Merge git://www.denx.de/git/u-boot

Conflicts:

	board/tqm5200/tqm5200.c

32 files changed, 2543 insertions, 1170 deletions

diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
index 00c793a..c4eace5 100644
--- a/board/amcc/bamboo/bamboo.c
+++ b/board/amcc/bamboo/bamboo.c
@@ -67,13 +67,13 @@ const unsigned char cfg_simulate_spd_eeprom[128] = {
 	0x00,    /* Module data width continued: +0 */
 	0x04,    /* 2.5 Volt */
 	0x75,    /* SDRAM Cycle Time (cas latency 2.5) = 7.5 ns */
+	0x00,    /* SDRAM Access from clock */
 #ifdef CONFIG_DDR_ECC
 	0x02,    /* ECC ON : 02 OFF : 00 */
 #else
 	0x00,    /* ECC ON : 02 OFF : 00 */
 #endif
-	0x82,    /* refresh Rate Type: Normal (15.625us) + Self refresh */
-	0,
+	0x82,    /* refresh Rate Type: Normal (7.8us) + Self refresh */
 	0,
 	0,
 	0x01,    /* wcsbc = 1 */
diff --git a/board/amcc/bubinga/u-boot.lds b/board/amcc/bubinga/u-boot.lds
index be03092..b08c999 100644
--- a/board/amcc/bubinga/u-boot.lds
+++ b/board/amcc/bubinga/u-boot.lds
@@ -62,19 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/ebony/u-boot.lds b/board/amcc/ebony/u-boot.lds
index 5a1c5b1..e32b030 100644
--- a/board/amcc/ebony/u-boot.lds
+++ b/board/amcc/ebony/u-boot.lds
@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/ebony/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index a49066f..e41caaf 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -24,21 +24,16 @@
 
 #include <common.h>
 #include <ppc4xx.h>
-#include <asm/processor.h>
 #include <i2c.h>
-#include <asm-ppc/io.h>
-#include <asm-ppc/gpio.h>
-
-#include "../cpu/ppc4xx/440spe_pcie.h"
-
-#undef PCIE_ENDPOINT
-/* #define PCIE_ENDPOINT 1 */
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/4xx_pcie.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int ppc440spe_init_pcie_rootport(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
-
 int board_early_init_f (void)
 {
 	unsigned long mfr;
@@ -224,10 +219,9 @@ int board_early_init_f (void)
 	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts*/
 	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts*/
 
-/* SDR0_MFR should be part of Ethernet init */
-	mfsdr (sdr_mfr, mfr);
-	mfr &= ~SDR0_MFR_ECS_MASK;
-/*	mtsdr(sdr_mfr, mfr); */
+	mfsdr(sdr_mfr, mfr);
+	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
+	mtsdr(sdr_mfr, mfr);
 
 	mtsdr(SDR0_PFC0, CFG_PFC0);
 
@@ -252,6 +246,18 @@ int checkboard (void)
 	return 0;
 }
 
+/*
+ * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
+ * board specific values.
+ */
+u32 ddr_wrdtr(u32 default_val) {
+	return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_180_DEG_ADV | 0x823);
+}
+
+u32 ddr_clktr(u32 default_val) {
+	return (SDRAM_CLKTR_CLKP_90_DEG_ADV);
+}
+
 #if defined(CFG_DRAM_TEST)
 int testdram (void)
 {
@@ -396,6 +402,7 @@ void pcie_setup_hoses(int busno)
 {
 	struct pci_controller *hose;
 	int i, bus;
+	int ret = 0;
 	char *env;
 	unsigned int delay;
 
@@ -409,12 +416,13 @@ void pcie_setup_hoses(int busno)
 		if (!katmai_pcie_card_present(i))
 			continue;
 
-#ifdef PCIE_ENDPOINT
- 		if (ppc440spe_init_pcie_endport(i)) {
-#else
-		if (ppc440spe_init_pcie_rootport(i)) {
-#endif
-			printf("PCIE%d: initialization failed\n", i);
+		if (is_end_point(i))
+			ret = ppc4xx_init_pcie_endport(i);
+		else
+			ret = ppc4xx_init_pcie_rootport(i);
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
 			continue;
 		}
 
@@ -428,35 +436,33 @@ void pcie_setup_hoses(int busno)
 			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			       CFG_PCIE_MEMSIZE,
-			       PCI_REGION_MEM
-			);
+			       PCI_REGION_MEM);
 		hose->region_count = 1;
 		pci_register_hose(hose);
 
-#ifdef PCIE_ENDPOINT
-		ppc440spe_setup_pcie_endpoint(hose, i);
-		/*
-		 * Reson for no scanning is endpoint can not generate
-		 * upstream configuration accesses.
-		 */
-#else
-		ppc440spe_setup_pcie_rootpoint(hose, i);
-
-		env = getenv ("pciscandelay");
-		if (env != NULL) {
-			delay = simple_strtoul (env, NULL, 10);
-			if (delay > 5)
-				printf ("Warning, expect noticable delay before PCIe"
-					"scan due to 'pciscandelay' value!\n");
-			mdelay (delay * 1000);
+		if (is_end_point(i)) {
+		    	ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+		    	 */
+		} else {
+		    	ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv ("pciscandelay");
+		    	if (env != NULL) {
+			    	delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
+
+		    	/*
+		     	 * Config access can only go down stream
+		     	 */
+		    	hose->last_busno = pci_hose_scan(hose);
+		    	bus = hose->last_busno + 1;
 		}
-
-		/*
-		 * Config access can only go down stream
-		 */
-		hose->last_busno = pci_hose_scan(hose);
-		bus = hose->last_busno + 1;
-#endif
 	}
 }
 #endif	/* defined(CONFIG_PCI) */
@@ -541,3 +547,24 @@ int post_hotkeys_pressed(void)
 	return (ctrlc());
 }
 #endif
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/amcc/kilauea/Makefile b/board/amcc/kilauea/Makefile
new file mode 100644
index 0000000..b8da25f
--- /dev/null
+++ b/board/amcc/kilauea/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o cmd_pll.o memory.o
+SOBJS	= init.o
+
+SRCS 	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c
new file mode 100644
index 0000000..b2666dd
--- /dev/null
+++ b/board/amcc/kilauea/cmd_pll.c
@@ -0,0 +1,297 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * ehnus: change pll frequency.
+ * Wed Sep  5 11:45:17 CST 2007
+ * hsun@udtech.com.cn
+ */
+
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <i2c.h>
+
+#ifdef CONFIG_CMD_EEPROM
+
+#define EEPROM_CONF_OFFSET		0
+#define EEPROM_TEST_OFFSET		16
+#define EEPROM_SDSTP_PARAM		16
+
+#define PLL_NAME_MAX			12
+#define BUF_STEP			8
+
+/* eeprom_wirtes 8Byte per op. */
+#define EEPROM_ALTER_FREQ(freq)						\
+	do {								\
+		int __i;						\
+		for (__i = 0; __i < 2; __i++)				\
+			eeprom_write (CFG_I2C_EEPROM_ADDR,		\
+				      EEPROM_CONF_OFFSET + __i*BUF_STEP, \
+				      pll_select[freq],			\
+				      BUF_STEP + __i*BUF_STEP);		\
+	} while (0)
+
+#define PDEBUG
+#ifdef	PDEBUG
+#define PLL_DEBUG	pll_debug(EEPROM_CONF_OFFSET)
+#else
+#define PLL_DEBUG
+#endif
+
+typedef enum {
+	PLL_ebc20,
+	PLL_333,
+	PLL_4001,
+	PLL_4002,
+	PLL_533,
+	PLL_600,
+	PLL_666,	/* For now, kilauea can't support */
+	RCONF,
+	WTEST,
+	PLL_TOTAL
+} pll_freq_t;
+
+static const char
+pll_name[][PLL_NAME_MAX] = {
+	"PLL_ebc20",
+	"PLL_333",
+	"PLL_400@1",
+	"PLL_400@2",
+	"PLL_533",
+	"PLL_600",
+	"PLL_666",
+	"RCONF",
+	"WTEST",
+	""
+};
+
+/*
+ * ehnus:
+ */
+static uchar
+pll_select[][EEPROM_SDSTP_PARAM] = {
+	/* 0: CPU 333MHz EBC 20MHz, for test only */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 0: 333 */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 1: 400_266 */
+	{
+		0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 2: 400 */
+	{
+		0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 3: 533 */
+	{
+		0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 4: 600 */
+	{
+		0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 5: 666 */
+	{
+		0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	{}
+};
+
+static uchar
+testbuf[EEPROM_SDSTP_PARAM] = {
+	0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
+	0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
+};
+
+static void
+pll_debug(int off)
+{
+	int i;
+	uchar buffer[EEPROM_SDSTP_PARAM];
+
+	memset(buffer, 0, sizeof(buffer));
+	eeprom_read(CFG_I2C_EEPROM_ADDR, off,
+		    buffer, EEPROM_SDSTP_PARAM);
+
+	printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
+	for (i = 0; i < EEPROM_SDSTP_PARAM; i++)
+		printf("%02x ", buffer[i]);
+	printf("\n");
+}
+
+static void
+test_write(void)
+{
+	printf("Debug: test eeprom_write ... ");
+
+	/*
+	 * Write twice, 8 bytes per write
+	 */
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+		      testbuf, 8);
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+		      testbuf, 16);
+	printf("done\n");
+
+	pll_debug(EEPROM_TEST_OFFSET);
+}
+
+int
+do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	char c = '\0';
+	pll_freq_t pll_freq;
+	if (argc < 2) {
+		printf("Usage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++)
+		if (!strcmp(pll_name[pll_freq], argv[1]))
+			break;
+
+	switch (pll_freq) {
+	case PLL_ebc20:
+	case PLL_333:
+	case PLL_4001:
+	case PLL_4002:
+	case PLL_533:
+	case PLL_600:
+		EEPROM_ALTER_FREQ(pll_freq);
+		break;
+
+	case PLL_666:		/* not support */
+		printf("Choose this option will result in a boot failure."
+		       "\nContinue? (Y/N): ");
+
+		c = getc(); putc('\n');
+
+		if ((c == 'y') || (c == 'Y')) {
+			EEPROM_ALTER_FREQ(pll_freq);
+			break;
+		}
+		goto ret;
+
+	case RCONF:
+		pll_debug(EEPROM_CONF_OFFSET);
+		goto ret;
+	case WTEST:
+		printf("DEBUG: write test\n");
+		test_write();
+		goto ret;
+
+	default:
+		printf("Invalid options"
+		       "\n\nUsage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	printf("PLL set to %s, "
+	       "reset the board to take effect\n", pll_name[pll_freq]);
+
+	PLL_DEBUG;
+ret:
+	return 0;
+}
+
+U_BOOT_CMD(
+	pllalter, CFG_MAXARGS, 1,        do_pll_alter,
+	"pllalter- change pll frequence \n",
+	"pllalter <selection>      - change pll frequence \n\n\
+	** New freq take effect after reset. ** \n\
+	----------------------------------------------\n\
+	PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	Same as PLL_333	\n\
+	\t	except          \n\
+	\t	EBC: 20 MHz     \n\
+	----------------------------------------------\n\
+	PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 666 MHz  \n\
+	\t	CPU: 333 MHz  \n\
+	\t	PLB: 166 MHz  \n\
+	\t	OPB: 83 MHz   \n\
+	\t	DDR: 83 MHz   \n\
+	------------------------------------------------\n\
+	PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 133 MHz  \n\
+	\t	OPB: 66  MHz  \n\
+	\t	DDR: 133 MHz  \n\
+	------------------------------------------------\n\
+	PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 200 MHz  \n\
+	\t	OPB: 100 MHz  \n\
+	\t	DDR: 200 MHz  \n\
+	----------------------------------------------\n\
+	PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1066 MHz  \n\
+	\t	CPU: 533  MHz  \n\
+	\t	PLB: 177  MHz  \n\
+	\t	OPB: 88   MHz  \n\
+	\t	DDR: 177  MHz  \n\
+	----------------------------------------------\n\
+	PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1200 MHz  \n\
+	\t	CPU: 600  MHz  \n\
+	\t	PLB: 200  MHz  \n\
+	\t	OPB: 100  MHz  \n\
+	\t	DDR: 200  MHz  \n\
+	----------------------------------------------\n\
+	PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1333 MHz  \n\
+	\t	CPU: 666  MHz  \n\
+	\t	PLB: 166  MHz  \n\
+	\t	OPB: 83   MHz  \n\
+	\t	DDR: 166  MHz  \n\
+	-----------------------------------------------\n\
+	RCONF: Read current eeprom configuration.      \n\
+	-----------------------------------------------\n\
+	WTEST: Test EEPROM write with predefined values\n\
+	-----------------------------------------------\n"
+	);
+
+#endif	/* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
diff --git a/board/amcc/kilauea/config.mk b/board/amcc/kilauea/config.mk
new file mode 100644
index 0000000..f5800eb
--- /dev/null
+++ b/board/amcc/kilauea/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
diff --git a/board/amcc/kilauea/init.S b/board/amcc/kilauea/init.S
new file mode 100644
index 0000000..4338744
--- /dev/null
+++ b/board/amcc/kilauea/init.S
@@ -0,0 +1,154 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Based on code provided from UDTech and AMCC
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#define mtsdram_as(reg, value)	 	\
+	addi    r4,0,reg	;     	\
+	mtdcr   memcfga,r4	;	\
+	addis   r4,0,value@h 	;	\
+	ori     r4,r4,value@l	;	\
+	mtdcr   memcfgd,r4	;
+
+	.globl  ext_bus_cntlr_init
+ext_bus_cntlr_init:
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+
+	/*
+	 * DDR2 setup
+	 */
+
+	/* Following the DDR Core Manual, here is the initialization */
+
+	/* Step 1 */
+
+	/* Step 2 */
+
+	/* Step 3 */
+
+	/* base=00000000, size=256MByte (6), mode=7 (n*10*8) */
+	mtsdram_as(SDRAM_MB0CF, 0x00006701);
+
+	/* SET SDRAM_MB1CF - Not enabled */
+	mtsdram_as(SDRAM_MB1CF, 0x00000000);
+
+	/* SET SDRAM_MB2CF  - Not enabled */
+	mtsdram_as(SDRAM_MB2CF, 0x00000000);
+
+	/* SET SDRAM_MB3CF  - Not enabled */
+	mtsdram_as(SDRAM_MB3CF, 0x00000000);
+
+	/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+	mtsdram_as(SDRAM_CLKTR, 0x80000000);
+
+	/* Refresh Time register (0x30) Refresh every 7.8125uS */
+	mtsdram_as(SDRAM_RTR, 0x06180000);
+
+	/* SDRAM_SDTR1 */
+	mtsdram_as(SDRAM_SDTR1, 0x80201000);
+
+	/* SDRAM_SDTR2	*/
+	mtsdram_as(SDRAM_SDTR2, 0x32204232);
+
+	/* SDRAM_SDTR3	*/
+	mtsdram_as(SDRAM_SDTR3, 0x080b0d1a);
+
+	mtsdram_as(SDRAM_MMODE, 0x00000442);
+	mtsdram_as(SDRAM_MEMODE, 0x00000404);
+
+	/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
+	mtsdram_as(SDRAM_MCOPT1, 0x04322000);
+
+	/* NOP */
+	mtsdram_as(SDRAM_INITPLR0, 0xa8380000);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR1, 0x81900400);
+	/* EMR2 twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR2, 0x81020000);
+	/* EMR3  twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR3, 0x81030000);
+	/* EMR DLL ENABLE twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR4, 0x81010404);
+	/* MR w/ DLL reset
+	 * Note: 5 is CL.  May need to be changed
+	 */
+	mtsdram_as(SDRAM_INITPLR5, 0x81000542);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR6, 0x81900400);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR7, 0x8D080000);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR8, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR9, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR10, 0x8D080000);
+	/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
+	mtsdram_as(SDRAM_INITPLR11, 0x81000442);
+	mtsdram_as(SDRAM_INITPLR12, 0x81010780);
+	mtsdram_as(SDRAM_INITPLR13, 0x81010400);
+	mtsdram_as(SDRAM_INITPLR14, 0x00000000);
+	mtsdram_as(SDRAM_INITPLR15, 0x00000000);
+
+	/* SET MCIF0_CODT   Die Termination On */
+	mtsdram_as(SDRAM_CODT, 0x0080f837);
+	mtsdram_as(SDRAM_MODT0, 0x01800000);
+	mtsdram_as(SDRAM_MODT1, 0x00000000);
+
+	mtsdram_as(SDRAM_WRDTR, 0x00000000);
+
+	/* SDRAM0_MCOPT2 (0X21) Start initialization */
+	mtsdram_as(SDRAM_MCOPT2, 0x20000000);
+
+	/* Step 5 */
+	lis     r3,0x1	/* 400000 =  wait 100ms */
+	mtctr   r3
+
+pll_wait:
+	bdnz	pll_wait
+
+	/* Step 6 */
+
+	/* SDRAM_DLCR */
+	mtsdram_as(SDRAM_DLCR, 0x030000a5);
+
+	/* SDRAM_RDCC */
+	mtsdram_as(SDRAM_RDCC, 0x40000000);
+
+	/* SDRAM_RQDC */
+	mtsdram_as(SDRAM_RQDC, 0x80000038);
+
+	/* SDRAM_RFDC */
+	mtsdram_as(SDRAM_RFDC, 0x00000209);
+
+	/* Enable memory controller */
+	mtsdram_as(SDRAM_MCOPT2, 0x28000000);
+#endif /* #ifndef CONFIG_NAND_U_BOOT */
+
+	blr
diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c
new file mode 100644
index 0000000..2ee896a
--- /dev/null
+++ b/board/amcc/kilauea/kilauea.c
@@ -0,0 +1,392 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <ppc405.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#include <asm/4xx_pcie.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*
+ * Board early initialization function
+ */
+int board_early_init_f (void)
+{
+	u32 val;
+
+	/*--------------------------------------------------------------------+
+	 | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board.
+	 +--------------------------------------------------------------------+
+	+---------------------------------------------------------------------+
+	|Interrupt| Source                            | Pol.  | Sensi.| Crit. |
+	+---------+-----------------------------------+-------+-------+-------+
+	| IRQ 00  | UART0                             | High  | Level | Non   |
+	| IRQ 01  | UART1                             | High  | Level | Non   |
+	| IRQ 02  | IIC0                              | High  | Level | Non   |
+	| IRQ 03  | TBD                               | High  | Level | Non   |
+	| IRQ 04  | TBD                               | High  | Level | Non   |
+	| IRQ 05  | EBM                               | High  | Level | Non   |
+	| IRQ 06  | BGI                               | High  | Level | Non   |
+	| IRQ 07  | IIC1                              | Rising| Edge  | Non   |
+	| IRQ 08  | SPI                               | High  | Lvl/ed| Non   |
+	| IRQ 09  | External IRQ 0 - (PCI-Express)    | pgm H | Pgm   | Non   |
+	| IRQ 10  | MAL TX EOB                        | High  | Level | Non   |
+	| IRQ 11  | MAL RX EOB                        | High  | Level | Non   |
+	| IRQ 12  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
+	| IRQ 13  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
+	| IRQ 14  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
+	| IRQ 15  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
+	| IRQ 16  | PCIE0 AL                          | high  | Level | Non   |
+	| IRQ 17  | PCIE0 VPD access                  | rising| Edge  | Non   |
+	| IRQ 18  | PCIE0 hot reset request           | rising| Edge  | Non   |
+	| IRQ 19  | PCIE0 hot reset request           | faling| Edge  | Non   |
+	| IRQ 20  | PCIE0 TCR                         | High  | Level | Non   |
+	| IRQ 21  | PCIE0 MSI level0                  | High  | Level | Non   |
+	| IRQ 22  | PCIE0 MSI level1                  | High  | Level | Non   |
+	| IRQ 23  | Security EIP-94                   | High  | Level | Non   |
+	| IRQ 24  | EMAC0 interrupt                   | High  | Level | Non   |
+	| IRQ 25  | EMAC1 interrupt                   | High  | Level | Non   |
+	| IRQ 26  | PCIE0 MSI level2                  | High  | Level | Non   |
+	| IRQ 27  | External IRQ 4                    | pgm H | Pgm   | Non   |
+	| IRQ 28  | UIC2 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 29  | UIC2 Critical Interrupt           | High  | Level | Crit. |
+	| IRQ 30  | UIC1 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 31  | UIC1 Critical Interrupt           | High  | Level | Crit. |
+	|----------------------------------------------------------------------
+	| IRQ 32  | MAL Serr                          | High  | Level | Non   |
+	| IRQ 33  | MAL Txde                          | High  | Level | Non   |
+	| IRQ 34  | MAL Rxde                          | High  | Level | Non   |
+	| IRQ 35  | PCIE0 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 36  | PCIE0 DCR Error                   | High  | Level | Non   |
+	| IRQ 37  | EBC                               | High  |Lvl Edg| Non   |
+	| IRQ 38  | NDFC                              | High  | Level | Non   |
+	| IRQ 39  | GPT Compare Timer 8               | Risin | Edge  | Non   |
+	| IRQ 40  | GPT Compare Timer 9               | Risin | Edge  | Non   |
+	| IRQ 41  | PCIE1 AL                          | high  | Level | Non   |
+	| IRQ 42  | PCIE1 VPD access                  | rising| edge  | Non   |
+	| IRQ 43  | PCIE1 hot reset request           | rising| Edge  | Non   |
+	| IRQ 44  | PCIE1 hot reset request           | faling| Edge  | Non   |
+	| IRQ 45  | PCIE1 TCR                         | High  | Level | Non   |
+	| IRQ 46  | PCIE1 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
+	| IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
+	| IRQ 49  | Ext. IRQ 7                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 50  | Ext. IRQ 8 -                      |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 51  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 52  | GPT Compare Timer 5               | high  | Edge  | Non   |
+	| IRQ 53  | GPT Compare Timer 6               | high  | Edge  | Non   |
+	| IRQ 54  | GPT Compare Timer 7               | high  | Edge  | Non   |
+	| IRQ 55  | Serial ROM                        | High  | Level | Non   |
+	| IRQ 56  | GPT Decrement Pulse               | High  | Level | Non   |
+	| IRQ 57  | Ext. IRQ 2                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 58  | Ext. IRQ 5                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 59  | Ext. IRQ 6                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 60  | EMAC0 Wake-up                     | High  | Level | Non   |
+	| IRQ 61  | Ext. IRQ 1                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 62  | EMAC1 Wake-up                     | High  | Level | Non   |
+	|----------------------------------------------------------------------
+	| IRQ 64  | PE0 AL                            | High  | Level | Non   |
+	| IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 68  | PE0 TCR                           | High  | Level | Non   |
+	| IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
+	| IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 72  | PE1 AL                            | High  | Level | Non   |
+	| IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 76  | PE1 TCR                           | High  | Level | Non   |
+	| IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
+	| IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 80  | PE2 AL                            | High  | Level | Non   |
+	| IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 84  | PE2 TCR                           | High  | Level | Non   |
+	| IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
+	| IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
+	| IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
+	| IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
+	|---------------------------------------------------------------------
+	+---------+-----------------------------------+-------+-------+------*/
+	/*--------------------------------------------------------------------+
+	 | Initialise UIC registers.  Clear all interrupts.  Disable all
+	 | interrupts.
+	 | Set critical interrupt values.  Set interrupt polarities.  Set
+	 | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
+	 | interrupts again.
+	 +-------------------------------------------------------------------*/
+
+	mtdcr (uic2sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic2er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic2cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic2pr, 0xf7ffffff);	/* Set Interrupt Polarities */
+	mtdcr (uic2tr, 0x01e1fff8);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic2vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic2sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic2sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic1sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic1er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic1cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic1pr, 0xfffac785);	/* Set Interrupt Polarities */
+	mtdcr (uic1tr, 0x001d0040);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic1vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic1sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic1sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic0sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic0er, 0x0000000a);	/* Disable all interrupts */
+					/* Except cascade UIC0 and UIC1 */
+	mtdcr (uic0cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic0pr, 0xffbfefef);	/* Set Interrupt Polarities */
+	mtdcr (uic0tr, 0x00007000);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic0vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
+
+	/*
+	 * Note: Some cores are still in reset when the chip starts, so
+	 * take them out of reset
+	 */
+	mtsdr(SDR0_SRST, 0);
+
+	/*
+	 * Configure FPGA register with PCIe reset
+	 */
+	out_be32((void *)CFG_FPGA_BASE, 0xff570cc0);	/* assert PCIe reset */
+	mdelay(50);
+	out_be32((void *)CFG_FPGA_BASE, 0xff570cc3);	/* deassert PCIe reset */
+
+	/* Configure 405EX for NAND usage */
+	val = SDR0_CUST0_MUX_NDFC_SEL |
+		SDR0_CUST0_NDFC_ENABLE |
+		SDR0_CUST0_NDFC_BW_8_BIT |
+		SDR0_CUST0_NRB_BUSY |
+		(0x80000000 >> (28 + CFG_NAND_CS));
+	mtsdr(SDR0_CUST0, val);
+
+	/*
+	 * Configure PFC (Pin Function Control) registers
+	 * -> Enable USB
+	 */
+	val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ;
+	mtsdr(SDR0_PFC1, val);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+#ifdef CFG_ENV_IS_IN_FLASH
+	/* Monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      -CFG_MONITOR_LEN,
+		      0xffffffff,
+		      &flash_info[0]);
+#endif
+
+	return 0;
+}
+
+int board_emac_count(void)
+{
+	u32 pvr = get_pvr();
+
+	/*
+	 * 405EXr only has one EMAC interface, 405EX has two
+	 */
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		return 1;
+	else
+		return 2;
+}
+
+static int board_pcie_count(void)
+{
+	u32 pvr = get_pvr();
+
+	/*
+	 * 405EXr only has one EMAC interface, 405EX has two
+	 */
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		return 1;
+	else
+		return 2;
+}
+
+int checkboard (void)
+{
+	char *s = getenv("serial#");
+	u32 pvr = get_pvr();
+
+	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+		printf("Board: Haleakala - AMCC PPC405EXr Evaluation Board");
+	else
+		printf("Board: Kilauea - AMCC PPC405EX Evaluation Board");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *      Different boards may wish to customize the pci controller structure
+ *      (add regions, override default access routines, etc) or perform
+ *      certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller * hose )
+{
+	return 0;
+}
+#endif  /* defined(CONFIG_PCI) */
+
+#ifdef CONFIG_PCI
+static struct pci_controller pcie_hose[2] = {{0},{0}};
+
+void pcie_setup_hoses(int busno)
+{
+	struct pci_controller *hose;
+	int i, bus;
+	int ret = 0;
+	bus = busno;
+	char *env;
+	unsigned int delay;
+
+	for (i = 0; i < board_pcie_count(); i++) {
+
+		if (is_end_point(i))
+			ret = ppc4xx_init_pcie_endport(i);
+		else
+			ret = ppc4xx_init_pcie_rootport(i);
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
+			continue;
+		}
+
+		hose = &pcie_hose[i];
+		hose->first_busno = bus;
+		hose->last_busno = bus;
+		hose->current_busno = bus;
+
+		/* setup mem resource */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMSIZE,
+			       PCI_REGION_MEM);
+		hose->region_count = 1;
+		pci_register_hose(hose);
+
+		if (is_end_point(i)) {
+		    	ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+		    	 */
+		} else {
+		    	ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv ("pciscandelay");
+		    	if (env != NULL) {
+			    	delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
+
+		    	/*
+		     	 * Config access can only go down stream
+		     	 */
+		    	hose->last_busno = pci_hose_scan(hose);
+		    	bus = hose->last_busno + 1;
+		}
+	}
+}
+#endif
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/amcc/kilauea/memory.c b/board/amcc/kilauea/memory.c
new file mode 100644
index 0000000..1d7a3fa
--- /dev/null
+++ b/board/amcc/kilauea/memory.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+
+void sdram_init(void)
+{
+	return;
+}
+
+long int initdram(int board_type)
+{
+	return (CFG_MBYTES_SDRAM << 20);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+    printf ("testdram\n");
+#if defined (CONFIG_NAND_U_BOOT)
+    return 0;
+#endif
+	uint *pstart = (uint *) 0x00000000;
+	uint *pend = (uint *) 0x00001000;
+	uint *p;
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0xaaaaaaaa;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0x55555555;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+#if !defined (CONFIG_NAND_SPL)
+	printf ("SDRAM test passed!!!\n");
+#endif
+	return 0;
+}
+#endif
diff --git a/board/amcc/yucca/u-boot.lds.debug b/board/amcc/kilauea/u-boot-nand.lds
index 474f922..a5dae0e 100644
--- a/board/amcc/yucca/u-boot.lds.debug
+++ b/board/amcc/kilauea/u-boot-nand.lds
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2002-2004
+ * (C) Copyright 2007
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -23,8 +23,6 @@
 
 OUTPUT_ARCH(powerpc)
 SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
 SECTIONS
 {
   /* Read-only sections, merged into text segment: */
@@ -33,43 +31,36 @@ SECTIONS
   .hash          : { *(.hash)		}
   .dynsym        : { *(.dynsym)		}
   .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
   .rel.ctors     : { *(.rel.ctors)	}
   .rela.ctors    : { *(.rela.ctors)	}
   .rel.dtors     : { *(.rel.dtors)	}
   .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
   .plt : { *(.plt) }
   .text      :
   {
     /* WARNING - the following is hand-optimized to fit within	*/
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
-    cpu/ppc4xx/start.o		(.text)
-    board/amcc/yucca/init.o	(.text)
-    cpu/ppc4xx/kgdb.o		(.text)
-    cpu/ppc4xx/traps.o		(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o		(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o		(.text)
-    lib_generic/zlib.o		(.text)
+    cpu/ppc4xx/start.o	(.text)
 
-/*    common/environment.o(.text) */
+    /* Align to next NAND block */
+    . = ALIGN(0x4000);
+    common/environment.o  (.ppcenv)
+    /* Keep some space here for redundant env and potential bad env blocks */
+    . = ALIGN(0x10000);
 
     *(.text)
     *(.fixup)
@@ -82,14 +73,13 @@ SECTIONS
     *(.rodata)
     *(.rodata1)
     *(.rodata.str1.4)
-    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
 
   /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
+  . = (. + 0x00FF) & 0xFFFFFF00;
   _erotext = .;
   PROVIDE (erotext = .);
   .reloc   :
@@ -141,6 +131,7 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
+
   _end = . ;
   PROVIDE (end = .);
 }
diff --git a/board/amcc/kilauea/u-boot.lds b/board/amcc/kilauea/u-boot.lds
new file mode 100644
index 0000000..390b3f3
--- /dev/null
+++ b/board/amcc/kilauea/u-boot.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+/* To compile successfully, uncomment the following section.
+ * To go in ram, remove the section.
+ * Added by SunHe.
+ */
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index 0067ce0..f964511 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -39,6 +39,8 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
  ************************************************************************/
 int board_early_init_f(void)
 {
+	u32 mfr;
+
 	mtebc( pb0ap,  0x03800000 );	/* set chip selects */
 	mtebc( pb0cr,  0xffc58000 );	/* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
 	mtebc( pb1ap,  0x03800000 );
@@ -64,6 +66,10 @@ int board_early_init_f(void)
 	mtdcr( uic0sr, 0x00000000 );	/* clear all interrupts */
 	mtdcr( uic0sr, 0xffffffff );
 
+	mfsdr(sdr_mfr, mfr);
+	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
+	mtsdr(sdr_mfr, mfr);
+
 	return  0;
 }
 
diff --git a/board/amcc/makalu/Makefile b/board/amcc/makalu/Makefile
new file mode 100644
index 0000000..b8da25f
--- /dev/null
+++ b/board/amcc/makalu/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o cmd_pll.o memory.o
+SOBJS	= init.o
+
+SRCS 	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c
new file mode 100644
index 0000000..b2666dd
--- /dev/null
+++ b/board/amcc/makalu/cmd_pll.c
@@ -0,0 +1,297 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * ehnus: change pll frequency.
+ * Wed Sep  5 11:45:17 CST 2007
+ * hsun@udtech.com.cn
+ */
+
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <i2c.h>
+
+#ifdef CONFIG_CMD_EEPROM
+
+#define EEPROM_CONF_OFFSET		0
+#define EEPROM_TEST_OFFSET		16
+#define EEPROM_SDSTP_PARAM		16
+
+#define PLL_NAME_MAX			12
+#define BUF_STEP			8
+
+/* eeprom_wirtes 8Byte per op. */
+#define EEPROM_ALTER_FREQ(freq)						\
+	do {								\
+		int __i;						\
+		for (__i = 0; __i < 2; __i++)				\
+			eeprom_write (CFG_I2C_EEPROM_ADDR,		\
+				      EEPROM_CONF_OFFSET + __i*BUF_STEP, \
+				      pll_select[freq],			\
+				      BUF_STEP + __i*BUF_STEP);		\
+	} while (0)
+
+#define PDEBUG
+#ifdef	PDEBUG
+#define PLL_DEBUG	pll_debug(EEPROM_CONF_OFFSET)
+#else
+#define PLL_DEBUG
+#endif
+
+typedef enum {
+	PLL_ebc20,
+	PLL_333,
+	PLL_4001,
+	PLL_4002,
+	PLL_533,
+	PLL_600,
+	PLL_666,	/* For now, kilauea can't support */
+	RCONF,
+	WTEST,
+	PLL_TOTAL
+} pll_freq_t;
+
+static const char
+pll_name[][PLL_NAME_MAX] = {
+	"PLL_ebc20",
+	"PLL_333",
+	"PLL_400@1",
+	"PLL_400@2",
+	"PLL_533",
+	"PLL_600",
+	"PLL_666",
+	"RCONF",
+	"WTEST",
+	""
+};
+
+/*
+ * ehnus:
+ */
+static uchar
+pll_select[][EEPROM_SDSTP_PARAM] = {
+	/* 0: CPU 333MHz EBC 20MHz, for test only */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 0: 333 */
+	{
+		0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 1: 400_266 */
+	{
+		0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 2: 400 */
+	{
+		0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 3: 533 */
+	{
+		0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 4: 600 */
+	{
+		0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	/* 5: 666 */
+	{
+		0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	},
+
+	{}
+};
+
+static uchar
+testbuf[EEPROM_SDSTP_PARAM] = {
+	0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
+	0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
+};
+
+static void
+pll_debug(int off)
+{
+	int i;
+	uchar buffer[EEPROM_SDSTP_PARAM];
+
+	memset(buffer, 0, sizeof(buffer));
+	eeprom_read(CFG_I2C_EEPROM_ADDR, off,
+		    buffer, EEPROM_SDSTP_PARAM);
+
+	printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
+	for (i = 0; i < EEPROM_SDSTP_PARAM; i++)
+		printf("%02x ", buffer[i]);
+	printf("\n");
+}
+
+static void
+test_write(void)
+{
+	printf("Debug: test eeprom_write ... ");
+
+	/*
+	 * Write twice, 8 bytes per write
+	 */
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
+		      testbuf, 8);
+	eeprom_write (CFG_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
+		      testbuf, 16);
+	printf("done\n");
+
+	pll_debug(EEPROM_TEST_OFFSET);
+}
+
+int
+do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	char c = '\0';
+	pll_freq_t pll_freq;
+	if (argc < 2) {
+		printf("Usage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++)
+		if (!strcmp(pll_name[pll_freq], argv[1]))
+			break;
+
+	switch (pll_freq) {
+	case PLL_ebc20:
+	case PLL_333:
+	case PLL_4001:
+	case PLL_4002:
+	case PLL_533:
+	case PLL_600:
+		EEPROM_ALTER_FREQ(pll_freq);
+		break;
+
+	case PLL_666:		/* not support */
+		printf("Choose this option will result in a boot failure."
+		       "\nContinue? (Y/N): ");
+
+		c = getc(); putc('\n');
+
+		if ((c == 'y') || (c == 'Y')) {
+			EEPROM_ALTER_FREQ(pll_freq);
+			break;
+		}
+		goto ret;
+
+	case RCONF:
+		pll_debug(EEPROM_CONF_OFFSET);
+		goto ret;
+	case WTEST:
+		printf("DEBUG: write test\n");
+		test_write();
+		goto ret;
+
+	default:
+		printf("Invalid options"
+		       "\n\nUsage: \n%s\n", cmdtp->usage);
+		goto ret;
+	}
+
+	printf("PLL set to %s, "
+	       "reset the board to take effect\n", pll_name[pll_freq]);
+
+	PLL_DEBUG;
+ret:
+	return 0;
+}
+
+U_BOOT_CMD(
+	pllalter, CFG_MAXARGS, 1,        do_pll_alter,
+	"pllalter- change pll frequence \n",
+	"pllalter <selection>      - change pll frequence \n\n\
+	** New freq take effect after reset. ** \n\
+	----------------------------------------------\n\
+	PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	Same as PLL_333	\n\
+	\t	except          \n\
+	\t	EBC: 20 MHz     \n\
+	----------------------------------------------\n\
+	PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 666 MHz  \n\
+	\t	CPU: 333 MHz  \n\
+	\t	PLB: 166 MHz  \n\
+	\t	OPB: 83 MHz   \n\
+	\t	DDR: 83 MHz   \n\
+	------------------------------------------------\n\
+	PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 133 MHz  \n\
+	\t	OPB: 66  MHz  \n\
+	\t	DDR: 133 MHz  \n\
+	------------------------------------------------\n\
+	PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 800 MHz  \n\
+	\t	CPU: 400 MHz  \n\
+	\t	PLB: 200 MHz  \n\
+	\t	OPB: 100 MHz  \n\
+	\t	DDR: 200 MHz  \n\
+	----------------------------------------------\n\
+	PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1066 MHz  \n\
+	\t	CPU: 533  MHz  \n\
+	\t	PLB: 177  MHz  \n\
+	\t	OPB: 88   MHz  \n\
+	\t	DDR: 177  MHz  \n\
+	----------------------------------------------\n\
+	PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1200 MHz  \n\
+	\t	CPU: 600  MHz  \n\
+	\t	PLB: 200  MHz  \n\
+	\t	OPB: 100  MHz  \n\
+	\t	DDR: 200  MHz  \n\
+	----------------------------------------------\n\
+	PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\
+	\t	VCO: 1333 MHz  \n\
+	\t	CPU: 666  MHz  \n\
+	\t	PLB: 166  MHz  \n\
+	\t	OPB: 83   MHz  \n\
+	\t	DDR: 166  MHz  \n\
+	-----------------------------------------------\n\
+	RCONF: Read current eeprom configuration.      \n\
+	-----------------------------------------------\n\
+	WTEST: Test EEPROM write with predefined values\n\
+	-----------------------------------------------\n"
+	);
+
+#endif	/* (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
diff --git a/board/amcc/makalu/config.mk b/board/amcc/makalu/config.mk
new file mode 100644
index 0000000..a46b197
--- /dev/null
+++ b/board/amcc/makalu/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFA0000
diff --git a/board/amcc/makalu/init.S b/board/amcc/makalu/init.S
new file mode 100644
index 0000000..57c1774
--- /dev/null
+++ b/board/amcc/makalu/init.S
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Based on code provided from Senao and AMCC
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#define mtsdram_as(reg, value)	 	\
+	addi    r4,0,reg	;     	\
+	mtdcr   memcfga,r4	;	\
+	addis   r4,0,value@h 	;	\
+	ori     r4,r4,value@l	;	\
+	mtdcr   memcfgd,r4	;
+
+	.globl  ext_bus_cntlr_init
+ext_bus_cntlr_init:
+
+	/*
+	 * DDR2 setup
+	 */
+
+	/* Following the DDR Core Manual, here is the initialization */
+
+	/* Step 1 */
+
+	/* Step 2 */
+
+	/* Step 3 */
+
+	/* base=00000000, size=128MByte (5), mode=2 (n*10*4) */
+	mtsdram_as(SDRAM_MB0CF, 0x00005201);
+
+	/* base=08000000, size=128MByte (5), mode=2 (n*10*4) */
+	mtsdram_as(SDRAM_MB1CF, (0x08000000 >> 3) | 0x5201);
+
+	/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+	mtsdram_as(SDRAM_CLKTR,0x80000000);
+
+	/* Refresh Time register (0x30) Refresh every 7.8125uS */
+	mtsdram_as(SDRAM_RTR, 0x06180000);
+
+	/* SDRAM_SDTR1 */
+	mtsdram_as(SDRAM_SDTR1, 0x80201000);
+
+	/* SDRAM_SDTR2	*/
+	mtsdram_as(SDRAM_SDTR2, 0x32204232);
+
+	/* SDRAM_SDTR3	*/
+	mtsdram_as(SDRAM_SDTR3, 0x080b0d1a);
+
+	mtsdram_as(SDRAM_MMODE, 0x00000442);
+	mtsdram_as(SDRAM_MEMODE, 0x00000404);
+
+	/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
+	mtsdram_as(SDRAM_MCOPT1, 0x04322000);
+
+	/* NOP */
+	mtsdram_as(SDRAM_INITPLR0, 0xa8380000);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR1, 0x81900400);
+	/* EMR2 twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR2, 0x81020000);
+	/* EMR3  twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR3, 0x81030000);
+	/* EMR DLL ENABLE twr = 2tck */
+	mtsdram_as(SDRAM_INITPLR4, 0x81010404);
+	/* MR w/ DLL reset
+	 * Note: 5 is CL.  May need to be changed
+	 */
+	mtsdram_as(SDRAM_INITPLR5, 0x81000542);
+	/* precharge 3 DDR clock cycle */
+	mtsdram_as(SDRAM_INITPLR6, 0x81900400);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR7, 0x8D080000);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram_as(SDRAM_INITPLR8, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR9, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram_as(SDRAM_INITPLR10, 0x8D080000);
+	/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
+	mtsdram_as(SDRAM_INITPLR11, 0x81000442);
+	mtsdram_as(SDRAM_INITPLR12, 0x81010780);
+	mtsdram_as(SDRAM_INITPLR13, 0x81010400);
+	mtsdram_as(SDRAM_INITPLR14, 0x00000000);
+	mtsdram_as(SDRAM_INITPLR15, 0x00000000);
+
+	/* SET MCIF0_CODT   Die Termination On */
+	mtsdram_as(SDRAM_CODT, 0x0080f837);
+	mtsdram_as(SDRAM_MODT0, 0x01800000);
+#if 0 /* test-only: not sure if 0 is ok when 2nd bank is used */
+	mtsdram_as(SDRAM_MODT1, 0x00000000);
+#endif
+
+	mtsdram_as(SDRAM_WRDTR, 0x00000000);
+
+	/* SDRAM0_MCOPT2 (0X21) Start initialization */
+	mtsdram_as(SDRAM_MCOPT2, 0x20000000);
+
+	/* Step 5 */
+	lis     r3,0x1	/* 400000 =  wait 100ms */
+	mtctr   r3
+
+pll_wait:
+	bdnz	pll_wait
+
+	/* Step 6 */
+
+	/* SDRAM_DLCR */
+	mtsdram_as(SDRAM_DLCR, 0x030000a5);
+
+	/* SDRAM_RDCC */
+	mtsdram_as(SDRAM_RDCC, 0x40000000);
+
+	/* SDRAM_RQDC */
+	mtsdram_as(SDRAM_RQDC, 0x80000038);
+
+	/* SDRAM_RFDC */
+	mtsdram_as(SDRAM_RFDC, 0x00000209);
+
+	/* Enable memory controller */
+	mtsdram_as(SDRAM_MCOPT2, 0x28000000);
+
+	blr
diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c
new file mode 100644
index 0000000..15e51f4
--- /dev/null
+++ b/board/amcc/makalu/makalu.c
@@ -0,0 +1,352 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <ppc405.h>
+#include <libfdt.h>
+#include <asm/processor.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#include <asm/4xx_pcie.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*
+ * Board early initialization function
+ */
+int board_early_init_f (void)
+{
+	u32 val;
+
+	/*--------------------------------------------------------------------+
+	 | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board.
+	 +--------------------------------------------------------------------+
+	+---------------------------------------------------------------------+
+	|Interrupt| Source                            | Pol.  | Sensi.| Crit. |
+	+---------+-----------------------------------+-------+-------+-------+
+	| IRQ 00  | UART0                             | High  | Level | Non   |
+	| IRQ 01  | UART1                             | High  | Level | Non   |
+	| IRQ 02  | IIC0                              | High  | Level | Non   |
+	| IRQ 03  | TBD                               | High  | Level | Non   |
+	| IRQ 04  | TBD                               | High  | Level | Non   |
+	| IRQ 05  | EBM                               | High  | Level | Non   |
+	| IRQ 06  | BGI                               | High  | Level | Non   |
+	| IRQ 07  | IIC1                              | Rising| Edge  | Non   |
+	| IRQ 08  | SPI                               | High  | Lvl/ed| Non   |
+	| IRQ 09  | External IRQ 0 - (PCI-Express)    | pgm H | Pgm   | Non   |
+	| IRQ 10  | MAL TX EOB                        | High  | Level | Non   |
+	| IRQ 11  | MAL RX EOB                        | High  | Level | Non   |
+	| IRQ 12  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
+	| IRQ 13  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
+	| IRQ 14  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
+	| IRQ 15  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
+	| IRQ 16  | PCIE0 AL                          | high  | Level | Non   |
+	| IRQ 17  | PCIE0 VPD access                  | rising| Edge  | Non   |
+	| IRQ 18  | PCIE0 hot reset request           | rising| Edge  | Non   |
+	| IRQ 19  | PCIE0 hot reset request           | faling| Edge  | Non   |
+	| IRQ 20  | PCIE0 TCR                         | High  | Level | Non   |
+	| IRQ 21  | PCIE0 MSI level0                  | High  | Level | Non   |
+	| IRQ 22  | PCIE0 MSI level1                  | High  | Level | Non   |
+	| IRQ 23  | Security EIP-94                   | High  | Level | Non   |
+	| IRQ 24  | EMAC0 interrupt                   | High  | Level | Non   |
+	| IRQ 25  | EMAC1 interrupt                   | High  | Level | Non   |
+	| IRQ 26  | PCIE0 MSI level2                  | High  | Level | Non   |
+	| IRQ 27  | External IRQ 4                    | pgm H | Pgm   | Non   |
+	| IRQ 28  | UIC2 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 29  | UIC2 Critical Interrupt           | High  | Level | Crit. |
+	| IRQ 30  | UIC1 Non-critical Int.            | High  | Level | Non   |
+	| IRQ 31  | UIC1 Critical Interrupt           | High  | Level | Crit. |
+	|----------------------------------------------------------------------
+	| IRQ 32  | MAL Serr                          | High  | Level | Non   |
+	| IRQ 33  | MAL Txde                          | High  | Level | Non   |
+	| IRQ 34  | MAL Rxde                          | High  | Level | Non   |
+	| IRQ 35  | PCIE0 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 36  | PCIE0 DCR Error                   | High  | Level | Non   |
+	| IRQ 37  | EBC                               | High  |Lvl Edg| Non   |
+	| IRQ 38  | NDFC                              | High  | Level | Non   |
+	| IRQ 39  | GPT Compare Timer 8               | Risin | Edge  | Non   |
+	| IRQ 40  | GPT Compare Timer 9               | Risin | Edge  | Non   |
+	| IRQ 41  | PCIE1 AL                          | high  | Level | Non   |
+	| IRQ 42  | PCIE1 VPD access                  | rising| edge  | Non   |
+	| IRQ 43  | PCIE1 hot reset request           | rising| Edge  | Non   |
+	| IRQ 44  | PCIE1 hot reset request           | faling| Edge  | Non   |
+	| IRQ 45  | PCIE1 TCR                         | High  | Level | Non   |
+	| IRQ 46  | PCIE1 bus master VC0              |falling| Edge  | Non   |
+	| IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
+	| IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
+	| IRQ 49  | Ext. IRQ 7                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 50  | Ext. IRQ 8 -                      |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 51  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 52  | GPT Compare Timer 5               | high  | Edge  | Non   |
+	| IRQ 53  | GPT Compare Timer 6               | high  | Edge  | Non   |
+	| IRQ 54  | GPT Compare Timer 7               | high  | Edge  | Non   |
+	| IRQ 55  | Serial ROM                        | High  | Level | Non   |
+	| IRQ 56  | GPT Decrement Pulse               | High  | Level | Non   |
+	| IRQ 57  | Ext. IRQ 2                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 58  | Ext. IRQ 5                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 59  | Ext. IRQ 6                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 60  | EMAC0 Wake-up                     | High  | Level | Non   |
+	| IRQ 61  | Ext. IRQ 1                        |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 62  | EMAC1 Wake-up                     | High  | Level | Non   |
+	|----------------------------------------------------------------------
+	| IRQ 64  | PE0 AL                            | High  | Level | Non   |
+	| IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 68  | PE0 TCR                           | High  | Level | Non   |
+	| IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
+	| IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 72  | PE1 AL                            | High  | Level | Non   |
+	| IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 76  | PE1 TCR                           | High  | Level | Non   |
+	| IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
+	| IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 80  | PE2 AL                            | High  | Level | Non   |
+	| IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 84  | PE2 TCR                           | High  | Level | Non   |
+	| IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
+	| IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
+	| IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
+	| IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
+	|---------------------------------------------------------------------
+	+---------+-----------------------------------+-------+-------+------*/
+	/*--------------------------------------------------------------------+
+	 | Initialise UIC registers.  Clear all interrupts.  Disable all
+	 | interrupts.
+	 | Set critical interrupt values.  Set interrupt polarities.  Set
+	 | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
+	 | interrupts again.
+	 +-------------------------------------------------------------------*/
+
+	mtdcr (uic2sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic2er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic2cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic2pr, 0xf7ffffff);	/* Set Interrupt Polarities */
+	mtdcr (uic2tr, 0x01e1fff8);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic2vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic2sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic2sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic1sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic1er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic1cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic1pr, 0xfffac785);	/* Set Interrupt Polarities */
+	mtdcr (uic1tr, 0x001d0040);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic1vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic1sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic1sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic0sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic0er, 0x0000000a);	/* Disable all interrupts */
+					/* Except cascade UIC0 and UIC1 */
+	mtdcr (uic0cr, 0x00000000);	/* Set Critical / Non Critical interrupts */
+	mtdcr (uic0pr, 0xffbfefef);	/* Set Interrupt Polarities */
+	mtdcr (uic0tr, 0x00007000);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic0vr, 0x00000001);	/* Set Vect base=0,INT31 Highest priority */
+	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
+
+	/*
+	 * Note: Some cores are still in reset when the chip starts, so
+	 * take them out of reset
+	 */
+	mtsdr(SDR0_SRST, 0);
+
+	/* Reset PCIe slots */
+	gpio_write_bit(CFG_GPIO_PCIE_RST, 0);
+	udelay(100);
+	gpio_write_bit(CFG_GPIO_PCIE_RST, 1);
+
+	/*
+	 * Configure PFC (Pin Function Control) registers
+	 * -> Enable USB
+	 */
+	val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ;
+	mtsdr(SDR0_PFC1, val);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+#ifdef CFG_ENV_IS_IN_FLASH
+	/* Monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      -CFG_MONITOR_LEN,
+		      0xffffffff,
+		      &flash_info[0]);
+#endif
+
+	return 0;
+}
+
+int checkboard (void)
+{
+	char *s = getenv("serial#");
+
+	printf("Board: Makalu - AMCC PPC405EX Evaluation Board");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *      Different boards may wish to customize the pci controller structure
+ *      (add regions, override default access routines, etc) or perform
+ *      certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller * hose )
+{
+	return 0;
+}
+#endif  /* defined(CONFIG_PCI) */
+
+#ifdef CONFIG_PCI
+static struct pci_controller pcie_hose[2] = {{0},{0}};
+
+void pcie_setup_hoses(int busno)
+{
+	struct pci_controller *hose;
+	int i, bus;
+	int ret = 0;
+	bus = busno;
+	char *env;
+	unsigned int delay;
+
+	for (i = 0; i < 2; i++) {
+
+		if (is_end_point(i))
+			ret = ppc4xx_init_pcie_endport(i);
+		else
+			ret = ppc4xx_init_pcie_rootport(i);
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
+			continue;
+		}
+
+		hose = &pcie_hose[i];
+		hose->first_busno = bus;
+		hose->last_busno = bus;
+		hose->current_busno = bus;
+
+		/* setup mem resource */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			       CFG_PCIE_MEMSIZE,
+			       PCI_REGION_MEM);
+		hose->region_count = 1;
+		pci_register_hose(hose);
+
+		if (is_end_point(i)) {
+		    	ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+		    	 */
+		} else {
+		    	ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv ("pciscandelay");
+		    	if (env != NULL) {
+			    	delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
+
+		    	/*
+		     	 * Config access can only go down stream
+		     	 */
+		    	hose->last_busno = pci_hose_scan(hose);
+		    	bus = hose->last_busno + 1;
+		}
+	}
+}
+#endif
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/amcc/makalu/memory.c b/board/amcc/makalu/memory.c
new file mode 100644
index 0000000..b03b60b
--- /dev/null
+++ b/board/amcc/makalu/memory.c
@@ -0,0 +1,188 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+void sdram_init(void)
+{
+	return;
+}
+
+long int initdram(int board_type)
+{
+	/*
+	 * Same as on Kilauea, Makalu generates exception 0x200
+	 * (machine check) after trap_init() in board_init_f,
+	 * when SDRAM is initialized here (late) and d-cache is
+	 * used earlier as INIT_RAM.
+	 * So for now, initialize DDR2 in init.S very early and
+	 * also use it for INIT_RAM. Then this exception doesn't
+	 * occur.
+	 */
+#if 0
+	u32 val;
+
+	/* base=00000000, size=128MByte (5), mode=2 (n*10*4) */
+	mtsdram(SDRAM_MB0CF, 0x00005201);
+
+	/* SET SDRAM_MB1CF - Not enabled */
+	mtsdram(SDRAM_MB1CF, 0x00000000);
+
+	/* SET SDRAM_MB2CF  - Not enabled */
+	mtsdram(SDRAM_MB2CF, 0x00000000);
+
+	/* SET SDRAM_MB3CF  - Not enabled */
+	mtsdram(SDRAM_MB3CF, 0x00000000);
+
+	/* SDRAM_CLKTR: Adv Addr clock by 90 deg */
+	mtsdram(SDRAM_CLKTR, 0x80000000);
+
+	/* Refresh Time register (0x30) Refresh every 7.8125uS */
+	mtsdram(SDRAM_RTR, 0x06180000);
+
+	/* SDRAM_SDTR1 */
+	mtsdram(SDRAM_SDTR1, 0x80201000);
+
+	/* SDRAM_SDTR2	*/
+	mtsdram(SDRAM_SDTR2, 0x32204232);
+
+	/* SDRAM_SDTR3	*/
+	mtsdram(SDRAM_SDTR3, 0x080b0d1a);
+
+	mtsdram(SDRAM_MMODE, 0x00000442);
+	mtsdram(SDRAM_MEMODE, 0x00000404);
+
+	/* SDRAM0_MCOPT1 (0X20) No ECC Gen */
+	mtsdram(SDRAM_MCOPT1, 0x04322000);
+
+	/* NOP */
+	mtsdram(SDRAM_INITPLR0, 0xa8380000);
+	/* precharge 3 DDR clock cycle */
+	mtsdram(SDRAM_INITPLR1, 0x81900400);
+	/* EMR2 twr = 2tck */
+	mtsdram(SDRAM_INITPLR2, 0x81020000);
+	/* EMR3  twr = 2tck */
+	mtsdram(SDRAM_INITPLR3, 0x81030000);
+	/* EMR DLL ENABLE twr = 2tck */
+	mtsdram(SDRAM_INITPLR4, 0x81010404);
+	/* MR w/ DLL reset
+	 * Note: 5 is CL.  May need to be changed
+	 */
+	mtsdram(SDRAM_INITPLR5, 0x81000542);
+	/* precharge 3 DDR clock cycle */
+	mtsdram(SDRAM_INITPLR6, 0x81900400);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram(SDRAM_INITPLR7, 0x8D080000);
+	/* Auto-refresh trfc = 26tck */
+	mtsdram(SDRAM_INITPLR8, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram(SDRAM_INITPLR9, 0x8D080000);
+	/* Auto-refresh */
+	mtsdram(SDRAM_INITPLR10, 0x8D080000);
+	/* MRS - normal operation; wait 2 cycle (set wait to tMRD) */
+	mtsdram(SDRAM_INITPLR11, 0x81000442);
+	mtsdram(SDRAM_INITPLR12, 0x81010780);
+	mtsdram(SDRAM_INITPLR13, 0x81010400);
+	mtsdram(SDRAM_INITPLR14, 0x00000000);
+	mtsdram(SDRAM_INITPLR15, 0x00000000);
+
+	/* SET MCIF0_CODT   Die Termination On */
+	mtsdram(SDRAM_CODT, 0x0080f837);
+	mtsdram(SDRAM_MODT0, 0x01800000);
+	mtsdram(SDRAM_MODT1, 0x00000000);
+
+	mtsdram(SDRAM_WRDTR, 0x00000000);
+
+	/* SDRAM0_MCOPT2 (0X21) Start initialization */
+	mtsdram(SDRAM_MCOPT2, 0x20000000);
+
+	/* Step 5 */
+	do {
+		mfsdram(SDRAM_MCSTAT, val);
+	} while ((val & SDRAM_MCSTAT_MIC_COMP) != SDRAM_MCSTAT_MIC_COMP);
+
+	/* Step 6 */
+
+	/* SDRAM_DLCR */
+	mtsdram(SDRAM_DLCR, 0x030000a5);
+
+	/* SDRAM_RDCC */
+	mtsdram(SDRAM_RDCC, 0x40000000);
+
+	/* SDRAM_RQDC */
+	mtsdram(SDRAM_RQDC, 0x80000038);
+
+	/* SDRAM_RFDC */
+	mtsdram(SDRAM_RFDC, 0x00000209);
+
+	/* Enable memory controller */
+	mfsdram(SDRAM_MCOPT2, val);
+	val |= SDRAM_MCOPT2_DCEN_ENABLE;
+	mtsdram(SDRAM_MCOPT2, val);
+#endif
+	return (CFG_MBYTES_SDRAM << 20);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+    printf ("testdram\n");
+#if defined (CONFIG_NAND_U_BOOT)
+    return 0;
+#endif
+	uint *pstart = (uint *) 0x00000000;
+	uint *pend = (uint *) 0x00001000;
+	uint *p;
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0xaaaaaaaa;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+
+	for (p = pstart; p < pend; p++) {
+		*p = 0x55555555;
+	}
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+#if !defined (CONFIG_NAND_SPL)
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+#endif
+			return 1;
+		}
+	}
+#if !defined (CONFIG_NAND_SPL)
+	printf ("SDRAM test passed!!!\n");
+#endif
+	return 0;
+}
+#endif
diff --git a/board/amcc/makalu/u-boot.lds b/board/amcc/makalu/u-boot.lds
new file mode 100644
index 0000000..390b3f3
--- /dev/null
+++ b/board/amcc/makalu/u-boot.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+/* To compile successfully, uncomment the following section.
+ * To go in ram, remove the section.
+ * Added by SunHe.
+ */
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/amcc/ocotea/u-boot.lds b/board/amcc/ocotea/u-boot.lds
index 316fee8..0daca70 100644
--- a/board/amcc/ocotea/u-boot.lds
+++ b/board/amcc/ocotea/u-boot.lds
@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/ocotea/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
index 5fe3af9..ff6ae66 100644
--- a/board/amcc/sequoia/init.S
+++ b/board/amcc/sequoia/init.S
@@ -20,57 +20,9 @@
  */
 
 #include <ppc_asm.tmpl>
+#include <asm-ppc/mmu.h>
 #include <config.h>
 
-/* General */
-#define TLB_VALID   0x00000200
-#define _256M       0x10000000
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_8M       0x00000060
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
 /**************************************************************************
  * TLB TABLE
  *
@@ -98,7 +50,11 @@ tlbtab:
 #endif
 
 	/* TLB-entry for DDR SDRAM (Up to 2GB) */
+#ifdef CONFIG_4xx_DCACHE
+	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G)
+#else
 	tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+#endif
 
 #ifdef CFG_INIT_RAM_DCACHE
 	/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
index 78e2cb4..5e93f6c 100644
--- a/board/amcc/sequoia/sdram.c
+++ b/board/amcc/sequoia/sdram.c
@@ -33,343 +33,11 @@
 #include <asm/io.h>
 #include <ppc440.h>
 
-#include "sdram.h"
-
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
-	defined(CONFIG_DDR_DATA_EYE)
-/*-----------------------------------------------------------------------------+
- * wait_for_dlllock.
- +----------------------------------------------------------------------------*/
-static int wait_for_dlllock(void)
-{
-	unsigned long val;
-	int wait = 0;
-
-	/* -----------------------------------------------------------+
-	 * Wait for the DCC master delay line to finish calibration
-	 * ----------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_17);
-	val = DDR0_17_DLLLOCKREG_UNLOCKED;
-
-	while (wait != 0xffff) {
-		val = mfdcr(ddrcfgd);
-		if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
-			/* dlllockreg bit on */
-			return 0;
-		else
-			wait++;
-	}
-	debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
-	debug("Waiting for dlllockreg bit to raise\n");
-
-	return -1;
-}
-#endif
-
-#if defined(CONFIG_DDR_DATA_EYE)
 /*-----------------------------------------------------------------------------+
- * wait_for_dram_init_complete.
- +----------------------------------------------------------------------------*/
-int wait_for_dram_init_complete(void)
-{
-	unsigned long val;
-	int wait = 0;
-
-	/* --------------------------------------------------------------+
-	 * Wait for 'DRAM initialization complete' bit in status register
-	 * -------------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_00);
-
-	while (wait != 0xffff) {
-		val = mfdcr(ddrcfgd);
-		if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
-			/* 'DRAM initialization complete' bit */
-			return 0;
-		else
-			wait++;
-	}
-
-	debug("DRAM initialization complete bit in status register did not rise\n");
-
-	return -1;
-}
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-/*-----------------------------------------------------------------------------+
- * denali_core_search_data_eye.
- +----------------------------------------------------------------------------*/
-void denali_core_search_data_eye(unsigned long memory_size)
-{
-	int k, j;
-	u32 val;
-	u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
-	u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
-	u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
-	u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
-	volatile u32 *ram_pointer;
-	u32 test[NUM_TRIES] = {
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
-	ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
-
-	for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
-		/*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
-
-		/* -----------------------------------------------------------+
-		 * De-assert 'start' parameter.
-		 * ----------------------------------------------------------*/
-		mtdcr(ddrcfga, DDR0_02);
-		val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
-		mtdcr(ddrcfgd, val);
-
-		/* -----------------------------------------------------------+
-		 * Set 'wr_dqs_shift'
-		 * ----------------------------------------------------------*/
-		mtdcr(ddrcfga, DDR0_09);
-		val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
-			| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
-		mtdcr(ddrcfgd, val);
-
-		/* -----------------------------------------------------------+
-		 * Set 'dqs_out_shift' = wr_dqs_shift + 32
-		 * ----------------------------------------------------------*/
-		dqs_out_shift = wr_dqs_shift + 32;
-		mtdcr(ddrcfga, DDR0_22);
-		val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
-			| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
-		mtdcr(ddrcfgd, val);
-
-		passing_cases = 0;
-
-		for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
-			/*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
-			/* -----------------------------------------------------------+
-			 * Set 'dll_dqs_delay_X'.
-			 * ----------------------------------------------------------*/
-			/* dll_dqs_delay_0 */
-			mtdcr(ddrcfga, DDR0_17);
-			val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
-				| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
-			mtdcr(ddrcfgd, val);
-			/* dll_dqs_delay_1 to dll_dqs_delay_4 */
-			mtdcr(ddrcfga, DDR0_18);
-			val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
-				| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
-				| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
-				| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
-				| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
-			mtdcr(ddrcfgd, val);
-			/* dll_dqs_delay_5 to dll_dqs_delay_8 */
-			mtdcr(ddrcfga, DDR0_19);
-			val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
-				| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
-				| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
-				| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
-				| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
-			mtdcr(ddrcfgd, val);
-
-			ppcMsync();
-			ppcMbar();
-
-			/* -----------------------------------------------------------+
-			 * Assert 'start' parameter.
-			 * ----------------------------------------------------------*/
-			mtdcr(ddrcfga, DDR0_02);
-			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
-			mtdcr(ddrcfgd, val);
-
-			ppcMsync();
-			ppcMbar();
-
-			/* -----------------------------------------------------------+
-			 * Wait for the DCC master delay line to finish calibration
-			 * ----------------------------------------------------------*/
-			if (wait_for_dlllock() != 0) {
-				printf("dlllock did not occur !!!\n");
-				printf("denali_core_search_data_eye!!!\n");
-				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
-				       wr_dqs_shift, dll_dqs_delay_X);
-				hang();
-			}
-			ppcMsync();
-			ppcMbar();
-
-			if (wait_for_dram_init_complete() != 0) {
-				printf("dram init complete did not occur !!!\n");
-				printf("denali_core_search_data_eye!!!\n");
-				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
-				       wr_dqs_shift, dll_dqs_delay_X);
-				hang();
-			}
-			udelay(100);  /* wait 100us to ensure init is really completed !!! */
-
-			/* write values */
-			for (j=0; j<NUM_TRIES; j++) {
-				ram_pointer[j] = test[j];
-
-				/* clear any cache at ram location */
-				__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-			}
-
-			/* read values back */
-			for (j=0; j<NUM_TRIES; j++) {
-				for (k=0; k<NUM_READS; k++) {
-					/* clear any cache at ram location */
-					__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
-					if (ram_pointer[j] != test[j])
-						break;
-				}
-
-				/* read error */
-				if (k != NUM_READS)
-					break;
-			}
-
-			/* See if the dll_dqs_delay_X value passed.*/
-			if (j < NUM_TRIES) {
-				/* Failed */
-				passing_cases = 0;
-				/* break; */
-			} else {
-				/* Passed */
-				if (passing_cases == 0)
-					dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
-				passing_cases++;
-				if (passing_cases >= max_passing_cases) {
-					max_passing_cases = passing_cases;
-					wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
-					dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
-					dll_dqs_delay_X_end_window = dll_dqs_delay_X;
-				}
-			}
-
-			/* -----------------------------------------------------------+
-			 * De-assert 'start' parameter.
-			 * ----------------------------------------------------------*/
-			mtdcr(ddrcfga, DDR0_02);
-			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
-			mtdcr(ddrcfgd, val);
-
-		} /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
-
-	} /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
-
-	/* -----------------------------------------------------------+
-	 * Largest passing window is now detected.
-	 * ----------------------------------------------------------*/
-
-	/* Compute dll_dqs_delay_X value */
-	dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
-	wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
-
-	debug("DQS calibration - Window detected:\n");
-	debug("max_passing_cases = %d\n", max_passing_cases);
-	debug("wr_dqs_shift      = %d\n", wr_dqs_shift);
-	debug("dll_dqs_delay_X   = %d\n", dll_dqs_delay_X);
-	debug("dll_dqs_delay_X window = %d - %d\n",
-	       dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
-
-	/* -----------------------------------------------------------+
-	 * De-assert 'start' parameter.
-	 * ----------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_02);
-	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
-	mtdcr(ddrcfgd, val);
-
-	/* -----------------------------------------------------------+
-	 * Set 'wr_dqs_shift'
-	 * ----------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_09);
-	val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
-		| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_09=0x%08lx\n", val);
-
-	/* -----------------------------------------------------------+
-	 * Set 'dqs_out_shift' = wr_dqs_shift + 32
-	 * ----------------------------------------------------------*/
-	dqs_out_shift = wr_dqs_shift + 32;
-	mtdcr(ddrcfga, DDR0_22);
-	val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
-		| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_22=0x%08lx\n", val);
-
-	/* -----------------------------------------------------------+
-	 * Set 'dll_dqs_delay_X'.
-	 * ----------------------------------------------------------*/
-	/* dll_dqs_delay_0 */
-	mtdcr(ddrcfga, DDR0_17);
-	val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
-		| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_17=0x%08lx\n", val);
-
-	/* dll_dqs_delay_1 to dll_dqs_delay_4 */
-	mtdcr(ddrcfga, DDR0_18);
-	val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
-		| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
-		| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
-		| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
-		| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_18=0x%08lx\n", val);
-
-	/* dll_dqs_delay_5 to dll_dqs_delay_8 */
-	mtdcr(ddrcfga, DDR0_19);
-	val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
-		| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
-		| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
-		| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
-		| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
-	mtdcr(ddrcfgd, val);
-	debug("DDR0_19=0x%08lx\n", val);
-
-	/* -----------------------------------------------------------+
-	 * Assert 'start' parameter.
-	 * ----------------------------------------------------------*/
-	mtdcr(ddrcfga, DDR0_02);
-	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
-	mtdcr(ddrcfgd, val);
-
-	ppcMsync();
-	ppcMbar();
-
-	/* -----------------------------------------------------------+
-	 * Wait for the DCC master delay line to finish calibration
-	 * ----------------------------------------------------------*/
-	if (wait_for_dlllock() != 0) {
-		printf("dlllock did not occur !!!\n");
-		hang();
-	}
-	ppcMsync();
-	ppcMbar();
-
-	if (wait_for_dram_init_complete() != 0) {
-		printf("dram init complete did not occur !!!\n");
-		hang();
-	}
-	udelay(100);  /* wait 100us to ensure init is really completed !!! */
-}
-#endif /* CONFIG_DDR_DATA_EYE */
+ * Prototypes
+ *-----------------------------------------------------------------------------*/
+extern int denali_wait_for_dlllock(void);
+extern void denali_core_search_data_eye(void);
 
 #if defined(CONFIG_NAND_SPL)
 /* Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
@@ -428,14 +96,14 @@ long int initdram (int board_type)
 	mtsdram(DDR0_44, 0x00000003);
 	mtsdram(DDR0_02, 0x00000001);
 
-	wait_for_dlllock();
+	denali_wait_for_dlllock();
 #endif /* #ifndef CONFIG_NAND_U_BOOT */
 
 #ifdef CONFIG_DDR_DATA_EYE
 	/* -----------------------------------------------------------+
 	 * Perform data eye search if requested.
 	 * ----------------------------------------------------------*/
-	denali_core_search_data_eye(CFG_MBYTES_SDRAM << 20);
+	denali_core_search_data_eye();
 #endif
 
 	return (CFG_MBYTES_SDRAM << 20);
diff --git a/board/amcc/sequoia/sdram.h b/board/amcc/sequoia/sdram.h
deleted file mode 100644
index 7f847aa..0000000
--- a/board/amcc/sequoia/sdram.h
+++ /dev/null
@@ -1,505 +0,0 @@
-/*
- * (C) Copyright 2006
- * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SPD_SDRAM_DENALI_H_
-#define _SPD_SDRAM_DENALI_H_
-
-#define ppcMsync	sync
-#define ppcMbar		eieio
-
-/* General definitions */
-#define MAX_SPD_BYTE        128         /* highest SPD byte # to read */
-#define DENALI_REG_NUMBER   45          /* 45 Regs in PPC440EPx Denali Core */
-#define SUPPORTED_DIMMS_NB  7           /* Number of supported DIMM modules types */
-#define SDRAM_NONE          0           /* No DIMM detected in Slot */
-#define MAXRANKS            2           /* 2 ranks maximum */
-
-/* Supported PLB Frequencies */
-#define PLB_FREQ_133MHZ     133333333
-#define PLB_FREQ_152MHZ     152000000
-#define PLB_FREQ_160MHZ     160000000
-#define PLB_FREQ_166MHZ     166666666
-
-/* Denali Core Registers */
-#define SDRAM_DCR_BASE 0x10
-
-#define DDR_DCR_BASE 0x10
-#define ddrcfga  (DDR_DCR_BASE+0x0)   /* DDR configuration address reg */
-#define ddrcfgd  (DDR_DCR_BASE+0x1)   /* DDR configuration data reg    */
-
-/*-----------------------------------------------------------------------------+
-  | Values for ddrcfga register - indirect addressing of these regs
-  +-----------------------------------------------------------------------------*/
-
-#define DDR0_00                         0x00
-#define DDR0_00_INT_ACK_MASK              0x7F000000 /* Write only */
-#define DDR0_00_INT_ACK_ALL               0x7F000000
-#define DDR0_00_INT_ACK_ENCODE(n)           ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_00_INT_ACK_DECODE(n)           ((((unsigned long)(n))>>24)&0x7F)
-/* Status */
-#define DDR0_00_INT_STATUS_MASK           0x00FF0000 /* Read only */
-/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT0           0x00010000
-/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT1           0x00020000
-/* Bit2. Single correctable ECC event detected */
-#define DDR0_00_INT_STATUS_BIT2           0x00040000
-/* Bit3. Multiple correctable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT3           0x00080000
-/* Bit4. Single uncorrectable ECC event detected. */
-#define DDR0_00_INT_STATUS_BIT4           0x00100000
-/* Bit5. Multiple uncorrectable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT5           0x00200000
-/* Bit6. DRAM initialization complete. */
-#define DDR0_00_INT_STATUS_BIT6           0x00400000
-/* Bit7. Logical OR of all lower bits. */
-#define DDR0_00_INT_STATUS_BIT7           0x00800000
-
-#define DDR0_00_INT_STATUS_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_00_INT_STATUS_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_00_DLL_INCREMENT_MASK        0x00007F00
-#define DDR0_00_DLL_INCREMENT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_00_DLL_INCREMENT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_00_DLL_START_POINT_MASK      0x0000007F
-#define DDR0_00_DLL_START_POINT_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_00_DLL_START_POINT_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-
-#define DDR0_01                         0x01
-#define DDR0_01_PLB0_DB_CS_LOWER_MASK     0x1F000000
-#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n)  ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_01_PLB0_DB_CS_UPPER_MASK     0x001F0000
-#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n)  ((((unsigned long)(n))&0x1F)<<16)
-#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n)  ((((unsigned long)(n))>>16)&0x1F)
-#define DDR0_01_OUT_OF_RANGE_TYPE_MASK    0x00000700 /* Read only */
-#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n)               ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n)               ((((unsigned long)(n))>>8)&0x7)
-#define DDR0_01_INT_MASK_MASK             0x000000FF
-#define DDR0_01_INT_MASK_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_01_INT_MASK_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
-#define DDR0_01_INT_MASK_ALL_ON           0x000000FF
-#define DDR0_01_INT_MASK_ALL_OFF          0x00000000
-
-#define DDR0_02                         0x02
-#define DDR0_02_MAX_CS_REG_MASK           0x02000000 /* Read only */
-#define DDR0_02_MAX_CS_REG_ENCODE(n)        ((((unsigned long)(n))&0x2)<<24)
-#define DDR0_02_MAX_CS_REG_DECODE(n)        ((((unsigned long)(n))>>24)&0x2)
-#define DDR0_02_MAX_COL_REG_MASK          0x000F0000 /* Read only */
-#define DDR0_02_MAX_COL_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<16)
-#define DDR0_02_MAX_COL_REG_DECODE(n)       ((((unsigned long)(n))>>16)&0xF)
-#define DDR0_02_MAX_ROW_REG_MASK          0x00000F00 /* Read only */
-#define DDR0_02_MAX_ROW_REG_ENCODE(n)       ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_02_MAX_ROW_REG_DECODE(n)       ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_02_START_MASK                0x00000001
-#define DDR0_02_START_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_02_START_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
-#define DDR0_02_START_OFF                 0x00000000
-#define DDR0_02_START_ON                  0x00000001
-
-#define DDR0_03                         0x03
-#define DDR0_03_BSTLEN_MASK               0x07000000
-#define DDR0_03_BSTLEN_ENCODE(n)            ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_03_BSTLEN_DECODE(n)            ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_03_CASLAT_MASK               0x00070000
-#define DDR0_03_CASLAT_ENCODE(n)            ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_03_CASLAT_DECODE(n)            ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_03_CASLAT_LIN_MASK           0x00000F00
-#define DDR0_03_CASLAT_LIN_ENCODE(n)        ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_03_CASLAT_LIN_DECODE(n)        ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_03_INITAREF_MASK             0x0000000F
-#define DDR0_03_INITAREF_ENCODE(n)          ((((unsigned long)(n))&0xF)<<0)
-#define DDR0_03_INITAREF_DECODE(n)          ((((unsigned long)(n))>>0)&0xF)
-
-#define DDR0_04                         0x04
-#define DDR0_04_TRC_MASK                  0x1F000000
-#define DDR0_04_TRC_ENCODE(n)               ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_04_TRC_DECODE(n)               ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_04_TRRD_MASK                 0x00070000
-#define DDR0_04_TRRD_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_04_TRRD_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_04_TRTP_MASK                 0x00000700
-#define DDR0_04_TRTP_ENCODE(n)              ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_04_TRTP_DECODE(n)              ((((unsigned long)(n))>>8)&0x7)
-
-#define DDR0_05                         0x05
-#define DDR0_05_TMRD_MASK                 0x1F000000
-#define DDR0_05_TMRD_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_05_TMRD_DECODE(n)              ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_05_TEMRS_MASK                0x00070000
-#define DDR0_05_TEMRS_ENCODE(n)             ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_05_TEMRS_DECODE(n)             ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_05_TRP_MASK                  0x00000F00
-#define DDR0_05_TRP_ENCODE(n)               ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_05_TRP_DECODE(n)               ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_05_TRAS_MIN_MASK             0x000000FF
-#define DDR0_05_TRAS_MIN_ENCODE(n)          ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_05_TRAS_MIN_DECODE(n)          ((((unsigned long)(n))>>0)&0xFF)
-
-#define DDR0_06                         0x06
-#define DDR0_06_WRITEINTERP_MASK          0x01000000
-#define DDR0_06_WRITEINTERP_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_06_WRITEINTERP_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_06_TWTR_MASK                 0x00070000
-#define DDR0_06_TWTR_ENCODE(n)              ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_06_TWTR_DECODE(n)              ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_06_TDLL_MASK                 0x0000FF00
-#define DDR0_06_TDLL_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_06_TDLL_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
-#define DDR0_06_TRFC_MASK                 0x0000007F
-#define DDR0_06_TRFC_ENCODE(n)              ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_06_TRFC_DECODE(n)              ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_07                         0x07
-#define DDR0_07_NO_CMD_INIT_MASK          0x01000000
-#define DDR0_07_NO_CMD_INIT_ENCODE(n)       ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_07_NO_CMD_INIT_DECODE(n)       ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_07_TFAW_MASK                 0x001F0000
-#define DDR0_07_TFAW_ENCODE(n)              ((((unsigned long)(n))&0x1F)<<16)
-#define DDR0_07_TFAW_DECODE(n)              ((((unsigned long)(n))>>16)&0x1F)
-#define DDR0_07_AUTO_REFRESH_MODE_MASK    0x00000100
-#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
-#define DDR0_07_AREFRESH_MASK             0x00000001
-#define DDR0_07_AREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_07_AREFRESH_DECODE(n)          ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_08                         0x08
-#define DDR0_08_WRLAT_MASK                0x07000000
-#define DDR0_08_WRLAT_ENCODE(n)             ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_08_WRLAT_DECODE(n)             ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_08_TCPD_MASK                 0x00FF0000
-#define DDR0_08_TCPD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_08_TCPD_DECODE(n)              ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_08_DQS_N_EN_MASK             0x00000100
-#define DDR0_08_DQS_N_EN_ENCODE(n)          ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_08_DQS_N_EN_DECODE(n)          ((((unsigned long)(n))>>8)&0x1)
-#define DDR0_08_DDRII_SDRAM_MODE_MASK     0x00000001
-#define DDR0_08_DDRII_ENCODE(n)             ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_08_DDRII_DECODE(n)             ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_09                         0x09
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK  0x1F000000
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_09_RTT_0_MASK                0x00030000
-#define DDR0_09_RTT_0_ENCODE(n)             ((((unsigned long)(n))&0x3)<<16)
-#define DDR0_09_RTT_0_DECODE(n)             ((((unsigned long)(n))>>16)&0x3)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK  0x00007F00
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_09_WR_DQS_SHIFT_MASK         0x0000007F
-#define DDR0_09_WR_DQS_SHIFT_ENCODE(n)      ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_09_WR_DQS_SHIFT_DECODE(n)      ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_10                         0x0A
-#define DDR0_10_WRITE_MODEREG_MASK        0x00010000 /* Write only */
-#define DDR0_10_WRITE_MODEREG_ENCODE(n)     ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_10_WRITE_MODEREG_DECODE(n)     ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_10_CS_MAP_MASK               0x00000300
-#define DDR0_10_CS_MAP_NO_MEM             0x00000000
-#define DDR0_10_CS_MAP_RANK0_INSTALLED    0x00000100
-#define DDR0_10_CS_MAP_RANK1_INSTALLED    0x00000200
-#define DDR0_10_CS_MAP_ENCODE(n)            ((((unsigned long)(n))&0x3)<<8)
-#define DDR0_10_CS_MAP_DECODE(n)            ((((unsigned long)(n))>>8)&0x3)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK  0x0000001F
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
-
-#define DDR0_11                         0x0B
-#define DDR0_11_SREFRESH_MASK             0x01000000
-#define DDR0_11_SREFRESH_ENCODE(n)          ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_11_SREFRESH_DECODE(n)          ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_11_TXSNR_MASK                0x00FF0000
-#define DDR0_11_TXSNR_ENCODE(n)             ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_11_TXSNR_DECODE(n)             ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_11_TXSR_MASK                 0x0000FF00
-#define DDR0_11_TXSR_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_11_TXSR_DECODE(n)              ((((unsigned long)(n))>>8)&0xFF)
-
-#define DDR0_12                         0x0C
-#define DDR0_12_TCKE_MASK                 0x0000007
-#define DDR0_12_TCKE_ENCODE(n)              ((((unsigned long)(n))&0x7)<<0)
-#define DDR0_12_TCKE_DECODE(n)              ((((unsigned long)(n))>>0)&0x7)
-
-#define DDR0_13                         0x0D
-
-#define DDR0_14                         0x0E
-#define DDR0_14_DLL_BYPASS_MODE_MASK      0x01000000
-#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_14_DLL_BYPASS_MODE_DECODE(n)   ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_14_REDUC_MASK                0x00010000
-#define DDR0_14_REDUC_64BITS              0x00000000
-#define DDR0_14_REDUC_32BITS              0x00010000
-#define DDR0_14_REDUC_ENCODE(n)             ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_14_REDUC_DECODE(n)             ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_14_REG_DIMM_ENABLE_MASK      0x00000100
-#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_14_REG_DIMM_ENABLE_DECODE(n)   ((((unsigned long)(n))>>8)&0x1)
-
-#define DDR0_15                         0x0F
-
-#define DDR0_16                         0x10
-
-#define DDR0_17                         0x11
-#define DDR0_17_DLL_DQS_DELAY_0_MASK      0x7F000000
-#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_17_DLLLOCKREG_MASK           0x00010000 /* Read only */
-#define DDR0_17_DLLLOCKREG_LOCKED         0x00010000
-#define DDR0_17_DLLLOCKREG_UNLOCKED       0x00000000
-#define DDR0_17_DLLLOCKREG_ENCODE(n)        ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_17_DLLLOCKREG_DECODE(n)        ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_17_DLL_LOCK_MASK             0x00007F00 /* Read only */
-#define DDR0_17_DLL_LOCK_ENCODE(n)          ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_17_DLL_LOCK_DECODE(n)          ((((unsigned long)(n))>>8)&0x7F)
-
-#define DDR0_18                         0x12
-#define DDR0_18_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
-#define DDR0_18_DLL_DQS_DELAY_4_MASK      0x7F000000
-#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_3_MASK      0x007F0000
-#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_2_MASK      0x00007F00
-#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_1_MASK      0x0000007F
-#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_19                         0x13
-#define DDR0_19_DLL_DQS_DELAY_X_MASK      0x7F7F7F7F
-#define DDR0_19_DLL_DQS_DELAY_8_MASK      0x7F000000
-#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_7_MASK      0x007F0000
-#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_6_MASK      0x00007F00
-#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_5_MASK      0x0000007F
-#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_20                         0x14
-#define DDR0_20_DLL_DQS_BYPASS_3_MASK      0x7F000000
-#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_2_MASK      0x007F0000
-#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_1_MASK      0x00007F00
-#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_0_MASK      0x0000007F
-#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_21                         0x15
-#define DDR0_21_DLL_DQS_BYPASS_7_MASK      0x7F000000
-#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n)   ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_6_MASK      0x007F0000
-#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n)   ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_5_MASK      0x00007F00
-#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n)   ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_4_MASK      0x0000007F
-#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n)   ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n)   ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_22                         0x16
-/* ECC */
-#define DDR0_22_CTRL_RAW_MASK             0x03000000
-#define DDR0_22_CTRL_RAW_ECC_DISABLE      0x00000000 /* ECC not being used */
-#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY   0x01000000 /* ECC checking is on, but no attempts to correct*/
-#define DDR0_22_CTRL_RAW_NO_ECC_RAM       0x02000000 /* No ECC RAM storage available */
-#define DDR0_22_CTRL_RAW_ECC_ENABLE       0x03000000 /* ECC checking and correcting on */
-#define DDR0_22_CTRL_RAW_ENCODE(n)          ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_22_CTRL_RAW_DECODE(n)          ((((unsigned long)(n))>>24)&0x3)
-
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_22_DQS_OUT_SHIFT_MASK        0x00007F00
-#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n)     ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_22_DQS_OUT_SHIFT_DECODE(n)     ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_22_DLL_DQS_BYPASS_8_MASK     0x0000007F
-#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n)  ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n)  ((((unsigned long)(n))>>0)&0x7F)
-
-
-#define DDR0_23                         0x17
-#define DDR0_23_ODT_RD_MAP_CS0_MASK       0x03000000
-#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n)   ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n)   ((((unsigned long)(n))>>24)&0x3)
-#define DDR0_23_ECC_C_SYND_MASK           0x00FF0000 /* Read only */
-#define DDR0_23_ECC_C_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_23_ECC_C_SYND_DECODE(n)        ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_23_ECC_U_SYND_MASK           0x0000FF00 /* Read only */
-#define DDR0_23_ECC_U_SYND_ENCODE(n)        ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_23_ECC_U_SYND_DECODE(n)        ((((unsigned long)(n))>>8)&0xFF)
-#define DDR0_23_FWC_MASK                  0x00000001 /* Write only */
-#define DDR0_23_FWC_ENCODE(n)               ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_23_FWC_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_24                         0x18
-#define DDR0_24_RTT_PAD_TERMINATION_MASK  0x03000000
-#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS1_MASK       0x00030000
-#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<16)
-#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>16)&0x3)
-#define DDR0_24_ODT_RD_MAP_CS1_MASK       0x00000300
-#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n)    ((((unsigned long)(n))&0x3)<<8)
-#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n)    ((((unsigned long)(n))>>8)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS0_MASK       0x00000003
-#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n)    ((((unsigned long)(n))&0x3)<<0)
-#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n)    ((((unsigned long)(n))>>0)&0x3)
-
-#define DDR0_25                         0x19
-#define DDR0_25_VERSION_MASK              0xFFFF0000 /* Read only */
-#define DDR0_25_VERSION_ENCODE(n)           ((((unsigned long)(n))&0xFFFF)<<16)
-#define DDR0_25_VERSION_DECODE(n)           ((((unsigned long)(n))>>16)&0xFFFF)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK  0x000003FF /* Read only */
-#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
-
-#define DDR0_26                         0x1A
-#define DDR0_26_TRAS_MAX_MASK             0xFFFF0000
-#define DDR0_26_TRAS_MAX_ENCODE(n)          ((((unsigned long)(n))&0xFFFF)<<16)
-#define DDR0_26_TRAS_MAX_DECODE(n)          ((((unsigned long)(n))>>16)&0xFFFF)
-#define DDR0_26_TREF_MASK                 0x00003FFF
-#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FF)<<0)
-#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FF)
-
-#define DDR0_27                         0x1B
-#define DDR0_27_EMRS_DATA_MASK            0x3FFF0000
-#define DDR0_27_EMRS_DATA_ENCODE(n)         ((((unsigned long)(n))&0x3FFF)<<16)
-#define DDR0_27_EMRS_DATA_DECODE(n)         ((((unsigned long)(n))>>16)&0x3FFF)
-#define DDR0_27_TINIT_MASK                0x0000FFFF
-#define DDR0_27_TINIT_ENCODE(n)             ((((unsigned long)(n))&0xFFFF)<<0)
-#define DDR0_27_TINIT_DECODE(n)             ((((unsigned long)(n))>>0)&0xFFFF)
-
-#define DDR0_28                         0x1C
-#define DDR0_28_EMRS3_DATA_MASK           0x3FFF0000
-#define DDR0_28_EMRS3_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<16)
-#define DDR0_28_EMRS3_DATA_DECODE(n)        ((((unsigned long)(n))>>16)&0x3FFF)
-#define DDR0_28_EMRS2_DATA_MASK           0x00003FFF
-#define DDR0_28_EMRS2_DATA_ENCODE(n)        ((((unsigned long)(n))&0x3FFF)<<0)
-#define DDR0_28_EMRS2_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0x3FFF)
-
-#define DDR0_29                         0x1D
-
-#define DDR0_30                         0x1E
-
-#define DDR0_31                         0x1F
-#define DDR0_31_XOR_CHECK_BITS_MASK       0x0000FFFF
-#define DDR0_31_XOR_CHECK_BITS_ENCODE(n)    ((((unsigned long)(n))&0xFFFF)<<0)
-#define DDR0_31_XOR_CHECK_BITS_DECODE(n)    ((((unsigned long)(n))>>0)&0xFFFF)
-
-#define DDR0_32                         0x20
-#define DDR0_32_OUT_OF_RANGE_ADDR_MASK    0xFFFFFFFF /* Read only */
-#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_33                         0x21
-#define DDR0_33_OUT_OF_RANGE_ADDR_MASK    0x00000001 /* Read only */
-#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n)               ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_34                         0x22
-#define DDR0_34_ECC_U_ADDR_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_34_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_34_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_35                         0x23
-#define DDR0_35_ECC_U_ADDR_MASK           0x00000001 /* Read only */
-#define DDR0_35_ECC_U_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_35_ECC_U_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_36                         0x24
-#define DDR0_36_ECC_U_DATA_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_36_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_36_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_37                         0x25
-#define DDR0_37_ECC_U_DATA_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_37_ECC_U_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_37_ECC_U_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_38                         0x26
-#define DDR0_38_ECC_C_ADDR_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_38_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_38_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_39                         0x27
-#define DDR0_39_ECC_C_ADDR_MASK           0x00000001 /* Read only */
-#define DDR0_39_ECC_C_ADDR_ENCODE(n)        ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_39_ECC_C_ADDR_DECODE(n)        ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_40                         0x28
-#define DDR0_40_ECC_C_DATA_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_40_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_40_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_41                         0x29
-#define DDR0_41_ECC_C_DATA_MASK           0xFFFFFFFF /* Read only */
-#define DDR0_41_ECC_C_DATA_ENCODE(n)        ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_41_ECC_C_DATA_DECODE(n)        ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_42                         0x2A
-#define DDR0_42_ADDR_PINS_MASK            0x07000000
-#define DDR0_42_ADDR_PINS_ENCODE(n)         ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_42_ADDR_PINS_DECODE(n)         ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_42_CASLAT_LIN_GATE_MASK      0x0000000F
-#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n)   ((((unsigned long)(n))&0xF)<<0)
-#define DDR0_42_CASLAT_LIN_GATE_DECODE(n)   ((((unsigned long)(n))>>0)&0xF)
-
-#define DDR0_43                         0x2B
-#define DDR0_43_TWR_MASK                  0x07000000
-#define DDR0_43_TWR_ENCODE(n)               ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_43_TWR_DECODE(n)               ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_43_APREBIT_MASK              0x000F0000
-#define DDR0_43_APREBIT_ENCODE(n)           ((((unsigned long)(n))&0xF)<<16)
-#define DDR0_43_APREBIT_DECODE(n)           ((((unsigned long)(n))>>16)&0xF)
-#define DDR0_43_COLUMN_SIZE_MASK          0x00000700
-#define DDR0_43_COLUMN_SIZE_ENCODE(n)       ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_43_COLUMN_SIZE_DECODE(n)       ((((unsigned long)(n))>>8)&0x7)
-#define DDR0_43_EIGHT_BANK_MODE_MASK      0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_8_BANKS     0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_4_BANKS     0x00000000
-#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n)   ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_43_EIGHT_BANK_MODE_DECODE(n)   ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_44                         0x2C
-#define DDR0_44_TRCD_MASK                 0x000000FF
-#define DDR0_44_TRCD_ENCODE(n)              ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_44_TRCD_DECODE(n)              ((((unsigned long)(n))>>0)&0xFF)
-
-#endif /* _SPD_SDRAM_DENALI_H_ */
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index 4e47ab3..e46efef 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -23,9 +23,13 @@
  */
 
 #include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <ppc440.h>
+#include <asm/gpio.h>
 #include <asm/processor.h>
 #include <asm/io.h>
-#include <ppc440.h>
+#include <asm/ppc4xx-intvec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -43,36 +47,6 @@ int board_early_init_f(void)
 	mtdcr(ebccfgd, 0xb8400000);
 
 	/*--------------------------------------------------------------------
-	 * Setup the GPIO pins
-	 *-------------------------------------------------------------------*/
-	/* test-only: take GPIO init from pcs440ep ???? in config file */
-	out32(GPIO0_OR, 0x00000000);
-	out32(GPIO0_TCR, 0x0000000f);
-	out32(GPIO0_OSRL, 0x50015400);
-	out32(GPIO0_OSRH, 0x550050aa);
-	out32(GPIO0_TSRL, 0x50015400);
-	out32(GPIO0_TSRH, 0x55005000);
-	out32(GPIO0_ISR1L, 0x50000000);
-	out32(GPIO0_ISR1H, 0x00000000);
-	out32(GPIO0_ISR2L, 0x00000000);
-	out32(GPIO0_ISR2H, 0x00000100);
-	out32(GPIO0_ISR3L, 0x00000000);
-	out32(GPIO0_ISR3H, 0x00000000);
-
-	out32(GPIO1_OR, 0x00000000);
-	out32(GPIO1_TCR, 0xc2000000);
-	out32(GPIO1_OSRL, 0x5c280000);
-	out32(GPIO1_OSRH, 0x00000000);
-	out32(GPIO1_TSRL, 0x0c000000);
-	out32(GPIO1_TSRH, 0x00000000);
-	out32(GPIO1_ISR1L, 0x00005550);
-	out32(GPIO1_ISR1H, 0x00000000);
-	out32(GPIO1_ISR2L, 0x00050000);
-	out32(GPIO1_ISR2H, 0x00000000);
-	out32(GPIO1_ISR3L, 0x01400000);
-	out32(GPIO1_ISR3H, 0x00000000);
-
-	/*--------------------------------------------------------------------
 	 * Setup the interrupt controller polarities, triggers, etc.
 	 *-------------------------------------------------------------------*/
 	mtdcr(uic0sr, 0xffffffff);	/* clear all */
@@ -100,16 +74,16 @@ int board_early_init_f(void)
 	mtdcr(uic2sr, 0xffffffff);	/* clear all */
 
 	/* 50MHz tmrclk */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+	out_8((u8 *) CFG_BCSR_BASE + 0x04, 0x00);
 
 	/* clear write protects */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
+	out_8((u8 *) CFG_BCSR_BASE + 0x07, 0x00);
 
 	/* enable Ethernet */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00;
+	out_8((u8 *) CFG_BCSR_BASE + 0x08, 0x00);
 
 	/* enable USB device */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20;
+	out_8((u8 *) CFG_BCSR_BASE + 0x09, 0x20);
 
 	/* select Ethernet pins */
 	mfsdr(SDR0_PFC1, sdr0_pfc1);
@@ -414,6 +388,16 @@ int testdram(void)
 }
 #endif
 
+#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP)
+/*
+ * Assign interrupts to PCI devices.
+ */
+void sequoia_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+	pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIR2);
+}
+#endif
+
 /*************************************************************************
  *  pci_pre_init
  *
@@ -465,6 +449,9 @@ int pci_pre_init(struct pci_controller *hose)
 	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
 	mtdcr(plb1_acr, addr);
 
+#ifdef CONFIG_PCI_PNP
+	hose->fixup_irq = sequoia_pci_fixup_irq;
+#endif
 	return 1;
 }
 #endif /* defined(CONFIG_PCI) */
@@ -583,3 +570,24 @@ int post_hotkeys_pressed(void)
 	return 0;	/* No hotkeys supported */
 }
 #endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/amcc/taihu/u-boot.lds b/board/amcc/taihu/u-boot.lds
index be03092..b08c999 100644
--- a/board/amcc/taihu/u-boot.lds
+++ b/board/amcc/taihu/u-boot.lds
@@ -62,19 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c
index 57b9d1c..040b800 100644
--- a/board/amcc/taishan/showinfo.c
+++ b/board/amcc/taishan/showinfo.c
@@ -33,25 +33,25 @@ void show_reset_reg(void)
 
 	/* read clock regsiter */
 	printf("===== Display reset and initialize register Start =========\n");
-	mfclk(clk_pllc,reg);
+	mfcpr(clk_pllc,reg);
 	printf("cpr_pllc   = %#010x\n",reg);
 
-	mfclk(clk_plld,reg);
+	mfcpr(clk_plld,reg);
 	printf("cpr_plld   = %#010x\n",reg);
 
-	mfclk(clk_primad,reg);
+	mfcpr(clk_primad,reg);
 	printf("cpr_primad = %#010x\n",reg);
 
-	mfclk(clk_primbd,reg);
+	mfcpr(clk_primbd,reg);
 	printf("cpr_primbd = %#010x\n",reg);
 
-	mfclk(clk_opbd,reg);
+	mfcpr(clk_opbd,reg);
 	printf("cpr_opbd   = %#010x\n",reg);
 
-	mfclk(clk_perd,reg);
+	mfcpr(clk_perd,reg);
 	printf("cpr_perd   = %#010x\n",reg);
 
-	mfclk(clk_mald,reg);
+	mfcpr(clk_mald,reg);
 	printf("cpr_mald   = %#010x\n",reg);
 
 	/* read sdr register */
diff --git a/board/amcc/taishan/u-boot.lds b/board/amcc/taishan/u-boot.lds
index 664716e..b2be352 100644
--- a/board/amcc/taishan/u-boot.lds
+++ b/board/amcc/taishan/u-boot.lds
@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/taishan/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/walnut/u-boot.lds b/board/amcc/walnut/u-boot.lds
index 1dcbab5..fa75dde 100644
--- a/board/amcc/walnut/u-boot.lds
+++ b/board/amcc/walnut/u-boot.lds
@@ -62,19 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/yosemite/u-boot.lds b/board/amcc/yosemite/u-boot.lds
index a9a7b0a..978319f 100644
--- a/board/amcc/yosemite/u-boot.lds
+++ b/board/amcc/yosemite/u-boot.lds
@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o	(.text)
     board/amcc/yosemite/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/yucca/u-boot.lds b/board/amcc/yucca/u-boot.lds
index 9df4f92..c9cf4db 100644
--- a/board/amcc/yucca/u-boot.lds
+++ b/board/amcc/yucca/u-boot.lds
@@ -68,19 +68,6 @@ SECTIONS
 
     cpu/ppc4xx/start.o		(.text)
     board/amcc/yucca/init.o	(.text)
-    cpu/ppc4xx/kgdb.o		(.text)
-    cpu/ppc4xx/traps.o		(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o		(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index d7cc384..52486cc 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -27,29 +27,17 @@
 
 #include <common.h>
 #include <ppc4xx.h>
-#include <asm/processor.h>
 #include <i2c.h>
-#include <asm-ppc/io.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/4xx_pcie.h>
 
 #include "yucca.h"
-#include "../cpu/ppc4xx/440spe_pcie.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#undef PCIE_ENDPOINT
-/* #define PCIE_ENDPOINT 1 */
-
 void fpga_init (void);
 
-void get_sys_info(PPC440_SYS_INFO *board_cfg );
-int compare_to_true(char *str );
-char *remove_l_w_space(char *in_str );
-char *remove_t_w_space(char *in_str );
-int get_console_port(void);
-
-int ppc440spe_init_pcie_rootport(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
-
 #define DEBUG_ENV
 #ifdef DEBUG_ENV
 #define DEBUGF(fmt,args...) printf(fmt ,##args)
@@ -541,10 +529,10 @@ int board_early_init_f (void)
 	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
 	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
 
-	/* SDR0_MFR should be part of Ethernet init */
-	mfsdr (sdr_mfr, mfr);
-	mfr &= ~SDR0_MFR_ECS_MASK;
-	/*mtsdr(sdr_mfr, mfr);*/
+	mfsdr(sdr_mfr, mfr);
+	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
+	mtsdr(sdr_mfr, mfr);
+
 	fpga_init();
 
 	return 0;
@@ -850,6 +838,7 @@ void pcie_setup_hoses(int busno)
 {
 	struct pci_controller *hose;
 	int i, bus;
+	int ret = 0;
 	char *env;
 	unsigned int delay;
 
@@ -863,14 +852,16 @@ void pcie_setup_hoses(int busno)
 		if (!yucca_pcie_card_present(i))
 			continue;
 
-#ifdef PCIE_ENDPOINT
- 		yucca_setup_pcie_fpga_endpoint(i);
- 		if (ppc440spe_init_pcie_endport(i)) {
-#else
-		yucca_setup_pcie_fpga_rootpoint(i);
-		if (ppc440spe_init_pcie_rootport(i)) {
-#endif
-			printf("PCIE%d: initialization failed\n", i);
+		if (is_end_point(i)) {
+			yucca_setup_pcie_fpga_endpoint(i);
+			ret = ppc4xx_init_pcie_endport(i);
+		} else {
+			yucca_setup_pcie_fpga_rootpoint(i);
+			ret = ppc4xx_init_pcie_rootport(i);
+		}
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
 			continue;
 		}
 
@@ -884,35 +875,33 @@ void pcie_setup_hoses(int busno)
 			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
 			CFG_PCIE_MEMSIZE,
-			PCI_REGION_MEM
-			);
+			PCI_REGION_MEM);
 		hose->region_count = 1;
 		pci_register_hose(hose);
 
-#ifdef PCIE_ENDPOINT
-		ppc440spe_setup_pcie_endpoint(hose, i);
-		/*
-		 * Reson for no scanning is endpoint can not generate
-		 * upstream configuration accesses.
-		 */
-#else
-		ppc440spe_setup_pcie_rootpoint(hose, i);
-
-		env = getenv ("pciscandelay");
-		if (env != NULL) {
-			delay = simple_strtoul (env, NULL, 10);
-			if (delay > 5)
-				printf ("Warning, expect noticable delay before PCIe"
-					"scan due to 'pciscandelay' value!\n");
-			mdelay (delay * 1000);
-		}
+		if (is_end_point(i)) {
+			ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+		 	 */
+		} else {
+			ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv("pciscandelay");
+			if (env != NULL) {
+				delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+				    	printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
 
-		/*
-		 * Config access can only go down stream
-		 */
-		hose->last_busno = pci_hose_scan(hose);
-		bus = hose->last_busno + 1;
-#endif
+			/*
+			 * Config access can only go down stream
+		 	 */
+			hose->last_busno = pci_hose_scan(hose);
+			bus = hose->last_busno + 1;
+		}
 	}
 }
 #endif	/* defined(CONFIG_PCI) */