1)
+		printf ("write1: addr=%08x val=%02x\n", (unsigned int) addr,
+			val);
+	*p = val;
+	asm ("eieio");
 }
 
-unsigned char read1(unsigned long addr) {
-    unsigned char val;
-    volatile unsigned char* p = (volatile unsigned char*)addr;
-
-    if(G_verbosity_level > 1)
-        printf("read1: addr=%08x ", (unsigned int)addr);
-    val = *p;
-    asm("eieio");
-    if(G_verbosity_level > 1)
-        printf("val=%08x\n", val);
-    return val;
+unsigned char read1 (unsigned long addr)
+{
+	unsigned char val;
+	volatile unsigned char *p = (volatile unsigned char *) addr;
+
+	if (G_verbosity_level > 1)
+		printf ("read1: addr=%08x ", (unsigned int) addr);
+	val = *p;
+	asm ("eieio");
+	if (G_verbosity_level > 1)
+		printf ("val=%08x\n", val);
+	return val;
 }
 
-void write2(unsigned long addr, unsigned short val) {
-    volatile unsigned short* p = (volatile unsigned short*)addr;
+void write2 (unsigned long addr, unsigned short val)
+{
+	volatile unsigned short *p = (volatile unsigned short *) addr;
 
-    if(G_verbosity_level > 1)
-        printf("write2: addr=%08x val=%04x -> *p=%04x\n", (unsigned int)addr, val,
-                ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8));
+	if (G_verbosity_level > 1)
+		printf ("write2: addr=%08x val=%04x -> *p=%04x\n",
+			(unsigned int) addr, val,
+			((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8));
 
-    *p = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
-    asm("eieio");
+	*p = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
+	asm ("eieio");
 }
 
-unsigned short read2(unsigned long addr) {
-    unsigned short val;
-    volatile unsigned short* p = (volatile unsigned short*)addr;
-
-    if(G_verbosity_level > 1)
-        printf("read2: addr=%08x ", (unsigned int)addr);
-    val = *p;
-    val = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
-    asm("eieio");
-    if(G_verbosity_level > 1)
-        printf("*p=%04x -> val=%04x\n",
-            ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8), val);
-    return val;
+unsigned short read2 (unsigned long addr)
+{
+	unsigned short val;
+	volatile unsigned short *p = (volatile unsigned short *) addr;
+
+	if (G_verbosity_level > 1)
+		printf ("read2: addr=%08x ", (unsigned int) addr);
+	val = *p;
+	val = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
+	asm ("eieio");
+	if (G_verbosity_level > 1)
+		printf ("*p=%04x -> val=%04x\n",
+			((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8), val);
+	return val;
 }
 
-void write4(unsigned long addr, unsigned long val) {
-    volatile unsigned long* p = (volatile unsigned long*)addr;
-
-    if(G_verbosity_level > 1)
-        printf("write4: addr=%08x val=%08x -> *p=%08x\n", (unsigned int)addr, (unsigned int)val,
-            (unsigned int)(((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
-            ((val & 0x00FF0000) >> 8)  | ((val & 0x0000FF00) << 8)));
-
-    *p = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
-         ((val & 0x00FF0000) >> 8)  | ((val & 0x0000FF00) << 8);
-    asm("eieio");
+void write4 (unsigned long addr, unsigned long val)
+{
+	volatile unsigned long *p = (volatile unsigned long *) addr;
+
+	if (G_verbosity_level > 1)
+		printf ("write4: addr=%08x val=%08x -> *p=%08x\n",
+			(unsigned int) addr, (unsigned int) val,
+			(unsigned int) (((val & 0xFF000000) >> 24) |
+					((val & 0x000000FF) << 24) |
+					((val & 0x00FF0000) >> 8) |
+					((val & 0x0000FF00) << 8)));
+
+	*p = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
+		((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8);
+	asm ("eieio");
 }
 
-unsigned long read4(unsigned long addr) {
-    unsigned long val;
-    volatile unsigned long* p = (volatile unsigned long*)addr;
-
-    if(G_verbosity_level > 1)
-        printf("read4: addr=%08x", (unsigned int)addr);
-
-    val = *p;
-    val = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
-          ((val & 0x00FF0000) >> 8)  | ((val & 0x0000FF00) << 8);
-    asm("eieio");
-
-    if(G_verbosity_level > 1)
-        printf("*p=%04x -> val=%04x\n",
-            (unsigned int)(((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
-            ((val & 0x00FF0000) >> 8)  | ((val & 0x0000FF00) << 8)), (unsigned int)val);
-    return val;
+unsigned long read4 (unsigned long addr)
+{
+	unsigned long val;
+	volatile unsigned long *p = (volatile unsigned long *) addr;
+
+	if (G_verbosity_level > 1)
+		printf ("read4: addr=%08x", (unsigned int) addr);
+
+	val = *p;
+	val = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
+		((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8);
+	asm ("eieio");
+
+	if (G_verbosity_level > 1)
+		printf ("*p=%04x -> val=%04x\n",
+			(unsigned int) (((val & 0xFF000000) >> 24) |
+					((val & 0x000000FF) << 24) |
+					((val & 0x00FF0000) >> 8) |
+					((val & 0x0000FF00) << 8)),
+			(unsigned int) val);
+	return val;
 }
 
-void write4be(unsigned long addr, unsigned long val) {
-    volatile unsigned long* p = (volatile unsigned long*)addr;
+void write4be (unsigned long addr, unsigned long val)
+{
+	volatile unsigned long *p = (volatile unsigned long *) addr;
 
-    if(G_verbosity_level > 1)
-        printf("write4: addr=%08x val=%08x\n", (unsigned int)addr, (unsigned int)val);
-    *p = val;
-    asm("eieio");
+	if (G_verbosity_level > 1)
+		printf ("write4: addr=%08x val=%08x\n", (unsigned int) addr,
+			(unsigned int) val);
+	*p = val;
+	asm ("eieio");
 }
 
 /** One byte configuration write on PSII.
@@ -140,21 +156,14 @@ void write4be(unsigned long addr, unsigned long val) {
  *  @param    val        Address of location for received byte.
  *  @return Always Zero.
  */
-static int psII_read_config_byte(
-                    struct    pci_controller *hose,
-                    pci_dev_t                dev,
-                    int                      reg,
-                    u8                       *val)
+static int psII_read_config_byte (struct pci_controller *hose,
+				  pci_dev_t dev, int reg, u8 * val)
 {
-    write4be(PSII_CONFIG_ADDR,
-            PSII_CONFIG_DEST_PCI2 |  /* Operate on PCI2 bus interface . */
-            (PCI_BUS(dev) << 16) |
-            (PCI_DEV(dev) << 11) |
-            (PCI_FUNC(dev) << 8) |
-            ((reg & 0xFF) & ~3));  /* Configuation cycle type 0 */
-
-    *val = read1(PSII_CONFIG_DATA+(reg&0x03));
-    return(0);
+	write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 |	/* Operate on PCI2 bus interface . */
+		  (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3));	/* Configuation cycle type 0 */
+
+	*val = read1 (PSII_CONFIG_DATA + (reg & 0x03));
+	return (0);
 }
 
 /** One byte configuration write on PSII.
@@ -166,22 +175,15 @@ static int psII_read_config_byte(
  *  @param    val        Output byte.
  *  @return Always Zero.
  */
-static int psII_write_config_byte(
-                  struct    pci_controller    *hose,
-                  pci_dev_t                    dev,
-                  int                        reg,
-                  u8                        val)
+static int psII_write_config_byte (struct pci_controller *hose,
+				   pci_dev_t dev, int reg, u8 val)
 {
-    write4be(PSII_CONFIG_ADDR,
-            PSII_CONFIG_DEST_PCI2 |  /* Operate on PCI2 bus interface . */
-            (PCI_BUS(dev) << 16) |
-            (PCI_DEV(dev) << 11) |
-            (PCI_FUNC(dev) << 8) |
-            ((reg & 0xFF) & ~3));  /* Configuation cycle type 0 */
+	write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 |	/* Operate on PCI2 bus interface . */
+		  (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3));	/* Configuation cycle type 0 */
 
-    write1(PSII_CONFIG_DATA+(reg&0x03),(unsigned char )val);
+	write1 (PSII_CONFIG_DATA + (reg & 0x03), (unsigned char) val);
 
-    return(0);
+	return (0);
 }
 
 /** One word (16 bit) configuration read on PSII.
@@ -193,21 +195,14 @@ static int psII_write_config_byte(
  *  @param    val        Address of location for received word.
  *  @return Always Zero.
  */
-static int psII_read_config_word(
-                    struct    pci_controller    *hose,
-                    pci_dev_t                dev,
-                    int                        reg,
-                    u16                        *val)
+static int psII_read_config_word (struct pci_controller *hose,
+				  pci_dev_t dev, int reg, u16 * val)
 {
-    write4be(PSII_CONFIG_ADDR,
-            PSII_CONFIG_DEST_PCI2 |  /* Operate on PCI2 bus interface . */
-            (PCI_BUS(dev) << 16) |
-            (PCI_DEV(dev) << 11) |
-            (PCI_FUNC(dev) << 8) |
-            ((reg & 0xFF) & ~3));  /* Configuation cycle type 0 */
-
-    *val = read2(PSII_CONFIG_DATA+(reg&0x03));
-    return(0);
+	write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 |	/* Operate on PCI2 bus interface . */
+		  (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3));	/* Configuation cycle type 0 */
+
+	*val = read2 (PSII_CONFIG_DATA + (reg & 0x03));
+	return (0);
 }
 
 /** One word (16 bit) configuration write on PSII.
@@ -219,22 +214,15 @@ static int psII_read_config_word(
  *  @param    val        Output word.
  *  @return Always Zero.
  */
-static int psII_write_config_word(
-                  struct    pci_controller    *hose,
-                  pci_dev_t                    dev,
-                  int                        reg,
-                  u16                        val)
+static int psII_write_config_word (struct pci_controller *hose,
+				   pci_dev_t dev, int reg, u16 val)
 {
-    write4be(PSII_CONFIG_ADDR,
-            PSII_CONFIG_DEST_PCI2 |  /* Operate on PCI2 bus interface . */
-            (PCI_BUS(dev) << 16) |
-            (PCI_DEV(dev) << 11) |
-            (PCI_FUNC(dev) << 8) |
-            ((reg & 0xFF) & ~3));  /* Configuation cycle type 0 */
+	write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 |	/* Operate on PCI2 bus interface . */
+		  (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3));	/* Configuation cycle type 0 */
 
-    write2(PSII_CONFIG_DATA+(reg&0x03),(unsigned short )val);
+	write2 (PSII_CONFIG_DATA + (reg & 0x03), (unsigned short) val);
 
-    return(0);
+	return (0);
 }
 
 /** One DWord (32 bit) configuration read on PSII.
@@ -246,21 +234,14 @@ static int psII_write_config_word(
  *  @param    val        Address of location for received byte.
  *  @return Always Zero.
  */
-static int psII_read_config_dword(
-                    struct    pci_controller    *hose,
-                    pci_dev_t                dev,
-                    int                        reg,
-                    u32                        *val)
+static int psII_read_config_dword (struct pci_controller *hose,
+				   pci_dev_t dev, int reg, u32 * val)
 {
-    write4be(PSII_CONFIG_ADDR,
-            PSII_CONFIG_DEST_PCI2 |  /* Operate on PCI2 bus interface . */
-            (PCI_BUS(dev) << 16) |
-            (PCI_DEV(dev) << 11) |
-            (PCI_FUNC(dev) << 8) |
-            ((reg & 0xFF) & ~3));  /* Configuation cycle type 0 */
-
-    *val = read4(PSII_CONFIG_DATA);
-    return(0);
+	write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 |	/* Operate on PCI2 bus interface . */
+		  (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3));	/* Configuation cycle type 0 */
+
+	*val = read4 (PSII_CONFIG_DATA);
+	return (0);
 }
 
 /** One DWord (32 bit) configuration write on PSII.
@@ -272,75 +253,66 @@ static int psII_read_config_dword(
  *  @param    val        Output Dword.
  *  @return Always Zero.
  */
-static int psII_write_config_dword(
-                  struct    pci_controller    *hose,
-                  pci_dev_t                    dev,
-                  int                        reg,
-                  u32                        val)
+static int psII_write_config_dword (struct pci_controller *hose,
+				    pci_dev_t dev, int reg, u32 val)
 {
-    write4be(PSII_CONFIG_ADDR,
-            PSII_CONFIG_DEST_PCI2 |  /* Operate on PCI2 bus interface . */
-            (PCI_BUS(dev) << 16) |
-            (PCI_DEV(dev) << 11) |
-            (PCI_FUNC(dev) << 8) |
-            ((reg & 0xFF) & ~3));  /* Configuation cycle type 0 */
+	write4be (PSII_CONFIG_ADDR, PSII_CONFIG_DEST_PCI2 |	/* Operate on PCI2 bus interface . */
+		  (PCI_BUS (dev) << 16) | (PCI_DEV (dev) << 11) | (PCI_FUNC (dev) << 8) | ((reg & 0xFF) & ~3));	/* Configuation cycle type 0 */
 
-    write4(PSII_CONFIG_DATA,(unsigned long)val);
+	write4 (PSII_CONFIG_DATA, (unsigned long) val);
 
-    return(0);
+	return (0);
 }
 
-
-
-static struct pci_config_table    ap1000_config_table[] = {
+static struct pci_config_table ap1000_config_table[] = {
 #ifdef CONFIG_AP1000
-    {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-    PCI_BUS(CFG_ETH_DEV_FN), PCI_DEV(CFG_ETH_DEV_FN), PCI_FUNC(CFG_ETH_DEV_FN),
-    pci_cfgfunc_config_device, 
-    {CFG_ETH_IOBASE, CFG_ETH_MEMBASE, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	 PCI_BUS (CFG_ETH_DEV_FN), PCI_DEV (CFG_ETH_DEV_FN),
+	 PCI_FUNC (CFG_ETH_DEV_FN),
+	 pci_cfgfunc_config_device,
+	 {CFG_ETH_IOBASE, CFG_ETH_MEMBASE,
+	  PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
 #endif
-    { }
+	{}
 };
 
-
 static struct pci_controller psII_hose = {
-    config_table: ap1000_config_table,
+      config_table:ap1000_config_table,
 };
 
-void pci_init_board(void)
+void pci_init_board (void)
 {
-  struct pci_controller *hose = &psII_hose;
-
-  /*
-   * Register the hose
-   */
-  hose->first_busno = 0;
-  hose->last_busno = 0xff;
+	struct pci_controller *hose = &psII_hose;
 
+	/*
+	 * Register the hose
+	 */
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
 
-  /* System memory space */
-  pci_set_region(hose->regions + 0,
-         AP1000_SYS_MEM_START, AP1000_SYS_MEM_START, AP1000_SYS_MEM_SIZE,
-         PCI_REGION_MEM | PCI_REGION_MEMORY);
+	/* System memory space */
+	pci_set_region (hose->regions + 0,
+			AP1000_SYS_MEM_START, AP1000_SYS_MEM_START,
+			AP1000_SYS_MEM_SIZE,
+			PCI_REGION_MEM | PCI_REGION_MEMORY);
 
-  /* PCI Memory space */
-  pci_set_region(hose->regions + 1,
-         PSII_PCI_MEM_BASE, PSII_PCI_MEM_BASE, PSII_PCI_MEM_SIZE,
-         PCI_REGION_MEM);
+	/* PCI Memory space */
+	pci_set_region (hose->regions + 1,
+			PSII_PCI_MEM_BASE, PSII_PCI_MEM_BASE,
+			PSII_PCI_MEM_SIZE, PCI_REGION_MEM);
 
-  /* No IO Memory space  - for now */
+	/* No IO Memory space  - for now */
 
-  pci_set_ops(hose,
-          psII_read_config_byte,
-          psII_read_config_word,
-          psII_read_config_dword,
-          psII_write_config_byte,
-          psII_write_config_word,
-          psII_write_config_dword);
+	pci_set_ops (hose,
+		     psII_read_config_byte,
+		     psII_read_config_word,
+		     psII_read_config_dword,
+		     psII_write_config_byte,
+		     psII_write_config_word, psII_write_config_dword);
 
-  hose->region_count = 2;
+	hose->region_count = 2;
 
-  pci_register_hose(hose);
+	pci_register_hose (hose);
 
-  hose->last_busno = pci_hose_scan(hose);
+	hose->last_busno = pci_hose_scan (hose);
 }
diff --git a/board/amirix/ap1000/powerspan.c b/board/amirix/ap1000/powerspan.c
index fe395cc..f048155 100644
--- a/board/amirix/ap1000/powerspan.c
+++ b/board/amirix/ap1000/powerspan.c
@@ -38,467 +38,492 @@
   * @param  addr [IN] the address to write to
   * @param  val  [IN] the value to write
   */
-void write1(unsigned long addr, unsigned char val) {
-    volatile unsigned char* p = (volatile unsigned char*)addr;
+void write1 (unsigned long addr, unsigned char val)
+{
+	volatile unsigned char *p = (volatile unsigned char *) addr;
+
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("write1: addr=%08x val=%02x\n", addr, val);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("write1: addr=%08x val=%02x\n", addr, val);
+	}
 #endif
-    *p = val;
-    PSII_SYNC();
+	*p = val;
+	PSII_SYNC ();
 }
 
 /** Read one byte with byte swapping.
   * @param  addr  [IN] the address to read from
   * @return the value at addr
   */
-unsigned char read1(unsigned long addr) {
-    unsigned char val;
-    volatile unsigned char* p = (volatile unsigned char*)addr;
+unsigned char read1 (unsigned long addr)
+{
+	unsigned char val;
+	volatile unsigned char *p = (volatile unsigned char *) addr;
 
-    val = *p;
-    PSII_SYNC();
+	val = *p;
+	PSII_SYNC ();
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("read1: addr=%08x val=%02x\n", addr, val);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("read1: addr=%08x val=%02x\n", addr, val);
+	}
 #endif
-    return val;
+	return val;
 }
 
 /** Write one 2-byte word with byte swapping.
   * @param  addr  [IN] the address to write to
   * @param  val   [IN] the value to write
   */
-void write2(unsigned long addr, unsigned short val) {
-    volatile unsigned short* p = (volatile unsigned short*)addr;
+void write2 (unsigned long addr, unsigned short val)
+{
+	volatile unsigned short *p = (volatile unsigned short *) addr;
 
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("write2: addr=%08x val=%04x -> *p=%04x\n", addr, val,
-                ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8));
-        }
+	if (gVerbosityLevel > 1) {
+		printf ("write2: addr=%08x val=%04x -> *p=%04x\n", addr, val,
+			((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8));
+	}
 #endif
-    *p = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
-    PSII_SYNC();
+	*p = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
+	PSII_SYNC ();
 }
 
 /** Read one 2-byte word with byte swapping.
   * @param  addr  [IN] the address to read from
   * @return the value at addr
   */
-unsigned short read2(unsigned long addr) {
-    unsigned short val;
-    volatile unsigned short* p = (volatile unsigned short*)addr;
-
-    val = *p;
-    val = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
-    PSII_SYNC();
+unsigned short read2 (unsigned long addr)
+{
+	unsigned short val;
+	volatile unsigned short *p = (volatile unsigned short *) addr;
+
+	val = *p;
+	val = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
+	PSII_SYNC ();
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("read2: addr=%08x *p=%04x -> val=%04x\n", addr, *p, val);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("read2: addr=%08x *p=%04x -> val=%04x\n", addr, *p,
+			val);
+	}
 #endif
-    return val;
+	return val;
 }
 
 /** Write one 4-byte word with byte swapping.
   * @param  addr  [IN] the address to write to
   * @param  val   [IN] the value to write
   */
-void write4(unsigned long addr, unsigned long val) {
-    volatile unsigned long* p = (volatile unsigned long*)addr;
+void write4 (unsigned long addr, unsigned long val)
+{
+	volatile unsigned long *p = (volatile unsigned long *) addr;
+
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("write4: addr=%08x val=%08x -> *p=%08x\n", addr, val,
-            ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
-            ((val & 0x00FF0000) >> 8)  | ((val & 0x0000FF00) << 8));
-        }
+	if (gVerbosityLevel > 1) {
+		printf ("write4: addr=%08x val=%08x -> *p=%08x\n", addr, val,
+			((val & 0xFF000000) >> 24) |
+			((val & 0x000000FF) << 24) |
+			((val & 0x00FF0000) >>  8) |
+			((val & 0x0000FF00) <<  8));
+	}
 #endif
-    *p = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
-         ((val & 0x00FF0000) >> 8)  | ((val & 0x0000FF00) << 8);
-    PSII_SYNC();
+	*p = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
+		((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8);
+	PSII_SYNC ();
 }
 
 /** Read one 4-byte word with byte swapping.
   * @param  addr  [IN] the address to read from
   * @return the value at addr
   */
-unsigned long read4(unsigned long addr) {
-    unsigned long val;
-    volatile unsigned long* p = (volatile unsigned long*)addr;
-
-    val = *p;
-    val = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
-          ((val & 0x00FF0000) >> 8)  | ((val & 0x0000FF00) << 8);
-    PSII_SYNC();
+unsigned long read4 (unsigned long addr)
+{
+	unsigned long val;
+	volatile unsigned long *p = (volatile unsigned long *) addr;
+
+	val = *p;
+	val = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
+		((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8);
+	PSII_SYNC ();
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("read4: addr=%08x *p=%08x -> val=%08x\n", addr, *p, val);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("read4: addr=%08x *p=%08x -> val=%08x\n", addr, *p,
+			val);
+	}
 #endif
-    return val;
+	return val;
 }
 
-int PCIReadConfig(int bus, int dev, int fn, int reg, int width, unsigned long* val){
-    unsigned int conAdrVal;
-    unsigned int conDataReg = REG_CONFIG_DATA;
-    unsigned int status;
-    int ret_val = 0;
-
-
-    /* DEST bit hardcoded to 1: local pci is PCI-2 */
-    /* TYPE bit is hardcoded to 1: all config cycles are local */
-    conAdrVal = (1 << 24)
-              | ((bus & 0xFF) << 16)
-              | ((dev & 0xFF) << 11)
-              | ((fn & 0x07)  <<  8)
-              | (reg & 0xFC);
-
-    /* clear any pending master aborts */
-    write4(REG_P1_CSR, CLEAR_MASTER_ABORT);
-
-    /* Load the conAdrVal value first, then read from pb_conf_data */
-    write4(REG_CONFIG_ADDRESS, conAdrVal);
-    PSII_SYNC();
-
-
-    /* Note: documentation does not match the pspan library code */
-    /* Note: *pData comes back as -1 if device is not present */
-    switch (width){
-        case 4:{
-          *(unsigned int*)val = read4(conDataReg);
-          break;
-        }
-        case 2:{
-          *(unsigned short*)val = read2(conDataReg);
-          break;
-        }
-        case 1:{
-          *(unsigned char*)val = read1(conDataReg);
-          break;
-        }
-        default:{
-          ret_val = ILLEGAL_REG_OFFSET;
-          break;
-        }
-    }
-    PSII_SYNC();
-
-    /* clear any pending master aborts */
-    status = read4(REG_P1_CSR);
-    if(status & CLEAR_MASTER_ABORT){
-        ret_val = NO_DEVICE_FOUND;
-        write4(REG_P1_CSR, CLEAR_MASTER_ABORT);
-    }
-
-    return ret_val;
+int PCIReadConfig (int bus, int dev, int fn, int reg, int width,
+		   unsigned long *val)
+{
+	unsigned int conAdrVal;
+	unsigned int conDataReg = REG_CONFIG_DATA;
+	unsigned int status;
+	int ret_val = 0;
+
+
+	/* DEST bit hardcoded to 1: local pci is PCI-2 */
+	/* TYPE bit is hardcoded to 1: all config cycles are local */
+	conAdrVal = (1 << 24)
+		| ((bus & 0xFF) << 16)
+		| ((dev & 0xFF) << 11)
+		| ((fn & 0x07) << 8)
+		| (reg & 0xFC);
+
+	/* clear any pending master aborts */
+	write4 (REG_P1_CSR, CLEAR_MASTER_ABORT);
+
+	/* Load the conAdrVal value first, then read from pb_conf_data */
+	write4 (REG_CONFIG_ADDRESS, conAdrVal);
+	PSII_SYNC ();
+
+
+	/* Note: documentation does not match the pspan library code */
+	/* Note: *pData comes back as -1 if device is not present */
+	switch (width) {
+	case 4:
+		*(unsigned int *) val = read4 (conDataReg);
+		break;
+	case 2:
+		*(unsigned short *) val = read2 (conDataReg);
+		break;
+	case 1:
+		*(unsigned char *) val = read1 (conDataReg);
+		break;
+	default:
+		ret_val = ILLEGAL_REG_OFFSET;
+		break;
+	}
+	PSII_SYNC ();
+
+	/* clear any pending master aborts */
+	status = read4 (REG_P1_CSR);
+	if (status & CLEAR_MASTER_ABORT) {
+		ret_val = NO_DEVICE_FOUND;
+		write4 (REG_P1_CSR, CLEAR_MASTER_ABORT);
+	}
+
+	return ret_val;
 }
 
 
-int PCIWriteConfig(int bus, int dev, int fn, int reg, int width, unsigned long val){
-    unsigned int conAdrVal;
-    unsigned int conDataReg = REG_CONFIG_DATA;
-    unsigned int status;
-    int ret_val = 0;
-
-
-    /* DEST bit hardcoded to 1: local pci is PCI-2 */
-    /* TYPE bit is hardcoded to 1: all config cycles are local */
-    conAdrVal = (1 << 24)
-              | ((bus & 0xFF) << 16)
-              | ((dev & 0xFF) << 11)
-              | ((fn & 0x07)  <<  8)
-              | (reg & 0xFC);
-
-    /* clear any pending master aborts */
-    write4(REG_P1_CSR, CLEAR_MASTER_ABORT);
-
-    /* Load the conAdrVal value first, then read from pb_conf_data */
-    write4(REG_CONFIG_ADDRESS, conAdrVal);
-    PSII_SYNC();
-
-
-    /* Note: documentation does not match the pspan library code */
-    /* Note: *pData comes back as -1 if device is not present */
-    switch (width){
-        case 4:{
-          write4(conDataReg, val);
-          break;
-        }
-        case 2:{
-          write2(conDataReg, val);
-          break;
-        }
-        case 1:{
-          write1(conDataReg, val);
-          break;
-        }
-        default:{
-          ret_val = ILLEGAL_REG_OFFSET;
-          break;
-        }
-    }
-    PSII_SYNC();
-
-    /* clear any pending master aborts */
-    status = read4(REG_P1_CSR);
-    if(status & CLEAR_MASTER_ABORT){
-        ret_val = NO_DEVICE_FOUND;
-        write4(REG_P1_CSR, CLEAR_MASTER_ABORT);
-    }
-
-    return ret_val;
+int PCIWriteConfig (int bus, int dev, int fn, int reg, int width,
+		    unsigned long val)
+{
+	unsigned int conAdrVal;
+	unsigned int conDataReg = REG_CONFIG_DATA;
+	unsigned int status;
+	int ret_val = 0;
+
+
+	/* DEST bit hardcoded to 1: local pci is PCI-2 */
+	/* TYPE bit is hardcoded to 1: all config cycles are local */
+	conAdrVal = (1 << 24)
+		| ((bus & 0xFF) << 16)
+		| ((dev & 0xFF) << 11)
+		| ((fn & 0x07) << 8)
+		| (reg & 0xFC);
+
+	/* clear any pending master aborts */
+	write4 (REG_P1_CSR, CLEAR_MASTER_ABORT);
+
+	/* Load the conAdrVal value first, then read from pb_conf_data */
+	write4 (REG_CONFIG_ADDRESS, conAdrVal);
+	PSII_SYNC ();
+
+
+	/* Note: documentation does not match the pspan library code */
+	/* Note: *pData comes back as -1 if device is not present */
+	switch (width) {
+	case 4:
+		write4 (conDataReg, val);
+		break;
+	case 2:
+		write2 (conDataReg, val);
+		break;
+	case 1:
+		write1 (conDataReg, val);
+		break;
+	default:
+		ret_val = ILLEGAL_REG_OFFSET;
+		break;
+	}
+	PSII_SYNC ();
+
+	/* clear any pending master aborts */
+	status = read4 (REG_P1_CSR);
+	if (status & CLEAR_MASTER_ABORT) {
+		ret_val = NO_DEVICE_FOUND;
+		write4 (REG_P1_CSR, CLEAR_MASTER_ABORT);
+	}
+
+	return ret_val;
 }
 
 
-int pci_read_config_byte(int bus, int dev, int fn, int reg, unsigned char* val){
-    unsigned long read_val;
-    int ret_val;
+int pci_read_config_byte (int bus, int dev, int fn, int reg,
+			  unsigned char *val)
+{
+	unsigned long read_val;
+	int ret_val;
 
-    ret_val = PCIReadConfig(bus, dev, fn, reg, 1, &read_val);
-    *val = read_val & 0xFF;
+	ret_val = PCIReadConfig (bus, dev, fn, reg, 1, &read_val);
+	*val = read_val & 0xFF;
 
-    return ret_val;
+	return ret_val;
 }
 
-int pci_write_config_byte(int bus, int dev, int fn, int reg, unsigned char val){
-    return PCIWriteConfig(bus, dev, fn, reg, 1, val);
+int pci_write_config_byte (int bus, int dev, int fn, int reg,
+			   unsigned char val)
+{
+	return PCIWriteConfig (bus, dev, fn, reg, 1, val);
 }
 
-int pci_read_config_word(int bus, int dev, int fn, int reg, unsigned short* val){
-    unsigned long read_val;
-    int ret_val;
+int pci_read_config_word (int bus, int dev, int fn, int reg,
+			  unsigned short *val)
+{
+	unsigned long read_val;
+	int ret_val;
 
-    ret_val = PCIReadConfig(bus, dev, fn, reg, 2, &read_val);
-    *val = read_val & 0xFFFF;
+	ret_val = PCIReadConfig (bus, dev, fn, reg, 2, &read_val);
+	*val = read_val & 0xFFFF;
 
-    return ret_val;
+	return ret_val;
 }
 
-int pci_write_config_word(int bus, int dev, int fn, int reg, unsigned short val){
-    return PCIWriteConfig(bus, dev, fn, reg, 2, val);
+int pci_write_config_word (int bus, int dev, int fn, int reg,
+			   unsigned short val)
+{
+	return PCIWriteConfig (bus, dev, fn, reg, 2, val);
 }
 
-int pci_read_config_dword(int bus, int dev, int fn, int reg, unsigned long* val){
-    return PCIReadConfig(bus, dev, fn, reg, 4, val);
+int pci_read_config_dword (int bus, int dev, int fn, int reg,
+			   unsigned long *val)
+{
+	return PCIReadConfig (bus, dev, fn, reg, 4, val);
 }
 
-int pci_write_config_dword(int bus, int dev, int fn, int reg, unsigned long val){
-    return PCIWriteConfig(bus, dev, fn, reg, 4, val);
+int pci_write_config_dword (int bus, int dev, int fn, int reg,
+			    unsigned long val)
+{
+	return PCIWriteConfig (bus, dev, fn, reg, 4, val);
 }
 
 #endif /* INCLUDE_PCI */
 
-int I2CAccess(unsigned char theI2CAddress, unsigned char theDevCode, unsigned char theChipSel, unsigned char* theValue, int RWFlag){
-    int ret_val = 0;
-    unsigned int reg_value;
-
-    reg_value = PowerSpanRead(REG_I2C_CSR);
-
-    if(reg_value & I2C_CSR_ACT){
-        printf("Error: I2C busy\n");
-        ret_val = I2C_BUSY;
-    }
-    else{
-        reg_value = ((theI2CAddress & 0xFF) << 24)
-                  | ((theDevCode & 0x0F) << 12)
-                  | ((theChipSel & 0x07) << 9)
-                  | I2C_CSR_ERR;
-        if(RWFlag == I2C_WRITE){
-            reg_value |= I2C_CSR_RW | ((*theValue & 0xFF) << 16);
-        }
-
-        PowerSpanWrite(REG_I2C_CSR, reg_value);
-        udelay(1);
-
-        do{
-            reg_value = PowerSpanRead(REG_I2C_CSR);
-
-            if((reg_value & I2C_CSR_ACT) == 0){
-                if(reg_value & I2C_CSR_ERR){
-                    ret_val = I2C_ERR;
-                }
-                else{
-                    *theValue = (reg_value & I2C_CSR_DATA) >> 16;
-                }
-            }
-        } while(reg_value & I2C_CSR_ACT);
-    }
-
-    return ret_val;
+int I2CAccess (unsigned char theI2CAddress, unsigned char theDevCode,
+	       unsigned char theChipSel, unsigned char *theValue, int RWFlag)
+{
+	int ret_val = 0;
+	unsigned int reg_value;
+
+	reg_value = PowerSpanRead (REG_I2C_CSR);
+
+	if (reg_value & I2C_CSR_ACT) {
+		printf ("Error: I2C busy\n");
+		ret_val = I2C_BUSY;
+	} else {
+		reg_value = ((theI2CAddress & 0xFF) << 24)
+			| ((theDevCode & 0x0F) << 12)
+			| ((theChipSel & 0x07) << 9)
+			| I2C_CSR_ERR;
+		if (RWFlag == I2C_WRITE) {
+			reg_value |= I2C_CSR_RW | ((*theValue & 0xFF) << 16);
+		}
+
+		PowerSpanWrite (REG_I2C_CSR, reg_value);
+		udelay (1);
+
+		do {
+			reg_value = PowerSpanRead (REG_I2C_CSR);
+
+			if ((reg_value & I2C_CSR_ACT) == 0) {
+				if (reg_value & I2C_CSR_ERR) {
+					ret_val = I2C_ERR;
+				} else {
+					*theValue =
+						(reg_value & I2C_CSR_DATA) >>
+						16;
+				}
+			}
+		} while (reg_value & I2C_CSR_ACT);
+	}
+
+	return ret_val;
 }
 
-int EEPROMRead(unsigned char theI2CAddress, unsigned char* theValue){
-    return I2CAccess(theI2CAddress, I2C_EEPROM_DEV, I2C_EEPROM_CHIP_SEL, theValue, I2C_READ);
+int EEPROMRead (unsigned char theI2CAddress, unsigned char *theValue)
+{
+	return I2CAccess (theI2CAddress, I2C_EEPROM_DEV, I2C_EEPROM_CHIP_SEL,
+			  theValue, I2C_READ);
 }
 
-int EEPROMWrite(unsigned char theI2CAddress, unsigned char theValue){
-    return I2CAccess(theI2CAddress, I2C_EEPROM_DEV, I2C_EEPROM_CHIP_SEL, &theValue, I2C_WRITE);
+int EEPROMWrite (unsigned char theI2CAddress, unsigned char theValue)
+{
+	return I2CAccess (theI2CAddress, I2C_EEPROM_DEV, I2C_EEPROM_CHIP_SEL,
+			  &theValue, I2C_WRITE);
 }
 
-int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){
-    char cmd;
-    int ret_val = 0;
-    unsigned int address = 0;
-    unsigned char value = 1;
-    unsigned char read_value;
-    int ii;
-    int error = 0;
-    unsigned char* mem_ptr;
-    unsigned char default_eeprom[] = EEPROM_DEFAULT;
-
-    if(argc < 2){
-        goto usage;
-    }
-
-    cmd = argv[1][0];
-    if(argc > 2){
-        address = simple_strtoul(argv[2], NULL, 16);
-        if(argc > 3){
-            value = simple_strtoul(argv[3], NULL, 16) & 0xFF;
-        }
-    }
-
-    switch (cmd){
-        case 'r':{
-            if(address > 256){
-                printf("Illegal Address\n");
-                goto usage;
-            }
-            printf("@0x%x: ", address);
-            for(ii = 0;ii < value;ii++){
-                if(EEPROMRead(address + ii, &read_value) != 0){
-                    printf("Read Error\n");
-                }
-                else{
-                    printf("0x%02x ", read_value);
-                }
-
-                if(((ii + 1) % 16) == 0){
-                    printf("\n");
-                }
-            }
-            printf("\n");
-            break;
-        }
-        case 'w':{
-            if(address > 256){
-                printf("Illegal Address\n");
-                goto usage;
-            }
-            if(argc < 4){
-                goto usage;
-            }
-            if(EEPROMWrite(address, value) != 0){
-                printf("Write Error\n");
-            }
-            break;
-        }
-        case 'g':{
-            if(argc != 3){
-                goto usage;
-            }
-            mem_ptr = (unsigned char*)address;
-            for(ii = 0;((ii < EEPROM_LENGTH) && (error == 0));ii++){
-                if(EEPROMRead(ii, &read_value) != 0){
-                    printf("Read Error\n");
-                    error = 1;
-                }
-                else{
-                    *mem_ptr = read_value;
-                    mem_ptr++;
-                }
-            }
-            break;
-        }
-        case 'p':{
-            if(argc != 3){
-                goto usage;
-            }
-            mem_ptr = (unsigned char*)address;
-            for(ii = 0;((ii < EEPROM_LENGTH) && (error == 0));ii++){
-                if(EEPROMWrite(ii, *mem_ptr) != 0){
-                    printf("Write Error\n");
-                    error = 1;
-                }
-
-                mem_ptr++;
-            }
-            break;
-        }
-        case 'd':{
-            if(argc != 2){
-                goto usage;
-            }
-            for(ii = 0;((ii < EEPROM_LENGTH) && (error == 0));ii++){
-                if(EEPROMWrite(ii, default_eeprom[ii]) != 0){
-                    printf("Write Error\n");
-                    error = 1;
-                }
-            }
-            break;
-        }
-        default:{
-            goto usage;
-        }
-    }
-
-    goto done;
- usage:
-    printf ("Usage:\n%s\n", cmdtp->help);
-
- done:
-     return ret_val;
+int do_eeprom (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	char cmd;
+	int ret_val = 0;
+	unsigned int address = 0;
+	unsigned char value = 1;
+	unsigned char read_value;
+	int ii;
+	int error = 0;
+	unsigned char *mem_ptr;
+	unsigned char default_eeprom[] = EEPROM_DEFAULT;
+
+	if (argc < 2) {
+		goto usage;
+	}
+
+	cmd = argv[1][0];
+	if (argc > 2) {
+		address = simple_strtoul (argv[2], NULL, 16);
+		if (argc > 3) {
+			value = simple_strtoul (argv[3], NULL, 16) & 0xFF;
+		}
+	}
+
+	switch (cmd) {
+	case 'r':
+		if (address > 256) {
+			printf ("Illegal Address\n");
+			goto usage;
+		}
+		printf ("@0x%x: ", address);
+		for (ii = 0; ii < value; ii++) {
+			if (EEPROMRead (address + ii, &read_value) !=
+			    0) {
+				printf ("Read Error\n");
+			} else {
+				printf ("0x%02x ", read_value);
+			}
+
+			if (((ii + 1) % 16) == 0) {
+				printf ("\n");
+			}
+		}
+		printf ("\n");
+		break;
+	case 'w':
+		if (address > 256) {
+			printf ("Illegal Address\n");
+			goto usage;
+		}
+		if (argc < 4) {
+			goto usage;
+		}
+		if (EEPROMWrite (address, value) != 0) {
+			printf ("Write Error\n");
+		}
+		break;
+	case 'g':
+		if (argc != 3) {
+			goto usage;
+		}
+		mem_ptr = (unsigned char *) address;
+		for (ii = 0; ((ii < EEPROM_LENGTH) && (error == 0));
+		     ii++) {
+			if (EEPROMRead (ii, &read_value) != 0) {
+				printf ("Read Error\n");
+				error = 1;
+			} else {
+				*mem_ptr = read_value;
+				mem_ptr++;
+			}
+		}
+		break;
+	case 'p':
+		if (argc != 3) {
+			goto usage;
+		}
+		mem_ptr = (unsigned char *) address;
+		for (ii = 0; ((ii < EEPROM_LENGTH) && (error == 0));
+		     ii++) {
+			if (EEPROMWrite (ii, *mem_ptr) != 0) {
+				printf ("Write Error\n");
+				error = 1;
+			}
+
+			mem_ptr++;
+		}
+		break;
+	case 'd':
+		if (argc != 2) {
+			goto usage;
+		}
+		for (ii = 0; ((ii < EEPROM_LENGTH) && (error == 0));
+		     ii++) {
+			if (EEPROMWrite (ii, default_eeprom[ii]) != 0) {
+				printf ("Write Error\n");
+				error = 1;
+			}
+		}
+		break;
+	default:
+		goto usage;
+	}
+
+	goto done;
+      usage:
+	printf ("Usage:\n%s\n", cmdtp->help);
+
+      done:
+	return ret_val;
 
 }
 
-U_BOOT_CMD(
-    eeprom,    4,    0,    do_eeprom,
-    "eeprom  - read/write/copy to/from the PowerSpan II eeprom\n",
-    "eeprom r OFF [NUM]\n"
-    "    - read NUM words starting at OFF\n"
-    "eeprom w OFF VAL\n"
-    "    - write word VAL at offset OFF\n"
-    "eeprom g ADD\n"
-    "    - store contents of eeprom at address ADD\n"
-    "eeprom p ADD\n"
-    "    - put data stored at address ADD into the eeprom\n"
-    "eeprom d\n"
-    "    - return eeprom to default contents\n"
-);
-
-unsigned int PowerSpanRead(unsigned int theOffset){
-    volatile unsigned int* ptr = (volatile unsigned int*)(PSPAN_BASEADDR + theOffset);
-    unsigned int ret_val;
+U_BOOT_CMD (eeprom, 4, 0, do_eeprom,
+	    "eeprom  - read/write/copy to/from the PowerSpan II eeprom\n",
+	    "eeprom r OFF [NUM]\n"
+	    "    - read NUM words starting at OFF\n"
+	    "eeprom w OFF VAL\n"
+	    "    - write word VAL at offset OFF\n"
+	    "eeprom g ADD\n"
+	    "    - store contents of eeprom at address ADD\n"
+	    "eeprom p ADD\n"
+	    "    - put data stored at address ADD into the eeprom\n"
+	    "eeprom d\n" "    - return eeprom to default contents\n");
+
+unsigned int PowerSpanRead (unsigned int theOffset)
+{
+	volatile unsigned int *ptr =
+		(volatile unsigned int *) (PSPAN_BASEADDR + theOffset);
+	unsigned int ret_val;
 
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("PowerSpanRead: offset=%08x ", theOffset);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("PowerSpanRead: offset=%08x ", theOffset);
+	}
 #endif
-    ret_val = *ptr;
-    PSII_SYNC();
+	ret_val = *ptr;
+	PSII_SYNC ();
 
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("value=%08x\n", ret_val);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("value=%08x\n", ret_val);
+	}
 #endif
 
-    return ret_val;
+	return ret_val;
 }
 
-void PowerSpanWrite(unsigned int theOffset, unsigned int theValue){
-    volatile unsigned int* ptr = (volatile unsigned int*)(PSPAN_BASEADDR + theOffset);
+void PowerSpanWrite (unsigned int theOffset, unsigned int theValue)
+{
+	volatile unsigned int *ptr =
+		(volatile unsigned int *) (PSPAN_BASEADDR + theOffset);
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("PowerSpanWrite: offset=%08x val=%02x\n", theOffset, theValue);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("PowerSpanWrite: offset=%08x val=%02x\n", theOffset,
+			theValue);
+	}
 #endif
-    *ptr = theValue;
-    PSII_SYNC();
+	*ptr = theValue;
+	PSII_SYNC ();
 }
 
 /**
@@ -506,21 +531,24 @@ void PowerSpanWrite(unsigned int theOffset, unsigned int theValue){
  * @param theOffset [IN] the register to access.
  * @param theMask   [IN] bits set in theMask will be set in the register.
  */
-void PowerSpanSetBits(unsigned int theOffset, unsigned int theMask){
-    volatile unsigned int* ptr = (volatile unsigned int*)(PSPAN_BASEADDR + theOffset);
-    unsigned int register_value;
+void PowerSpanSetBits (unsigned int theOffset, unsigned int theMask)
+{
+	volatile unsigned int *ptr =
+		(volatile unsigned int *) (PSPAN_BASEADDR + theOffset);
+	unsigned int register_value;
 
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("PowerSpanSetBits: offset=%08x mask=%02x\n", theOffset, theMask);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("PowerSpanSetBits: offset=%08x mask=%02x\n",
+			theOffset, theMask);
+	}
 #endif
-    register_value = *ptr;
-    PSII_SYNC();
+	register_value = *ptr;
+	PSII_SYNC ();
 
-    register_value |= theMask;
-    *ptr = register_value;
-    PSII_SYNC();
+	register_value |= theMask;
+	*ptr = register_value;
+	PSII_SYNC ();
 }
 
 /**
@@ -528,21 +556,24 @@ void PowerSpanSetBits(unsigned int theOffset, unsigned int theMask){
  * @param theOffset [IN] the register to access.
  * @param theMask   [IN] bits set in theMask will be cleared in the register.
  */
-void PowerSpanClearBits(unsigned int theOffset, unsigned int theMask){
-    volatile unsigned int* ptr = (volatile unsigned int*)(PSPAN_BASEADDR + theOffset);
-    unsigned int register_value;
+void PowerSpanClearBits (unsigned int theOffset, unsigned int theMask)
+{
+	volatile unsigned int *ptr =
+		(volatile unsigned int *) (PSPAN_BASEADDR + theOffset);
+	unsigned int register_value;
 
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("PowerSpanClearBits: offset=%08x mask=%02x\n", theOffset, theMask);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("PowerSpanClearBits: offset=%08x mask=%02x\n",
+			theOffset, theMask);
+	}
 #endif
-    register_value = *ptr;
-    PSII_SYNC();
+	register_value = *ptr;
+	PSII_SYNC ();
 
-    register_value &= ~theMask;
-    *ptr = register_value;
-    PSII_SYNC();
+	register_value &= ~theMask;
+	*ptr = register_value;
+	PSII_SYNC ();
 }
 
 /**
@@ -556,36 +587,41 @@ void PowerSpanClearBits(unsigned int theOffset, unsigned int theMask){
  * @param theLocalBaseAddr [IN] the Local address for the image (assumed to be valid with provided block size).
  * @param thePCIBaseAddr   [IN] the PCI address for the image (assumed to be valid with provided block size).
  */
-int SetSlaveImage(int theImageIndex, unsigned int theBlockSize, int theMemIOFlag, int theEndianness, unsigned int theLocalBaseAddr, unsigned int thePCIBaseAddr){
-    unsigned int reg_offset = theImageIndex * PB_SLAVE_IMAGE_OFF;
-    unsigned int reg_value = 0;
-
-    /* Make sure that the Slave Image is disabled */
-    PowerSpanClearBits((REGS_PB_SLAVE_CSR + reg_offset), PB_SLAVE_CSR_IMG_EN);
-
-    /* Setup the mask required for requested PB Slave Image configuration */
-    reg_value = PB_SLAVE_CSR_TA_EN | theEndianness | (theBlockSize << 24);
-    if(theMemIOFlag == PB_SLAVE_USE_MEM_IO){
-        reg_value |= PB_SLAVE_CSR_MEM_IO;
-    }
-
-    /* hardcoding the following:
-        TA_EN = 1
-        MD_EN = 0
-        MODE  = 0
-        PRKEEP = 0
-        RD_AMT = 0
-    */
-    PowerSpanWrite((REGS_PB_SLAVE_CSR + reg_offset), reg_value);
-
-    /* these values are not checked by software */
-    PowerSpanWrite((REGS_PB_SLAVE_BADDR + reg_offset), theLocalBaseAddr);
-    PowerSpanWrite((REGS_PB_SLAVE_TADDR + reg_offset), thePCIBaseAddr);
-
-    /* Enable the Slave Image */
-    PowerSpanSetBits((REGS_PB_SLAVE_CSR + reg_offset), PB_SLAVE_CSR_IMG_EN);
-
-    return 0;
+int SetSlaveImage (int theImageIndex, unsigned int theBlockSize,
+		   int theMemIOFlag, int theEndianness,
+		   unsigned int theLocalBaseAddr, unsigned int thePCIBaseAddr)
+{
+	unsigned int reg_offset = theImageIndex * PB_SLAVE_IMAGE_OFF;
+	unsigned int reg_value = 0;
+
+	/* Make sure that the Slave Image is disabled */
+	PowerSpanClearBits ((REGS_PB_SLAVE_CSR + reg_offset),
+			    PB_SLAVE_CSR_IMG_EN);
+
+	/* Setup the mask required for requested PB Slave Image configuration */
+	reg_value = PB_SLAVE_CSR_TA_EN | theEndianness | (theBlockSize << 24);
+	if (theMemIOFlag == PB_SLAVE_USE_MEM_IO) {
+		reg_value |= PB_SLAVE_CSR_MEM_IO;
+	}
+
+	/* hardcoding the following:
+	   TA_EN = 1
+	   MD_EN = 0
+	   MODE  = 0
+	   PRKEEP = 0
+	   RD_AMT = 0
+	 */
+	PowerSpanWrite ((REGS_PB_SLAVE_CSR + reg_offset), reg_value);
+
+	/* these values are not checked by software */
+	PowerSpanWrite ((REGS_PB_SLAVE_BADDR + reg_offset), theLocalBaseAddr);
+	PowerSpanWrite ((REGS_PB_SLAVE_TADDR + reg_offset), thePCIBaseAddr);
+
+	/* Enable the Slave Image */
+	PowerSpanSetBits ((REGS_PB_SLAVE_CSR + reg_offset),
+			  PB_SLAVE_CSR_IMG_EN);
+
+	return 0;
 }
 
 /**
@@ -602,111 +638,113 @@ int SetSlaveImage(int theImageIndex, unsigned int theBlockSize, int theMemIOFlag
  * @param theLocalBaseAddr [IN] the Local address for the image (assumed to be valid with provided block size).
  * @param thePCIBaseAddr   [IN] the PCI address for the image (assumed to be valid with provided block size).
  */
-int SetTargetImage(int theImageIndex, unsigned int theBlockSize, int theMemIOFlag, int theEndianness, unsigned int theLocalBaseAddr, unsigned int thePCIBaseAddr){
-    unsigned int csr_reg_offset = theImageIndex * P1_TGT_IMAGE_OFF;
-    unsigned int pci_reg_offset = theImageIndex * P1_BST_OFF;
-    unsigned int reg_value = 0;
-
-    /* Make sure that the Slave Image is disabled */
-    PowerSpanClearBits((REGS_P1_TGT_CSR + csr_reg_offset), PB_SLAVE_CSR_IMG_EN);
-
-    /* Setup the mask required for requested PB Slave Image configuration */
-    reg_value = PX_TGT_CSR_TA_EN | PX_TGT_CSR_BAR_EN | (theBlockSize << 24) | PX_TGT_CSR_RTT_READ | PX_TGT_CSR_WTT_WFLUSH | theEndianness;
-    if(theMemIOFlag == PX_TGT_USE_MEM_IO){
-        reg_value |= PX_TGT_MEM_IO;
-    }
-
-    /* hardcoding the following:
-        TA_EN = 1
-        BAR_EN = 1
-        MD_EN = 0
-        MODE  = 0
-        DEST  = 0
-        RTT = 01010
-        GBL = 0
-        CI = 0
-        WTT = 00010
-        PRKEEP = 0
-        MRA = 0
-        RD_AMT = 0
-    */
-    PowerSpanWrite((REGS_P1_TGT_CSR + csr_reg_offset), reg_value);
-
-    PowerSpanWrite((REGS_P1_TGT_TADDR + csr_reg_offset), theLocalBaseAddr);
-
-    if(thePCIBaseAddr != (unsigned int)NULL){
-        PowerSpanWrite((REGS_P1_BST + pci_reg_offset), thePCIBaseAddr);
-    }
-
-    /* Enable the Slave Image */
-    PowerSpanSetBits((REGS_P1_TGT_CSR + csr_reg_offset), PB_SLAVE_CSR_IMG_EN);
-
-    return 0;
+int SetTargetImage (int theImageIndex, unsigned int theBlockSize,
+		    int theMemIOFlag, int theEndianness,
+		    unsigned int theLocalBaseAddr,
+		    unsigned int thePCIBaseAddr)
+{
+	unsigned int csr_reg_offset = theImageIndex * P1_TGT_IMAGE_OFF;
+	unsigned int pci_reg_offset = theImageIndex * P1_BST_OFF;
+	unsigned int reg_value = 0;
+
+	/* Make sure that the Slave Image is disabled */
+	PowerSpanClearBits ((REGS_P1_TGT_CSR + csr_reg_offset),
+			    PB_SLAVE_CSR_IMG_EN);
+
+	/* Setup the mask required for requested PB Slave Image configuration */
+	reg_value =
+		PX_TGT_CSR_TA_EN | PX_TGT_CSR_BAR_EN | (theBlockSize << 24) |
+		PX_TGT_CSR_RTT_READ | PX_TGT_CSR_WTT_WFLUSH | theEndianness;
+	if (theMemIOFlag == PX_TGT_USE_MEM_IO) {
+		reg_value |= PX_TGT_MEM_IO;
+	}
+
+	/* hardcoding the following:
+	   TA_EN = 1
+	   BAR_EN = 1
+	   MD_EN = 0
+	   MODE  = 0
+	   DEST  = 0
+	   RTT = 01010
+	   GBL = 0
+	   CI = 0
+	   WTT = 00010
+	   PRKEEP = 0
+	   MRA = 0
+	   RD_AMT = 0
+	 */
+	PowerSpanWrite ((REGS_P1_TGT_CSR + csr_reg_offset), reg_value);
+
+	PowerSpanWrite ((REGS_P1_TGT_TADDR + csr_reg_offset),
+			theLocalBaseAddr);
+
+	if (thePCIBaseAddr != (unsigned int) NULL) {
+		PowerSpanWrite ((REGS_P1_BST + pci_reg_offset),
+				thePCIBaseAddr);
+	}
+
+	/* Enable the Slave Image */
+	PowerSpanSetBits ((REGS_P1_TGT_CSR + csr_reg_offset),
+			  PB_SLAVE_CSR_IMG_EN);
+
+	return 0;
 }
 
-int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){
-    char cmd;
-    int ret_val = 1;
-    unsigned int image_index;
-    unsigned int block_size;
-    unsigned int mem_io;
-    unsigned int local_addr;
-    unsigned int pci_addr;
-    int endianness;
-
-    if(argc != 8){
-        goto usage;
-    }
-
-    cmd = argv[1][0];
-    image_index = simple_strtoul(argv[2], NULL, 16);
-    block_size  = simple_strtoul(argv[3], NULL, 16);
-    mem_io      = simple_strtoul(argv[4], NULL, 16);
-    endianness  = argv[5][0];
-    local_addr  = simple_strtoul(argv[6], NULL, 16);
-    pci_addr    = simple_strtoul(argv[7], NULL, 16);
-
-
-    switch (cmd){
-        case 'i':{
-            if(tolower(endianness) == 'b'){
-                endianness = PX_TGT_CSR_BIG_END;
-            }
-            else if(tolower(endianness) == 'l'){
-                endianness = PX_TGT_CSR_TRUE_LEND;
-            }
-            else{
-                goto usage;
-            }
-            SetTargetImage(image_index, block_size, mem_io, endianness, local_addr, pci_addr);
-            break;
-        }
-        case 'o':{
-            if(tolower(endianness) == 'b'){
-                endianness = PB_SLAVE_CSR_BIG_END;
-            }
-            else if(tolower(endianness) == 'l'){
-                endianness = PB_SLAVE_CSR_TRUE_LEND;
-            }
-            else{
-                goto usage;
-            }
-            SetSlaveImage(image_index, block_size, mem_io, endianness, local_addr, pci_addr);
-            break;
-        }
-        default:{
-            goto usage;
-        }
-    }
-
-    goto done;
- usage:
-    printf ("Usage:\n%s\n", cmdtp->help);
-
- done:
-     return ret_val;
-
+int do_bridge (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	char cmd;
+	int ret_val = 1;
+	unsigned int image_index;
+	unsigned int block_size;
+	unsigned int mem_io;
+	unsigned int local_addr;
+	unsigned int pci_addr;
+	int endianness;
+
+	if (argc != 8) {
+		goto usage;
+	}
+
+	cmd = argv[1][0];
+	image_index = simple_strtoul (argv[2], NULL, 16);
+	block_size = simple_strtoul (argv[3], NULL, 16);
+	mem_io = simple_strtoul (argv[4], NULL, 16);
+	endianness = argv[5][0];
+	local_addr = simple_strtoul (argv[6], NULL, 16);
+	pci_addr = simple_strtoul (argv[7], NULL, 16);
+
+
+	switch (cmd) {
+	case 'i':
+		if (tolower (endianness) == 'b') {
+			endianness = PX_TGT_CSR_BIG_END;
+		} else if (tolower (endianness) == 'l') {
+			endianness = PX_TGT_CSR_TRUE_LEND;
+		} else {
+			goto usage;
+		}
+		SetTargetImage (image_index, block_size, mem_io,
+				endianness, local_addr, pci_addr);
+		break;
+	case 'o':
+		if (tolower (endianness) == 'b') {
+			endianness = PB_SLAVE_CSR_BIG_END;
+		} else if (tolower (endianness) == 'l') {
+			endianness = PB_SLAVE_CSR_TRUE_LEND;
+		} else {
+			goto usage;
+		}
+		SetSlaveImage (image_index, block_size, mem_io,
+			       endianness, local_addr, pci_addr);
+		break;
+	default:
+		goto usage;
+	}
+
+	goto done;
+usage:
+	printf ("Usage:\n%s\n", cmdtp->help);
+
+done:
+	return ret_val;
 }
-
-
-
diff --git a/board/amirix/ap1000/serial.c b/board/amirix/ap1000/serial.c
index 431e469..39c4157 100644
--- a/board/amirix/ap1000/serial.c
+++ b/board/amirix/ap1000/serial.c
@@ -31,65 +31,59 @@
 #include "serial.h"
 #endif
 
-const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1, (NS16550_t) CFG_NS16550_COM2 };
+const NS16550_t COM_PORTS[] =
+	{ (NS16550_t) CFG_NS16550_COM1, (NS16550_t) CFG_NS16550_COM2 };
 
 #undef CFG_DUART_CHAN
 #define CFG_DUART_CHAN gComPort
 static int gComPort = 0;
 
-int
-serial_init (void)
+int serial_init (void)
 {
-    DECLARE_GLOBAL_DATA_PTR;
-
-    int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+	DECLARE_GLOBAL_DATA_PTR;
 
-    (void)NS16550_init(COM_PORTS[0], clock_divisor);
-    gComPort = 0;
+	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
 
-    return 0;
+	(void) NS16550_init (COM_PORTS[0], clock_divisor);
+	gComPort = 0;
 
+	return 0;
 }
 
-void
-serial_putc(const char c)
+void serial_putc (const char c)
 {
-    if (c == '\n'){
-        NS16550_putc(COM_PORTS[CFG_DUART_CHAN], '\r');
-    }
+	if (c == '\n') {
+		NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r');
+	}
 
-    NS16550_putc(COM_PORTS[CFG_DUART_CHAN], c);
+	NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c);
 }
 
-int
-serial_getc(void)
+int serial_getc (void)
 {
-    return NS16550_getc(COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]);
 }
 
-int
-serial_tstc(void)
+int serial_tstc (void)
 {
-    return NS16550_tstc(COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]);
 }
 
-void
-serial_setbrg (void)
+void serial_setbrg (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-    int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+	int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
 
 #ifdef CFG_INIT_CHAN1
-    NS16550_reinit(COM_PORTS[0], clock_divisor);
+	NS16550_reinit (COM_PORTS[0], clock_divisor);
 #endif
 #ifdef CFG_INIT_CHAN2
-    NS16550_reinit(COM_PORTS[1], clock_divisor);
+	NS16550_reinit (COM_PORTS[1], clock_divisor);
 #endif
 }
 
-void
-serial_puts (const char *s)
+void serial_puts (const char *s)
 {
 	while (*s) {
 		serial_putc (*s++);
@@ -97,32 +91,27 @@ serial_puts (const char *s)
 }
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-void
-kgdb_serial_init(void)
+void kgdb_serial_init (void)
 {
 }
 
-void
-putDebugChar (int c)
+void putDebugChar (int c)
 {
 	serial_putc (c);
 }
 
-void
-putDebugStr (const char *str)
+void putDebugStr (const char *str)
 {
 	serial_puts (str);
 }
 
-int
-getDebugChar (void)
+int getDebugChar (void)
 {
-	return serial_getc();
+	return serial_getc ();
 }
 
-void
-kgdb_interruptible (int yes)
+void kgdb_interruptible (int yes)
 {
 	return;
 }
-#endif	/* CFG_CMD_KGDB	*/
+#endif /* CFG_CMD_KGDB */